! Started logfile: J2120-2450_S_2017_05_01_pus_uvs.log on Wed May 1 18:44:07 2019 obs J2120-2450_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2120-2450_S_2017_05_01_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.728736 visibilities/baseline/integration-bin. ! Found source: J2120-2450 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 15216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2120-2450_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 312 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 699 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995316Jy sigma=0.036554 ! Fit after self-cal, rms=0.953608Jy sigma=0.036540 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=8.552 mas, bpa=-10.88 degrees ! Estimated noise=926.511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221939 Jy ! Component: 100 - total flux cleaned = 0.0250371 Jy ! Total flux subtracted in 100 components = 0.0250371 Jy ! Clean residual min=-0.012007 max=0.011896 Jy/beam ! Clean residual mean=0.000088 rms=0.004239 Jy/beam ! Combined flux in latest and established models = 0.0250371 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0250371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112805Jy sigma=0.001083 ! Fit after self-cal, rms=0.112202Jy sigma=0.001054 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=9.48 mas, bpa=-6.926 degrees ! Estimated noise=589.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396187 Jy ! Component: 100 - total flux cleaned = 0.00338206 Jy ! Component: 150 - total flux cleaned = 0.00285925 Jy ! Component: 200 - total flux cleaned = 0.00224226 Jy ! Total flux subtracted in 200 components = 0.00224226 Jy ! Clean residual min=-0.011414 max=0.011431 Jy/beam ! Clean residual mean=0.000249 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 0.0272793 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 0.0272793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110434Jy sigma=0.001145 ! Fit after self-cal, rms=0.110211Jy sigma=0.001145 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.72 FD 0.77 HN 0.81 KP 0.81 ! LA 0.75 MK 0.82 NL 0.79 OV 0.77 ! PT 0.74 SC 0.74 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.77 HN 0.85 KP 0.72 ! LA 0.67 MK 0.87 NL 0.80 OV 0.75 ! PT 0.71 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.78 HN 0.82 KP 0.74 ! LA 0.70 MK 0.81 NL 0.83 OV 0.68 ! PT 0.76 SC 0.85 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 1.02 HN 0.55 KP 1.00* ! LA 14.36 MK 0.94 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.110211Jy sigma=0.001145 ! Fit after self-cal, rms=0.065098Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.213 mas, bmaj=8.12 mas, bpa=-3.859 degrees ! Estimated noise=582.989 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910545 Jy ! Component: 100 - total flux cleaned = 0.0010811 Jy ! Component: 150 - total flux cleaned = 0.00112535 Jy ! Component: 200 - total flux cleaned = 0.00114458 Jy ! Total flux subtracted in 200 components = 0.00114458 Jy ! Clean residual min=-0.001782 max=0.001814 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0284239 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0284239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065059Jy sigma=0.000645 ! Fit after self-cal, rms=0.064651Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064651Jy sigma=0.000642 ! Fit after self-cal, rms=0.061819Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=8.104 mas, bpa=-4.685 degrees ! Estimated noise=572.