! Started logfile: J2109-4110_S_2017_03_23_pus_uvs.log on Mon May 13 10:08:50 2019 obs J2109-4110_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.425 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.535238Jy sigma=0.002958 ! Fit after self-cal, rms=0.493738Jy sigma=0.002697 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=25.97 mas, bpa=7.458 degrees ! Estimated noise=7419.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.460048 Jy ! Component: 100 - total flux cleaned = 0.64524 Jy ! Total flux subtracted in 100 components = 0.64524 Jy ! Clean residual min=-0.055587 max=0.089035 Jy/beam ! Clean residual mean=-0.001103 rms=0.024622 Jy/beam ! Combined flux in latest and established models = 0.64524 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.64524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269335Jy sigma=0.001410 ! Fit after self-cal, rms=0.268718Jy sigma=0.001405 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=28.44 mas, bpa=7.001 degrees ! Estimated noise=6023.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13822 Jy ! Component: 100 - total flux cleaned = 0.211227 Jy ! Component: 150 - total flux cleaned = 0.252838 Jy ! Component: 200 - total flux cleaned = 0.278201 Jy ! Total flux subtracted in 200 components = 0.278201 Jy ! Clean residual min=-0.040479 max=0.054746 Jy/beam ! Clean residual mean=-0.000562 rms=0.014432 Jy/beam ! Combined flux in latest and established models = 0.923441 Jy ! Performing phase self-cal ! Adding 104 model components to the UV plane model. ! The established model now contains 142 components and 0.923441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184704Jy sigma=0.000904 ! Fit after self-cal, rms=0.184454Jy sigma=0.000901 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.01 ! LA 0.96 MK 1.00* NL 1.00* OV 1.04 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 0.97 ! LA 0.94 MK 1.00* NL 1.11 OV 1.08 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00* KP 0.83 ! LA 0.70 MK 1.00* NL 1.18 OV 0.96 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.184454Jy sigma=0.000901 ! Fit after self-cal, rms=0.129319Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=28.9 mas, bpa=7.106 degrees ! Estimated noise=6122.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013659 Jy ! Component: 100 - total flux cleaned = -0.000133602 Jy ! Component: 150 - total flux cleaned = -0.000132352 Jy ! Component: 200 - total flux cleaned = 0.000117019 Jy ! Total flux subtracted in 200 components = 0.000117019 Jy ! Clean residual min=-0.019474 max=0.028074 Jy/beam ! Clean residual mean=0.000055 rms=0.006111 Jy/beam ! Combined flux in latest and established models = 0.923558 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 156 components and 0.923558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127432Jy sigma=0.000652 ! Fit after self-cal, rms=0.127296Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127296Jy sigma=0.000652 ! Fit after self-cal, rms=0.126913Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=28.91 mas, bpa=7.106 degrees ! Estimated noise=6103.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122992 Jy ! Component: 100 - total flux cleaned = -0.00100243 Jy ! Component: 150 - total flux cleaned = -0.00101008 Jy ! Component: 200 - total flux cleaned = -0.00081838 Jy ! Total flux subtracted in 200 components = -0.00081838 Jy ! Clean residual min=-0.018612 max=0.027504 Jy/beam ! Clean residual mean=0.000069 rms=0.005891 Jy/beam ! Combined flux in latest and established models = 0.922739 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 161 components and 0.92274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125819Jy sigma=0.000648 ! Fit after self-cal, rms=0.125685Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-127, 75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022134 Jy ! Component: 100 - total flux cleaned = 0.0243082 Jy ! Component: 150 - total flux cleaned = 0.0255737 Jy ! Component: 200 - total flux cleaned = 0.0268947 Jy ! Total flux subtracted in 200 components = 0.0268947 Jy ! Clean residual min=-0.016407 max=0.016902 Jy/beam ! Clean residual mean=0.000058 rms=0.004307 Jy/beam ! Combined flux in latest and established models = 0.949634 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 188 components and 0.949634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120491Jy sigma=0.000624 ! Fit after self-cal, rms=0.120290Jy sigma=0.000623 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120290Jy sigma=0.000623 ! Fit after self-cal, rms=0.120127Jy sigma=0.000621 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=28.97 mas, bpa=7.094 degrees ! Estimated noise=6082.