! Started logfile: J2120+4434_S_2017_09_26_pus_uvs.log on Sat May 11 13:06:48 2019 obs J2120+4434_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2120+4434_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.664021 visibilities/baseline/integration-bin. ! Found source: J2120+4434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2120+4434_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 562 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 619 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1831 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971884Jy sigma=0.009356 ! Fit after self-cal, rms=0.943667Jy sigma=0.009084 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=5.17 mas, bpa=-36.23 degrees ! Estimated noise=962.552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329888 Jy ! Component: 100 - total flux cleaned = 0.0443464 Jy ! Total flux subtracted in 100 components = 0.0443464 Jy ! Clean residual min=-0.005787 max=0.008625 Jy/beam ! Clean residual mean=-0.000021 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.0443464 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0443464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090749Jy sigma=0.000866 ! Fit after self-cal, rms=0.090190Jy sigma=0.000860 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.044 mas, bmaj=6.679 mas, bpa=-39.47 degrees ! Estimated noise=515.019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271586 Jy ! Component: 100 - total flux cleaned = 0.0431935 Jy ! Component: 150 - total flux cleaned = 0.052802 Jy ! Component: 200 - total flux cleaned = 0.0585643 Jy ! Total flux subtracted in 200 components = 0.0585643 Jy ! Clean residual min=-0.010272 max=0.016097 Jy/beam ! Clean residual mean=-0.000085 rms=0.004353 Jy/beam ! Combined flux in latest and established models = 0.102911 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.102911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081990Jy sigma=0.000769 ! Fit after self-cal, rms=0.081225Jy sigma=0.000762 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.94 FD 1.03 HN 0.77 KP 1.00 ! LA 0.75 MK 1.21 NL 1.97 OV 2.50 ! PT 0.68 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.78 FD 1.08 HN 0.78 KP 0.95 ! LA 0.73 MK 1.15 NL 2.18 OV 2.38 ! PT 0.65 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.61 FD 1.09 HN 0.73 KP 0.92 ! LA 0.74 MK 1.37 NL 2.11 OV 2.48 ! PT 0.63 ! ! ! Correcting IF 4. ! A total of 177 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.38 KP 1.00* ! LA 0.71 MK 1.49 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.081225Jy sigma=0.000762 ! Fit after self-cal, rms=0.136914Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.001 mas, bmaj=6.658 mas, bpa=-35.75 degrees ! Estimated noise=531.651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117806 Jy ! Component: 100 - total flux cleaned = 0.00121478 Jy ! Component: 150 - total flux cleaned = 0.00121404 Jy ! Component: 200 - total flux cleaned = 0.00124339 Jy ! Total flux subtracted in 200 components = 0.00124339 Jy ! Clean residual min=-0.004861 max=0.005909 Jy/beam ! Clean residual mean=-0.000001 rms=0.001664 Jy/beam ! Combined flux in latest and established models = 0.104154 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.104154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136766Jy sigma=0.000667 ! Fit after self-cal, rms=0.140994Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140994Jy sigma=0.000657 ! Fit after self-cal, rms=0.163460Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.11 mas, bmaj=6.445 mas, bpa=-31.62 degrees ! Estimated noise=527.