! Started logfile: J2109-4110_S_2017_02_19_pus_uvs.log on Sat May 4 18:58:51 2019 obs J2109-4110_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.308333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.542264Jy sigma=0.002764 ! Fit after self-cal, rms=0.534637Jy sigma=0.002728 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=23.01 mas, bpa=7.909 degrees ! Estimated noise=10258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.424802 Jy ! Component: 100 - total flux cleaned = 0.596199 Jy ! Total flux subtracted in 100 components = 0.596199 Jy ! Clean residual min=-0.061664 max=0.078727 Jy/beam ! Clean residual mean=-0.001431 rms=0.024354 Jy/beam ! Combined flux in latest and established models = 0.596199 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.596199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250298Jy sigma=0.001214 ! Fit after self-cal, rms=0.249467Jy sigma=0.001210 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=23.28 mas, bpa=7.608 degrees ! Estimated noise=7950.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127227 Jy ! Component: 100 - total flux cleaned = 0.195126 Jy ! Component: 150 - total flux cleaned = 0.23831 Jy ! Component: 200 - total flux cleaned = 0.255579 Jy ! Total flux subtracted in 200 components = 0.255579 Jy ! Clean residual min=-0.025691 max=0.025637 Jy/beam ! Clean residual mean=-0.000417 rms=0.011067 Jy/beam ! Combined flux in latest and established models = 0.851777 Jy ! Performing phase self-cal ! Adding 95 model components to the UV plane model. ! The established model now contains 124 components and 0.851777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159728Jy sigma=0.000727 ! Fit after self-cal, rms=0.159300Jy sigma=0.000723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.01 ! LA 1.06 MK 1.00* NL 0.98 OV 0.99 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.96 ! LA 0.99 MK 1.00* NL 1.08 OV 1.00 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 0.87 ! LA 0.79 MK 1.00* NL 1.08 OV 1.00* ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.159300Jy sigma=0.000723 ! Fit after self-cal, rms=0.129098Jy sigma=0.000613 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=23.28 mas, bpa=7.681 degrees ! Estimated noise=8012.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744544 Jy ! Component: 100 - total flux cleaned = 0.007747 Jy ! Component: 150 - total flux cleaned = 0.00742076 Jy ! Component: 200 - total flux cleaned = 0.00691544 Jy ! Total flux subtracted in 200 components = 0.00691544 Jy ! Clean residual min=-0.004215 max=0.004211 Jy/beam ! Clean residual mean=-0.000073 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 0.858693 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 173 components and 0.858692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126936Jy sigma=0.000602 ! Fit after self-cal, rms=0.126855Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126855Jy sigma=0.000601 ! Fit after self-cal, rms=0.126721Jy sigma=0.000601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=23.28 mas, bpa=7.68 degrees ! Estimated noise=8005.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000673589 Jy ! Component: 100 - total flux cleaned = -0.000115317 Jy ! Component: 150 - total flux cleaned = -0.000266349 Jy ! Component: 200 - total flux cleaned = -0.00055157 Jy ! Total flux subtracted in 200 components = -0.00055157 Jy ! Clean residual min=-0.002271 max=0.002261 Jy/beam ! Clean residual mean=-0.000036 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.858141 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 225 components and 0.858141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126224Jy sigma=0.000598 ! Fit after self-cal, rms=0.126229Jy sigma=0.000598 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000846599 Jy ! Component: 100 - total flux cleaned = -0.000962002 Jy ! Component: 150 - total flux cleaned = -0.000856361 Jy ! Component: 200 - total flux cleaned = -0.000459619 Jy ! Total flux subtracted in 200 components = -0.000459619 Jy ! Clean residual min=-0.001591 max=0.001609 Jy/beam ! Clean residual mean=-0.000018 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.857681 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 267 components and 0.857681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126034Jy sigma=0.000597 ! Fit after self-cal, rms=0.126040Jy sigma=0.000597 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126040Jy sigma=0.000597 ! Fit after self-cal, rms=0.126151Jy sigma=0.000597 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=23.28 mas, bpa=7.673 degrees ! Estimated noise=8012.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.52394e-05 Jy ! Component: 100 - total flux cleaned = 0.00038369 Jy ! Component: 150 - total flux cleaned = 0.0005499 Jy ! Component: 200 - total flux cleaned = 0.000709704 Jy ! Total flux subtracted in 200 components = 0.000709704 Jy ! Clean residual min=-0.001316 max=0.001300 Jy/beam ! Clean residual mean=-0.000013 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.858391 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 301 components and 0.858391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126031Jy sigma=0.000596 ! Fit after self-cal, rms=0.126036Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319792 Jy ! Component: 100 - total flux cleaned = -0.000249553 Jy ! Component: 150 - total flux cleaned = -4.49892e-05 Jy ! Component: 200 - total flux cleaned = 0.000150537 Jy ! Total flux subtracted in 200 components = 0.000150537 Jy ! Clean residual min=-0.001074 max=0.001080 Jy/beam ! Clean residual mean=-0.000007 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.858541 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 327 components and 0.858541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125956Jy sigma=0.000596 ! Fit after self-cal, rms=0.125962Jy sigma=0.000596 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125962Jy sigma=0.000596 ! Fit after self-cal, rms=0.125995Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.862 mas, bmaj=28.61 mas, bpa=-2.958 degrees ! Estimated noise=9674.