! Started logfile: J2119-2340_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:34 2019 obs J2119-2340_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2119-2340_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.924155 visibilities/baseline/integration-bin. ! Found source: J2119-2340 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2119-2340_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 476 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900504Jy sigma=0.007096 ! Fit after self-cal, rms=0.879076Jy sigma=0.006920 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=14.36 mas, bpa=-18.62 degrees ! Estimated noise=1261.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955688 Jy ! Component: 100 - total flux cleaned = 0.119568 Jy ! Total flux subtracted in 100 components = 0.119568 Jy ! Clean residual min=-0.006368 max=0.011712 Jy/beam ! Clean residual mean=-0.000053 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.119568 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.119568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105628Jy sigma=0.000743 ! Fit after self-cal, rms=0.105641Jy sigma=0.000742 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=16.24 mas, bpa=-17.76 degrees ! Estimated noise=830.612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159274 Jy ! Component: 100 - total flux cleaned = 0.0248436 Jy ! Component: 150 - total flux cleaned = 0.0304375 Jy ! Component: 200 - total flux cleaned = 0.0341244 Jy ! Total flux subtracted in 200 components = 0.0341244 Jy ! Clean residual min=-0.004339 max=0.006374 Jy/beam ! Clean residual mean=-0.000054 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.153692 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.153692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103223Jy sigma=0.000720 ! Fit after self-cal, rms=0.103284Jy sigma=0.000720 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 0.97 HN 0.96 KP 1.09 ! LA 0.98 MK 0.95 NL 0.87 OV 0.94 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 0.95 HN 1.07 KP 1.03 ! LA 0.95 MK 0.98 NL 1.06 OV 0.95 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.72 FD 1.04 HN 1.07 KP 1.06 ! LA 0.76 MK 1.00 NL 1.21 OV 0.88 ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.99 KP 1.00* ! LA 1.07 MK 1.18 NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.103284Jy sigma=0.000720 ! Fit after self-cal, rms=0.114247Jy sigma=0.000704 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=16.98 mas, bpa=-17.91 degrees ! Estimated noise=843.017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000810986 Jy ! Component: 100 - total flux cleaned = -0.00102731 Jy ! Component: 150 - total flux cleaned = -0.00122467 Jy ! Component: 200 - total flux cleaned = -0.00136211 Jy ! Total flux subtracted in 200 components = -0.00136211 Jy ! Clean residual min=-0.003033 max=0.003338 Jy/beam ! Clean residual mean=0.000000 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.15233 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.15233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114187Jy sigma=0.000704 ! Fit after self-cal, rms=0.114408Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114408Jy sigma=0.000703 ! Fit after self-cal, rms=0.117638Jy sigma=0.000701 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=17 mas, bpa=-17.92 degrees ! Estimated noise=843.755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209767 Jy ! Component: 100 - total flux cleaned = -0.000339064 Jy ! Component: 150 - total flux cleaned = -0.000461503 Jy ! Component: 200 - total flux cleaned = -0.000539269 Jy ! Total flux subtracted in 200 components = -0.000539269 Jy ! Clean residual min=-0.002672 max=0.002417 Jy/beam ! Clean residual mean=-0.000006 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.151791 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.151791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117604Jy sigma=0.000701 ! Fit after self-cal, rms=0.117635Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.41867e-05 Jy ! Component: 100 - total flux cleaned = -0.000182172 Jy ! Component: 150 - total flux cleaned = -0.000250285 Jy ! Component: 