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027481 Jy ! Component: 100 - total flux cleaned = 0.00043197 Jy ! Component: 150 - total flux cleaned = 0.000552334 Jy ! Component: 200 - total flux cleaned = 0.000654159 Jy ! Total flux subtracted in 200 components = 0.000654159 Jy ! Clean residual min=-0.003433 max=0.003977 Jy/beam ! Clean residual mean=-0.000006 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.104808 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.104808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163415Jy sigma=0.000651 ! Fit after self-cal, rms=0.163982Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240471 Jy ! Component: 100 - total flux cleaned = -0.000223534 Jy ! Component: 150 - total flux cleaned = -0.000206455 Jy ! Component: 200 - total flux cleaned = -0.000175998 Jy ! Total flux subtracted in 200 components = -0.000175998 Jy ! Clean residual min=-0.003460 max=0.003876 Jy/beam ! Clean residual mean=-0.000006 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.104632 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.104632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163967Jy sigma=0.000651 ! Fit after self-cal, rms=0.163982Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163982Jy sigma=0.000651 ! Fit after self-cal, rms=0.169484Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.191 mas, bmaj=6.431 mas, bpa=-32.73 degrees ! Estimated noise=533.005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259588 Jy ! Component: 100 - total flux cleaned = 0.000394448 Jy ! Component: 150 - total flux cleaned = 0.000523414 Jy ! Component: 200 - total flux cleaned = 0.000610638 Jy ! Total flux subtracted in 200 components = 0.000610638 Jy ! Clean residual min=-0.003558 max=0.004030 Jy/beam ! Clean residual mean=-0.000005 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.105243 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.105243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169453Jy sigma=0.000651 ! Fit after self-cal, rms=0.169533Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91438e-06 Jy ! Component: 100 - total flux cleaned = 6.34022e-05 Jy ! Component: 150 - total flux cleaned = 6.30524e-05 Jy ! Component: 200 - total flux cleaned = 6.37592e-05 Jy ! Total flux subtracted in 200 components = 6.37592e-05 Jy ! Clean residual min=-0.003573 max=0.004059 Jy/beam ! Clean residual mean=-0.000005 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.105307 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.105307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169516Jy sigma=0.000651 ! Fit after self-cal, rms=0.169515Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169515Jy sigma=0.000650 ! Fit after self-cal, rms=0.172176Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.418 mas, bmaj=10.2 mas, bpa=-88.35 degrees ! Estimated noise=603.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000697397 Jy ! Component: 100 - total flux cleaned = 0.000771418 Jy ! Component: 150 - total flux cleaned = 0.000836036 Jy ! Component: 200 - total flux cleaned = 0.000908974 Jy ! Total flux subtracted in 200 components = 0.000908974 Jy ! Clean residual min=-0.004322 max=0.005964 Jy/beam ! Clean residual mean=-0.000006 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.106216 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 51 components and 0.106216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172154Jy sigma=0.000650 ! Fit after self-cal, rms=0.172150Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.25624e-06 Jy ! Component: 100 - total flux cleaned = 5.55658e-05 Jy ! Component: 150 - total flux cleaned = 9.17826e-05 Jy ! Component: 200 - total flux cleaned = 9.22568e-05 Jy ! Total flux subtracted in 200 components = 9.22568e-05 Jy ! Clean residual min=-0.004335 max=0.005944 Jy/beam ! Clean residual mean=-0.000006 rms=0.001604 Jy/beam ! Combined flux in latest and established models = 0.106308 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 52 components and 0.106308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172140Jy sigma=0.000650 ! Fit after self-cal, rms=0.172129Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.257 mas, bmaj=6.433 mas, bpa=-34.55 degrees ! Estimated noise=538.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.257 x 6.433 at -34.55 degrees (North through East) ! Clean map min=-0.0034816 max=0.051977 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.519 mas, bmaj=4.872 mas, bpa=-30.03 degrees ! Estimated noise=1058.