! Started logfile: J2116+0225_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:29 2019 obs J2116+0225_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2116+0225_S_2017_10_21_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.765721 visibilities/baseline/integration-bin. ! Found source: J2116+0225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 25912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2116+0225_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 273 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 554 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 524 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1316 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983360Jy sigma=0.009755 ! Fit after self-cal, rms=0.955447Jy sigma=0.009489 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=15.05 mas, bpa=-19.75 degrees ! Estimated noise=1007.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0338336 Jy ! Component: 100 - total flux cleaned = 0.0441611 Jy ! Total flux subtracted in 100 components = 0.0441611 Jy ! Clean residual min=-0.004145 max=0.004527 Jy/beam ! Clean residual mean=-0.000012 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.0441611 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0441611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078434Jy sigma=0.000696 ! Fit after self-cal, rms=0.077515Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=17.51 mas, bpa=-18.87 degrees ! Estimated noise=559.464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841085 Jy ! Component: 100 - total flux cleaned = 0.0130118 Jy ! Component: 150 - total flux cleaned = 0.0161263 Jy ! Component: 200 - total flux cleaned = 0.0183738 Jy ! Total flux subtracted in 200 components = 0.0183738 Jy ! Clean residual min=-0.004164 max=0.003722 Jy/beam ! Clean residual mean=-0.000013 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0625349 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 115 components and 0.0625349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076479Jy sigma=0.000677 ! Fit after self-cal, rms=0.076371Jy sigma=0.000676 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 1.00 KP 1.12 ! LA 1.05 MK 1.01 NL 1.00 OV 1.18 ! PT 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.08 KP 1.10 ! LA 0.96 MK 1.06 NL 1.13 OV 1.15 ! PT 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.05 HN 1.02 KP 0.99 ! LA 0.83 MK 1.10 NL 1.26 OV 1.04 ! PT 0.79 ! ! ! Correcting IF 4. ! A total of 375 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 0.64 KP 1.00* ! LA 0.74 MK 1.00* NL 1.00* OV 1.00* ! PT 0.69 ! ! ! Fit before self-cal, rms=0.076371Jy sigma=0.000676 ! Fit after self-cal, rms=0.074742Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.977 mas, bmaj=17.62 mas, bpa=-18.7 degrees ! Estimated noise=565.807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450683 Jy ! Component: 100 - total flux cleaned = 0.000536194 Jy ! Component: 150 - total flux cleaned = 0.000579774 Jy ! Component: 200 - total flux cleaned = 0.000596913 Jy ! Total flux subtracted in 200 components = 0.000596913 Jy ! Clean residual min=-0.001734 max=0.002215 Jy/beam ! Clean residual mean=0.000011 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0631318 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.0631318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074722Jy sigma=0.000669 ! Fit after self-cal, rms=0.075038Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075038Jy sigma=0.000668 ! Fit after self-cal, rms=0.076109Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.942 mas, bmaj=17.68 mas, bpa=-18.78 degrees ! Estimated noise=567.595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276274 Jy ! Component: 100 - total flux cleaned = 0.000352948 Jy ! Component: 150 - total flux cleaned = 0.000383652 Jy ! Component: 200 - total flux cleaned = 0.000397448 Jy ! Total flux subtracted in 200 components = 0.000397448 Jy ! Clean residual min=-0.001676 max=0.001860 Jy/beam ! Clean residual mean=0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0635293 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 135 components and 