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411795 Jy ! Component: 100 - total flux cleaned = 0.000411592 Jy ! Component: 150 - total flux cleaned = 0.000424618 Jy ! Component: 200 - total flux cleaned = 0.0004475 Jy ! Total flux subtracted in 200 components = 0.0004475 Jy ! Clean residual min=-0.001527 max=0.001400 Jy/beam ! Clean residual mean=-0.000000 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0288714 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0288714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061810Jy sigma=0.000640 ! Fit after self-cal, rms=0.061794Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269229 Jy ! Component: 100 - total flux cleaned = 0.000303937 Jy ! Component: 150 - total flux cleaned = 0.00033349 Jy ! Component: 200 - total flux cleaned = 0.000346771 Jy ! Total flux subtracted in 200 components = 0.000346771 Jy ! Clean residual min=-0.001535 max=0.001464 Jy/beam ! Clean residual mean=0.000003 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0292182 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0292182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061784Jy sigma=0.000639 ! Fit after self-cal, rms=0.061791Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061791Jy sigma=0.000639 ! Fit after self-cal, rms=0.061791Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=8.086 mas, bpa=-4.973 degrees ! Estimated noise=572.193 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183382 Jy ! Component: 100 - total flux cleaned = 0.000210652 Jy ! Component: 150 - total flux cleaned = 0.000221838 Jy ! Component: 200 - total flux cleaned = 0.000231698 Jy ! Total flux subtracted in 200 components = 0.000231698 Jy ! Clean residual min=-0.001495 max=0.001348 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0294499 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 46 components and 0.0294499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061785Jy sigma=0.000638 ! Fit after self-cal, rms=0.061805Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.1412e-05 Jy ! Component: 100 - total flux cleaned = 4.43895e-05 Jy ! Component: 150 - total flux cleaned = 6.74287e-05 Jy ! Component: 200 - total flux cleaned = 7.78289e-05 Jy ! Total flux subtracted in 200 components = 7.78289e-05 Jy ! Clean residual min=-0.001524 max=0.001427 Jy/beam ! Clean residual mean=0.000002 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0295277 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.0295277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061800Jy sigma=0.000638 ! Fit after self-cal, rms=0.061785Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061785Jy sigma=0.000638 ! Fit after self-cal, rms=0.061932Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=18.16 mas, bpa=2.726 degrees ! Estimated noise=699.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252911 Jy ! Component: 100 - total flux cleaned = 0.000278436 Jy ! Component: 150 - total flux cleaned = 0.000284648 Jy ! Component: 200 - total flux cleaned = 0.000293893 Jy ! Total flux subtracted in 200 components = 0.000293893 Jy ! Clean residual min=-0.001763 max=0.001324 Jy/beam ! Clean residual mean=0.000003 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0298216 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.0298216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061933Jy sigma=0.000638 ! Fit after self-cal, rms=0.061946Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71988e-05 Jy ! Component: 100 - total flux cleaned = -1.0518e-05 Jy ! Component: 150 - total flux cleaned = 1.47366e-06 Jy ! Component: 200 - total flux cleaned = 1.04218e-05 Jy ! Total flux subtracted in 200 components = 1.04218e-05 Jy ! Clean residual min=-0.001763 max=0.001352 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.029832 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.029832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061947Jy sigma=0.000638 ! Fit after self-cal, rms=0.061949Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=8.071 mas, bpa=-5.14 degrees ! Estimated noise=573.595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 8.071 at -5.14 degrees (North through East) ! Clean map min=-0.0038538 max=0.035899 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.614 mas, bmaj=7.12 mas, bpa=-6.817 degrees ! Estimated noise=974.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260154 Jy ! Component: 100 - total flux cleaned = 0.0313346 Jy ! Component: 150 - total flux cleaned = 0.0321553 Jy ! Component: 200 - total flux cleaned = 0.0318964 Jy ! Total flux subtracted in 200 components = 0.0318964 Jy ! Clean residual min=-0.002640 max=0.002351 Jy/beam ! Clean residual mean=0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0318964 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0318964 Jy ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=8.071 mas, bpa=-5.14 degrees ! Estimated noise=573.