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363712 Jy ! Component: 100 - total flux cleaned = 0.05534 Jy ! Component: 150 - total flux cleaned = 0.0685252 Jy ! Component: 200 - total flux cleaned = 0.0778711 Jy ! Total flux subtracted in 200 components = 0.0778711 Jy ! Clean residual min=-0.004600 max=0.006852 Jy/beam ! Clean residual mean=-0.000016 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 0.0778711 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0778711 Jy ! Inverting map and beam ! Estimated beam: bmin=5.257 mas, bmaj=6.433 mas, bpa=-34.55 degrees ! Estimated noise=538.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128732 Jy ! Component: 100 - total flux cleaned = 0.0197299 Jy ! Component: 150 - total flux cleaned = 0.0234642 Jy ! Component: 200 - total flux cleaned = 0.0255109 Jy ! Total flux subtracted in 200 components = 0.0255109 Jy ! Clean residual min=-0.003566 max=0.003795 Jy/beam ! Clean residual mean=-0.000010 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.103382 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 56 components and 0.103382 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.418 mas, bmaj=10.2 mas, bpa=-88.35 degrees ! Estimated noise=603.042 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184968 Jy ! Component: 100 - total flux cleaned = 0.00232959 Jy ! Component: 150 - total flux cleaned = 0.00241499 Jy ! Component: 200 - total flux cleaned = 0.00247067 Jy ! Total flux subtracted in 200 components = 0.00247067 Jy ! Clean residual min=-0.004321 max=0.005828 Jy/beam ! Clean residual mean=-0.000007 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.105853 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.82623e-05 Jy ! Component: 100 - total flux cleaned = 9.15322e-05 Jy ! Component: 150 - total flux cleaned = 0.000129617 Jy ! Component: 200 - total flux cleaned = 0.000152534 Jy ! Total flux subtracted in 200 components = 0.000152534 Jy ! Clean residual min=-0.004354 max=0.005840 Jy/beam ! Clean residual mean=-0.000007 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.106005 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 63 components and 0.106005 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.257 mas, bmaj=6.433 mas, bpa=-34.55 degrees ! Estimated noise=538.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230326 Jy ! Component: 100 - total flux cleaned = -0.000304484 Jy ! Component: 150 - total flux cleaned = -0.000383968 Jy ! Component: 200 - total flux cleaned = -0.00039966 Jy ! Total flux subtracted in 200 components = -0.00039966 Jy ! Clean residual min=-0.003585 max=0.004021 Jy/beam ! Clean residual mean=-0.000006 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 0.105606 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.105606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172102Jy sigma=0.000651 ! Fit after self-cal, rms=0.172100Jy sigma=0.000650 wmodel J2120+4434_S_2017_09_26_pus_map.mod ! Writing 71 model components to file: J2120+4434_S_2017_09_26_pus_map.mod wobs J2120+4434_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2120+4434_S_2017_09_26_pus_uvs.fits wwins J2120+4434_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2120+4434_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178806 Jy ! Component: 100 - total flux cleaned = 0.00304871 Jy ! Component: 150 - total flux cleaned = 0.00428947 Jy ! Component: 200 - total flux cleaned = 0.00551371 Jy ! Component: 250 - total flux cleaned = 0.00667393 Jy ! Component: 300 - total flux cleaned = 0.00778097 Jy ! Component: 350 - total flux cleaned = 0.00884059 Jy ! Component: 400 - total flux cleaned = 0.00990336 Jy ! Component: 450 - total flux cleaned = 0.0108394 Jy ! Component: 500 - total flux cleaned = 0.0116569 Jy ! Component: 550 - total flux cleaned = 0.0123231 Jy ! Component: 600 - total flux cleaned = 0.0128494 Jy ! Component: 650 - total flux cleaned = 0.0132835 Jy ! Component: 700 - total flux cleaned = 0.0137062 Jy ! Component: 750 - total flux cleaned = 0.0141934 Jy ! Component: 800 - total flux cleaned = 0.014596 Jy ! Component: 850 - total flux cleaned = 0.0148823 Jy ! Component: 900 - total flux cleaned = 0.0151626 Jy ! Component: 950 - total flux cleaned = 0.0153692 Jy ! Component: 1000 - total flux cleaned = 0.0157742 Jy ! Component: 1050 - total flux cleaned = 0.0160721 Jy ! Component: 1100 - total flux cleaned = 0.016431 Jy ! Component: 1150 - total flux cleaned = 0.0167512 Jy ! Component: 1200 - total flux cleaned = 0.0170672 Jy ! Component: 1250 - total flux cleaned = 0.0173788 Jy ! Component: 1300 - total flux cleaned = 0.017625 Jy ! Component: 1350 - total flux cleaned = 0.017928 Jy ! Component: 1400 - total flux cleaned = 0.0182264 Jy ! Component: 1450 - total flux cleaned = 0.0184618 Jy ! Component: 1500 - total flux cleaned = 0.0186361 Jy ! Component: 1550 - total flux cleaned = 0.018751 Jy ! Component: 1600 - total flux cleaned = 0.019035 Jy ! Component: 1650 - total flux cleaned = 0.0192031 Jy ! Component: 1700 - total flux cleaned = 0.0193692 Jy ! Component: 1750 - total flux cleaned = 0.0195061 Jy ! Component: 1800 - total flux cleaned = 0.0196953 Jy ! Component: 1850 - total flux cleaned = 0.0198022 Jy ! Component: 1900 - total flux cleaned = 0.0199078 Jy ! Component: 1950 - total flux cleaned = 0.0200643 Jy ! Component: 2000 - total flux cleaned = 0.020116 Jy ! Component: 2050 - total flux cleaned = 0.0203456 Jy ! Component: 2100 - total flux cleaned = 0.0203957 Jy ! Component: 2150 - total flux cleaned = 0.0204957 Jy ! Component: 2200 - total flux cleaned = 0.0205699 Jy ! Component: 2250 - total flux cleaned = 0.0207165 Jy ! Component: 2300 - total flux cleaned = 0.0208373 Jy ! Component: 2350 - total flux cleaned = 0.0208846 Jy ! Component: 2400 - total flux cleaned = 0.0209321 Jy ! Component: 2450 - total flux cleaned = 0.0210256 Jy ! Component: 2500 - total flux cleaned = 0.021072 Jy ! Component: 2550 - total flux cleaned = 0.0211178 Jy ! Component: 2600 - total flux cleaned = 0.0212543 Jy ! Component: 2650 - total flux cleaned = 0.021367 Jy ! Component: 2700 - total flux cleaned = 0.0214561 Jy ! Component: 2750 - total flux cleaned = 0.0215004 Jy ! Component: 2800 - total flux cleaned = 0.0216538 Jy ! Component: 2850 - total flux cleaned = 0.0216757 Jy ! Component: 2900 - total flux cleaned = 0.0217191 Jy ! Component: 2950 - total flux cleaned = 0.0217406 Jy ! Component: 3000 - total flux cleaned = 0.0218464 Jy ! Component: 3050 - total flux cleaned = 0.0218883 Jy ! Component: 3100 - total flux cleaned = 0.0218885 Jy ! Component: 3150 - total flux cleaned = 0.0219921 Jy ! Component: 3200 - total flux cleaned = 0.022074 Jy ! Component: 3250 - total flux cleaned = 0.0220739 Jy ! Component: 3300 - total flux cleaned = 0.0221341 Jy ! Component: 3350 - total flux cleaned = 0.0221339 Jy ! Component: 3400 - total flux cleaned = 0.0221738 Jy ! Component: 3450 - total flux cleaned = 0.0222726 Jy ! Component: 3500 - total flux cleaned = 0.0223314 Jy ! Component: 3550 - total flux cleaned = 0.0223118 Jy ! Component: 3600 - total flux cleaned = 0.0223505 Jy ! Component: 3650 - total flux cleaned = 0.0223313 Jy ! Component: 3700 - total flux cleaned = 0.0223697 Jy ! Component: 3750 - total flux cleaned = 0.0223886 Jy ! Component: 3800 - total flux cleaned = 0.0223508 Jy ! Component: 3850 - total flux cleaned = 0.0223319 Jy ! Component: 3900 - total flux cleaned = 0.0223319 Jy ! Component: 3950 - total flux cleaned = 0.0222209 Jy ! Component: 4000 - total flux cleaned = 0.0222209 Jy ! Component: 4050 - total flux cleaned = 0.0221843 Jy ! Total flux subtracted in 4096 components = 0.0221479 Jy ! Clean residual min=-0.001029 max=0.001065 Jy/beam ! Clean residual mean=-0.000007 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.127753 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 369 components and 0.127754 Jy ![Exited script file: muppet] wmap "J2120+4434_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.257 x 6.433 at -34.55 degrees (North through East) ! Clean map min=-0.0022334 max=0.052807 Jy/beam ! Writing clean map to FITS file: J2120+4434_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.052807 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00039509 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.24453 2.24453 4.48907 8.97814 17.9563 35.9126 71.8251 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.257 x 6.433 at -34.55 degrees (North through East) ! Clean map min=-0.0022334 max=0.052807 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2120+4434_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:06:54 2019