! Started logfile: J2115+2933_S_2017_01_21_pus_uvs.log on Sun May 5 16:03:32 2019 obs J2115+2933_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2115+2933_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J2115+2933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2115+2933_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.557864Jy sigma=0.003586 ! Fit after self-cal, rms=0.554687Jy sigma=0.003565 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.278 mas, bpa=22.65 degrees ! Estimated noise=4661.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.377892 Jy ! Component: 100 - total flux cleaned = 0.460437 Jy ! Total flux subtracted in 100 components = 0.460437 Jy ! Clean residual min=-0.033122 max=0.059833 Jy/beam ! Clean residual mean=0.000002 rms=0.011397 Jy/beam ! Combined flux in latest and established models = 0.460437 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.460437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162034Jy sigma=0.000993 ! Fit after self-cal, rms=0.162024Jy sigma=0.000993 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=7.733 mas, bpa=23.13 degrees ! Estimated noise=3969.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324289 Jy ! Component: 100 - total flux cleaned = 0.0421972 Jy ! Component: 150 - total flux cleaned = 0.0425902 Jy ! Component: 200 - total flux cleaned = 0.0419638 Jy ! Total flux subtracted in 200 components = 0.0419638 Jy ! Clean residual min=-0.034308 max=0.055568 Jy/beam ! Clean residual mean=-0.000018 rms=0.011303 Jy/beam ! Combined flux in latest and established models = 0.502401 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.502401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162698Jy sigma=0.000897 ! Fit after self-cal, rms=0.162663Jy sigma=0.000897 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.01 LA 0.96 ! MK 0.93 NL 0.91 OV 1.89 PT 0.92 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.01 LA 0.98 ! MK 0.96 NL 0.90 OV 1.91 PT 0.86 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 LA 0.93 ! MK 0.99 NL 0.89 OV 1.77 PT 0.87 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.10 LA 1.13 ! MK 0.93 NL 1.00* OV 1.73 PT 0.92 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.162663Jy sigma=0.000897 ! Fit after self-cal, rms=0.156086Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=7.683 mas, bpa=22.81 degrees ! Estimated noise=3947.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00761223 Jy ! Component: 100 - total flux cleaned = 0.00988981 Jy ! Component: 150 - total flux cleaned = 0.0115062 Jy ! Component: 200 - total flux cleaned = 0.0122186 Jy ! Total flux subtracted in 200 components = 0.0122186 Jy ! Clean residual min=-0.009949 max=0.013221 Jy/beam ! Clean residual mean=-0.000001 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.514619 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.514619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155604Jy sigma=0.000631 ! Fit after self-cal, rms=0.156602Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156602Jy sigma=0.000630 ! Fit after self-cal, rms=0.157462Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.034 mas, bmaj=7.666 mas, bpa=22.74 degrees ! Estimated noise=3947.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472285 Jy ! Component: 100 - total flux cleaned = 0.00682878 Jy ! Component: 150 - total flux cleaned = 0.00781439 Jy ! Component: 200 - total flux cleaned = 0.00848026 Jy ! Total flux subtracted in 200 components = 0.00848026 Jy ! Clean residual min=-0.009139 max=0.011855 Jy/beam ! Clean residual mean=-0.000001 rms=0.002570 Jy/beam ! Combined flux in latest and established models = 0.5231 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.5231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157250Jy sigma=0.000626 ! Fit after self-cal, rms=0.157278Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (34, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00921817 Jy ! Component: 100 - total flux cleaned = 0.0121893 Jy ! Component: 150 - total flux cleaned = 0.0141363 Jy ! Component: 200 - total flux cleaned = 0.0151974 Jy ! Total flux subtracted in 200 components = 0.0151974 Jy ! Clean residual min=-0.007529 max=0.007703 Jy/beam ! Clean residual mean=0.000000 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 0.538297 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 0.538297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156056Jy sigma=0.000618 ! Fit after self-cal, rms=0.156113Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156113Jy sigma=0.000617 ! Fit after self-cal, rms=0.157055Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.659 mas, bpa=22.69 degrees ! Estimated noise=3938.