! Started logfile: J2109-4110_S_2017_07_09_pus_uvs.log on Wed May 8 14:58:18 2019 obs J2109-4110_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2017_07_09_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.206667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.462303Jy sigma=0.002945 ! Fit after self-cal, rms=0.446026Jy sigma=0.002844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=60.15 mas, bpa=5.441 degrees ! Estimated noise=7709.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.465919 Jy ! Component: 100 - total flux cleaned = 0.67293 Jy ! Total flux subtracted in 100 components = 0.67293 Jy ! Clean residual min=-0.056688 max=0.097669 Jy/beam ! Clean residual mean=0.001251 rms=0.030282 Jy/beam ! Combined flux in latest and established models = 0.67293 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.67293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227527Jy sigma=0.001409 ! Fit after self-cal, rms=0.227110Jy sigma=0.001406 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=63.72 mas, bpa=5.674 degrees ! Estimated noise=6795.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146794 Jy ! Component: 100 - total flux cleaned = 0.18733 Jy ! Component: 150 - total flux cleaned = 0.195949 Jy ! Component: 200 - total flux cleaned = 0.204701 Jy ! Total flux subtracted in 200 components = 0.204701 Jy ! Clean residual min=-0.013973 max=0.013970 Jy/beam ! Clean residual mean=-0.000009 rms=0.007564 Jy/beam ! Combined flux in latest and established models = 0.877632 Jy ! Performing phase self-cal ! Adding 105 model components to the UV plane model. ! The established model now contains 110 components and 0.877632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110177Jy sigma=0.000688 ! Fit after self-cal, rms=0.109988Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 1.04 ! LA 1.01 MK 1.00* NL 1.00* OV 1.00* ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.01 ! LA 0.95 MK 1.00* NL 1.00* OV 1.00* ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00* ! LA 0.92 MK 1.00* NL 1.00* OV 1.00* ! PT 0.93 SC 1.05 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.109988Jy sigma=0.000686 ! Fit after self-cal, rms=0.096349Jy sigma=0.000619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=61.51 mas, bpa=5.643 degrees ! Estimated noise=7146.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000918431 Jy ! Component: 100 - total flux cleaned = 0.00105154 Jy ! Component: 150 - total flux cleaned = 5.37237e-05 Jy ! Component: 200 - total flux cleaned = -0.000127068 Jy ! Total flux subtracted in 200 components = -0.000127068 Jy ! Clean residual min=-0.002939 max=0.002867 Jy/beam ! Clean residual mean=-0.000025 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.877505 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 173 components and 0.877505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094801Jy sigma=0.000609 ! Fit after self-cal, rms=0.094781Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094781Jy sigma=0.000609 ! Fit after self-cal, rms=0.094626Jy sigma=0.000608 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.638 mas, bmaj=61.53 mas, bpa=5.644 degrees ! Estimated noise=7137.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788454 Jy ! Component: 100 - total flux cleaned = -0.000828473 Jy ! Component: 150 - total flux cleaned = -0.00128092 Jy ! Component: 200 - total flux cleaned = -0.00118108 Jy ! Total flux subtracted in 200 components = -0.00118108 Jy ! Clean residual min=-0.002030 max=0.002037 Jy/beam ! Clean residual mean=-0.000003 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.876324 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 222 components and 0.876324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094383Jy sigma=0.000607 ! Fit after self-cal, rms=0.094383Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057486 Jy ! Component: 100 - total flux cleaned = -0.000276712 Jy ! Component: 150 - total flux cleaned = 9.03432e-05 Jy ! Component: 200 - total flux cleaned = 0.000569315 Jy ! Total flux subtracted in 200 components = 0.000569315 Jy ! Clean residual min=-0.001377 max=0.001359 Jy/beam ! Clean residual mean=-0.000011 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.876893 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 273 components and 0.876893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094287Jy sigma=0.000606 ! Fit after self-cal, rms=0.094282Jy sigma=0.000606 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094282Jy sigma=0.000606 ! Fit after self-cal, rms=0.094213Jy sigma=0.000606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=61.52 mas, bpa=5.645 degrees ! Estimated noise=7134.