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335871 Jy ! Component: 100 - total flux cleaned = 0.00272843 Jy ! Component: 150 - total flux cleaned = 0.00235838 Jy ! Component: 200 - total flux cleaned = 0.00203335 Jy ! Total flux subtracted in 200 components = 0.00203335 Jy ! Clean residual min=-0.014670 max=0.015883 Jy/beam ! Clean residual mean=0.000070 rms=0.003890 Jy/beam ! Combined flux in latest and established models = 0.951668 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 196 components and 0.951668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119229Jy sigma=0.000619 ! Fit after self-cal, rms=0.119192Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000899178 Jy ! Component: 100 - total flux cleaned = 0.00119152 Jy ! Component: 150 - total flux cleaned = 0.00119576 Jy ! Component: 200 - total flux cleaned = 0.00145635 Jy ! Total flux subtracted in 200 components = 0.00145635 Jy ! Clean residual min=-0.014251 max=0.015523 Jy/beam ! Clean residual mean=0.000074 rms=0.003785 Jy/beam ! Combined flux in latest and established models = 0.953124 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 203 components and 0.953124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118766Jy sigma=0.000617 ! Fit after self-cal, rms=0.118729Jy sigma=0.000617 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118729Jy sigma=0.000617 ! Fit after self-cal, rms=0.118755Jy sigma=0.000617 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.788 mas, bmaj=38.93 mas, bpa=-4.278 degrees ! Estimated noise=6941.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675278 Jy ! Component: 100 - total flux cleaned = 0.000535789 Jy ! Component: 150 - total flux cleaned = 0.000772122 Jy ! Component: 200 - total flux cleaned = 0.000884075 Jy ! Total flux subtracted in 200 components = 0.000884075 Jy ! Clean residual min=-0.012733 max=0.013409 Jy/beam ! Clean residual mean=0.000129 rms=0.003932 Jy/beam ! Combined flux in latest and established models = 0.954008 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 219 components and 0.954008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118522Jy sigma=0.000616 ! Fit after self-cal, rms=0.118496Jy sigma=0.000616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811296 Jy ! Component: 100 - total flux cleaned = 0.000812296 Jy ! Component: 150 - total flux cleaned = 0.000725949 Jy ! Component: 200 - total flux cleaned = 0.000725377 Jy ! Total flux subtracted in 200 components = 0.000725377 Jy ! Clean residual min=-0.013013 max=0.012730 Jy/beam ! Clean residual mean=0.000133 rms=0.003850 Jy/beam ! Combined flux in latest and established models = 0.954733 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 229 components and 0.954733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118351Jy sigma=0.000616 ! Fit after self-cal, rms=0.118330Jy sigma=0.000616 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.914 mas, bmaj=29.02 mas, bpa=7.1 degrees ! Estimated noise=6069.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.914 x 29.02 at 7.1 degrees (North through East) ! Clean map min=-0.013845 max=0.56519 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118330Jy sigma=0.000616 ! Fit after self-cal, rms=0.110751Jy sigma=0.000558 ! Inverting map and beam ! Estimated beam: bmin=3.921 mas, bmaj=28.95 mas, bpa=7.081 degrees ! Estimated noise=6065.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00247282 Jy ! Component: 100 - total flux cleaned = -0.00272246 Jy ! Component: 150 - total flux cleaned = -0.00272086 Jy ! Component: 200 - total flux cleaned = -0.00261382 Jy ! Total flux subtracted in 200 components = -0.00261382 Jy ! Clean residual min=-0.013923 max=0.014464 Jy/beam ! Clean residual mean=0.000105 rms=0.003473 Jy/beam ! Combined flux in latest and established models = 0.952119 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 246 components and 0.952119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110460Jy sigma=0.000556 ! Fit after self-cal, rms=0.110433Jy sigma=0.000556 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239341 Jy ! Component: 100 - total flux cleaned = -0.000235038 Jy ! Component: 150 - total flux cleaned = -0.000132222 Jy ! Component: 200 - total flux cleaned = 5.86219e-05 Jy ! Total flux subtracted in 200 components = 5.86219e-05 Jy ! Clean residual min=-0.013786 max=0.014425 Jy/beam ! Clean residual mean=0.000105 rms=0.003407 Jy/beam ! Combined flux in latest and established models = 0.952178 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 253 components and 0.952178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110239Jy sigma=0.000555 ! Fit after self-cal, rms=0.110228Jy sigma=0.000555 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110228Jy sigma=0.000555 ! Fit after self-cal, rms=0.110261Jy sigma=0.000555 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=26.98 mas, bpa=7.537 degrees ! Estimated noise=7447.