! Started logfile: J2113+1121_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:15 2019 obs J2113+1121_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2113+1121_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.972603 visibilities/baseline/integration-bin. ! Found source: J2113+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2113+1121_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 598 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955142Jy sigma=0.009531 ! Fit after self-cal, rms=0.932016Jy sigma=0.009301 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=12.84 mas, bpa=-20.88 degrees ! Estimated noise=995.004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534357 Jy ! Component: 100 - total flux cleaned = 0.0651451 Jy ! Total flux subtracted in 100 components = 0.0651451 Jy ! Clean residual min=-0.003762 max=0.003778 Jy/beam ! Clean residual mean=-0.000017 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.0651451 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0651451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082315Jy sigma=0.000722 ! Fit after self-cal, rms=0.082210Jy sigma=0.000721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=14.83 mas, bpa=-19.75 degrees ! Estimated noise=614.666 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527987 Jy ! Component: 100 - total flux cleaned = 0.00777761 Jy ! Component: 150 - total flux cleaned = 0.00928914 Jy ! Component: 200 - total flux cleaned = 0.0102585 Jy ! Total flux subtracted in 200 components = 0.0102585 Jy ! Clean residual min=-0.002437 max=0.002518 Jy/beam ! Clean residual mean=-0.000016 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0754036 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 41 components and 0.0754036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081831Jy sigma=0.000718 ! Fit after self-cal, rms=0.081812Jy sigma=0.000718 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 HN 0.94 KP 1.12 ! LA 1.07 MK 1.01 NL 1.00 OV 1.00 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.99 KP 1.09 ! LA 0.98 MK 1.06 NL 1.05 OV 1.05 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.07 KP 1.02 ! LA 0.79 MK 1.07 NL 1.19 OV 0.98 ! PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.02 KP 1.00* ! LA 0.83 MK 0.89 NL 1.00* OV 1.00* ! PT 0.91 ! ! ! Fit before self-cal, rms=0.081812Jy sigma=0.000718 ! Fit after self-cal, rms=0.078700Jy sigma=0.000714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=14.86 mas, bpa=-19.62 degrees ! Estimated noise=613.491 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000701931 Jy ! Component: 100 - total flux cleaned = -0.000798294 Jy ! Component: 150 - total flux cleaned = -0.000900523 Jy ! Component: 200 - total flux cleaned = -0.00095519 Jy ! Total flux subtracted in 200 components = -0.00095519 Jy ! Clean residual min=-0.001592 max=0.001680 Jy/beam ! Clean residual mean=0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0744484 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.0744484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078684Jy sigma=0.000714 ! Fit after self-cal, rms=0.078657Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078657Jy sigma=0.000714 ! Fit after self-cal, rms=0.079297Jy sigma=0.000713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=14.9 mas, bpa=-19.61 degrees ! Estimated noise=613.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000645137 Jy ! Component: 100 - total flux cleaned = -0.000707723 Jy ! Component: 150 - total flux cleaned = -0.000756582 Jy ! Component: 200 - total flux cleaned = -0.000800062 Jy ! Total flux subtracted in 200 components = -0.000800062 Jy ! Clean residual min=-0.001456 max=0.001675 Jy/beam ! Clean residual mean=0.000003 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0736484 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 73 components and 0.0736483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079287Jy sigma=0.000713 ! Fit after self-cal, rms=0.079321Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001415 Jy ! Component: 100 - total flux cleaned = -0.000154018 Jy ! Component: 150 - total flux cleaned = -0.000178481 Jy ! Component: 200 - total flux cleaned = -0.00020064 Jy ! Total flux subtracted in 200 components = -0.00020064 Jy ! Clean residual min=-0.001467 max=0.001604 Jy/beam ! Clean residual mean=0.000003 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0734477 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0734477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079317Jy sigma=0.000713 ! Fit after self-cal, rms=0.079317Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079317Jy sigma=0.000713 ! Fit after self-cal, rms=0.079774Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=14.92 mas, bpa=-19.6 degrees ! Estimated noise=613.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000439093 Jy ! Component: 100 - total flux cleaned = -0.000505765 Jy ! Component: 150 - total flux cleaned = -0.000517592 Jy ! Component: 200 - total flux cleaned = -0.000538652 Jy ! Total flux subtracted in 200 components = -0.000538652 Jy ! Clean residual min=-0.001424 max=0.001624 Jy/beam ! Clean residual mean=0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0729091 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.0729091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079768Jy sigma=0.000713 ! Fit after self-cal, rms=0.079786Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.25635e-05 Jy ! Component: 100 - total flux cleaned = -8.18921e-05 Jy ! Component: 150 - total flux cleaned = -8.16779e-05 Jy ! Component: 200 - total flux cleaned = -8.16765e-05 Jy ! Total flux subtracted in 200 components = -8.16765e-05 Jy ! Clean residual min=-0.001429 max=0.001593 Jy/beam ! Clean residual mean=0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0728274 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.0728274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079783Jy sigma=0.000713 ! Fit after self-cal, rms=0.079783Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079783Jy sigma=0.000713 ! Fit after self-cal, rms=0.080103Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=15.65 mas, bpa=-19.37 degrees ! Estimated noise=736.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198199 Jy ! Component: 100 - total flux cleaned = -0.00025621 Jy ! Component: 150 - total flux cleaned = -0.000301592 Jy ! Component: 200 - total flux cleaned = -0.000331852 Jy ! Total flux subtracted in 200 components = -0.000331852 Jy ! Clean residual min=-0.001592 max=0.001571 Jy/beam ! Clean residual mean=0.000007 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0724955 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 96 components and 0.0724955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080101Jy sigma=0.000713 ! Fit after self-cal, rms=0.080107Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.97303e-07 Jy ! Component: 100 - total flux cleaned = -2.01495e-05 Jy ! Component: 150 - total flux cleaned = -2.47473e-05 Jy ! Component: 200 - total flux cleaned = -3.34636e-05 Jy ! Total flux subtracted in 200 components = -3.34636e-05 Jy ! Clean residual min=-0.001576 max=0.001564 Jy/beam ! Clean residual mean=0.000007 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0724621 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 102 components and 0.0724621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080107Jy sigma=0.000713 ! Fit after self-cal, rms=0.080105Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=14.94 mas, bpa=-19.59 degrees ! Estimated noise=614.295 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 14.94 at -19.59 degrees (North through East) ! Clean map min=-0.0013542 max=0.070498 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=12.88 mas, bpa=-20.77 degrees ! Estimated noise=1006.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539553 Jy ! Component: 100 - total flux cleaned = 0.0659063 Jy ! Component: 150 - total flux cleaned = 0.0696249 Jy ! Component: 200 - total flux cleaned = 0.0699329 Jy ! Total flux subtracted in 200 components = 0.0699329 Jy ! Clean residual min=-0.003049 max=0.003190 Jy/beam ! Clean residual mean=-0.000002 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.0699329 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0699329 Jy ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=14.94 mas, bpa=-19.59 degrees ! Estimated noise=614.