! Started logfile: J2115+2933_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:13 2019 obs J2115+2933_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2115+2933_S_2017_08_12_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.557778 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2115+2933_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.587674Jy sigma=0.006384 ! Fit after self-cal, rms=0.582127Jy sigma=0.006326 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=8.698 mas, bpa=-1.819 degrees ! Estimated noise=2624.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.319858 Jy ! Component: 100 - total flux cleaned = 0.406239 Jy ! Total flux subtracted in 100 components = 0.406239 Jy ! Clean residual min=-0.022748 max=0.040487 Jy/beam ! Clean residual mean=0.000188 rms=0.007894 Jy/beam ! Combined flux in latest and established models = 0.406239 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.406239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105150Jy sigma=0.001147 ! Fit after self-cal, rms=0.105140Jy sigma=0.001146 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.707 mas, bmaj=9.107 mas, bpa=-2.192 degrees ! Estimated noise=2291.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542521 Jy ! Component: 100 - total flux cleaned = 0.0836372 Jy ! Component: 150 - total flux cleaned = 0.102532 Jy ! Component: 200 - total flux cleaned = 0.115072 Jy ! Total flux subtracted in 200 components = 0.115072 Jy ! Clean residual min=-0.009965 max=0.017001 Jy/beam ! Clean residual mean=0.000086 rms=0.003819 Jy/beam ! Combined flux in latest and established models = 0.521311 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.521311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072282Jy sigma=0.000772 ! Fit after self-cal, rms=0.072285Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.94 KP 1.01 ! LA 0.97 MK 1.02 NL 0.88 OV 1.00 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 0.96 ! LA 0.94 MK 1.01 NL 1.19 OV 1.00 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 0.99 ! LA 0.95 MK 1.03 NL 1.17 OV 0.95 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.00* ! LA 0.96 MK 1.32 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.072285Jy sigma=0.000772 ! Fit after self-cal, rms=0.059643Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=9.152 mas, bpa=-2.179 degrees ! Estimated noise=2267.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140669 Jy ! Component: 100 - total flux cleaned = 0.00189784 Jy ! Component: 150 - total flux cleaned = 0.00232171 Jy ! Component: 200 - total flux cleaned = 0.00250836 Jy ! Total flux subtracted in 200 components = 0.00250836 Jy ! Clean residual min=-0.006171 max=0.006366 Jy/beam ! Clean residual mean=0.000008 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.523819 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.523819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059533Jy sigma=0.000620 ! Fit after self-cal, rms=0.059576Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059576Jy sigma=0.000620 ! Fit after self-cal, rms=0.059583Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.737 mas, bmaj=9.145 mas, bpa=-2.195 degrees ! Estimated noise=2268.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834605 Jy ! Component: 100 - total flux cleaned = 0.00123374 Jy ! Component: 150 - total flux cleaned = 0.00158704 Jy ! Component: 200 - total flux cleaned = 0.00174754 Jy ! Total flux subtracted in 200 components = 0.00174754 Jy ! Clean residual min=-0.006072 max=0.006185 Jy/beam ! Clean residual mean=0.000008 rms=0.001482 Jy/beam ! Combined flux in latest and established models = 0.525567 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.525567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059514Jy sigma=0.000619 ! Fit after self-cal, rms=0.059515Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259578 Jy ! Component: 100 - total flux cleaned = 0.000444359 Jy ! Component: 150 - total flux cleaned = 0.000510268 Jy ! Component: 200 - total flux cleaned = 0.000602583 Jy ! Total flux subtracted in 200 components = 0.000602583 Jy ! Clean residual min=-0.006006 max=0.006118 Jy/beam ! Clean residual mean=0.000007 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.52617 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.52617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059474Jy sigma=0.000618 ! Fit after self-cal, rms=0.059478Jy sigma=0.000618 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059478Jy sigma=0.000618 ! Fit after self-cal, rms=0.059528Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=9.142 mas, bpa=-2.212 degrees ! Estimated noise=2271.