! Started logfile: J2115+2933_S_2017_07_16_pus_uvs.log on Thu May 9 11:19:28 2019 obs J2115+2933_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2115+2933_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.406667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2115+2933_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.599975Jy sigma=0.005276 ! Fit after self-cal, rms=0.591077Jy sigma=0.005205 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=7.431 mas, bpa=-35.34 degrees ! Estimated noise=4325.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310188 Jy ! Component: 100 - total flux cleaned = 0.410747 Jy ! Total flux subtracted in 100 components = 0.410747 Jy ! Clean residual min=-0.024407 max=0.048079 Jy/beam ! Clean residual mean=0.000054 rms=0.009295 Jy/beam ! Combined flux in latest and established models = 0.410747 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.410747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119608Jy sigma=0.000965 ! Fit after self-cal, rms=0.119435Jy sigma=0.000963 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=8.071 mas, bpa=-35.12 degrees ! Estimated noise=3664.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552043 Jy ! Component: 100 - total flux cleaned = 0.0805325 Jy ! Component: 150 - total flux cleaned = 0.0953682 Jy ! Component: 200 - total flux cleaned = 0.105512 Jy ! Total flux subtracted in 200 components = 0.105512 Jy ! Clean residual min=-0.014865 max=0.017757 Jy/beam ! Clean residual mean=0.000034 rms=0.004496 Jy/beam ! Combined flux in latest and established models = 0.516259 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.516259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091920Jy sigma=0.000734 ! Fit after self-cal, rms=0.091825Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.92 KP 1.01 ! LA 1.00* MK 0.98 NL 0.92 OV 1.00* ! PT 1.02 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 0.97 ! LA 1.00* MK 0.96 NL 1.07 OV 1.00* ! PT 1.00 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 1.01 KP 0.96 ! LA 1.00* MK 1.08 NL 1.04 OV 1.00* ! PT 0.99 SC 1.04 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.091825Jy sigma=0.000733 ! Fit after self-cal, rms=0.083241Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=8.002 mas, bpa=-34.74 degrees ! Estimated noise=3692.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837085 Jy ! Component: 100 - total flux cleaned = 0.0137503 Jy ! Component: 150 - total flux cleaned = 0.0174432 Jy ! Component: 200 - total flux cleaned = 0.019317 Jy ! Total flux subtracted in 200 components = 0.019317 Jy ! Clean residual min=-0.009605 max=0.008971 Jy/beam ! Clean residual mean=0.000011 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 0.535576 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.535576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082186Jy sigma=0.000662 ! Fit after self-cal, rms=0.082212Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082212Jy sigma=0.000662 ! Fit after self-cal, rms=0.082336Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.87 mas, bmaj=7.996 mas, bpa=-34.82 degrees ! Estimated noise=3701.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456928 Jy ! Component: 100 - total flux cleaned = 0.00748182 Jy ! Component: 150 - total flux cleaned = 0.00927103 Jy ! Component: 200 - total flux cleaned = 0.0104231 Jy ! Total flux subtracted in 200 components = 0.0104231 Jy ! Clean residual min=-0.008424 max=0.008224 Jy/beam ! Clean residual mean=0.000006 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 0.545999 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.545999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082010Jy sigma=0.000658 ! Fit after self-cal, rms=0.082013Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214853 Jy ! Component: 100 - total flux cleaned = 0.0028977 Jy ! Component: 150 - total flux cleaned = 0.00361932 Jy ! Component: 200 - total flux cleaned = 0.00421702 Jy ! Total flux subtracted in 200 components = 0.00421702 Jy ! Clean residual min=-0.008126 max=0.007970 Jy/beam ! Clean residual mean=0.000003 rms=0.001999 Jy/beam ! Combined flux in latest and established models = 0.550216 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.550216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081920Jy sigma=0.000657 ! Fit after self-cal, rms=0.081930Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081930Jy sigma=0.000657 ! Fit after self-cal, rms=0.081903Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.869 mas, bmaj=7.989 mas, bpa=-34.85 degrees ! Estimated noise=3704.