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00049928 Jy ! Component: 100 - total flux cleaned = -0.00060076 Jy ! Component: 150 - total flux cleaned = -0.000735543 Jy ! Component: 200 - total flux cleaned = -0.000816344 Jy ! Total flux subtracted in 200 components = -0.000816344 Jy ! Clean residual min=-0.001556 max=0.001386 Jy/beam ! Clean residual mean=0.000004 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0310801 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.0310801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=18.16 mas, bpa=2.726 degrees ! Estimated noise=699.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417853 Jy ! Component: 100 - total flux cleaned = -0.000491683 Jy ! Component: 150 - total flux cleaned = -0.000530197 Jy ! Component: 200 - total flux cleaned = -0.000576463 Jy ! Total flux subtracted in 200 components = -0.000576463 Jy ! Clean residual min=-0.001833 max=0.001279 Jy/beam ! Clean residual mean=0.000006 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0305036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.85694e-05 Jy ! Component: 100 - total flux cleaned = -7.40993e-05 Jy ! Component: 150 - total flux cleaned = -0.000118395 Jy ! Component: 200 - total flux cleaned = -0.000149266 Jy ! Total flux subtracted in 200 components = -0.000149266 Jy ! Clean residual min=-0.001802 max=0.001296 Jy/beam ! Clean residual mean=0.000006 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0303544 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0303544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=8.071 mas, bpa=-5.14 degrees ! Estimated noise=573.595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.12707e-05 Jy ! Component: 100 - total flux cleaned = 2.5295e-05 Jy ! Component: 150 - total flux cleaned = -2.38138e-05 Jy ! Component: 200 - total flux cleaned = -6.671e-05 Jy ! Total flux subtracted in 200 components = -6.671e-05 Jy ! Clean residual min=-0.001533 max=0.001396 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0302877 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.0302877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061971Jy sigma=0.000638 ! Fit after self-cal, rms=0.061997Jy sigma=0.000638 wmodel J2120-2450_S_2017_05_01_pus_map.mod ! Writing 32 model components to file: J2120-2450_S_2017_05_01_pus_map.mod wobs J2120-2450_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2120-2450_S_2017_05_01_pus_uvs.fits wwins J2120-2450_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J2120-2450_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232103 Jy ! Component: 100 - total flux cleaned = -0.000159948 Jy ! Component: 150 - total flux cleaned = -4.15039e-07 Jy ! Component: 200 - total flux cleaned = 4.18243e-05 Jy ! Component: 250 - total flux cleaned = 0.000123753 Jy ! Component: 300 - total flux cleaned = 0.000302131 Jy ! Component: 350 - total flux cleaned = 0.000475174 Jy ! Component: 400 - total flux cleaned = 0.000587245 Jy ! Component: 450 - total flux cleaned = 0.000714549 Jy ! Component: 500 - total flux cleaned = 0.000838381 Jy ! Component: 550 - total flux cleaned = 0.00090728 Jy ! Component: 600 - total flux cleaned = 0.00100847 Jy ! Component: 650 - total flux cleaned = 0.00102487 Jy ! Component: 700 - total flux cleaned = 0.00108992 Jy ! Component: 750 - total flux cleaned = 0.00115323 Jy ! Component: 800 - total flux cleaned = 0.00116838 Jy ! Component: 850 - total flux cleaned = 0.00121401 Jy ! Component: 900 - total flux cleaned = 0.00128878 Jy ! Component: 950 - total flux cleaned = 0.00127394 Jy ! Component: 1000 - total flux cleaned = 0.00128835 Jy ! Component: 1050 - total flux cleaned = 0.00128845 Jy ! Component: 1100 - total flux cleaned = 0.00131668 Jy ! Component: 1150 - total flux cleaned = 0.00127493 Jy ! Component: 1200 - total flux cleaned = 0.0013023 Jy ! Component: 