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493613 Jy ! Component: 100 - total flux cleaned = 0.000822318 Jy ! Component: 150 - total flux cleaned = 0.000954783 Jy ! Component: 200 - total flux cleaned = 0.00110897 Jy ! Total flux subtracted in 200 components = 0.00110897 Jy ! Clean residual min=-0.006033 max=0.006002 Jy/beam ! Clean residual mean=0.000007 rms=0.001438 Jy/beam ! Combined flux in latest and established models = 0.527278 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.527278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059488Jy sigma=0.000618 ! Fit after self-cal, rms=0.059491Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237035 Jy ! Component: 100 - total flux cleaned = 0.000236632 Jy ! Component: 150 - total flux cleaned = 0.000237293 Jy ! Component: 200 - total flux cleaned = 0.000237676 Jy ! Total flux subtracted in 200 components = 0.000237676 Jy ! Clean residual min=-0.005926 max=0.005955 Jy/beam ! Clean residual mean=0.000007 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.527516 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.527516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059467Jy sigma=0.000618 ! Fit after self-cal, rms=0.059470Jy sigma=0.000618 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059470Jy sigma=0.000618 ! Fit after self-cal, rms=0.059532Jy sigma=0.000618 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.351 mas, bmaj=14.21 mas, bpa=-11.35 degrees ! Estimated noise=3046.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125436 Jy ! Component: 100 - total flux cleaned = 0.00119253 Jy ! Component: 150 - total flux cleaned = 0.00123334 Jy ! Component: 200 - total flux cleaned = 0.00131512 Jy ! Total flux subtracted in 200 components = 0.00131512 Jy ! Clean residual min=-0.007030 max=0.006852 Jy/beam ! Clean residual mean=0.000017 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.528831 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.528831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059573Jy sigma=0.000618 ! Fit after self-cal, rms=0.059555Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239786 Jy ! Component: 100 - total flux cleaned = 0.000238658 Jy ! Component: 150 - total flux cleaned = 0.000350271 Jy ! Component: 200 - total flux cleaned = 0.000420742 Jy ! Total flux subtracted in 200 components = 0.000420742 Jy ! Clean residual min=-0.006922 max=0.006843 Jy/beam ! Clean residual mean=0.000015 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 0.529252 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 0.529252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059600Jy sigma=0.000618 ! Fit after self-cal, rms=0.059582Jy sigma=0.000618 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=9.141 mas, bpa=-2.22 degrees ! Estimated noise=2273.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.74 x 9.141 at -2.22 degrees (North through East) ! Clean map min=-0.0062831 max=0.42237 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=8.702 mas, bpa=-1.815 degrees ! Estimated noise=2617.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.317707 Jy ! Component: 100 - total flux cleaned = 0.40073 Jy ! Component: 150 - total flux cleaned = 0.441993 Jy ! Component: 200 - total flux cleaned = 0.464985 Jy ! Total flux subtracted in 200 components = 0.464985 Jy ! Clean residual min=-0.010584 max=0.013174 Jy/beam ! Clean residual mean=0.000077 rms=0.003331 Jy/beam ! Combined flux in latest and established models = 0.464985 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.464985 Jy ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=9.141 mas, bpa=-2.22 degrees ! Estimated noise=2273.