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.457974 Jy ! Component: 100 - total flux cleaned = 0.640672 Jy ! Component: 150 - total flux cleaned = 0.736179 Jy ! Component: 200 - total flux cleaned = 0.795371 Jy ! Total flux subtracted in 200 components = 0.795371 Jy ! Clean residual min=-0.025577 max=0.034833 Jy/beam ! Clean residual mean=-0.000183 rms=0.010164 Jy/beam ! Combined flux in latest and established models = 0.795371 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 80 model components to the UV plane model. ! The established model now contains 80 components and 0.795371 Jy ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=29.02 mas, bpa=7.103 degrees ! Estimated noise=6052.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490107 Jy ! Component: 100 - total flux cleaned = 0.0789739 Jy ! Component: 150 - total flux cleaned = 0.100187 Jy ! Component: 200 - total flux cleaned = 0.113492 Jy ! Total flux subtracted in 200 components = 0.113492 Jy ! Clean residual min=-0.014583 max=0.019832 Jy/beam ! Clean residual mean=0.000024 rms=0.005016 Jy/beam ! Combined flux in latest and established models = 0.908863 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 143 components and 0.908863 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.787 mas, bmaj=38.94 mas, bpa=-4.279 degrees ! Estimated noise=6923.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00944556 Jy ! Component: 100 - total flux cleaned = 0.0171858 Jy ! Component: 150 - total flux cleaned = 0.0237634 Jy ! Component: 200 - total flux cleaned = 0.026361 Jy ! Total flux subtracted in 200 components = 0.026361 Jy ! Clean residual min=-0.012535 max=0.015693 Jy/beam ! Clean residual mean=0.000090 rms=0.004549 Jy/beam ! Combined flux in latest and established models = 0.935224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158073 Jy ! Component: 100 - total flux cleaned = 0.00299215 Jy ! Component: 150 - total flux cleaned = 0.00442389 Jy ! Component: 200 - total flux cleaned = 0.00552838 Jy ! Total flux subtracted in 200 components = 0.00552838 Jy ! Clean residual min=-0.012589 max=0.014564 Jy/beam ! Clean residual mean=0.000121 rms=0.004137 Jy/beam ! Combined flux in latest and established models = 0.940752 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 197 components and 0.940752 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.912 mas, bmaj=29.02 mas, bpa=7.103 degrees ! Estimated noise=6052.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524217 Jy ! Component: 100 - total flux cleaned = 0.00190293 Jy ! Component: 150 - total flux cleaned = 0.00343543 Jy ! Component: 200 - total flux cleaned = 0.00389438 Jy ! Total flux subtracted in 200 components = 0.00389438 Jy ! Clean residual min=-0.013579 max=0.014467 Jy/beam ! Clean residual mean=0.000084 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.944647 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 218 components and 0.944647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110405Jy sigma=0.000556 ! Fit after self-cal, rms=0.110297Jy sigma=0.000556 wmodel J2109-4110_S_2017_03_23_pus_map.mod ! Writing 218 model components to file: J2109-4110_S_2017_03_23_pus_map.mod wobs J2109-4110_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2017_03_23_pus_uvs.fits wwins J2109-4110_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J2109-4110_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235476 Jy ! Component: 100 - total flux cleaned = 0.00422176 Jy ! Component: 150 - total flux cleaned = 0.00503411 Jy ! Component: 200 - total flux cleaned = 0.00601597 Jy ! Component: 250 - total flux cleaned = 0.00796914 Jy ! Component: 300 - total flux cleaned = 0.00931205 Jy ! Component: 350 - total flux cleaned = 0.0104495 Jy ! Component: 400 - total flux cleaned = 0.0116416 Jy ! Component: 450 - total flux cleaned = 0.0127862 Jy ! Component: 500 - total flux cleaned = 0.0136857 Jy ! Component: 550 - total flux cleaned = 0.0148404 Jy ! Component: 600 - total flux cleaned = 0.0156744 Jy ! Component: 650 - total flux cleaned = 0.0161265 Jy ! Component: 700 - total flux cleaned = 0.0164758 Jy ! Component: 750 - total flux cleaned = 