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284846 Jy ! Component: 100 - total flux cleaned = 0.00340471 Jy ! Component: 150 - total flux cleaned = 0.00399331 Jy ! Component: 200 - total flux cleaned = 0.00424907 Jy ! Total flux subtracted in 200 components = 0.00424907 Jy ! Clean residual min=-0.007183 max=0.007756 Jy/beam ! Clean residual mean=0.000000 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.542546 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.542546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156758Jy sigma=0.000615 ! Fit after self-cal, rms=0.156786Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127.5, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230929 Jy ! Component: 100 - total flux cleaned = 0.00208446 Jy ! Component: 150 - total flux cleaned = 0.00208293 Jy ! Component: 200 - total flux cleaned = 0.00230043 Jy ! Total flux subtracted in 200 components = 0.00230043 Jy ! Clean residual min=-0.006627 max=0.007151 Jy/beam ! Clean residual mean=-0.000000 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.544846 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.544846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156331Jy sigma=0.000611 ! Fit after self-cal, rms=0.156289Jy sigma=0.000611 ! Inverting map ! Added new window around map position (-122, -91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140645 Jy ! Component: 100 - total flux cleaned = 0.00137573 Jy ! Component: 150 - total flux cleaned = 0.00208874 Jy ! Component: 200 - total flux cleaned = 0.0022891 Jy ! Total flux subtracted in 200 components = 0.0022891 Jy ! Clean residual min=-0.006313 max=0.005992 Jy/beam ! Clean residual mean=0.000000 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.547136 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.547135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155583Jy sigma=0.000608 ! Fit after self-cal, rms=0.155467Jy sigma=0.000608 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155467Jy sigma=0.000608 ! Fit after self-cal, rms=0.155233Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.136 mas, bmaj=9.448 mas, bpa=12.28 degrees ! Estimated noise=5449.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528687 Jy ! Component: 100 - total flux cleaned = 5.3318e-05 Jy ! Component: 150 - total flux cleaned = 0.000164677 Jy ! Component: 200 - total flux cleaned = 6.72864e-05 Jy ! Total flux subtracted in 200 components = 6.72864e-05 Jy ! Clean residual min=-0.007706 max=0.007450 Jy/beam ! Clean residual mean=-0.000001 rms=0.002036 Jy/beam ! Combined flux in latest and established models = 0.547203 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 137 components and 0.547203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155024Jy sigma=0.000607 ! Fit after self-cal, rms=0.154937Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172998 Jy ! Component: 100 - total flux cleaned = 0.000110657 Jy ! Component: 150 - total flux cleaned = 0.000465476 Jy ! Component: 200 - total flux cleaned = 0.000636532 Jy ! Total flux subtracted in 200 components = 0.000636532 Jy ! Clean residual min=-0.006975 max=0.007170 Jy/beam ! Clean residual mean=0.000002 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.547839 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 0.547839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154813Jy sigma=0.000606 ! Fit after self-cal, rms=0.154774Jy sigma=0.000606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.658 mas, bpa=22.72 degrees ! Estimated noise=3934.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.658 at 22.72 degrees (North through East) ! Clean map min=-0.0076099 max=0.49549 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=7.226 mas, bpa=22.21 degrees ! Estimated noise=4695.