0.0635292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076098Jy sigma=0.000666 ! Fit after self-cal, rms=0.076386Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140593 Jy ! Component: 100 - total flux cleaned = 0.000140619 Jy ! Component: 150 - total flux cleaned = 0.000172053 Jy ! Component: 200 - total flux cleaned = 0.000186289 Jy ! Total flux subtracted in 200 components = 0.000186289 Jy ! Clean residual min=-0.001904 max=0.001696 Jy/beam ! Clean residual mean=-0.000000 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0637155 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 0.0637155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076377Jy sigma=0.000665 ! Fit after self-cal, rms=0.076382Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076382Jy sigma=0.000665 ! Fit after self-cal, rms=0.077228Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=17.69 mas, bpa=-18.83 degrees ! Estimated noise=566.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330071 Jy ! Component: 100 - total flux cleaned = 0.000365889 Jy ! Component: 150 - total flux cleaned = 0.000396001 Jy ! Component: 200 - total flux cleaned = 0.00039582 Jy ! Total flux subtracted in 200 components = 0.00039582 Jy ! Clean residual min=-0.001784 max=0.001822 Jy/beam ! Clean residual mean=0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0641114 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 152 components and 0.0641114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077218Jy sigma=0.000665 ! Fit after self-cal, rms=0.077382Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27329e-05 Jy ! Component: 100 - total flux cleaned = -2.16339e-05 Jy ! Component: 150 - total flux cleaned = -5.14207e-05 Jy ! Component: 200 - total flux cleaned = -5.12177e-05 Jy ! Total flux subtracted in 200 components = -5.12177e-05 Jy ! Clean residual min=-0.001850 max=0.001702 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0640602 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 154 components and 0.0640601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077375Jy sigma=0.000665 ! Fit after self-cal, rms=0.077376Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077376Jy sigma=0.000665 ! Fit after self-cal, rms=0.077834Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.683 mas, bmaj=17.95 mas, bpa=-15.41 degrees ! Estimated noise=663.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04952e-05 Jy ! Component: 100 - total flux cleaned = 9.19874e-05 Jy ! Component: 150 - total flux cleaned = 8.11e-05 Jy ! Component: 200 - total flux cleaned = 8.10606e-05 Jy ! Total flux subtracted in 200 components = 8.10606e-05 Jy ! Clean residual min=-0.001732 max=0.002011 Jy/beam ! Clean residual mean=0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0641412 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 157 components and 0.0641412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077828Jy sigma=0.000665 ! Fit after self-cal, rms=0.077907Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.12114e-05 Jy ! Component: 100 - total flux cleaned = -5.3972e-05 Jy ! Component: 150 - total flux cleaned = -6.32758e-05 Jy ! Component: 200 - total flux cleaned = -6.30284e-05 Jy ! Total flux subtracted in 200 components = -6.30284e-05 Jy ! Clean residual min=-0.001766 max=0.001908 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0640782 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 161 components and 0.0640782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077903Jy sigma=0.000665 ! Fit after self-cal, rms=0.077902Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=17.7 mas, bpa=-18.86 degrees ! Estimated noise=564.549 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 17.7 at -18.86 degrees (North through East) ! Clean map min=-0.0017594 max=0.04327 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=14.99 mas, bpa=-19.68 degrees ! Estimated noise=977.