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.44558e-05 Jy ! Component: 100 - total flux cleaned = -0.000330544 Jy ! Component: 150 - total flux cleaned = -0.000777426 Jy ! Component: 200 - total flux cleaned = -0.0013452 Jy ! Total flux subtracted in 200 components = -0.0013452 Jy ! Clean residual min=-0.001412 max=0.001402 Jy/beam ! Clean residual mean=0.000004 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.857196 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 361 components and 0.857196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125958Jy sigma=0.000596 ! Fit after self-cal, rms=0.125951Jy sigma=0.000596 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132902 Jy ! Component: 100 - total flux cleaned = 0.00209676 Jy ! Component: 150 - total flux cleaned = 0.00234754 Jy ! Component: 200 - total flux cleaned = 0.00239738 Jy ! Total flux subtracted in 200 components = 0.00239738 Jy ! Clean residual min=-0.000798 max=0.000815 Jy/beam ! Clean residual mean=-0.000008 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.859593 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 406 components and 0.859593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125900Jy sigma=0.000596 ! Fit after self-cal, rms=0.125902Jy sigma=0.000596 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=23.28 mas, bpa=7.674 degrees ! Estimated noise=8012.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 23.28 at 7.674 degrees (North through East) ! Clean map min=-0.0080573 max=0.48073 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=23.44 mas, bpa=7.822 degrees ! Estimated noise=10367.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.414013 Jy ! Component: 100 - total flux cleaned = 0.5799 Jy ! Component: 150 - total flux cleaned = 0.666609 Jy ! Component: 200 - total flux cleaned = 0.712844 Jy ! Total flux subtracted in 200 components = 0.712844 Jy ! Clean residual min=-0.029178 max=0.029921 Jy/beam ! Clean residual mean=-0.000500 rms=0.011330 Jy/beam ! Combined flux in latest and established models = 0.712844 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 72 model components to the UV plane model. ! The established model now contains 72 components and 0.712844 Jy ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=23.28 mas, bpa=7.674 degrees ! Estimated noise=8012.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565315 Jy ! Component: 100 - total flux cleaned = 0.0890705 Jy ! Component: 150 - total flux cleaned = 0.101475 Jy ! Component: 200 - total flux cleaned = 0.101707 Jy ! Total flux subtracted in 200 components = 0.101707 Jy ! Clean residual min=-0.013764 max=0.013735 Jy/beam ! Clean residual mean=-0.000317 rms=0.005620 Jy/beam ! Combined flux in latest and established models = 0.814551 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 128 components and 0.814552 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.862 mas, bmaj=28.61 mas, bpa=-2.958 degrees ! Estimated noise=9674.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203262 Jy ! Component: 100 - total flux cleaned = 0.0283692 Jy ! Component: 150 - total flux cleaned = 0.0272047 Jy ! Component: 200 - total flux cleaned = 0.0245772 Jy ! Total flux subtracted in 200 components = 0.0245772 Jy ! Clean residual min=-0.004387 max=0.004372 Jy/beam ! Clean residual mean=-0.000122 rms=0.002187 Jy/beam ! Combined flux in latest and established models = 0.839129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126147 Jy ! Component: 100 - total flux cleaned = -0.0022117 Jy ! Component: 150 - total flux cleaned = -0.00290935 Jy ! Component: 200 - total flux cleaned = -0.00360508 Jy ! Total flux subtracted in 200 components = -0.00360508 Jy ! Clean residual min=-0.003945 max=0.003928 Jy/beam ! Clean residual mean=-0.000042 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.835524 Jy ! Adding 151 model components to the UV plane model. ! The established model now contains 277 components and 0.835523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.569 mas, bmaj=23.28 mas, bpa=7.674 degrees ! Estimated noise=8012.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371818 Jy ! Component: 100 - total flux cleaned = -5.47158e-05 Jy ! Component: 150 - total flux cleaned = 0.000255614 Jy ! Component: 200 - total flux cleaned = 0.00011342 Jy ! Total flux subtracted in 200 components = 0.00011342 Jy ! Clean residual min=-0.002382 max=0.002374 Jy/beam ! Clean residual mean=-0.000009 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.835637 Jy selfcal ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 327 components and 0.835637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126309Jy sigma=0.000598 ! Fit after self-cal, rms=0.126216Jy sigma=0.000597 wmodel J2109-4110_S_2017_02_19_pus_map.mod ! Writing 327 model components to file: J2109-4110_S_2017_02_19_pus_map.mod wobs J2109-4110_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2017_02_19_pus_uvs.fits wwins J2109-4110_S_2017_02_19_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2109-4110_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 23.28 at 7.674 degrees (North through East) ! Clean map min=-0.014055 max=0.47882 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.47882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000818642 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.512912 0.512912 1.02582 2.05165 4.10329 8.20659 16.4132 32.8264 65.6527 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.478 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.569 x 23.28 at 7.674 degrees (North through East) ! Clean map min=-0.014055 max=0.47882 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:58:54 2019