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.379318 Jy ! Component: 100 - total flux cleaned = 0.462576 Jy ! Component: 150 - total flux cleaned = 0.486173 Jy ! Component: 200 - total flux cleaned = 0.494801 Jy ! Total flux subtracted in 200 components = 0.494801 Jy ! Clean residual min=-0.013482 max=0.012879 Jy/beam ! Clean residual mean=0.000002 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.494802 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.494802 Jy ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.658 mas, bpa=22.72 degrees ! Estimated noise=3934.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147485 Jy ! Component: 100 - total flux cleaned = 0.0235095 Jy ! Component: 150 - total flux cleaned = 0.0268736 Jy ! Component: 200 - total flux cleaned = 0.0300773 Jy ! Total flux subtracted in 200 components = 0.0300773 Jy ! Clean residual min=-0.008428 max=0.007900 Jy/beam ! Clean residual mean=0.000001 rms=0.002281 Jy/beam ! Combined flux in latest and established models = 0.524879 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 46 components and 0.524879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.136 mas, bmaj=9.448 mas, bpa=12.28 degrees ! Estimated noise=5449.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590008 Jy ! Component: 100 - total flux cleaned = 0.00824609 Jy ! Component: 150 - total flux cleaned = 0.010206 Jy ! Component: 200 - total flux cleaned = 0.0119478 Jy ! Total flux subtracted in 200 components = 0.0119478 Jy ! Clean residual min=-0.008828 max=0.007487 Jy/beam ! Clean residual mean=-0.000000 rms=0.002377 Jy/beam ! Combined flux in latest and established models = 0.536826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111159 Jy ! Component: 100 - total flux cleaned = 0.00214374 Jy ! Component: 150 - total flux cleaned = 0.00262549 Jy ! Component: 200 - total flux cleaned = 0.00296428 Jy ! Total flux subtracted in 200 components = 0.00296428 Jy ! Clean residual min=-0.007899 max=0.007442 Jy/beam ! Clean residual mean=0.000000 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.539791 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 94 components and 0.539791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.658 mas, bpa=22.72 degrees ! Estimated noise=3934.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256119 Jy ! Component: 100 - total flux cleaned = 0.00391156 Jy ! Component: 150 - total flux cleaned = 0.00492713 Jy ! Component: 200 - total flux cleaned = 0.00537474 Jy ! Total flux subtracted in 200 components = 0.00537474 Jy ! Clean residual min=-0.006494 max=0.006281 Jy/beam ! Clean residual mean=0.000001 rms=0.001663 Jy/beam ! Combined flux in latest and established models = 0.545165 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.545165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155052Jy sigma=0.000609 ! Fit after self-cal, rms=0.155082Jy sigma=0.000609 wmodel J2115+2933_S_2017_01_21_pus_map.mod ! Writing 112 model components to file: J2115+2933_S_2017_01_21_pus_map.mod wobs J2115+2933_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2115+2933_S_2017_01_21_pus_uvs.fits wwins J2115+2933_S_2017_01_21_pus_map.win ! wwins: Wrote 4 windows to J2115+2933_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107056 Jy ! Component: 100 - total flux cleaned = -0.00249648 Jy ! Component: 150 - total flux cleaned = -0.00361428 Jy ! Component: 200 - total flux cleaned = -0.00467439 Jy ! Component: 250 - total flux cleaned = -0.00531625 Jy ! Component: 300 - total flux cleaned = -0.00558063 Jy ! Component: 350 - total flux cleaned = -0.00608904 Jy ! Component: 400 - total flux cleaned = -0.00657883 Jy ! Component: 450 - total flux cleaned = -0.00689247 Jy ! Component: 500 - total flux cleaned = -0.00727175 Jy ! Component: 550 - total flux cleaned = -0.00749231 Jy ! Component: 600 - total flux cleaned = -0.00763446 Jy ! Component: 650 - total flux cleaned = -0.00798153 Jy ! Component: 700 - total flux cleaned = -0.00804948 Jy ! Component: 750 - total flux cleaned = -0.00818197 Jy ! Component: 800 - total flux cleaned = -0.00831154 Jy ! Component: 850 - total flux cleaned = -0.00843834 Jy ! Component: 900 - total flux cleaned = -0.00843866 Jy ! Component: 950 - total flux cleaned = -0.00843869 Jy ! Component: 1000 - total flux cleaned = -0.00820347 Jy ! Component: 1050 - total flux cleaned = -0.00803133 Jy ! Component: 1100 - total flux cleaned = -0.00803166 Jy ! Component: 1150 - total flux cleaned = -0.00775228 Jy ! Component: 