! Started logfile: J2120-2450_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:44 2019 obs J2120-2450_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2120-2450_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.459004 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2120-2450 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2120-2450_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 629 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 629 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 629 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 904 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994266Jy sigma=0.007995 ! Fit after self-cal, rms=0.950971Jy sigma=0.007658 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.469 mas, bmaj=16.42 mas, bpa=-18.69 degrees ! Estimated noise=1385.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408875 Jy ! Component: 100 - total flux cleaned = 0.0501813 Jy ! Total flux subtracted in 100 components = 0.0501813 Jy ! Clean residual min=-0.004621 max=0.006166 Jy/beam ! Clean residual mean=-0.000044 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.0501813 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0501813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097532Jy sigma=0.000690 ! Fit after self-cal, rms=0.096180Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=18.25 mas, bpa=-18.01 degrees ! Estimated noise=1024.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509084 Jy ! Component: 100 - total flux cleaned = 0.00736153 Jy ! Component: 150 - total flux cleaned = 0.00804781 Jy ! Component: 200 - total flux cleaned = 0.00828202 Jy ! Total flux subtracted in 200 components = 0.00828202 Jy ! Clean residual min=-0.004228 max=0.004257 Jy/beam ! Clean residual mean=-0.000066 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.0584634 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.0584634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095838Jy sigma=0.000679 ! Fit after self-cal, rms=0.095771Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.93 KP 1.12 ! LA 1.06 MK 1.12 NL 0.97 OV 1.11 ! PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00 KP 1.25 ! LA 1.10 MK 1.07 NL 1.04 OV 1.18 ! PT 0.79 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.90 KP 1.14 ! LA 0.76 MK 1.04 NL 1.17 OV 1.03 ! PT 0.81 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.78 KP 1.00* ! LA 0.80 MK 0.81 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.095771Jy sigma=0.000678 ! Fit after self-cal, rms=0.092311Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=18.23 mas, bpa=-17.81 degrees ! Estimated noise=1017.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281186 Jy ! Component: 100 - total flux cleaned = 0.00021355 Jy ! Component: 150 - total flux cleaned = 0.000183484 Jy ! Component: 200 - total flux cleaned = 0.00015541 Jy ! Total flux subtracted in 200 components = 0.00015541 Jy ! Clean residual min=-0.002244 max=0.002301 Jy/beam ! Clean residual mean=-0.000015 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0586188 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 0.0586188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092284Jy sigma=0.000671 ! Fit after self-cal, rms=0.092711Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092711Jy sigma=0.000669 ! Fit after self-cal, rms=0.095589Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=18.19 mas, bpa=-17.77 degrees ! Estimated noise=1026.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71407e-05 Jy ! Component: 100 - total flux cleaned = 7.06147e-06 Jy ! Component: 150 - total flux cleaned = -1.57907e-05 Jy ! Component: 200 - total flux cleaned = -3.67451e-05 Jy ! Total flux subtracted in 200 components = -3.67451e-05 Jy ! Clean residual min=-0.002463 max=0.002248 Jy/beam ! Clean residual mean=-0.000009 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.058582 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 0.058582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095570Jy sigma=0.000668 ! Fit after self-cal, rms=0.096072Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.95619e-05 Jy ! Component: 100 - total flux cleaned = 7.17601e-06 Jy ! Component: 150 - total flux cleaned = 7.47595e-06 Jy ! Component: 200 - total flux cleaned = 7.68453e-06 Jy ! Total flux subtracted in 200 components = 7.68453e-06 Jy ! Clean residual min=-0.002807 max=0.002114 Jy/beam ! Clean residual mean=-0.000019 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.0585897 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.0585897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096056Jy sigma=0.000667 ! Fit after self-cal, rms=0.096043Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096043Jy sigma=0.000667 ! Fit after self-cal, rms=0.098705Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=18.08 mas, bpa=-17.85 degrees ! Estimated noise=1029.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107938 Jy ! Component: 100 - total flux cleaned = -0.000107832 Jy ! Component: 150 - total flux cleaned = -0.000108758 Jy ! Component: 200 - total flux cleaned = -0.000148372 Jy ! Total flux subtracted in 200 components = -0.000148372 Jy ! Clean residual min=-0.002618 max=0.002223 Jy/beam ! Clean residual mean=-0.000007 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0584413 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.0584414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098689Jy sigma=0.000667 ! Fit after self-cal, rms=0.098952Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261755 Jy ! Component: 100 - total flux cleaned = 0.000261341 Jy ! Component: 150 - total flux cleaned = 0.000197062 Jy ! Component: 200 - total flux cleaned = 0.000158296 Jy ! Total flux subtracted in 200 components = 0.000158296 Jy ! Clean residual min=-0.002535 max=0.002064 Jy/beam ! Clean residual mean=-0.000011 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.0585996 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.0585996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098938Jy sigma=0.000666 ! Fit after self-cal, rms=0.098940Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098940Jy sigma=0.000666 ! Fit after self-cal, rms=0.100065Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.026 mas, bmaj=31.64 mas, bpa=-6.941 degrees ! Estimated noise=1225.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135396 Jy ! Component: 100 - total flux cleaned = 0.000107499 Jy ! Component: 150 - total flux cleaned = 9.58796e-05 Jy ! Component: 200 - total flux cleaned = 7.47911e-05 Jy ! Total flux subtracted in 200 components = 7.47911e-05 Jy ! Clean residual min=-0.002670 max=0.002595 Jy/beam ! Clean residual mean=-0.000010 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0586744 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0586744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100061Jy sigma=0.000666 ! Fit after self-cal, rms=0.100211Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.64868e-05 Jy ! Component: 100 - total flux cleaned = -3.88546e-06 Jy ! Component: 150 - total flux cleaned = -1.48641e-05 Jy ! Component: 200 - total flux cleaned = -2.42779e-05 Jy ! Total flux subtracted in 200 components = -2.42779e-05 Jy ! Clean residual min=-0.002700 max=0.002566 Jy/beam ! Clean residual mean=-0.000014 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0586502 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.0586502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100207Jy sigma=0.000666 ! Fit after self-cal, rms=0.100214Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=18.01 mas, bpa=-17.92 degrees ! Estimated noise=1028.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 18.01 at -17.92 degrees (North through East) ! Clean map min=-0.0025954 max=0.052275 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=16.08 mas, bpa=-18.59 degrees ! Estimated noise=1370.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409912 Jy ! Component: 100 - total flux cleaned = 0.0508951 Jy ! Component: 150 - total flux cleaned = 0.0556451 Jy ! Component: 200 - total flux cleaned = 0.0565436 Jy ! Total flux subtracted in 200 components = 0.0565436 Jy ! Clean residual min=-0.003554 max=0.003532 Jy/beam ! Clean residual mean=-0.000009 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.0565436 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0565436 Jy ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=18.01 mas, bpa=-17.92 degrees ! Estimated noise=1028.