0.0166478 Jy ! Component: 800 - total flux cleaned = 0.0164808 Jy ! Component: 850 - total flux cleaned = 0.0166461 Jy ! Component: 900 - total flux cleaned = 0.0166457 Jy ! Component: 950 - total flux cleaned = 0.0166456 Jy ! Component: 1000 - total flux cleaned = 0.0167221 Jy ! Component: 1050 - total flux cleaned = 0.0164941 Jy ! Component: 1100 - total flux cleaned = 0.016795 Jy ! Component: 1150 - total flux cleaned = 0.0170155 Jy ! Component: 1200 - total flux cleaned = 0.0171602 Jy ! Component: 1250 - total flux cleaned = 0.0171604 Jy ! Component: 1300 - total flux cleaned = 0.0170171 Jy ! Component: 1350 - total flux cleaned = 0.0169457 Jy ! Component: 1400 - total flux cleaned = 0.0168741 Jy ! Component: 1450 - total flux cleaned = 0.0166605 Jy ! Component: 1500 - total flux cleaned = 0.016374 Jy ! Component: 1550 - total flux cleaned = 0.0160855 Jy ! Component: 1600 - total flux cleaned = 0.0157235 Jy ! Component: 1650 - total flux cleaned = 0.0154316 Jy ! Component: 1700 - total flux cleaned = 0.0150631 Jy ! Component: 1750 - total flux cleaned = 0.0146914 Jy ! Component: 1800 - total flux cleaned = 0.0142394 Jy ! Component: 1850 - total flux cleaned = 0.0140095 Jy ! Component: 1900 - total flux cleaned = 0.0136988 Jy ! Component: 1950 - total flux cleaned = 0.0136991 Jy ! Component: 2000 - total flux cleaned = 0.0135374 Jy ! Component: 2050 - total flux cleaned = 0.0133704 Jy ! Component: 2100 - total flux cleaned = 0.01337 Jy ! Component: 2150 - total flux cleaned = 0.0132827 Jy ! Component: 2200 - total flux cleaned = 0.0130997 Jy ! Component: 2250 - total flux cleaned = 0.0131928 Jy ! Component: 2300 - total flux cleaned = 0.0130968 Jy ! Component: 2350 - total flux cleaned = 0.0131947 Jy ! Component: 2400 - total flux cleaned = 0.0131955 Jy ! Component: 2450 - total flux cleaned = 0.0132989 Jy ! Component: 2500 - total flux cleaned = 0.013301 Jy ! Component: 2550 - total flux cleaned = 0.013301 Jy ! Component: 2600 - total flux cleaned = 0.0133011 Jy ! Component: 2650 - total flux cleaned = 0.0134196 Jy ! Component: 2700 - total flux cleaned = 0.0134212 Jy ! Component: 2750 - total flux cleaned = 0.0134207 Jy ! Component: 2800 - total flux cleaned = 0.0134203 Jy ! Component: 2850 - total flux cleaned = 0.0135543 Jy ! Component: 2900 - total flux cleaned = 0.0136959 Jy ! Component: 2950 - total flux cleaned = 0.0136967 Jy ! Component: 3000 - total flux cleaned = 0.0136976 Jy ! Component: 3050 - total flux cleaned = 0.0138472 Jy ! Component: 3100 - total flux cleaned = 0.0141601 Jy ! Component: 3150 - total flux cleaned = 0.0143217 Jy ! Component: 3200 - total flux cleaned = 0.0144896 Jy ! Component: 3250 - total flux cleaned = 0.0146654 Jy ! Component: 3300 - total flux cleaned = 0.014846 Jy ! Component: 3350 - total flux cleaned = 0.0150295 Jy ! Component: 3400 - total flux cleaned = 0.015225 Jy ! Component: 3450 - total flux cleaned = 0.0152277 Jy ! Component: 3500 - total flux cleaned = 0.015638 Jy ! Component: 3550 - total flux cleaned = 0.0156408 Jy ! Component: 3600 - total flux cleaned = 0.0156384 Jy ! Component: 3650 - total flux cleaned = 0.0160865 Jy ! Component: 3700 - total flux cleaned = 0.0163231 Jy ! Component: 3750 - total flux cleaned = 0.0163267 Jy ! Component: 3800 - total flux cleaned = 0.0165727 Jy ! Component: 3850 - total flux cleaned = 0.0168322 Jy ! Component: 3900 - total flux cleaned = 0.017099 Jy ! Component: 3950 - total flux cleaned = 0.0171014 Jy ! Component: 4000 - total flux cleaned = 0.0173806 Jy ! Component: 4050 - total flux cleaned = 0.0176749 Jy ! Total flux subtracted in 4096 components = 0.017981 Jy ! Clean residual min=-0.016336 max=0.017330 Jy/beam ! Clean residual mean=-0.000302 rms=0.004735 Jy/beam ! Combined flux in latest and established models = 0.962628 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 445 components and 0.962627 Jy ![Exited script file: muppet] wmap "J2109-4110_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 29.02 at 7.103 degrees (North through East) ! Clean map min=-0.035146 max=0.57514 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.575143 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00544741 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.84142 2.84142 5.68284 11.3657 22.7314 45.4627 90.9255 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0163 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.575 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.912 x 29.02 at 7.103 degrees (North through East) ! Clean map min=-0.035146 max=0.57514 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:08:55 2019