! Started logfile: J2114+4634_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:41 2019 obs J2114+4634_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2114+4634_S_2017_10_09_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.665459 visibilities/baseline/integration-bin. ! Found source: J2114+4634 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11020 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2114+4634_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 413 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 708 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.934140Jy sigma=0.008581 ! Fit after self-cal, rms=0.925147Jy sigma=0.008503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.469 mas, bmaj=6.7 mas, bpa=26.24 degrees ! Estimated noise=1944.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554635 Jy ! Component: 100 - total flux cleaned = 0.0735887 Jy ! Total flux subtracted in 100 components = 0.0735887 Jy ! Clean residual min=-0.005694 max=0.008592 Jy/beam ! Clean residual mean=-0.000031 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.0735887 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0735887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084203Jy sigma=0.000664 ! Fit after self-cal, rms=0.084091Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.605 mas, bmaj=7.068 mas, bpa=17.58 degrees ! Estimated noise=939.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147566 Jy ! Component: 100 - total flux cleaned = 0.0227688 Jy ! Component: 150 - total flux cleaned = 0.0273137 Jy ! Component: 200 - total flux cleaned = 0.029912 Jy ! Total flux subtracted in 200 components = 0.029912 Jy ! Clean residual min=-0.002943 max=0.002630 Jy/beam ! Clean residual mean=-0.000028 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.103501 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 61 components and 0.103501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081292Jy sigma=0.000637 ! Fit after self-cal, rms=0.081167Jy sigma=0.000636 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 1.06 KP 1.03 ! LA 1.04 MK 1.06 NL 0.88 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.05 HN 1.06 KP 1.00 ! LA 1.01 MK 1.00* NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.04 KP 0.96 ! LA 0.82 MK 1.06 NL 1.05 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 327 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.081167Jy sigma=0.000636 ! Fit after self-cal, rms=0.079974Jy sigma=0.000636 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.561 mas, bmaj=7.307 mas, bpa=18.03 degrees ! Estimated noise=973.096 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843531 Jy ! Component: 100 - total flux cleaned = 0.00101199 Jy ! Component: 150 - total flux cleaned = 0.00103032 Jy ! Component: 200 - total flux cleaned = 0.0010477 Jy ! Total flux subtracted in 200 components = 0.0010477 Jy ! Clean residual min=-0.002484 max=0.002435 Jy/beam ! Clean residual mean=0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.104548 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 70 components and 0.104548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079953Jy sigma=0.000636 ! Fit after self-cal, rms=0.079917Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079917Jy sigma=0.000636 ! Fit after self-cal, rms=0.076853Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.528 mas, bmaj=7.351 mas, bpa=17.64 degrees ! Estimated noise=970.349 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725929 Jy ! Component: 100 - total flux cleaned = 0.000832896 Jy ! Component: 150 - total flux cleaned = 0.000902584 Jy ! Component: 200 - total flux cleaned = 0.000937129 Jy ! Total flux subtracted in 200 components = 0.000937129 Jy ! Clean residual min=-0.002418 max=0.002077 Jy/beam ! Clean residual mean=-0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.105485 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 0.105485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076843Jy sigma=0.000634 ! Fit after self-cal, rms=0.076815Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35804e-05 Jy ! Component: 100 - total flux cleaned = 0.000101103 Jy ! Component: 150 - total flux cleaned = 0.000125688 Jy ! Component: 200 - total flux cleaned = 0.000147593 Jy ! Total flux subtracted in 200 components = 0.000147593 Jy ! Clean residual min=-0.002381 max=0.002069 Jy/beam ! Clean residual mean=-0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.105633 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.105633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076813Jy sigma=0.000634 ! Fit after self-cal, rms=0.076813Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076813Jy sigma=0.000634 ! Fit after self-cal, rms=0.076414Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.51 mas, bmaj=7.317 mas, bpa=17.18 degrees ! Estimated noise=966.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557981 Jy ! Component: 100 - total flux cleaned = 0.000676021 Jy ! Component: 150 - total flux cleaned = 0.000734135 Jy ! Component: 200 - total flux cleaned = 0.000772176 Jy ! Total flux subtracted in 200 components = 0.000772176 Jy ! Clean residual min=-0.002339 max=0.002039 Jy/beam ! Clean residual mean=-0.000002 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.106405 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.106405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076408Jy sigma=0.000634 ! Fit after self-cal, rms=0.076404Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74799e-05 Jy ! Component: 100 - total flux cleaned = 6.0698e-05 Jy ! Component: 150 - total flux cleaned = 8.78704e-05 Jy ! Component: 200 - total flux cleaned = 0.000106079 Jy ! Total flux subtracted in 200 components = 0.000106079 Jy ! Clean residual min=-0.002322 max=0.002033 Jy/beam ! Clean residual mean=-0.000002 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.106511 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 87 components and 0.106511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076402Jy sigma=0.000634 ! Fit after self-cal, rms=0.076403Jy sigma=0.000634 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076403Jy sigma=0.000634 ! Fit after self-cal, rms=0.076085Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.418 mas, bmaj=9.7 mas, bpa=16.91 degrees ! Estimated noise=1089.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053971 Jy ! Component: 100 - total flux cleaned = 0.000642596 Jy ! Component: 150 - total flux cleaned = 0.000649608 Jy ! Component: 200 - total flux cleaned = 0.000649739 Jy ! Total flux subtracted in 200 components = 0.000649739 Jy ! Clean residual min=-0.002200 max=0.002029 Jy/beam ! Clean residual mean=-0.000004 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.107161 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 89 components and 0.107161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076082Jy sigma=0.000634 ! Fit after self-cal, rms=0.076079Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.28494e-05 Jy ! Component: 100 - total flux cleaned = 1.80968e-05 Jy ! Component: 150 - total flux cleaned = 2.28615e-05 Jy ! Component: 200 - total flux cleaned = 2.29399e-05 Jy ! Total flux subtracted in 200 components = 2.29399e-05 Jy ! Clean residual min=-0.002203 max=0.002032 Jy/beam ! Clean residual mean=-0.000004 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.107184 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 93 components and 0.107184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076078Jy sigma=0.000634 ! Fit after self-cal, rms=0.076078Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.494 mas, bmaj=7.284 mas, bpa=16.8 degrees ! Estimated noise=962.698 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.494 x 7.284 at 16.8 degrees (North through East) ! Clean map min=-0.0022628 max=0.072923 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.523 mas, bmaj=6.827 mas, bpa=25.12 degrees ! Estimated noise=1952.