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193192 Jy ! Component: 100 - total flux cleaned = 0.00238242 Jy ! Component: 150 - total flux cleaned = 0.00251901 Jy ! Component: 200 - total flux cleaned = 0.00254612 Jy ! Total flux subtracted in 200 components = 0.00254612 Jy ! Clean residual min=-0.001456 max=0.001770 Jy/beam ! Clean residual mean=0.000004 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.072479 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.0724791 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.876 mas, bmaj=15.65 mas, bpa=-19.37 degrees ! Estimated noise=736.432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290803 Jy ! Component: 100 - total flux cleaned = 0.000242584 Jy ! Component: 150 - total flux cleaned = 0.000180222 Jy ! Component: 200 - total flux cleaned = 0.000129052 Jy ! Total flux subtracted in 200 components = 0.000129052 Jy ! Clean residual min=-0.001607 max=0.001573 Jy/beam ! Clean residual mean=0.000008 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0726081 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21677e-05 Jy ! Component: 100 - total flux cleaned = -3.57361e-05 Jy ! Component: 150 - total flux cleaned = -4.86047e-05 Jy ! Component: 200 - total flux cleaned = -5.45616e-05 Jy ! Total flux subtracted in 200 components = -5.45616e-05 Jy ! Clean residual min=-0.001587 max=0.001571 Jy/beam ! Clean residual mean=0.000008 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0725535 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.0725535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=14.94 mas, bpa=-19.59 degrees ! Estimated noise=614.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.00438e-05 Jy ! Component: 100 - total flux cleaned = -4.5859e-05 Jy ! Component: 150 - total flux cleaned = -6.04704e-05 Jy ! Component: 200 - total flux cleaned = -8.7037e-05 Jy ! Total flux subtracted in 200 components = -8.7037e-05 Jy ! Clean residual min=-0.001451 max=0.001629 Jy/beam ! Clean residual mean=0.000004 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0724665 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.0724665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080112Jy sigma=0.000713 ! Fit after self-cal, rms=0.080116Jy sigma=0.000713 wmodel J2113+1121_S_2017_10_21_pus_map.mod ! Writing 62 model components to file: J2113+1121_S_2017_10_21_pus_map.mod wobs J2113+1121_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2113+1121_S_2017_10_21_pus_uvs.fits wwins J2113+1121_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2113+1121_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00071307 Jy ! Component: 100 - total flux cleaned = 0.00116773 Jy ! Component: 150 - total flux cleaned = 0.00156719 Jy ! Component: 200 - total flux cleaned = 0.0018516 Jy ! Component: 250 - total flux cleaned = 0.00214364 Jy ! Component: 300 - total flux cleaned = 0.00242378 Jy ! Component: 350 - total flux cleaned = 0.00263154 Jy ! Component: 400 - total flux cleaned = 0.00283268 Jy ! Component: 450 - total flux cleaned = 0.0030679 Jy ! Component: 500 - total flux cleaned = 0.00327837 Jy ! Component: 550 - total flux cleaned = 0.00346525 Jy ! Component: 600 - total flux cleaned = 0.00366655 Jy ! Component: 650 - total flux cleaned = 0.00386319 Jy ! Component: 700 - total flux cleaned = 0.0039857 Jy ! Component: 750 - total flux cleaned = 0.00410589 Jy ! Component: 800 - total flux cleaned = 0.00422396 Jy ! Component: 850 - total flux cleaned = 0.00429047 Jy ! Component: 900 - total flux cleaned = 0.00440416 Jy ! Component: 950 - total flux cleaned = 0.00446799 Jy ! Component: 1000 - total flux cleaned = 0.00453076 Jy ! Component: 1050 - total flux cleaned = 0.00457708 Jy ! Component: 1100 - total flux cleaned = 0.0046227 Jy ! Component: 1150 - total flux cleaned = 0.00468269 Jy ! Component: 1200 - total flux cleaned = 0.00475659 Jy ! Component: 1250 - total flux cleaned = 