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000939689 Jy ! Component: 100 - total flux cleaned = -0.0012974 Jy ! Component: 150 - total flux cleaned = -0.00117758 Jy ! Component: 200 - total flux cleaned = -0.00111227 Jy ! Total flux subtracted in 200 components = -0.00111227 Jy ! Clean residual min=-0.001115 max=0.001116 Jy/beam ! Clean residual mean=-0.000011 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.875781 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 319 components and 0.875781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094159Jy sigma=0.000606 ! Fit after self-cal, rms=0.094159Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000325483 Jy ! Component: 100 - total flux cleaned = 0.000863097 Jy ! Component: 150 - total flux cleaned = 0.00132376 Jy ! Component: 200 - total flux cleaned = 0.00168303 Jy ! Total flux subtracted in 200 components = 0.00168303 Jy ! Clean residual min=-0.000731 max=0.000737 Jy/beam ! Clean residual mean=-0.000004 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.877464 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 366 components and 0.877464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094115Jy sigma=0.000605 ! Fit after self-cal, rms=0.094113Jy sigma=0.000605 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094113Jy sigma=0.000605 ! Fit after self-cal, rms=0.094091Jy sigma=0.000605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.71 mas, bmaj=56.59 mas, bpa=2.577 degrees ! Estimated noise=8889.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265138 Jy ! Component: 100 - total flux cleaned = -0.000292088 Jy ! Component: 150 - total flux cleaned = -0.000461583 Jy ! Component: 200 - total flux cleaned = -0.000742501 Jy ! Total flux subtracted in 200 components = -0.000742501 Jy ! Clean residual min=-0.000564 max=0.000551 Jy/beam ! Clean residual mean=0.000005 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.876721 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 401 components and 0.876721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094076Jy sigma=0.000605 ! Fit after self-cal, rms=0.094074Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272809 Jy ! Component: 100 - total flux cleaned = 0.000248042 Jy ! Component: 150 - total flux cleaned = 6.61912e-05 Jy ! Component: 200 - total flux cleaned = -7.80377e-05 Jy ! Total flux subtracted in 200 components = -7.80377e-05 Jy ! Clean residual min=-0.000514 max=0.000506 Jy/beam ! Clean residual mean=0.000013 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.876643 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 447 components and 0.876643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094062Jy sigma=0.000605 ! Fit after self-cal, rms=0.094061Jy sigma=0.000605 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=61.52 mas, bpa=5.645 degrees ! Estimated noise=7132.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.635 x 61.52 at 5.645 degrees (North through East) ! Clean map min=-0.010226 max=0.60548 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094061Jy sigma=0.000605 ! Fit after self-cal, rms=0.077986Jy sigma=0.000485 ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=61.52 mas, bpa=5.645 degrees ! Estimated noise=7131.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160213 Jy ! Component: 100 - total flux cleaned = -0.000183526 Jy ! Component: 150 - total flux cleaned = -0.00036351 Jy ! Component: 200 - total flux cleaned = -0.000363404 Jy ! Total flux subtracted in 200 components = -0.000363404 Jy ! Clean residual min=-0.000716 max=0.000714 Jy/beam ! Clean residual mean=-0.000004 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.87628 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 485 components and 0.87628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077929Jy sigma=0.000484 ! Fit after self-cal, rms=0.077933Jy sigma=0.000484 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283733 Jy ! Component: 100 - total flux cleaned = 0.000437524 Jy ! Component: 150 - total flux cleaned = 0.000512028 Jy ! Component: 200 - total flux cleaned = 0.000512026 Jy ! Total flux subtracted in 200 components = 0.000512026 Jy ! Clean residual min=-0.000587 max=0.000594 Jy/beam ! Clean residual mean=0.000007 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.876792 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 510 components and 0.876792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077904Jy sigma=0.000484 ! Fit after self-cal, rms=0.077906Jy sigma=0.000484 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077906Jy sigma=0.000484 ! Fit after self-cal, rms=0.077876Jy sigma=0.000484 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=60.46 mas, bpa=5.467 degrees ! Estimated noise=7883.