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549014 Jy ! Component: 100 - total flux cleaned = 0.0733585 Jy ! Component: 150 - total flux cleaned = 0.0840411 Jy ! Component: 200 - total flux cleaned = 0.0912009 Jy ! Total flux subtracted in 200 components = 0.0912009 Jy ! Clean residual min=-0.003793 max=0.004125 Jy/beam ! Clean residual mean=-0.000016 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.091201 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.091201 Jy ! Inverting map and beam ! Estimated beam: bmin=5.494 mas, bmaj=7.284 mas, bpa=16.8 degrees ! Estimated noise=962.698 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00695417 Jy ! Component: 100 - total flux cleaned = 0.0107305 Jy ! Component: 150 - total flux cleaned = 0.0129044 Jy ! Component: 200 - total flux cleaned = 0.0142005 Jy ! Total flux subtracted in 200 components = 0.0142005 Jy ! Clean residual min=-0.002538 max=0.002075 Jy/beam ! Clean residual mean=-0.000007 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.105401 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.105401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.418 mas, bmaj=9.7 mas, bpa=16.91 degrees ! Estimated noise=1089.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102897 Jy ! Component: 100 - total flux cleaned = 0.00149145 Jy ! Component: 150 - total flux cleaned = 0.00170293 Jy ! Component: 200 - total flux cleaned = 0.0017256 Jy ! Total flux subtracted in 200 components = 0.0017256 Jy ! Clean residual min=-0.002233 max=0.002026 Jy/beam ! Clean residual mean=-0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.107127 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90738e-05 Jy ! Component: 100 - total flux cleaned = 2.34592e-05 Jy ! Component: 150 - total flux cleaned = 2.75957e-05 Jy ! Component: 200 - total flux cleaned = 2.77846e-05 Jy ! Total flux subtracted in 200 components = 2.77846e-05 Jy ! Clean residual min=-0.002229 max=0.002024 Jy/beam ! Clean residual mean=-0.000004 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.107155 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 98 components and 0.107155 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.494 mas, bmaj=7.284 mas, bpa=16.8 degrees ! Estimated noise=962.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.14315e-06 Jy ! Component: 100 - total flux cleaned = 2.24941e-05 Jy ! Component: 150 - total flux cleaned = 2.99523e-05 Jy ! Component: 200 - total flux cleaned = 3.66699e-05 Jy ! Total flux subtracted in 200 components = 3.66699e-05 Jy ! Clean residual min=-0.002358 max=0.001962 Jy/beam ! Clean residual mean=-0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.107192 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 109 components and 0.107192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076078Jy sigma=0.000634 ! Fit after self-cal, rms=0.076076Jy sigma=0.000634 wmodel J2114+4634_S_2017_10_09_pus_map.mod ! Writing 109 model components to file: J2114+4634_S_2017_10_09_pus_map.mod wobs J2114+4634_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2114+4634_S_2017_10_09_pus_uvs.fits wwins J2114+4634_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2114+4634_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502024 Jy ! Component: 100 - total flux cleaned = -0.000369796 Jy ! Component: 150 - total flux cleaned = -3.22388e-05 Jy ! Component: 200 - total flux cleaned = 0.000284297 Jy ! Component: 250 - total flux cleaned = 0.00033879 Jy ! Component: 300 - total flux cleaned = 0.000339507 Jy ! Component: 350 - total flux cleaned = 0.000437415 Jy ! Component: 400 - total flux cleaned = 0.000460027 Jy ! Component: 450 - total flux cleaned = 0.000549716 Jy ! Component: 500 - total flux cleaned = 0.000636111 Jy ! Component: 550 - total flux cleaned = 0.00063587 Jy ! Component: 600 - total flux cleaned = 0.000656562 Jy ! Component: 650 - total flux cleaned = 0.000655936 Jy ! Component: 700 - total flux cleaned = 0.000522707 Jy ! Component: 750 - total flux cleaned = 0.000430702 Jy ! Component: 800 - total flux cleaned = 0.000377296 Jy ! Component: 850 - total flux cleaned = 0.00029001 Jy ! Component: 900 - total flux cleaned = 0.00025612 Jy ! Component: 950 - total flux cleaned = 0.000239218 Jy ! Component: 1000 - total flux cleaned = 0.000206652 Jy ! Component: 1050 - total flux cleaned = 0.00015928 Jy ! Component: 1100 - total flux cleaned = 0.000190757 Jy ! Component: 1150 - total flux cleaned = 0.000221346 Jy ! Component: 1200 - total flux cleaned = 0.00022087 Jy ! Component: 1250 - total flux cleaned = 0.000191478 Jy ! Component: 