0.00482917 Jy ! Component: 1300 - total flux cleaned = 0.00485792 Jy ! Component: 1350 - total flux cleaned = 0.00492905 Jy ! Component: 1400 - total flux cleaned = 0.00495697 Jy ! Component: 1450 - total flux cleaned = 0.0050261 Jy ! Component: 1500 - total flux cleaned = 0.00508049 Jy ! Component: 1550 - total flux cleaned = 0.00512085 Jy ! Component: 1600 - total flux cleaned = 0.00518747 Jy ! Component: 1650 - total flux cleaned = 0.0052663 Jy ! Component: 1700 - total flux cleaned = 0.00529232 Jy ! Component: 1750 - total flux cleaned = 0.00538206 Jy ! Component: 1800 - total flux cleaned = 0.00540739 Jy ! Component: 1850 - total flux cleaned = 0.00543246 Jy ! Component: 1900 - total flux cleaned = 0.00545713 Jy ! Component: 1950 - total flux cleaned = 0.00550602 Jy ! Component: 2000 - total flux cleaned = 0.00549406 Jy ! Component: 2050 - total flux cleaned = 0.00551786 Jy ! Component: 2100 - total flux cleaned = 0.00552965 Jy ! Component: 2150 - total flux cleaned = 0.00552969 Jy ! Component: 2200 - total flux cleaned = 0.00552963 Jy ! Component: 2250 - total flux cleaned = 0.00556402 Jy ! Component: 2300 - total flux cleaned = 0.0055299 Jy ! Component: 2350 - total flux cleaned = 0.00554129 Jy ! Component: 2400 - total flux cleaned = 0.00554139 Jy ! Component: 2450 - total flux cleaned = 0.00554145 Jy ! Component: 2500 - total flux cleaned = 0.00557435 Jy ! Component: 2550 - total flux cleaned = 0.00556356 Jy ! Component: 2600 - total flux cleaned = 0.00554214 Jy ! Component: 2650 - total flux cleaned = 0.00554232 Jy ! Component: 2700 - total flux cleaned = 0.00557404 Jy ! Component: 2750 - total flux cleaned = 0.00558446 Jy ! Component: 2800 - total flux cleaned = 0.00557403 Jy ! Component: 2850 - total flux cleaned = 0.0055842 Jy ! Component: 2900 - total flux cleaned = 0.00558418 Jy ! Component: 2950 - total flux cleaned = 0.00561452 Jy ! Component: 3000 - total flux cleaned = 0.00558444 Jy ! Component: 3050 - total flux cleaned = 0.00561442 Jy ! Component: 3100 - total flux cleaned = 0.00564407 Jy ! Component: 3150 - total flux cleaned = 0.00566359 Jy ! Component: 3200 - total flux cleaned = 0.00566364 Jy ! Component: 3250 - total flux cleaned = 0.00567331 Jy ! Component: 3300 - total flux cleaned = 0.00568282 Jy ! Component: 3350 - total flux cleaned = 0.0056922 Jy ! Component: 3400 - total flux cleaned = 0.00567329 Jy ! Component: 3450 - total flux cleaned = 0.00570143 Jy ! Component: 3500 - total flux cleaned = 0.00568279 Jy ! Component: 3550 - total flux cleaned = 0.00567357 Jy ! Component: 3600 - total flux cleaned = 0.00569188 Jy ! Component: 3650 - total flux cleaned = 0.00567354 Jy ! Component: 3700 - total flux cleaned = 0.00564625 Jy ! Component: 3750 - total flux cleaned = 0.00562824 Jy ! Component: 3800 - total flux cleaned = 0.00563721 Jy ! Component: 3850 - total flux cleaned = 0.00565504 Jy ! Component: 3900 - total flux cleaned = 0.00564617 Jy ! Component: 3950 - total flux cleaned = 0.00567257 Jy ! Component: 4000 - total flux cleaned = 0.00568131 Jy ! Component: 4050 - total flux cleaned = 0.00567261 Jy ! Total flux subtracted in 4096 components = 0.00570717 Jy ! Clean residual min=-0.000502 max=0.000485 Jy/beam ! Clean residual mean=0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0781736 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 338 components and 0.0781737 Jy ![Exited script file: muppet] wmap "J2113+1121_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 14.94 at -19.59 degrees (North through East) ! Clean map min=-0.0012479 max=0.070577 Jy/beam ! Writing clean map to FITS file: J2113+1121_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0705771 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000162816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.692076 0.692076 1.38415 2.76831 5.53661 11.0732 22.1464 44.2929 88.5858 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.533 x 14.94 at -19.59 degrees (North through East) ! Clean map min=-0.0012479 max=0.070577 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2113+1121_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:20 2019