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021182 Jy ! Component: 100 - total flux cleaned = 0.0346565 Jy ! Component: 150 - total flux cleaned = 0.0434259 Jy ! Component: 200 - total flux cleaned = 0.0491916 Jy ! Total flux subtracted in 200 components = 0.0491916 Jy ! Clean residual min=-0.006474 max=0.005586 Jy/beam ! Clean residual mean=0.000027 rms=0.001668 Jy/beam ! Combined flux in latest and established models = 0.514176 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 59 components and 0.514176 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.351 mas, bmaj=14.21 mas, bpa=-11.35 degrees ! Estimated noise=3046.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788837 Jy ! Component: 100 - total flux cleaned = 0.0114916 Jy ! Component: 150 - total flux cleaned = 0.0132778 Jy ! Component: 200 - total flux cleaned = 0.0135936 Jy ! Total flux subtracted in 200 components = 0.0135936 Jy ! Clean residual min=-0.007066 max=0.006827 Jy/beam ! Clean residual mean=0.000021 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.52777 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198067 Jy ! Component: 100 - total flux cleaned = 0.000378295 Jy ! Component: 150 - total flux cleaned = 0.000543909 Jy ! Component: 200 - total flux cleaned = 0.0006971 Jy ! Total flux subtracted in 200 components = 0.0006971 Jy ! Clean residual min=-0.006781 max=0.006809 Jy/beam ! Clean residual mean=0.000018 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 0.528467 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.528467 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=9.141 mas, bpa=-2.22 degrees ! Estimated noise=2273.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00127435 Jy ! Component: 100 - total flux cleaned = -0.0015426 Jy ! Component: 150 - total flux cleaned = -0.00147739 Jy ! Component: 200 - total flux cleaned = -0.00153734 Jy ! Total flux subtracted in 200 components = -0.00153734 Jy ! Clean residual min=-0.006332 max=0.005787 Jy/beam ! Clean residual mean=0.000009 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.52693 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.52693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059598Jy sigma=0.000618 ! Fit after self-cal, rms=0.059553Jy sigma=0.000618 wmodel J2115+2933_S_2017_08_12_pus_map.mod ! Writing 79 model components to file: J2115+2933_S_2017_08_12_pus_map.mod wobs J2115+2933_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2115+2933_S_2017_08_12_pus_uvs.fits wwins J2115+2933_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J2115+2933_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145124 Jy ! Component: 100 - total flux cleaned = -0.00247878 Jy ! Component: 150 - total flux cleaned = -0.00264413 Jy ! Component: 200 - total flux cleaned = -0.0031713 Jy ! Component: 250 - total flux cleaned = -0.00366202 Jy ! Component: 300 - total flux cleaned = -0.00418636 Jy ! Component: 350 - total flux cleaned = -0.0046203 Jy ! Component: 400 - total flux cleaned = -0.00473778 Jy ! Component: 450 - total flux cleaned = -0.00490518 Jy ! Component: 500 - total flux cleaned = -0.00490521 Jy ! Component: 550 - total flux cleaned = -0.00490606 Jy ! Component: 600 - total flux cleaned = -0.00490555 Jy ! Component: 650 - total flux cleaned = -0.00485732 Jy ! Component: 700 - total flux cleaned = -0.00463625 Jy ! Component: 750 - total flux cleaned = -0.00442515 Jy ! Component: 800 - total flux cleaned = -0.00442505 Jy ! Component: 850 - total flux cleaned = -0.00422926 Jy ! Component: 900 - total flux cleaned = -0.00419278 Jy ! Component: 950 - total flux cleaned = -0.00400916 Jy ! Component: 1000 - total flux cleaned = -0.00393756 Jy ! Component: 1050 - total flux cleaned = -0.00386773 Jy ! Component: 1100 - total flux cleaned = -0.00390137 Jy ! Component: 1150 - total flux cleaned = -0.00396611 Jy ! Component: 1200 - total flux cleaned = -0.00390199 Jy ! Component: 1250 - total flux cleaned = -0.0040575 Jy ! Component: 1300 - total flux cleaned = -0.00408714 Jy ! Component: 