! Started logfile: J2120+0246_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:39 2019 obs J2120+0246_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2120+0246_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.75364 visibilities/baseline/integration-bin. ! Found source: J2120+0246 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15736 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2120+0246_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 349 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 349 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 824 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994934Jy sigma=0.010014 ! Fit after self-cal, rms=0.956419Jy sigma=0.009650 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=16.19 mas, bpa=-19.45 degrees ! Estimated noise=1188.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326086 Jy ! Component: 100 - total flux cleaned = 0.0407587 Jy ! Total flux subtracted in 100 components = 0.0407587 Jy ! Clean residual min=-0.003793 max=0.004806 Jy/beam ! Clean residual mean=-0.000015 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.0407587 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0407587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076823Jy sigma=0.000687 ! Fit after self-cal, rms=0.075849Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.109 mas, bmaj=17.85 mas, bpa=-18.51 degrees ! Estimated noise=708.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664938 Jy ! Component: 100 - total flux cleaned = 0.00923928 Jy ! Component: 150 - total flux cleaned = 0.0106357 Jy ! Component: 200 - total flux cleaned = 0.0114025 Jy ! Total flux subtracted in 200 components = 0.0114025 Jy ! Clean residual min=-0.003893 max=0.003248 Jy/beam ! Clean residual mean=-0.000017 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.0521612 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.0521612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075206Jy sigma=0.000673 ! Fit after self-cal, rms=0.075165Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.08 HN 1.03 KP 1.27 ! LA 1.07 MK 1.06 NL 0.99 OV 1.06 ! PT 0.82 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.02 KP 1.13 ! LA 1.01 MK 1.15 NL 1.02 OV 1.04 ! PT 0.84 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.94 KP 1.09 ! LA 0.83 MK 1.27 NL 1.13 OV 1.01 ! PT 0.88 ! ! ! Correcting IF 4. ! A total of 111 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.74 KP 1.00* ! LA 0.81 MK 0.86 NL 1.00* OV 1.00* ! PT 0.69 ! ! ! Fit before self-cal, rms=0.075165Jy sigma=0.000673 ! Fit after self-cal, rms=0.071619Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.165 mas, bmaj=17.39 mas, bpa=-18.33 degrees ! Estimated noise=712.252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504444 Jy ! Component: 100 - total flux cleaned = -0.000611415 Jy ! Component: 150 - total flux cleaned = -0.000656574 Jy ! Component: 200 - total flux cleaned = -0.000698664 Jy ! Total flux subtracted in 200 components = -0.000698664 Jy ! Clean residual min=-0.002228 max=0.001862 Jy/beam ! Clean residual mean=-0.000002 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0514625 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.0514625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071601Jy sigma=0.000667 ! Fit after self-cal, rms=0.071719Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071719Jy sigma=0.000666 ! Fit after self-cal, rms=0.072458Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.191 mas, bmaj=17.35 mas, bpa=-18.42 degrees ! Estimated noise=712.244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00042818 Jy ! Component: 100 - total flux cleaned = -0.000513038 Jy ! Component: 150 - total flux cleaned = -0.000471446 Jy ! Component: 200 - total flux cleaned = -0.000434895 Jy ! Total flux subtracted in 200 components = -0.000434895 Jy ! Clean residual min=-0.001931 max=0.002150 Jy/beam ! Clean residual mean=-0.000007 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.0510276 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.0510276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072435Jy sigma=0.000663 ! Fit after