! Started logfile: J2109-4110_S_2017_01_21_pus_uvs.log on Sun May 5 16:03:17 2019 obs J2109-4110_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2109-4110_S_2017_01_21_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.149306 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2109-4110 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2109-4110_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819180Jy sigma=0.003328 ! Fit after self-cal, rms=0.728657Jy sigma=0.003132 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=31.61 mas, bpa=-11.36 degrees ! Estimated noise=11821.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20962 Jy ! Component: 100 - total flux cleaned = 0.231875 Jy ! Total flux subtracted in 100 components = 0.231875 Jy ! Clean residual min=-0.054338 max=0.054240 Jy/beam ! Clean residual mean=-0.006126 rms=0.033425 Jy/beam ! Combined flux in latest and established models = 0.231875 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.231875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298827Jy sigma=0.001625 ! Fit after self-cal, rms=0.298445Jy sigma=0.001623 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=33.44 mas, bpa=-10.69 degrees ! Estimated noise=9386.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187003 Jy ! Component: 100 - total flux cleaned = -0.107879 Jy ! Component: 150 - total flux cleaned = -0.203882 Jy ! Component: 200 - total flux cleaned = -0.277331 Jy ! Total flux subtracted in 200 components = -0.277331 Jy ! Clean residual min=-0.042858 max=0.040949 Jy/beam ! Clean residual mean=-0.007193 rms=0.027695 Jy/beam ! Combined flux in latest and established models = -0.0454559 Jy ! Performing phase self-cal ! Adding 170 model components to the UV plane model. ! The established model now contains 206 components and -0.0454558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175851Jy sigma=0.000729 ! Fit after self-cal, rms=0.174953Jy sigma=0.000724 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.99 ! MK 1.20 NL 1.00* OV 1.00 PT 0.84 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.87 ! MK 1.02 NL 1.00* OV 1.24 PT 0.91 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* LA 0.94 ! MK 1.16 NL 1.00* OV 1.06 PT 0.84 ! SC 1.00* ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.174953Jy sigma=0.000724 ! Fit after self-cal, rms=0.172121Jy sigma=0.000583 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=35.69 mas, bpa=-10.41 degrees ! Estimated noise=9494.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017604 Jy ! Component: 100 - total flux cleaned = 0.00192923 Jy ! Component: 150 - total flux cleaned = 0.00305082 Jy ! Component: 200 - total flux cleaned = 0.0035411 Jy ! Total flux subtracted in 200 components = 0.0035411 Jy ! Clean residual min=-0.003873 max=0.003840 Jy/beam ! Clean residual mean=-0.000248 rms=0.001328 Jy/beam ! Combined flux in latest and established models = -0.0419147 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 241 components and -0.0419147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170658Jy sigma=0.000577 ! Fit after self-cal, rms=0.171431Jy sigma=0.000576 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171431Jy sigma=0.000576 ! Fit after self-cal, rms=0.168410Jy sigma=0.000576 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.91 mas, bmaj=35.59 mas, bpa=-10.41 degrees ! Estimated noise=9412.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251181 Jy ! Component: 100 - total flux cleaned = 0.00381841 Jy ! Component: 150 - total flux cleaned = 0.00341613 Jy ! Component: 200 - total flux cleaned = 0.00342275 Jy ! Total flux subtracted in 200 components = 0.00342275 Jy ! Clean residual min=-0.003076 max=0.003122 Jy/beam ! Clean residual mean=-0.000234 rms=0.001071 Jy/beam ! Combined flux in latest and established models = -0.038492 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 273 components and -0.038492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167776Jy sigma=0.000573 ! Fit after self-cal, rms=0.167638Jy sigma=0.000573 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162693 Jy ! Component: 100 - total flux cleaned = 0.00180486 Jy ! Component: 150 - total flux cleaned = 0.00181201 Jy ! Component: 200 - total flux cleaned = 0.00134073 Jy ! Total flux subtracted in 200 components = 0.00134073 Jy ! Clean residual min=-0.002563 max=0.002572 Jy/beam ! Clean residual mean=-0.000212 rms=0.000910 Jy/beam ! Combined flux in latest and established models = -0.0371512 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 305 components and -0.0371512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167205Jy sigma=0.000571 ! Fit after self-cal, rms=0.167055Jy sigma=0.000571 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167055Jy sigma=0.000571 ! Fit after self-cal, rms=0.164427Jy sigma=0.000564 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=35.5 mas, bpa=-10.43 degrees ! Estimated noise=9337.