1350 - total flux cleaned = -0.00417621 Jy ! Component: 1400 - total flux cleaned = -0.00429258 Jy ! Component: 1450 - total flux cleaned = -0.00440601 Jy ! Component: 1500 - total flux cleaned = -0.00443378 Jy ! Component: 1550 - total flux cleaned = -0.00448872 Jy ! Component: 1600 - total flux cleaned = -0.00454255 Jy ! Component: 1650 - total flux cleaned = -0.00459574 Jy ! Component: 1700 - total flux cleaned = -0.00467376 Jy ! Component: 1750 - total flux cleaned = -0.00475 Jy ! Component: 1800 - total flux cleaned = -0.00482515 Jy ! Component: 1850 - total flux cleaned = -0.0048746 Jy ! Component: 1900 - total flux cleaned = -0.00494768 Jy ! Component: 1950 - total flux cleaned = -0.00504332 Jy ! Component: 2000 - total flux cleaned = -0.00506625 Jy ! Component: 2050 - total flux cleaned = -0.00508945 Jy ! Component: 2100 - total flux cleaned = -0.00515829 Jy ! Component: 2150 - total flux cleaned = -0.00520332 Jy ! Component: 2200 - total flux cleaned = -0.00524776 Jy ! Component: 2250 - total flux cleaned = -0.00533582 Jy ! Component: 2300 - total flux cleaned = -0.00540112 Jy ! Component: 2350 - total flux cleaned = -0.00535797 Jy ! Component: 2400 - total flux cleaned = -0.00540082 Jy ! Component: 2450 - total flux cleaned = -0.0053583 Jy ! Component: 2500 - total flux cleaned = -0.00531612 Jy ! Component: 2550 - total flux cleaned = -0.00531607 Jy ! Component: 2600 - total flux cleaned = -0.00529528 Jy ! Component: 2650 - total flux cleaned = -0.00527441 Jy ! Component: 2700 - total flux cleaned = -0.00527442 Jy ! Component: 2750 - total flux cleaned = -0.00521363 Jy ! Component: 2800 - total flux cleaned = -0.00525425 Jy ! Component: 2850 - total flux cleaned = -0.00523416 Jy ! Component: 2900 - total flux cleaned = -0.00521413 Jy ! Component: 2950 - total flux cleaned = -0.00521414 Jy ! Component: 3000 - total flux cleaned = -0.00525395 Jy ! Component: 3050 - total flux cleaned = -0.00523427 Jy ! Component: 3100 - total flux cleaned = -0.005175 Jy ! Component: 3150 - total flux cleaned = -0.00509622 Jy ! Component: 3200 - total flux cleaned = -0.00499781 Jy ! Component: 3250 - total flux cleaned = -0.00493897 Jy ! Component: 3300 - total flux cleaned = -0.00488016 Jy ! Component: 3350 - total flux cleaned = -0.00486056 Jy ! Component: 3400 - total flux cleaned = -0.00476257 Jy ! Component: 3450 - total flux cleaned = -0.0046255 Jy ! Component: 3500 - total flux cleaned = -0.00452743 Jy ! Component: 3550 - total flux cleaned = -0.00442919 Jy ! Component: 3600 - total flux cleaned = -0.0042718 Jy ! Component: 3650 - total flux cleaned = -0.00415345 Jy ! Component: 3700 - total flux cleaned = -0.00403484 Jy ! Component: 3750 - total flux cleaned = -0.00395552 Jy ! Component: 3800 - total flux cleaned = -0.00383595 Jy ! Component: 3850 - total flux cleaned = -0.00375593 Jy ! Component: 3900 - total flux cleaned = -0.00365576 Jy ! Component: 3950 - total flux cleaned = -0.00357513 Jy ! Component: 4000 - total flux cleaned = -0.00351461 Jy ! Component: 4050 - total flux cleaned = -0.00345365 Jy ! Total flux subtracted in 4096 components = -0.00339234 Jy ! Clean residual min=-0.001121 max=0.001267 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.523538 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 339 components and 0.523538 Jy ![Exited script file: muppet] wmap "J2115+2933_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.74 x 9.141 at -2.22 degrees (North through East) ! Clean map min=-0.0035965 max=0.422 Jy/beam ! Writing clean map to FITS file: J2115+2933_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.422002 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337518 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.239941 0.239941 0.479882 0.959763 1.91953 3.83905 7.6781 15.3562 30.7124 61.4248 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.422 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.74 x 9.141 at -2.22 degrees (North through East) ! Clean map min=-0.0035965 max=0.422 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2115+2933_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:17 2019