200 - total flux cleaned = -0.000316641 Jy ! Total flux subtracted in 200 components = -0.000316641 Jy ! Clean residual min=-0.002687 max=0.002398 Jy/beam ! Clean residual mean=-0.000006 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.151474 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 70 components and 0.151474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117613Jy sigma=0.000701 ! Fit after self-cal, rms=0.117614Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117614Jy sigma=0.000701 ! Fit after self-cal, rms=0.119710Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=16.97 mas, bpa=-17.93 degrees ! Estimated noise=841.252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000521577 Jy ! Component: 100 - total flux cleaned = -0.0006076 Jy ! Component: 150 - total flux cleaned = -0.000660385 Jy ! Component: 200 - total flux cleaned = -0.000710637 Jy ! Total flux subtracted in 200 components = -0.000710637 Jy ! Clean residual min=-0.002440 max=0.002268 Jy/beam ! Clean residual mean=-0.000008 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.150764 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 0.150764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119695Jy sigma=0.000700 ! Fit after self-cal, rms=0.119699Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.17064e-05 Jy ! Component: 100 - total flux cleaned = -0.000106981 Jy ! Component: 150 - total flux cleaned = -0.000153238 Jy ! Component: 200 - total flux cleaned = -0.000196791 Jy ! Total flux subtracted in 200 components = -0.000196791 Jy ! Clean residual min=-0.002447 max=0.002251 Jy/beam ! Clean residual mean=-0.000008 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.150567 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.150567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119689Jy sigma=0.000700 ! Fit after self-cal, rms=0.119690Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119690Jy sigma=0.000700 ! Fit after self-cal, rms=0.120257Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.067 mas, bmaj=25.91 mas, bpa=-5.938 degrees ! Estimated noise=989.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636048 Jy ! Component: 100 - total flux cleaned = -0.000689211 Jy ! Component: 150 - total flux cleaned = -0.000739363 Jy ! Component: 200 - total flux cleaned = -0.000807816 Jy ! Total flux subtracted in 200 components = -0.000807816 Jy ! Clean residual min=-0.002942 max=0.002231 Jy/beam ! Clean residual mean=-0.000015 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.149759 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.149759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120251Jy sigma=0.000700 ! Fit after self-cal, rms=0.120255Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36971e-05 Jy ! Component: 100 - total flux cleaned = -9.54332e-05 Jy ! Component: 150 - total flux cleaned = -0.000133567 Jy ! Component: 200 - total flux cleaned = -0.000168937 Jy ! Total flux subtracted in 200 components = -0.000168937 Jy ! Clean residual min=-0.002937 max=0.002234 Jy/beam ! Clean residual mean=-0.000016 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.14959 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.14959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120253Jy sigma=0.000700 ! Fit after self-cal, rms=0.120253Jy sigma=0.000700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.99 mas, bpa=-17.94 degrees ! Estimated noise=840.191 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.99 at -17.94 degrees (North through East) ! Clean map min=-0.0022727 max=0.12826 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.608 mas, bmaj=15.05 mas, bpa=-18.67 degrees ! Estimated noise=1311.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989773 Jy ! Component: 100 - total flux cleaned = 0.121866 Jy ! Component: 150 - total flux cleaned = 0.13144 Jy ! Component: 200 - total flux cleaned = 0.137404 Jy ! Total flux subtracted in 200 components = 0.137404 Jy ! Clean residual min=-0.004350 max=0.003713 Jy/beam ! Clean residual mean=-0.000015 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.137404 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.137404 Jy ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.99 mas, bpa=-17.94 degrees ! Estimated noise=840.