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193635 Jy ! Component: 100 - total flux cleaned = 0.00329873 Jy ! Component: 150 - total flux cleaned = 0.00428758 Jy ! Component: 200 - total flux cleaned = 0.00471918 Jy ! Total flux subtracted in 200 components = 0.00471918 Jy ! Clean residual min=-0.007438 max=0.007670 Jy/beam ! Clean residual mean=0.000002 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.554936 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.554936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081837Jy sigma=0.000656 ! Fit after self-cal, rms=0.081839Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785481 Jy ! Component: 100 - total flux cleaned = 0.000919495 Jy ! Component: 150 - total flux cleaned = 0.000951061 Jy ! Component: 200 - total flux cleaned = 0.001012 Jy ! Total flux subtracted in 200 components = 0.001012 Jy ! Clean residual min=-0.007277 max=0.007609 Jy/beam ! Clean residual mean=0.000002 rms=0.001873 Jy/beam ! Combined flux in latest and established models = 0.555948 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.555948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081812Jy sigma=0.000655 ! Fit after self-cal, rms=0.081817Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081817Jy sigma=0.000655 ! Fit after self-cal, rms=0.081812Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.748 mas, bmaj=8.243 mas, bpa=-34.99 degrees ! Estimated noise=4777.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171576 Jy ! Component: 100 - total flux cleaned = 0.00160025 Jy ! Component: 150 - total flux cleaned = 0.00157441 Jy ! Component: 200 - total flux cleaned = 0.0015484 Jy ! Total flux subtracted in 200 components = 0.0015484 Jy ! Clean residual min=-0.007448 max=0.009058 Jy/beam ! Clean residual mean=0.000004 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 0.557496 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.557496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081796Jy sigma=0.000655 ! Fit after self-cal, rms=0.081801Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.0221e-05 Jy ! Component: 100 - total flux cleaned = -2.10951e-05 Jy ! Component: 150 - total flux cleaned = -4.32028e-05 Jy ! Component: 200 - total flux cleaned = -4.26408e-05 Jy ! Total flux subtracted in 200 components = -4.26408e-05 Jy ! Clean residual min=-0.007469 max=0.009003 Jy/beam ! Clean residual mean=0.000004 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.557453 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.557453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081797Jy sigma=0.000655 ! Fit after self-cal, rms=0.081802Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=7.985 mas, bpa=-34.85 degrees ! Estimated noise=3707.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.868 x 7.985 at -34.85 degrees (North through East) ! Clean map min=-0.0068703 max=0.41246 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.538 mas, bmaj=7.31 mas, bpa=-34.87 degrees ! Estimated noise=4334.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.308482 Jy ! Component: 100 - total flux cleaned = 0.405608 Jy ! Component: 150 - total flux cleaned = 0.451774 Jy ! Component: 200 - total flux cleaned = 0.474436 Jy ! Total flux subtracted in 200 components = 0.474436 Jy ! Clean residual min=-0.015662 max=0.013812 Jy/beam ! Clean residual mean=0.000031 rms=0.003902 Jy/beam ! Combined flux in latest and established models = 0.474436 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.474436 Jy ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=7.985 mas, bpa=-34.85 degrees ! Estimated noise=3707.