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331 Jy ! Component: 100 - total flux cleaned = 0.0447597 Jy ! Component: 150 - total flux cleaned = 0.0508856 Jy ! Component: 200 - total flux cleaned = 0.0550227 Jy ! Total flux subtracted in 200 components = 0.0550227 Jy ! Clean residual min=-0.003606 max=0.003050 Jy/beam ! Clean residual mean=-0.000004 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.0550227 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0550227 Jy ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=17.7 mas, bpa=-18.86 degrees ! Estimated noise=564.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411337 Jy ! Component: 100 - total flux cleaned = 0.00633537 Jy ! Component: 150 - total flux cleaned = 0.00768887 Jy ! Component: 200 - total flux cleaned = 0.0080038 Jy ! Total flux subtracted in 200 components = 0.0080038 Jy ! Clean residual min=-0.001880 max=0.001609 Jy/beam ! Clean residual mean=-0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0630265 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 70 components and 0.0630265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.683 mas, bmaj=17.95 mas, bpa=-15.41 degrees ! Estimated noise=663.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00059956 Jy ! Component: 100 - total flux cleaned = 0.000624467 Jy ! Component: 150 - total flux cleaned = 0.000624111 Jy ! Component: 200 - total flux cleaned = 0.000623705 Jy ! Total flux subtracted in 200 components = 0.000623705 Jy ! Clean residual min=-0.001853 max=0.001848 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.0636502 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62064e-05 Jy ! Component: 100 - total flux cleaned = -2.96255e-05 Jy ! Component: 150 - total flux cleaned = -2.90489e-05 Jy ! Component: 200 - total flux cleaned = -2.91088e-05 Jy ! Total flux subtracted in 200 components = -2.91088e-05 Jy ! Clean residual min=-0.001847 max=0.001831 Jy/beam ! Clean residual mean=0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.063621 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 94 components and 0.063621 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=17.7 mas, bpa=-18.86 degrees ! Estimated noise=564.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.96342e-05 Jy ! Component: 100 - total flux cleaned = 0.000163592 Jy ! Component: 150 - total flux cleaned = 0.000219126 Jy ! Component: 200 - total flux cleaned = 0.000232031 Jy ! Total flux subtracted in 200 components = 0.000232031 Jy ! Clean residual min=-0.001824 max=0.001583 Jy/beam ! Clean residual mean=0.000000 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.063853 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.0638531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077901Jy sigma=0.000665 ! Fit after self-cal, rms=0.077879Jy sigma=0.000664 wmodel J2116+0225_S_2017_10_21_pus_map.mod ! Writing 104 model components to file: J2116+0225_S_2017_10_21_pus_map.mod wobs J2116+0225_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2116+0225_S_2017_10_21_pus_uvs.fits wwins J2116+0225_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2116+0225_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448948 Jy ! Component: 100 - total flux cleaned = -0.000312098 Jy ! Component: 150 - total flux cleaned = -0.000158687 Jy ! Component: 200 - total flux cleaned = 8.32962e-05 Jy ! Component: 250 - total flux cleaned = 0.000315789 Jy ! Component: 300 - total flux cleaned = 0.000539108 Jy ! Component: 350 - total flux cleaned = 0.000711125 Jy ! Component: 400 - total flux cleaned = 0.000897791 Jy ! Component: 450 - total flux cleaned = 0.00105844 Jy ! Component: 500 - total flux cleaned = 0.0012333 Jy ! Component: 550 - total flux cleaned = 0.00140218 Jy ! Component: 600 - total flux cleaned = 0.00154761 Jy ! Component: 650 - total flux cleaned = 0.00168892 Jy ! Component: 700 - total flux cleaned = 0.00182628 Jy ! Component: 750 - total flux cleaned = 0.00196013 Jy ! Component: 800 - total flux cleaned = 0.00204161 Jy ! Component: 850 - total flux cleaned = 0.00212126 Jy ! Component: 900 - total flux cleaned = 0.00218335 Jy ! Component: 950 - total flux cleaned = 0.00219831 Jy ! Component: 1000 - total flux cleaned = 0.00225743 Jy ! Component: 1050 - total flux cleaned = 0.00225733 Jy ! Component: 1100 - total flux cleaned = 0.00227165 Jy ! Component: 1150 - total flux cleaned = 0.00228563 Jy ! Component: 1200 - total