1200 - total flux cleaned = -0.00769803 Jy ! Component: 1250 - total flux cleaned = -0.00742941 Jy ! Component: 1300 - total flux cleaned = -0.00705944 Jy ! Component: 1350 - total flux cleaned = -0.00679922 Jy ! Component: 1400 - total flux cleaned = -0.00649096 Jy ! Component: 1450 - total flux cleaned = -0.00628823 Jy ! Component: 1500 - total flux cleaned = -0.00608798 Jy ! Component: 1550 - total flux cleaned = -0.00584205 Jy ! Component: 1600 - total flux cleaned = -0.00579254 Jy ! Component: 1650 - total flux cleaned = -0.00560034 Jy ! Component: 1700 - total flux cleaned = -0.00555267 Jy ! Component: 1750 - total flux cleaned = -0.00550592 Jy ! Component: 1800 - total flux cleaned = -0.00541372 Jy ! Component: 1850 - total flux cleaned = -0.00536795 Jy ! Component: 1900 - total flux cleaned = -0.00532218 Jy ! Component: 1950 - total flux cleaned = -0.00514303 Jy ! Component: 2000 - total flux cleaned = -0.00514327 Jy ! Component: 2050 - total flux cleaned = -0.00487879 Jy ! Component: 2100 - total flux cleaned = -0.00470384 Jy ! Component: 2150 - total flux cleaned = -0.00448741 Jy ! Component: 2200 - total flux cleaned = -0.0042293 Jy ! Component: 2250 - total flux cleaned = -0.00397302 Jy ! Component: 2300 - total flux cleaned = -0.00371854 Jy ! Component: 2350 - total flux cleaned = -0.00355004 Jy ! Component: 2400 - total flux cleaned = -0.00342423 Jy ! Component: 2450 - total flux cleaned = -0.00329916 Jy ! Component: 2500 - total flux cleaned = -0.00317476 Jy ! Component: 2550 - total flux cleaned = -0.00305082 Jy ! Component: 2600 - total flux cleaned = -0.00300999 Jy ! Component: 2650 - total flux cleaned = -0.0030511 Jy ! Component: 2700 - total flux cleaned = -0.00317333 Jy ! Component: 2750 - total flux cleaned = -0.00305173 Jy ! Component: 2800 - total flux cleaned = -0.00309229 Jy ! Component: 2850 - total flux cleaned = -0.0031326 Jy ! Component: 2900 - total flux cleaned = -0.00305213 Jy ! Component: 2950 - total flux cleaned = -0.00313249 Jy ! Component: 3000 - total flux cleaned = -0.00309234 Jy ! Component: 3050 - total flux cleaned = -0.00321235 Jy ! Component: 3100 - total flux cleaned = -0.00317234 Jy ! Component: 3150 - total flux cleaned = -0.00321215 Jy ! Component: 3200 - total flux cleaned = -0.00317239 Jy ! Component: 3250 - total flux cleaned = -0.00321259 Jy ! Component: 3300 - total flux cleaned = -0.00325236 Jy ! Component: 3350 - total flux cleaned = -0.00337148 Jy ! Component: 3400 - total flux cleaned = -0.00333183 Jy ! Component: 3450 - total flux cleaned = -0.00341146 Jy ! Component: 3500 - total flux cleaned = -0.00325226 Jy ! Component: 3550 - total flux cleaned = -0.00325223 Jy ! Component: 3600 - total flux cleaned = -0.00321209 Jy ! Component: 3650 - total flux cleaned = -0.00317215 Jy ! Component: 3700 - total flux cleaned = -0.00309251 Jy ! Component: 3750 - total flux cleaned = -0.00309236 Jy ! Component: 3800 - total flux cleaned = -0.00297267 Jy ! Component: 3850 - total flux cleaned = -0.00297259 Jy ! Component: 3900 - total flux cleaned = -0.00293236 Jy ! Component: 3950 - total flux cleaned = -0.00293237 Jy ! Component: 4000 - total flux cleaned = -0.00297243 Jy ! Component: 4050 - total flux cleaned = -0.00297261 Jy ! Total flux subtracted in 4096 components = -0.00289157 Jy ! Clean residual min=-0.002322 max=0.002481 Jy/beam ! Clean residual mean=-0.000009 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.542274 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 368 components and 0.542274 Jy ![Exited script file: muppet] wmap "J2115+2933_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.658 at 22.72 degrees (North through East) ! Clean map min=-0.0072493 max=0.49079 Jy/beam ! Writing clean map to FITS file: J2115+2933_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.490795 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000631989 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.386306 0.386306 0.772611 1.54522 3.09045 6.18089 12.3618 24.7236 49.4471 98.8943 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.49 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.032 x 7.658 at 22.72 degrees (North through East) ! Clean map min=-0.0072493 max=0.49079 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2115+2933_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:03:37 2019