1300 - total flux cleaned = 0.000119438 Jy ! Component: 1350 - total flux cleaned = 0.00010536 Jy ! Component: 1400 - total flux cleaned = 4.98313e-05 Jy ! Component: 1450 - total flux cleaned = -4.22351e-06 Jy ! Component: 1500 - total flux cleaned = -3.08356e-05 Jy ! Component: 1550 - total flux cleaned = -3.07222e-05 Jy ! Component: 1600 - total flux cleaned = -7.03085e-05 Jy ! Component: 1650 - total flux cleaned = -0.000134722 Jy ! Component: 1700 - total flux cleaned = -0.000197909 Jy ! Component: 1750 - total flux cleaned = -0.000247746 Jy ! Component: 1800 - total flux cleaned = -0.000260005 Jy ! Component: 1850 - total flux cleaned = -0.000284324 Jy ! Component: 1900 - total flux cleaned = -0.000296271 Jy ! Component: 1950 - total flux cleaned = -0.00030829 Jy ! Component: 2000 - total flux cleaned = -0.00035498 Jy ! Component: 2050 - total flux cleaned = -0.000400924 Jy ! Component: 2100 - total flux cleaned = -0.000457507 Jy ! Component: 2150 - total flux cleaned = -0.000479934 Jy ! Component: 2200 - total flux cleaned = -0.000479877 Jy ! Component: 2250 - total flux cleaned = -0.000545338 Jy ! Component: 2300 - total flux cleaned = -0.00057768 Jy ! Component: 2350 - total flux cleaned = -0.000620262 Jy ! Component: 2400 - total flux cleaned = -0.000662404 Jy ! Component: 2450 - total flux cleaned = -0.000714658 Jy ! Component: 2500 - total flux cleaned = -0.000755901 Jy ! Component: 2550 - total flux cleaned = -0.000786639 Jy ! Component: 2600 - total flux cleaned = -0.000837473 Jy ! Component: 2650 - total flux cleaned = -0.00090787 Jy ! Component: 2700 - total flux cleaned = -0.000947761 Jy ! Component: 2750 - total flux cleaned = -0.00102688 Jy ! Component: 2800 - total flux cleaned = -0.0010759 Jy ! Component: 2850 - total flux cleaned = -0.00114374 Jy ! Component: 2900 - total flux cleaned = -0.00119178 Jy ! Component: 2950 - total flux cleaned = -0.00126799 Jy ! Component: 3000 - total flux cleaned = -0.00132456 Jy ! Component: 3050 - total flux cleaned = -0.00136204 Jy ! Component: 3100 - total flux cleaned = -0.00140856 Jy ! Component: 3150 - total flux cleaned = -0.00148249 Jy ! Component: 3200 - total flux cleaned = -0.00154671 Jy ! Component: 3250 - total flux cleaned = -0.00161032 Jy ! Component: 3300 - total flux cleaned = -0.00165546 Jy ! Component: 3350 - total flux cleaned = -0.00171817 Jy ! Component: 3400 - total flux cleaned = -0.00177151 Jy ! Component: 3450 - total flux cleaned = -0.00181565 Jy ! Component: 3500 - total flux cleaned = -0.00183322 Jy ! Component: 3550 - total flux cleaned = -0.0018769 Jy ! Component: 3600 - total flux cleaned = -0.0019463 Jy ! Component: 3650 - total flux cleaned = -0.00199797 Jy ! Component: 3700 - total flux cleaned = -0.00203229 Jy ! Component: 3750 - total flux cleaned = -0.00207488 Jy ! Component: 3800 - total flux cleaned = -0.00211734 Jy ! Component: 3850 - total flux cleaned = -0.00216794 Jy ! Component: 3900 - total flux cleaned = -0.00220999 Jy ! Component: 3950 - total flux cleaned = -0.00226017 Jy ! Component: 4000 - total flux cleaned = -0.00230181 Jy ! Component: 4050 - total flux cleaned = -0.00235159 Jy ! Total flux subtracted in 4096 components = -0.00239284 Jy ! Clean residual min=-0.000503 max=0.000519 Jy/beam ! Clean residual mean=0.000001 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.104799 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 362 components and 0.104799 Jy ![Exited script file: muppet] wmap "J2114+4634_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.494 x 7.284 at 16.8 degrees (North through East) ! Clean map min=-0.0013625 max=0.072803 Jy/beam ! Writing clean map to FITS file: J2114+4634_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0728033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000138435 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.570447 0.570447 1.14089 2.28179 4.56357 9.12715 18.2543 36.5086 73.0172 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.494 x 7.284 at 16.8 degrees (North through East) ! Clean map min=-0.0013625 max=0.072803 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2114+4634_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:20:46 2019