! Started logfile: J2109-4110_S_2017_07_16_pus_uvs.log on Thu May 9 11:19:24 2019 obs J2109-4110_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2017_07_16_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.215385 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.500315Jy sigma=0.003031 ! Fit after self-cal, rms=0.486239Jy sigma=0.002949 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=46.74 mas, bpa=9.362 degrees ! Estimated noise=7059.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.433693 Jy ! Component: 100 - total flux cleaned = 0.62878 Jy ! Total flux subtracted in 100 components = 0.62878 Jy ! Clean residual min=-0.048057 max=0.094546 Jy/beam ! Clean residual mean=-0.001495 rms=0.025837 Jy/beam ! Combined flux in latest and established models = 0.62878 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.62878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211729Jy sigma=0.001281 ! Fit after self-cal, rms=0.211357Jy sigma=0.001278 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=44.55 mas, bpa=9.118 degrees ! Estimated noise=6397.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134517 Jy ! Component: 100 - total flux cleaned = 0.191388 Jy ! Component: 150 - total flux cleaned = 0.211599 Jy ! Component: 200 - total flux cleaned = 0.221781 Jy ! Total flux subtracted in 200 components = 0.221781 Jy ! Clean residual min=-0.015487 max=0.015771 Jy/beam ! Clean residual mean=-0.000482 rms=0.006409 Jy/beam ! Combined flux in latest and established models = 0.850562 Jy ! Performing phase self-cal ! Adding 75 model components to the UV plane model. ! The established model now contains 81 components and 0.850562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110286Jy sigma=0.000659 ! Fit after self-cal, rms=0.110042Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.04 ! LA 1.00 MK 1.00* NL 1.00* OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.95 ! LA 0.94 MK 1.00* NL 1.00* OV 1.05 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.93 ! LA 1.00* MK 1.00* NL 1.00* OV 0.94 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.110042Jy sigma=0.000658 ! Fit after self-cal, rms=0.100579Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=44.44 mas, bpa=9.115 degrees ! Estimated noise=6320.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00998605 Jy ! Component: 100 - total flux cleaned = 0.00791507 Jy ! Component: 150 - total flux cleaned = 0.00581073 Jy ! Component: 200 - total flux cleaned = 0.00549038 Jy ! Total flux subtracted in 200 components = 0.00549038 Jy ! Clean residual min=-0.005380 max=0.005331 Jy/beam ! Clean residual mean=0.000033 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.856052 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 115 components and 0.856052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098490Jy sigma=0.000606 ! Fit after self-cal, rms=0.098248Jy sigma=0.000605 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098248Jy sigma=0.000605 ! Fit after self-cal, rms=0.098065Jy sigma=0.000604 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=44.41 mas, bpa=9.12 degrees ! Estimated noise=6316.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385838 Jy ! Component: 100 - total flux cleaned = 0.00385791 Jy ! Component: 150 - total flux cleaned = 0.004007 Jy ! Component: 200 - total flux cleaned = 0.00455756 Jy ! Total flux subtracted in 200 components = 0.00455756 Jy ! Clean residual min=-0.002262 max=0.002317 Jy/beam ! Clean residual mean=0.000007 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.86061 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.86061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097695Jy sigma=0.000601 ! Fit after self-cal, rms=0.097672Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635925 Jy ! Component: 100 - total flux cleaned = 0.000903104 Jy ! Component: 150 - total flux cleaned = 0.00106226 Jy ! Component: 200 - total flux cleaned = 0.00137681 Jy ! Total flux subtracted in 200 components = 0.00137681 Jy ! Clean residual min=-0.001331 max=0.001322 Jy/beam ! Clean residual mean=-0.000010 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.861987 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 188 components and 0.861986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097562Jy sigma=0.000600 ! Fit after self-cal, rms=0.097560Jy sigma=0.000600 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097560Jy sigma=0.000600 ! Fit after self-cal, rms=0.097365Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=44.43 mas, bpa=9.122 degrees ! Estimated noise=6306.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008805 Jy ! Component: 100 - total flux cleaned = 0.00139709 Jy ! Component: 150 - total flux cleaned = 0.00171109 Jy ! Component: 200 - total flux cleaned = 0.001962 Jy ! Total flux subtracted in 200 components = 0.001962 Jy ! Clean residual min=-0.000821 max=0.000827 Jy/beam ! Clean residual mean=-0.000003 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.863948 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 231 components and 0.863948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097315Jy sigma=0.000600 ! Fit after self-cal, rms=0.097314Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.71746e-05 Jy ! Component: 100 - total flux cleaned = -0.000106014 Jy ! Component: 150 - total flux cleaned = 5.28335e-05 Jy ! Component: 200 - total flux cleaned = 0.000223147 Jy ! Total flux subtracted in 200 components = 0.000223147 Jy ! Clean residual min=-0.000719 max=0.000720 Jy/beam ! Clean residual mean=0.000000 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.864172 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 276 components and 0.864172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097289Jy sigma=0.000600 ! Fit after self-cal, rms=0.097287Jy sigma=0.000600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097287Jy sigma=0.000600 ! Fit after self-cal, rms=0.097262Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.08 mas, bmaj=46.87 mas, bpa=0.2172 degrees ! Estimated noise=7992.