self-cal, rms=0.072725Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300028 Jy ! Component: 100 - total flux cleaned = 0.000319443 Jy ! Component: 150 - total flux cleaned = 0.000318956 Jy ! Component: 200 - total flux cleaned = 0.000335828 Jy ! Total flux subtracted in 200 components = 0.000335828 Jy ! Clean residual min=-0.002080 max=0.002030 Jy/beam ! Clean residual mean=-0.000009 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0513635 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 0.0513635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072708Jy sigma=0.000663 ! Fit after self-cal, rms=0.072722Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072722Jy sigma=0.000663 ! Fit after self-cal, rms=0.073890Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.189 mas, bmaj=17.35 mas, bpa=-18.47 degrees ! Estimated noise=712.573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408254 Jy ! Component: 100 - total flux cleaned = -0.000433586 Jy ! Component: 150 - total flux cleaned = -0.000452549 Jy ! Component: 200 - total flux cleaned = -0.000470134 Jy ! Total flux subtracted in 200 components = -0.000470134 Jy ! Clean residual min=-0.001880 max=0.002126 Jy/beam ! Clean residual mean=-0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0508933 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.0508933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073870Jy sigma=0.000662 ! Fit after self-cal, rms=0.074028Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.5, -118.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107497 Jy ! Component: 100 - total flux cleaned = 0.000995586 Jy ! Component: 150 - total flux cleaned = 0.000921367 Jy ! Component: 200 - total flux cleaned = 0.000950468 Jy ! Total flux subtracted in 200 components = 0.000950468 Jy ! Clean residual min=-0.001806 max=0.001274 Jy/beam ! Clean residual mean=-0.000008 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0518438 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.0518438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073967Jy sigma=0.000662 ! Fit after self-cal, rms=0.073958Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073958Jy sigma=0.000661 ! Fit after self-cal, rms=0.074347Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.362 mas, bmaj=17.79 mas, bpa=-14.64 degrees ! Estimated noise=796.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135271 Jy ! Component: 100 - total flux cleaned = 0.00132709 Jy ! Component: 150 - total flux cleaned = 0.00123579 Jy ! Component: 200 - total flux cleaned = 0.00109936 Jy ! Total flux subtracted in 200 components = 0.00109936 Jy ! Clean residual min=-0.001604 max=0.001286 Jy/beam ! Clean residual mean=-0.000009 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0529432 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.0529432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074313Jy sigma=0.000661 ! Fit after self-cal, rms=0.074404Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000700819 Jy ! Component: 100 - total flux cleaned = 0.000661059 Jy ! Component: 150 - total flux cleaned = 0.000531872 Jy ! Component: 200 - total flux cleaned = 0.000450121 Jy ! Total flux subtracted in 200 components = 0.000450121 Jy ! Clean residual min=-0.001688 max=0.001289 Jy/beam ! Clean residual mean=-0.000011 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0533933 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 149 components and 0.0533933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074385Jy sigma=0.000661 ! Fit after self-cal, rms=0.074388Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=17.36 mas, bpa=-18.52 degrees ! Estimated noise=709.599 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 17.36 at -18.52 degrees (North through East) ! Clean map min=-0.0022971 max=0.045442 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=15.14 mas, bpa=-19.33 degrees ! Estimated noise=1289.