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200059 Jy ! Component: 100 - total flux cleaned = 0.0324925 Jy ! Component: 150 - total flux cleaned = 0.0419823 Jy ! Component: 200 - total flux cleaned = 0.0494655 Jy ! Total flux subtracted in 200 components = 0.0494655 Jy ! Clean residual min=-0.010226 max=0.008629 Jy/beam ! Clean residual mean=0.000027 rms=0.002634 Jy/beam ! Combined flux in latest and established models = 0.523902 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.523902 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.748 mas, bmaj=8.243 mas, bpa=-34.99 degrees ! Estimated noise=4777.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107403 Jy ! Component: 100 - total flux cleaned = 0.0172203 Jy ! Component: 150 - total flux cleaned = 0.0217759 Jy ! Component: 200 - total flux cleaned = 0.0250374 Jy ! Total flux subtracted in 200 components = 0.0250374 Jy ! Clean residual min=-0.008468 max=0.009043 Jy/beam ! Clean residual mean=0.000019 rms=0.002713 Jy/beam ! Combined flux in latest and established models = 0.548939 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234698 Jy ! Component: 100 - total flux cleaned = 0.00405564 Jy ! Component: 150 - total flux cleaned = 0.00475714 Jy ! Component: 200 - total flux cleaned = 0.0051821 Jy ! Total flux subtracted in 200 components = 0.0051821 Jy ! Clean residual min=-0.007521 max=0.008782 Jy/beam ! Clean residual mean=0.000009 rms=0.002528 Jy/beam ! Combined flux in latest and established models = 0.554121 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.554121 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=7.985 mas, bpa=-34.85 degrees ! Estimated noise=3707.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118202 Jy ! Component: 100 - total flux cleaned = 0.00201108 Jy ! Component: 150 - total flux cleaned = 0.00257936 Jy ! Component: 200 - total flux cleaned = 0.00308479 Jy ! Total flux subtracted in 200 components = 0.00308479 Jy ! Clean residual min=-0.007401 max=0.007594 Jy/beam ! Clean residual mean=0.000001 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.557206 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.557206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081906Jy sigma=0.000656 ! Fit after self-cal, rms=0.081890Jy sigma=0.000656 wmodel J2115+2933_S_2017_07_16_pus_map.mod ! Writing 86 model components to file: J2115+2933_S_2017_07_16_pus_map.mod wobs J2115+2933_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2115+2933_S_2017_07_16_pus_uvs.fits wwins J2115+2933_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J2115+2933_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152224 Jy ! Component: 100 - total flux cleaned = 0.00273054 Jy ! Component: 150 - total flux cleaned = 0.00273564 Jy ! Component: 200 - total flux cleaned = 0.00263907 Jy ! Component: 250 - total flux cleaned = 0.00236717 Jy ! Component: 300 - total flux cleaned = 0.00228414 Jy ! Component: 350 - total flux cleaned = 0.00220416 Jy ! Component: 400 - total flux cleaned = 0.0020585 Jy ! Component: 450 - total flux cleaned = 0.00199255 Jy ! Component: 500 - total flux cleaned = 0.00173178 Jy ! Component: 550 - total flux cleaned = 0.00154554 Jy ! Component: 600 - total flux cleaned = 0.00136586 Jy ! Component: 650 - total flux cleaned = 0.0013088 Jy ! Component: 700 - total flux cleaned = 0.00130883 Jy ! Component: 750 - total flux cleaned = 0.0013595 Jy ! Component: 800 - total flux cleaned = 0.00150776 Jy ! Component: 850 - total flux cleaned = 0.00155544 Jy ! Component: 900 - total flux cleaned = 0.00169245 Jy ! Component: 950 - total flux cleaned = 0.00173619 Jy ! Component: 1000 - total flux cleaned = 0.00177883 Jy ! Component: 1050 - total flux cleaned = 0.00185992 Jy ! Component: 1100 - total flux cleaned = 0.00178021 Jy ! Component: 1150 - total flux cleaned = 0.00162438 Jy ! Component: 1200 - total flux cleaned = 0.00151077 Jy ! Component: 1250 - total flux cleaned = 0.00147348 Jy ! Component: 1300 - total flux cleaned = 0.00154805 Jy ! Component: 1350 - total flux cleaned = 0.00154784 Jy ! Component: 