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778137 Jy ! Component: 100 - total flux cleaned = 0.00129604 Jy ! Component: 150 - total flux cleaned = 0.00158308 Jy ! Component: 200 - total flux cleaned = 0.00172029 Jy ! Total flux subtracted in 200 components = 0.00172029 Jy ! Clean residual min=-0.002687 max=0.002299 Jy/beam ! Clean residual mean=-0.000009 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0582639 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.0582639 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.026 mas, bmaj=31.64 mas, bpa=-6.941 degrees ! Estimated noise=1225.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290558 Jy ! Component: 100 - total flux cleaned = 0.000290859 Jy ! Component: 150 - total flux cleaned = 0.000272954 Jy ! Component: 200 - total flux cleaned = 0.000258978 Jy ! Total flux subtracted in 200 components = 0.000258978 Jy ! Clean residual min=-0.002700 max=0.002514 Jy/beam ! Clean residual mean=-0.000015 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0585229 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.09664e-07 Jy ! Component: 100 - total flux cleaned = -1.09408e-05 Jy ! Component: 150 - total flux cleaned = -2.75742e-05 Jy ! Component: 200 - total flux cleaned = -4.29718e-05 Jy ! Total flux subtracted in 200 components = -4.29718e-05 Jy ! Clean residual min=-0.002697 max=0.002523 Jy/beam ! Clean residual mean=-0.000015 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.0584799 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 77 components and 0.0584799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.175 mas, bmaj=18.01 mas, bpa=-17.92 degrees ! Estimated noise=1028.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350525 Jy ! Component: 100 - total flux cleaned = -0.000320583 Jy ! Component: 150 - total flux cleaned = -0.000321539 Jy ! Component: 200 - total flux cleaned = -0.000321061 Jy ! Total flux subtracted in 200 components = -0.000321061 Jy ! Clean residual min=-0.002596 max=0.002204 Jy/beam ! Clean residual mean=-0.000009 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.0581588 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 86 components and 0.0581588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100217Jy sigma=0.000666 ! Fit after self-cal, rms=0.100239Jy sigma=0.000666 wmodel J2120-2450_S_2017_10_21_pus_map.mod ! Writing 86 model components to file: J2120-2450_S_2017_10_21_pus_map.mod wobs J2120-2450_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2120-2450_S_2017_10_21_pus_uvs.fits wwins J2120-2450_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2120-2450_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113896 Jy ! Component: 100 - total flux cleaned = -0.00195698 Jy ! Component: 150 - total flux cleaned = -0.00241473 Jy ! Component: 200 - total flux cleaned = -0.00270152 Jy ! Component: 250 - total flux cleaned = -0.00304515 Jy ! Component: 300 - total flux cleaned = -0.0032109 Jy ! Component: 350 - total flux cleaned = -0.00349804 Jy ! Component: 400 - total flux cleaned = -0.00377506 Jy ! Component: 450 - total flux cleaned = -0.00398433 Jy ! Component: 500 - total flux cleaned = -0.00430399 Jy ! Component: 550 - total flux cleaned = -0.00455799 Jy ! Component: 600 - total flux cleaned = -0.00472354 Jy ! Component: 650 - total flux cleaned = -0.00488527 Jy ! Component: 700 - total flux cleaned = -0.00509492 Jy ! Component: 750 - total flux cleaned = -0.00519691 Jy ! Component: 800 - total flux cleaned = -0.00527232 Jy ! Component: 850 - total flux cleaned = -0.00532205 Jy ! Component: 900 - total flux cleaned = -0.00527398 Jy ! Component: 950 - total flux cleaned = -0.00520304 Jy ! Component: 1000 - total flux cleaned = -0.0051568 Jy ! Component: 1050 - total flux cleaned = -0.00511141 Jy ! Component: 1100 - total flux cleaned = -0.00499941 Jy ! Component: 1150 - total flux cleaned = -0.0049775 Jy ! Component: 1200 - total flux cleaned = -0.00495587 Jy ! Component: 1250 - total flux cleaned = -0.00497651 Jy ! Component: 1300 - total flux cleaned = -0.00491337 Jy ! Component: 1350 - total flux cleaned = -0.00491383 Jy ! Component: 1400 - total flux cleaned = -0.00491383 Jy ! Component: 1450 - total flux cleaned = -0.00491383 Jy ! Component: 1500 - total flux cleaned = -0.0049534 Jy ! Component: 1550 - total flux cleaned = -0.00499209 Jy ! Component: 1600 - total flux cleaned = -0.00501127 Jy ! Component: 1650 - total flux cleaned = -0.00503045 Jy ! Component: 1700 - total flux cleaned = -0.00510568 Jy ! Component: 1750 - total flux cleaned = -0.00506863 Jy ! Component: 1800 - total flux cleaned = -0.00516024 Jy ! Component: 1850 - total flux cleaned = -0.00514218 Jy ! Component: 1900 - total flux cleaned = -0.00524967 Jy ! Component: 1950 - total flux cleaned = -0.00526714 Jy ! Component: 2000 - total flux cleaned = -0.00530216 Jy ! Component: 2050 - total flux cleaned = -0.00537119 Jy ! Component: 2100 - total flux cleaned = -0.00537142 Jy ! Component: 2150 - total flux cleaned = -0.0054054 Jy ! Component: 2200 - total flux cleaned = -0.00540537 Jy ! Component: 2250 - total flux cleaned = -0.00547164 Jy ! Component: 2300 - total flux cleaned = -0.00548794 Jy ! Component: 2350 - total flux cleaned = -0.00552024 Jy ! Component: 2400 - total flux cleaned = -0.00555221 Jy ! Component: 2450 - total flux cleaned = -0.0055679 Jy ! Component: 2500 - total flux cleaned = -0.00561481 Jy ! Component: 2550 - total flux cleaned = -0.00561483 Jy ! Component: 2600 - total flux cleaned = -0.00569151 Jy ! Component: 2650 - total flux cleaned = -0.0057065 Jy ! Component: 2700 - total flux cleaned = -0.00573657 Jy ! Component: 2750 - total flux cleaned = -0.00582605 Jy ! Component: 2800 - total flux cleaned = -0.00589951 Jy ! Component: 2850 - total flux cleaned = -0.00597235 Jy ! Component: 2900 - total flux cleaned = -0.00600124 Jy ! Component: 2950 - total flux cleaned = -0.00607257 Jy ! Component: 3000 - total flux cleaned = -0.00611504 Jy ! Component: 3050 - total flux cleaned = -0.00618526 Jy ! Component: 3100 - total flux cleaned = -0.00622692 Jy ! Component: 3150 - total flux cleaned = -0.00625443 Jy ! Component: 3200 - total flux cleaned = -0.0062543 Jy ! Component: 3250 - total flux cleaned = -0.0062816 Jy ! Component: 3300 - total flux cleaned = -0.00632202 Jy ! Component: 3350 - total flux cleaned = -0.00638874 Jy ! Component: 3400 - total flux cleaned = -0.00637543 Jy ! Component: 3450 - total flux cleaned = -0.00641472 Jy ! Component: 3500 - total flux cleaned = -0.00642767 Jy ! Component: 3550 - total flux cleaned = -0.00641484 Jy ! Component: 3600 - total flux cleaned = -0.00645316 Jy ! Component: 3650 - total flux cleaned = -0.00645329 Jy ! Component: 3700 - total flux cleaned = -0.00644085 Jy ! Component: 3750 - total flux cleaned = -0.00650315 Jy ! Component: 3800 - total flux cleaned = -0.00650321 Jy ! Component: 3850 - total flux cleaned = -0.00655208 Jy ! Component: 3900 - total flux cleaned = -0.00656416 Jy ! Component: 3950 - total flux cleaned = -0.00655214 Jy ! Component: 4000 - total flux cleaned = -0.00657602 Jy ! Component: 4050 - total flux cleaned = -0.00657606 Jy ! Total flux subtracted in 4096 components = -0.00658784 Jy ! Clean residual min=-0.000610 max=0.000766 Jy/beam ! Clean residual mean=-0.000003 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.051571 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 330 components and 0.051571 Jy ![Exited script file: muppet] wmap "J2120-2450_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 18.01 at -17.92 degrees (North through East) ! Clean map min=-0.0027078 max=0.052407 Jy/beam ! Writing clean map to FITS file: J2120-2450_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0524073 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021762 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24574 1.24574 2.49148 4.98296 9.96593 19.9319 39.8637 79.7274 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.175 x 18.01 at -17.92 degrees (North through East) ! Clean map min=-0.0027078 max=0.052407 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2120-2450_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:48 2019