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.464868 Jy ! Component: 100 - total flux cleaned = 0.669017 Jy ! Component: 150 - total flux cleaned = 0.775003 Jy ! Component: 200 - total flux cleaned = 0.828939 Jy ! Total flux subtracted in 200 components = 0.828939 Jy ! Clean residual min=-0.026575 max=0.026948 Jy/beam ! Clean residual mean=0.000080 rms=0.010640 Jy/beam ! Combined flux in latest and established models = 0.828939 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.828939 Jy ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=61.52 mas, bpa=5.645 degrees ! Estimated noise=7128.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221576 Jy ! Component: 100 - total flux cleaned = 0.0296573 Jy ! Component: 150 - total flux cleaned = 0.0287815 Jy ! Component: 200 - total flux cleaned = 0.0292401 Jy ! Total flux subtracted in 200 components = 0.0292401 Jy ! Clean residual min=-0.007579 max=0.007623 Jy/beam ! Clean residual mean=-0.000137 rms=0.003861 Jy/beam ! Combined flux in latest and established models = 0.85818 Jy ! Adding 109 model components to the UV plane model. ! The established model now contains 147 components and 0.85818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.71 mas, bmaj=56.58 mas, bpa=2.579 degrees ! Estimated noise=8888.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942963 Jy ! Component: 100 - total flux cleaned = 0.015879 Jy ! Component: 150 - total flux cleaned = 0.0158945 Jy ! Component: 200 - total flux cleaned = 0.0137253 Jy ! Total flux subtracted in 200 components = 0.0137253 Jy ! Clean residual min=-0.002550 max=0.002556 Jy/beam ! Clean residual mean=-0.000067 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.871905 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195874 Jy ! Component: 100 - total flux cleaned = -0.00318503 Jy ! Component: 150 - total flux cleaned = -0.00415478 Jy ! Component: 200 - total flux cleaned = -0.00518157 Jy ! Total flux subtracted in 200 components = -0.00518157 Jy ! Clean residual min=-0.003099 max=0.002945 Jy/beam ! Clean residual mean=-0.000245 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.866723 Jy ! Adding 163 model components to the UV plane model. ! The established model now contains 306 components and 0.866724 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=61.52 mas, bpa=5.645 degrees ! Estimated noise=7128.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000922429 Jy ! Component: 100 - total flux cleaned = 0.000125562 Jy ! Component: 150 - total flux cleaned = 0.000775381 Jy ! Component: 200 - total flux cleaned = 0.00136013 Jy ! Total flux subtracted in 200 components = 0.00136013 Jy ! Clean residual min=-0.001323 max=0.001334 Jy/beam ! Clean residual mean=0.000012 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.868084 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 353 components and 0.868084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078062Jy sigma=0.000486 ! Fit after self-cal, rms=0.078026Jy sigma=0.000486 wmodel J2109-4110_S_2017_07_09_pus_map.mod ! Writing 353 model components to file: J2109-4110_S_2017_07_09_pus_map.mod wobs J2109-4110_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2017_07_09_pus_uvs.fits wwins J2109-4110_S_2017_07_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2109-4110_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 61.52 at 5.645 degrees (North through East) ! Clean map min=-0.0093242 max=0.60204 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.602035 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000510201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.254238 0.254238 0.508477 1.01695 2.03391 4.06781 8.13563 16.2713 32.5425 65.085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.602 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 61.52 at 5.645 degrees (North through East) ! Clean map min=-0.0093242 max=0.60204 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:58:23 2019