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345913 Jy ! Component: 100 - total flux cleaned = 0.0430962 Jy ! Component: 150 - total flux cleaned = 0.048011 Jy ! Component: 200 - total flux cleaned = 0.0511038 Jy ! Total flux subtracted in 200 components = 0.0511038 Jy ! Clean residual min=-0.003566 max=0.002808 Jy/beam ! Clean residual mean=-0.000012 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0511038 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0511038 Jy ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=17.36 mas, bpa=-18.52 degrees ! Estimated noise=709.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158141 Jy ! Component: 100 - total flux cleaned = 0.00207815 Jy ! Component: 150 - total flux cleaned = 0.00208204 Jy ! Component: 200 - total flux cleaned = 0.00220382 Jy ! Total flux subtracted in 200 components = 0.00220382 Jy ! Clean residual min=-0.002148 max=0.001734 Jy/beam ! Clean residual mean=-0.000007 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0533076 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.0533076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.362 mas, bmaj=17.79 mas, bpa=-14.64 degrees ! Estimated noise=796.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000901187 Jy ! Component: 100 - total flux cleaned = 0.00101368 Jy ! Component: 150 - total flux cleaned = 0.000981136 Jy ! Component: 200 - total flux cleaned = 0.000890689 Jy ! Total flux subtracted in 200 components = 0.000890689 Jy ! Clean residual min=-0.001926 max=0.001298 Jy/beam ! Clean residual mean=-0.000011 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0541983 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.23263e-05 Jy ! Component: 100 - total flux cleaned = -0.000158262 Jy ! Component: 150 - total flux cleaned = -0.000204948 Jy ! Component: 200 - total flux cleaned = -0.000249251 Jy ! Total flux subtracted in 200 components = -0.000249251 Jy ! Clean residual min=-0.001808 max=0.001261 Jy/beam ! Clean residual mean=-0.000011 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.053949 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 104 components and 0.053949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=17.36 mas, bpa=-18.52 degrees ! Estimated noise=709.599 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312657 Jy ! Component: 100 - total flux cleaned = -0.000620927 Jy ! Component: 150 - total flux cleaned = -0.000688177 Jy ! Component: 200 - total flux cleaned = -0.00068847 Jy ! Total flux subtracted in 200 components = -0.00068847 Jy ! Clean residual min=-0.001723 max=0.001365 Jy/beam ! Clean residual mean=-0.000006 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0532606 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 123 components and 0.0532606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074394Jy sigma=0.000661 ! Fit after self-cal, rms=0.074400Jy sigma=0.000661 wmodel J2120+0246_S_2017_10_21_pus_map.mod ! Writing 123 model components to file: J2120+0246_S_2017_10_21_pus_map.mod wobs J2120+0246_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2120+0246_S_2017_10_21_pus_uvs.fits wwins J2120+0246_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J2120+0246_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783942 Jy ! Component: 100 - total flux cleaned = -0.00134539 Jy ! Component: 150 - total flux cleaned = -0.00183484 Jy ! Component: 200 - total flux cleaned = -0.00229357 Jy ! Component: 250 - total flux cleaned = -0.00266056 Jy ! Component: 300 - total flux cleaned = -0.0029249 Jy ! Component: 350 - total flux cleaned = -0.00317912 Jy ! Component: 400 - total flux cleaned = -0.00344377 Jy ! Component: 450 - total flux cleaned = -0.0036406 Jy ! Component: 500 - total flux cleaned = -0.00379235 Jy ! Component: 550 - total flux cleaned = -0.00392124 Jy ! Component: 600 - total flux cleaned = -0.00402866 Jy ! Component: 650 - total flux cleaned = -0.00415096 Jy ! Component: 700 - total flux cleaned = -0.00430425 Jy ! Component: 750 - total flux cleaned = -0.00440409 Jy ! Component: 800 - total flux cleaned = -0.00450166 Jy ! Component: 850 - total flux cleaned = -0.0045336 Jy ! Component: 900 - total flux cleaned = -0.00462733 Jy ! Component: 950 - total flux cleaned = -0.00468835 Jy ! Component: 1000 - total flux cleaned = -0.00473294 Jy ! Component: 1050 - total flux cleaned = -0.00479172 Jy ! Component: 1100 - total flux cleaned = -0.00483511 Jy ! Component: 1150 - total flux cleaned = -0.00487771 Jy ! Component: 1200 - total flux cleaned = -0.00490543 Jy ! Component: 1250 - total flux cleaned = -0.00491909 Jy ! Component: 1300 - total flux cleaned = -0.00493262 Jy ! Component: 1350 - total flux cleaned = -0.00494614 Jy ! Component: 1400 - total flux cleaned = -0.0049856 Jy ! Component: 1450 - total flux cleaned = -0.00502445 Jy ! Component: 1500 - total flux cleaned = -0.00502428 Jy ! Component: 1550 - total flux cleaned = -0.00501161 Jy ! Component: 1600 - total flux cleaned = -0.00499923 Jy ! Component: 1650 - total flux cleaned = -0.00502399 Jy ! Component: 1700 - total flux cleaned = -0.0050484 Jy ! Component: 1750 - total flux cleaned = -0.00507251 Jy ! Component: 1800 - total flux cleaned = -0.00512013 Jy ! Component: 1850 - total flux cleaned = -0.00519052 Jy ! Component: 1900 - total flux cleaned = -0.00522497 Jy ! Component: 1950 - total flux cleaned = -0.00525908 Jy ! Component: 2000 - total flux cleaned = -0.00527036 Jy ! Component: 2050 - total flux cleaned = -0.00527016 Jy ! Component: 2100 - total flux cleaned = -0.00523688 Jy ! Component: 2150 - total flux cleaned = -0.00521492 Jy ! Component: 2200 - total flux cleaned = -0.0052476 Jy ! Component: 2250 - total flux cleaned = -0.00522613 Jy ! Component: 2300 - total flux cleaned = -0.00517282 Jy ! Component: 2350 - total flux cleaned = -0.00513065 Jy ! Component: 2400 - total flux cleaned = -0.00513074 Jy ! Component: 2450 - total flux cleaned = -0.00511002 Jy ! Component: 2500 - total flux cleaned = -0.0051099 Jy ! Component: 2550 - total flux cleaned = -0.00510975 Jy ! Component: 2600 - total flux cleaned = -0.0050793 Jy ! Component: 2650 - total flux cleaned = -0.00506933 Jy ! Component: 2700 - total flux cleaned = -0.00507938 Jy ! Component: 2750 - total flux cleaned = -0.00511911 Jy ! Component: 2800 - total flux cleaned = -0.00517795 Jy ! Component: 2850 - total flux cleaned = -0.00516823 Jy ! Component: 2900 - total flux cleaned = -0.00518765 Jy ! Component: 2950 - total flux cleaned = -0.00520683 Jy ! Component: 3000 - total flux cleaned = -0.00522592 Jy ! Component: 3050 - total flux cleaned = -0.00523548 Jy ! Component: 3100 - total flux cleaned = -0.00530132 Jy ! Component: 3150 - total flux cleaned = -0.00531055 Jy ! Component: 3200 - total flux cleaned = -0.00531049 Jy ! Component: 3250 - total flux cleaned = -0.00532893 Jy ! Component: 3300 - total flux cleaned = -0.0053197 Jy ! Component: 3350 - total flux cleaned = -0.00532882 Jy ! Component: 3400 - total flux cleaned = -0.0053198 Jy ! Component: 3450 - total flux cleaned = -0.00533787 Jy ! Component: 3500 - total flux cleaned = -0.00534679 Jy ! Component: 3550 - total flux cleaned = -0.0053646 Jy ! Component: 3600 - total flux cleaned = -0.0053735 Jy ! Component: 3650 - total flux cleaned = -0.00542658 Jy ! Component: 3700 - total flux cleaned = -0.00542663 Jy ! Component: 3750 - total flux cleaned = -0.00545296 Jy ! Component: 3800 - total flux cleaned = -0.00545303 Jy ! Component: 3850 - total flux cleaned = -0.00550526 Jy ! Component: 3900 - total flux cleaned = -0.00550528 Jy ! Component: 3950 - total flux cleaned = -0.00553985 Jy ! Component: 4000 - total flux cleaned = -0.00555711 Jy ! Component: 4050 - total flux cleaned = -0.00557421 Jy ! Total flux subtracted in 4096 components = -0.00557422 Jy ! Clean residual min=-0.000482 max=0.000459 Jy/beam ! Clean residual mean=-0.000003 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0476863 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 390 components and 0.0476863 Jy ![Exited script file: muppet] wmap "J2120+0246_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 17.36 at -18.52 degrees (North through East) ! Clean map min=-0.0020689 max=0.045243 Jy/beam ! Writing clean map to FITS file: J2120+0246_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0452429 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.09646 1.09646 2.19291 4.38583 8.77165 17.5433 35.0866 70.1732 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 17.36 at -18.52 degrees (North through East) ! Clean map min=-0.0020689 max=0.045243 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2120+0246_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:44 2019