flux cleaned = 0.00225871 Jy ! Component: 1250 - total flux cleaned = 0.002272 Jy ! Component: 1300 - total flux cleaned = 0.0022589 Jy ! Component: 1350 - total flux cleaned = 0.00224616 Jy ! Component: 1400 - total flux cleaned = 0.00224621 Jy ! Component: 1450 - total flux cleaned = 0.00225877 Jy ! Component: 1500 - total flux cleaned = 0.0022592 Jy ! Component: 1550 - total flux cleaned = 0.00224751 Jy ! Component: 1600 - total flux cleaned = 0.00225944 Jy ! Component: 1650 - total flux cleaned = 0.00227096 Jy ! Component: 1700 - total flux cleaned = 0.00228221 Jy ! Component: 1750 - total flux cleaned = 0.00225991 Jy ! Component: 1800 - total flux cleaned = 0.00225991 Jy ! Component: 1850 - total flux cleaned = 0.00223833 Jy ! Component: 1900 - total flux cleaned = 0.00224919 Jy ! Component: 1950 - total flux cleaned = 0.00224936 Jy ! Component: 2000 - total flux cleaned = 0.00222875 Jy ! Component: 2050 - total flux cleaned = 0.00222893 Jy ! Component: 2100 - total flux cleaned = 0.00226946 Jy ! Component: 2150 - total flux cleaned = 0.00226962 Jy ! Component: 2200 - total flux cleaned = 0.00227956 Jy ! Component: 2250 - total flux cleaned = 0.0022698 Jy ! Component: 2300 - total flux cleaned = 0.00230836 Jy ! Component: 2350 - total flux cleaned = 0.00232758 Jy ! Component: 2400 - total flux cleaned = 0.00238402 Jy ! Component: 2450 - total flux cleaned = 0.00242109 Jy ! Component: 2500 - total flux cleaned = 0.00243947 Jy ! Component: 2550 - total flux cleaned = 0.00245777 Jy ! Component: 2600 - total flux cleaned = 0.00247584 Jy ! Component: 2650 - total flux cleaned = 0.00250274 Jy ! Component: 2700 - total flux cleaned = 0.00253814 Jy ! Component: 2750 - total flux cleaned = 0.00252944 Jy ! Component: 2800 - total flux cleaned = 0.00255545 Jy ! Component: 2850 - total flux cleaned = 0.00255537 Jy ! Component: 2900 - total flux cleaned = 0.00254678 Jy ! Component: 2950 - total flux cleaned = 0.00253836 Jy ! Component: 3000 - total flux cleaned = 0.00256339 Jy ! Component: 3050 - total flux cleaned = 0.00255504 Jy ! Component: 3100 - total flux cleaned = 0.00257153 Jy ! Component: 3150 - total flux cleaned = 0.00257971 Jy ! Component: 3200 - total flux cleaned = 0.00257155 Jy ! Component: 3250 - total flux cleaned = 0.0025635 Jy ! Component: 3300 - total flux cleaned = 0.00256346 Jy ! Component: 3350 - total flux cleaned = 0.00254756 Jy ! Component: 3400 - total flux cleaned = 0.00255552 Jy ! Component: 3450 - total flux cleaned = 0.00255557 Jy ! Component: 3500 - total flux cleaned = 0.00255556 Jy ! Component: 3550 - total flux cleaned = 0.00256328 Jy ! Component: 3600 - total flux cleaned = 0.00256334 Jy ! Component: 3650 - total flux cleaned = 0.00254045 Jy ! Component: 3700 - total flux cleaned = 0.00258601 Jy ! Component: 3750 - total flux cleaned = 0.00259347 Jy ! Component: 3800 - total flux cleaned = 0.00258598 Jy ! Component: 3850 - total flux cleaned = 0.0025935 Jy ! Component: 3900 - total flux cleaned = 0.00258603 Jy ! Component: 3950 - total flux cleaned = 0.00259344 Jy ! Component: 4000 - total flux cleaned = 0.00260812 Jy ! Component: 4050 - total flux cleaned = 0.0026081 Jy ! Total flux subtracted in 4096 components = 0.00261541 Jy ! Clean residual min=-0.000435 max=0.000461 Jy/beam ! Clean residual mean=0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0664685 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 391 components and 0.0664685 Jy ![Exited script file: muppet] wmap "J2116+0225_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 17.7 at -18.86 degrees (North through East) ! Clean map min=-0.0010529 max=0.043415 Jy/beam ! Writing clean map to FITS file: J2116+0225_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0434155 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138328 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.955846 0.955846 1.91169 3.82338 7.64677 15.2935 30.5871 61.1741 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.862 x 17.7 at -18.86 degrees (North through East) ! Clean map min=-0.0010529 max=0.043415 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2116+0225_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:34 2019