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351679 Jy ! Component: 100 - total flux cleaned = 0.000480519 Jy ! Component: 150 - total flux cleaned = 0.00048289 Jy ! Component: 200 - total flux cleaned = 0.000484267 Jy ! Total flux subtracted in 200 components = 0.000484267 Jy ! Clean residual min=-0.000711 max=0.000714 Jy/beam ! Clean residual mean=0.000007 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.864656 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 320 components and 0.864656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097243Jy sigma=0.000600 ! Fit after self-cal, rms=0.097242Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363106 Jy ! Component: 100 - total flux cleaned = -0.000283056 Jy ! Component: 150 - total flux cleaned = -0.000202058 Jy ! Component: 200 - total flux cleaned = -7.18393e-05 Jy ! Total flux subtracted in 200 components = -7.18393e-05 Jy ! Clean residual min=-0.000763 max=0.000769 Jy/beam ! Clean residual mean=0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.864584 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 353 components and 0.864584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097232Jy sigma=0.000600 ! Fit after self-cal, rms=0.097231Jy sigma=0.000600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=44.44 mas, bpa=9.123 degrees ! Estimated noise=6304.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 44.44 at 9.123 degrees (North through East) ! Clean map min=-0.0075047 max=0.5875 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097231Jy sigma=0.000600 ! Fit after self-cal, rms=0.081210Jy sigma=0.000482 ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=44.41 mas, bpa=9.125 degrees ! Estimated noise=6309.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729826 Jy ! Component: 100 - total flux cleaned = -0.000852205 Jy ! Component: 150 - total flux cleaned = -0.000964493 Jy ! Component: 200 - total flux cleaned = -0.00103576 Jy ! Total flux subtracted in 200 components = -0.00103576 Jy ! Clean residual min=-0.000575 max=0.000577 Jy/beam ! Clean residual mean=0.000003 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.863548 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 404 components and 0.863548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081160Jy sigma=0.000482 ! Fit after self-cal, rms=0.081163Jy sigma=0.000482 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290484 Jy ! Component: 100 - total flux cleaned = 0.000321529 Jy ! Component: 150 - total flux cleaned = 0.00029182 Jy ! Component: 200 - total flux cleaned = 0.000232686 Jy ! Total flux subtracted in 200 components = 0.000232686 Jy ! Clean residual min=-0.000491 max=0.000487 Jy/beam ! Clean residual mean=0.000004 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.863781 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 452 components and 0.863781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081134Jy sigma=0.000481 ! Fit after self-cal, rms=0.081141Jy sigma=0.000481 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081141Jy sigma=0.000481 ! Fit after self-cal, rms=0.081193Jy sigma=0.000481 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=46.7 mas, bpa=9.381 degrees ! Estimated noise=6959.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.424724 Jy ! Component: 100 - total flux cleaned = 0.615126 Jy ! Component: 150 - total flux cleaned = 0.71853 Jy ! Component: 200 - total flux cleaned = 0.775195 Jy ! Total flux subtracted in 200 components = 0.775195 Jy ! Clean residual min=-0.025943 max=0.027777 Jy/beam ! Clean residual mean=-0.000629 rms=0.009783 Jy/beam ! Combined flux in latest and established models = 0.775195 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.775195 Jy ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=44.41 mas, bpa=9.126 degrees ! Estimated noise=6310.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0328282 Jy ! Component: 100 - total flux cleaned = 0.0405849 Jy ! Component: 150 - total flux cleaned = 0.0423892 Jy ! Component: 200 - total flux cleaned = 0.0456523 Jy ! Total flux subtracted in 200 components = 0.0456523 Jy ! Clean residual min=-0.012797 max=0.012920 Jy/beam ! Clean residual mean=-0.000201 rms=0.004780 Jy/beam ! Combined flux in latest and established models = 0.820848 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 90 components and 0.820848 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.08 mas, bmaj=46.87 mas, bpa=0.2088 degrees ! Estimated noise=7993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00155719 Jy ! Component: 100 - total flux cleaned = 0.0039808 Jy ! Component: 150 - total flux cleaned = 0.00651263 Jy ! Component: 200 - total flux cleaned = 0.00872078 Jy ! Total flux subtracted in 200 components = 0.00872078 Jy ! Clean residual min=-0.003146 max=0.003206 Jy/beam ! Clean residual mean=-0.000086 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.829568 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00294998 Jy ! Component: 100 - total flux cleaned = 0.00628052 Jy ! Component: 150 - total flux cleaned = 0.0104442 Jy ! Component: 200 - total flux cleaned = 0.0128878 Jy ! Total flux subtracted in 200 components = 0.0128878 Jy ! Clean residual min=-0.002937 max=0.002973 Jy/beam ! Clean residual mean=-0.000016 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.842456 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 222 components and 0.842456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=44.41 mas, bpa=9.126 degrees ! Estimated noise=6310.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.65738e-05 Jy ! Component: 100 - total flux cleaned = 0.000165106 Jy ! Component: 150 - total flux cleaned = 0.000392749 Jy ! Component: 200 - total flux cleaned = 0.000504118 Jy ! Total flux subtracted in 200 components = 0.000504118 Jy ! Clean residual min=-0.001731 max=0.001754 Jy/beam ! Clean residual mean=0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.842961 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 260 components and 0.842961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081381Jy sigma=0.000483 ! Fit after self-cal, rms=0.081369Jy sigma=0.000483 wmodel J2109-4110_S_2017_07_16_pus_map.mod ! Writing 260 model components to file: J2109-4110_S_2017_07_16_pus_map.mod wobs J2109-4110_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2017_07_16_pus_uvs.fits wwins J2109-4110_S_2017_07_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2109-4110_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 44.41 at 9.126 degrees (North through East) ! Clean map min=-0.010504 max=0.57814 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.578141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000561848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.291546 0.291546 0.583091 1.16618 2.33236 4.66473 9.32946 18.6589 37.3178 74.6357 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.578 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.231 x 44.41 at 9.126 degrees (North through East) ! Clean map min=-0.010504 max=0.57814 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:19:28 2019