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536033 Jy ! Component: 100 - total flux cleaned = 0.00808422 Jy ! Component: 150 - total flux cleaned = 0.00965045 Jy ! Component: 200 - total flux cleaned = 0.0106037 Jy ! Total flux subtracted in 200 components = 0.0106037 Jy ! Clean residual min=-0.002381 max=0.002188 Jy/beam ! Clean residual mean=-0.000011 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.148008 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.148008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.067 mas, bmaj=25.91 mas, bpa=-5.938 degrees ! Estimated noise=989.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860754 Jy ! Component: 100 - total flux cleaned = 0.000997799 Jy ! Component: 150 - total flux cleaned = 0.00103017 Jy ! Component: 200 - total flux cleaned = 0.00105848 Jy ! Total flux subtracted in 200 components = 0.00105848 Jy ! Clean residual min=-0.003026 max=0.002258 Jy/beam ! Clean residual mean=-0.000017 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.149066 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88285e-05 Jy ! Component: 100 - total flux cleaned = 7.52996e-05 Jy ! Component: 150 - total flux cleaned = 0.000109657 Jy ! Component: 200 - total flux cleaned = 0.000141776 Jy ! Total flux subtracted in 200 components = 0.000141776 Jy ! Clean residual min=-0.002999 max=0.002272 Jy/beam ! Clean residual mean=-0.000016 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.149208 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.149208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.99 mas, bpa=-17.94 degrees ! Estimated noise=840.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003487 Jy ! Component: 100 - total flux cleaned = -0.000349292 Jy ! Component: 150 - total flux cleaned = -0.000307122 Jy ! Component: 200 - total flux cleaned = -0.000287004 Jy ! Total flux subtracted in 200 components = -0.000287004 Jy ! Clean residual min=-0.002341 max=0.002243 Jy/beam ! Clean residual mean=-0.000009 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.148921 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.148921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120272Jy sigma=0.000700 ! Fit after self-cal, rms=0.120230Jy sigma=0.000700 wmodel J2119-2340_S_2017_10_21_pus_map.mod ! Writing 94 model components to file: J2119-2340_S_2017_10_21_pus_map.mod wobs J2119-2340_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2119-2340_S_2017_10_21_pus_uvs.fits wwins J2119-2340_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2119-2340_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026518 Jy ! Component: 100 - total flux cleaned = -0.000264905 Jy ! Component: 150 - total flux cleaned = -0.000298479 Jy ! Component: 200 - total flux cleaned = -0.000331784 Jy ! Component: 250 - total flux cleaned = -0.00036398 Jy ! Component: 300 - total flux cleaned = -0.000333244 Jy ! Component: 350 - total flux cleaned = -0.000334076 Jy ! Component: 400 - total flux cleaned = -0.000305413 Jy ! Component: 450 - total flux cleaned = -0.000221206 Jy ! Component: 500 - total flux cleaned = -0.000276165 Jy ! Component: 550 - total flux cleaned = -0.000248571 Jy ! Component: 600 - total flux cleaned = -0.000143763 Jy ! Component: 650 - total flux cleaned = -0.000196059 Jy ! Component: 700 - total flux cleaned = -0.000347603 Jy ! Component: 750 - total flux cleaned = -0.000297975 Jy ! Component: 800 - total flux cleaned = -0.000395483 Jy ! Component: 850 - total flux cleaned = -0.000324002 Jy ! Component: 900 - total flux cleaned = -0.00034798 Jy ! Component: 950 - total flux cleaned = -0.000394488 Jy ! Component: 1000 - total flux cleaned = -0.000484891 Jy ! Component: 1050 - total flux cleaned = -0.000529222 Jy ! Component: 1100 - total flux cleaned = -0.000463148 Jy ! Component: 1150 - total flux cleaned = -0.000549333 Jy ! Component: 1200 - total flux cleaned = -0.000505921 Jy ! Component: 1250 - total flux cleaned = -0.000485147 Jy ! Component: 1300 - total flux cleaned = -0.00052666 Jy ! Component: 1350 - total flux cleaned = -0.000628385 Jy ! Component: 1400 - total flux cleaned = -0.000628213 Jy ! Component: 1450 - total flux cleaned = -0.000707587 Jy ! Component: 1500 - total flux cleaned = -0.000727175 Jy ! Component: 1550 - total flux cleaned = -0.0008241 Jy ! Component: 1600 - total flux cleaned = -0.000843092 Jy ! Component: 1650 - total flux cleaned = -0.000862242 Jy ! Component: 1700 - total flux cleaned = -0.000956047 Jy ! Component: 1750 - total flux cleaned = -0.000974384 Jy ! Component: 1800 - total flux cleaned = -0.000992655 Jy ! Component: 1850 - total flux cleaned = -0.00108291 Jy ! Component: 1900 - total flux cleaned = -0.00104702 Jy ! Component: 1950 - total flux cleaned = -0.00115321 Jy ! Component: 2000 - total flux cleaned = -0.00120576 Jy ! Component: 2050 - total flux cleaned = -0.00118835 Jy ! Component: 2100 - total flux cleaned = -0.00132523 Jy ! Component: 2150 - total flux cleaned = -0.00132505 Jy ! Component: 2200 - total flux cleaned = -0.00130831 Jy ! Component: 2250 - total flux cleaned = -0.00134149 Jy ! Component: 2300 - total flux cleaned = -0.00139084 Jy ! Component: 2350 - total flux cleaned = -0.00142353 Jy ! Component: 2400 - total flux cleaned = -0.00143977 Jy ! Component: 2450 - total flux cleaned = -0.00145557 Jy ! Component: 2500 - total flux cleaned = -0.00145556 Jy ! Component: 2550 - total flux cleaned = -0.00147126 Jy ! Component: 2600 - total flux cleaned = -0.0015334 Jy ! Component: 2650 - total flux cleaned = -0.00148707 Jy ! Component: 2700 - total flux cleaned = -0.00145664 Jy ! Component: 2750 - total flux cleaned = -0.00145659 Jy ! Component: 2800 - total flux cleaned = -0.00144161 Jy ! Component: 2850 - total flux cleaned = -0.00142675 Jy ! Component: 2900 - total flux cleaned = -0.00139703 Jy ! Component: 2950 - total flux cleaned = -0.00136778 Jy ! Component: 3000 - total flux cleaned = -0.00132414 Jy ! Component: 3050 - total flux cleaned = -0.00128094 Jy ! Component: 3100 - total flux cleaned = -0.00123803 Jy ! Component: 3150 - total flux cleaned = -0.00125211 Jy ! Component: 3200 - total flux cleaned = -0.00118145 Jy ! Component: 3250 - total flux cleaned = -0.00113924 Jy ! Component: 3300 - total flux cleaned = -0.00108337 Jy ! Component: 3350 - total flux cleaned = -0.00100023 Jy ! Component: 3400 - total flux cleaned = -0.000959058 Jy ! Component: 3450 - total flux cleaned = -0.000945429 Jy ! Component: 3500 - total flux cleaned = -0.000850323 Jy ! Component: 3550 - total flux cleaned = -0.000796359 Jy ! Component: 3600 - total flux cleaned = -0.000742717 Jy ! Component: 3650 - total flux cleaned = -0.000676097 Jy ! Component: 3700 - total flux cleaned = -0.000636339 Jy ! Component: 3750 - total flux cleaned = -0.000570474 Jy ! Component: 3800 - total flux cleaned = -0.000505006 Jy ! Component: 3850 - total flux cleaned = -0.000491951 Jy ! Component: 3900 - total flux cleaned = -0.000414152 Jy ! Component: 3950 - total flux cleaned = -0.000375394 Jy ! Component: 4000 - total flux cleaned = -0.000285751 Jy ! Component: 4050 - total flux cleaned = -0.000234826 Jy ! Total flux subtracted in 4096 components = -0.000209444 Jy ! Clean residual min=-0.000660 max=0.000707 Jy/beam ! Clean residual mean=0.000005 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.148712 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 387 components and 0.148712 Jy ![Exited script file: muppet] wmap "J2119-2340_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.99 at -17.94 degrees (North through East) ! Clean map min=-0.0017699 max=0.12938 Jy/beam ! Writing clean map to FITS file: J2119-2340_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.129382 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249641 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578847 0.578847 1.15769 2.31539 4.63077 9.26155 18.5231 37.0462 74.0924 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.129 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.99 at -17.94 degrees (North through East) ! Clean map min=-0.0017699 max=0.12938 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2119-2340_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:39 2019