1250 - total flux cleaned = 0.00131538 Jy ! Component: 1300 - total flux cleaned = 0.00131525 Jy ! Component: 1350 - total flux cleaned = 0.00125023 Jy ! Component: 1400 - total flux cleaned = 0.0012891 Jy ! Component: 1450 - total flux cleaned = 0.00127644 Jy ! Component: 1500 - total flux cleaned = 0.0012889 Jy ! Component: 1550 - total flux cleaned = 0.00127689 Jy ! Component: 1600 - total flux cleaned = 0.00128917 Jy ! Component: 1650 - total flux cleaned = 0.00130117 Jy ! Component: 1700 - total flux cleaned = 0.00133665 Jy ! Component: 1750 - total flux cleaned = 0.00134849 Jy ! Component: 1800 - total flux cleaned = 0.00133693 Jy ! Component: 1850 - total flux cleaned = 0.00138293 Jy ! Component: 1900 - total flux cleaned = 0.00138294 Jy ! Component: 1950 - total flux cleaned = 0.0013942 Jy ! Component: 2000 - total flux cleaned = 0.00140517 Jy ! Component: 2050 - total flux cleaned = 0.00138349 Jy ! Component: 2100 - total flux cleaned = 0.00145955 Jy ! Component: 2150 - total flux cleaned = 0.00147026 Jy ! Component: 2200 - total flux cleaned = 0.00147023 Jy ! Component: 2250 - total flux cleaned = 0.00149126 Jy ! Component: 2300 - total flux cleaned = 0.00153304 Jy ! Component: 2350 - total flux cleaned = 0.00155357 Jy ! Component: 2400 - total flux cleaned = 0.00158414 Jy ! Component: 2450 - total flux cleaned = 0.00161418 Jy ! Component: 2500 - total flux cleaned = 0.00160414 Jy ! Component: 2550 - total flux cleaned = 0.00161395 Jy ! Component: 2600 - total flux cleaned = 0.00167273 Jy ! Component: 2650 - total flux cleaned = 0.00166304 Jy ! Component: 2700 - total flux cleaned = 0.00172096 Jy ! Component: 2750 - total flux cleaned = 0.00171135 Jy ! Component: 2800 - total flux cleaned = 0.0017303 Jy ! Component: 2850 - total flux cleaned = 0.00178679 Jy ! Component: 2900 - total flux cleaned = 0.00175875 Jy ! Component: 2950 - total flux cleaned = 0.00180506 Jy ! Component: 3000 - total flux cleaned = 0.001796 Jy ! Component: 3050 - total flux cleaned = 0.00182335 Jy ! Component: 3100 - total flux cleaned = 0.00186839 Jy ! Component: 3150 - total flux cleaned = 0.00188626 Jy ! Component: 3200 - total flux cleaned = 0.00191292 Jy ! Component: 3250 - total flux cleaned = 0.00195696 Jy ! Component: 3300 - total flux cleaned = 0.0020005 Jy ! Component: 3350 - total flux cleaned = 0.0019918 Jy ! Component: 3400 - total flux cleaned = 0.00200049 Jy ! Component: 3450 - total flux cleaned = 0.00204311 Jy ! Component: 3500 - total flux cleaned = 0.00207701 Jy ! Component: 3550 - total flux cleaned = 0.00208539 Jy ! Component: 3600 - total flux cleaned = 0.00208542 Jy ! Component: 3650 - total flux cleaned = 0.00208539 Jy ! Component: 3700 - total flux cleaned = 0.0020773 Jy ! Component: 3750 - total flux cleaned = 0.00211005 Jy ! Component: 3800 - total flux cleaned = 0.00212625 Jy ! Component: 3850 - total flux cleaned = 0.0021343 Jy ! Component: 3900 - total flux cleaned = 0.00214237 Jy ! Component: 3950 - total flux cleaned = 0.00216618 Jy ! Component: 4000 - total flux cleaned = 0.00217417 Jy ! Component: 4050 - total flux cleaned = 0.00219773 Jy ! Total flux subtracted in 4096 components = 0.00223682 Jy ! Clean residual min=-0.000482 max=0.000434 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.0325245 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 329 components and 0.0325245 Jy ![Exited script file: muppet] wmap "J2120-2450_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 8.071 at -5.14 degrees (North through East) ! Clean map min=-0.0036107 max=0.035104 Jy/beam ! Writing clean map to FITS file: J2120-2450_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0351041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139431 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.19158 1.19158 2.38315 4.7663 9.53261 19.0652 38.1304 76.2608 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 8.071 at -5.14 degrees (North through East) ! Clean map min=-0.0036107 max=0.035104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2120-2450_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:44:11 2019