1400 - total flux cleaned = 0.0015477 Jy ! Component: 1450 - total flux cleaned = 0.00151246 Jy ! Component: 1500 - total flux cleaned = 0.00154782 Jy ! Component: 1550 - total flux cleaned = 0.00172067 Jy ! Component: 1600 - total flux cleaned = 0.00172031 Jy ! Component: 1650 - total flux cleaned = 0.0017539 Jy ! Component: 1700 - total flux cleaned = 0.00192154 Jy ! Component: 1750 - total flux cleaned = 0.00202132 Jy ! Component: 1800 - total flux cleaned = 0.00205432 Jy ! Component: 1850 - total flux cleaned = 0.00215271 Jy ! Component: 1900 - total flux cleaned = 0.00225055 Jy ! Component: 1950 - total flux cleaned = 0.00238043 Jy ! Component: 2000 - total flux cleaned = 0.00234811 Jy ! Component: 2050 - total flux cleaned = 0.00241248 Jy ! Component: 2100 - total flux cleaned = 0.00244466 Jy ! Component: 2150 - total flux cleaned = 0.00244468 Jy ! Component: 2200 - total flux cleaned = 0.00254121 Jy ! Component: 2250 - total flux cleaned = 0.00257351 Jy ! Component: 2300 - total flux cleaned = 0.00263807 Jy ! Component: 2350 - total flux cleaned = 0.00263825 Jy ! Component: 2400 - total flux cleaned = 0.00273542 Jy ! Component: 2450 - total flux cleaned = 0.00273549 Jy ! Component: 2500 - total flux cleaned = 0.00273546 Jy ! Component: 2550 - total flux cleaned = 0.00270263 Jy ! Component: 2600 - total flux cleaned = 0.00273566 Jy ! Component: 2650 - total flux cleaned = 0.00270272 Jy ! Component: 2700 - total flux cleaned = 0.00263612 Jy ! Component: 2750 - total flux cleaned = 0.00263594 Jy ! Component: 2800 - total flux cleaned = 0.00256889 Jy ! Component: 2850 - total flux cleaned = 0.00253506 Jy ! Component: 2900 - total flux cleaned = 0.00256905 Jy ! Component: 2950 - total flux cleaned = 0.00260346 Jy ! Component: 3000 - total flux cleaned = 0.00256935 Jy ! Component: 3050 - total flux cleaned = 0.00243111 Jy ! Component: 3100 - total flux cleaned = 0.00239599 Jy ! Component: 3150 - total flux cleaned = 0.00232558 Jy ! Component: 3200 - total flux cleaned = 0.00225513 Jy ! Component: 3250 - total flux cleaned = 0.00225502 Jy ! Component: 3300 - total flux cleaned = 0.00225531 Jy ! Component: 3350 - total flux cleaned = 0.00214648 Jy ! Component: 3400 - total flux cleaned = 0.00221999 Jy ! Component: 3450 - total flux cleaned = 0.00222002 Jy ! Component: 3500 - total flux cleaned = 0.00229483 Jy ! Component: 3550 - total flux cleaned = 0.00233282 Jy ! Component: 3600 - total flux cleaned = 0.0023329 Jy ! Component: 3650 - total flux cleaned = 0.00244851 Jy ! Component: 3700 - total flux cleaned = 0.00252607 Jy ! Component: 3750 - total flux cleaned = 0.00260535 Jy ! Component: 3800 - total flux cleaned = 0.00276569 Jy ! Component: 3850 - total flux cleaned = 0.00284724 Jy ! Component: 3900 - total flux cleaned = 0.00292934 Jy ! Component: 3950 - total flux cleaned = 0.00305402 Jy ! Component: 4000 - total flux cleaned = 0.00309603 Jy ! Component: 4050 - total flux cleaned = 0.00313775 Jy ! Total flux subtracted in 4096 components = 0.0032233 Jy ! Clean residual min=-0.002751 max=0.002817 Jy/beam ! Clean residual mean=0.000001 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.560429 Jy keep ! Adding 213 model components to the UV plane model. ! The established model now contains 299 components and 0.560429 Jy ![Exited script file: muppet] wmap "J2115+2933_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.868 x 7.985 at -34.85 degrees (North through East) ! Clean map min=-0.0035716 max=0.4119 Jy/beam ! Writing clean map to FITS file: J2115+2933_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.4119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000748908 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.545454 0.545454 1.09091 2.18182 4.36363 8.72726 17.4545 34.909 69.8181 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.411 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.868 x 7.985 at -34.85 degrees (North through East) ! Clean map min=-0.0035716 max=0.4119 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2115+2933_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:19:33 2019