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412537 Jy ! Component: 100 - total flux cleaned = 0.00157448 Jy ! Component: 150 - total flux cleaned = 0.00262795 Jy ! Component: 200 - total flux cleaned = 0.00319322 Jy ! Total flux subtracted in 200 components = 0.00319322 Jy ! Clean residual min=-0.002358 max=0.002370 Jy/beam ! Clean residual mean=0.000017 rms=0.000783 Jy/beam ! Combined flux in latest and established models = -0.033958 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 342 components and -0.033958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164013Jy sigma=0.000562 ! Fit after self-cal, rms=0.163944Jy sigma=0.000562 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000607614 Jy ! Component: 100 - total flux cleaned = 0.00086377 Jy ! Component: 150 - total flux cleaned = 0.000992208 Jy ! Component: 200 - total flux cleaned = 0.00149563 Jy ! Total flux subtracted in 200 components = 0.00149563 Jy ! Clean residual min=-0.002117 max=0.002107 Jy/beam ! Clean residual mean=0.000010 rms=0.000681 Jy/beam ! Combined flux in latest and established models = -0.0324624 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 375 components and -0.0324624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163668Jy sigma=0.000561 ! Fit after self-cal, rms=0.163620Jy sigma=0.000561 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163620Jy sigma=0.000561 ! Fit after self-cal, rms=0.161366Jy sigma=0.000561 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.264 mas, bmaj=41.55 mas, bpa=-2.694 degrees ! Estimated noise=12569.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92649e-05 Jy ! Component: 100 - total flux cleaned = 0.000275357 Jy ! Component: 150 - total flux cleaned = 0.000795017 Jy ! Component: 200 - total flux cleaned = 0.0012089 Jy ! Total flux subtracted in 200 components = 0.0012089 Jy ! Clean residual min=-0.001106 max=0.001114 Jy/beam ! Clean residual mean=-0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = -0.0312535 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 414 components and -0.0312535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161230Jy sigma=0.000560 ! Fit after self-cal, rms=0.161157Jy sigma=0.000560 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116818 Jy ! Component: 100 - total flux cleaned = 9.05964e-05 Jy ! Component: 150 - total flux cleaned = 0.000346036 Jy ! Component: 200 - total flux cleaned = 0.000645791 Jy ! Total flux subtracted in 200 components = 0.000645791 Jy ! Clean residual min=-0.000984 max=0.000976 Jy/beam ! Clean residual mean=-0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = -0.0306077 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 433 components and -0.0306077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161059Jy sigma=0.000560 ! Fit after self-cal, rms=0.161002Jy sigma=0.000560 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=35.41 mas, bpa=-10.43 degrees ! Estimated noise=9272.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 35.41 at -10.43 degrees (North through East) ! Clean map min=-0.05427 max=0.22763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=33.01 mas, bpa=-10.97 degrees ! Estimated noise=12001.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.208229 Jy ! Component: 100 - total flux cleaned = 0.23024 Jy ! Component: 150 - total flux cleaned = 0.244377 Jy ! Component: 200 - total flux cleaned = 0.221961 Jy ! Total flux subtracted in 200 components = 0.221961 Jy ! Clean residual min=-0.034888 max=0.034735 Jy/beam ! Clean residual mean=-0.004378 rms=0.022467 Jy/beam ! Combined flux in latest and established models = 0.221961 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 85 model components to the UV plane model. ! The established model now contains 85 components and 0.221961 Jy ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=35.41 mas, bpa=-10.43 degrees ! Estimated noise=9272.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000650996 Jy ! Component: 100 - total flux cleaned = -0.0766757 Jy ! Component: 150 - total flux cleaned = -0.129688 Jy ! Component: 200 - total flux cleaned = -0.167048 Jy ! Total flux subtracted in 200 components = -0.167048 Jy ! Clean residual min=-0.020910 max=0.018660 Jy/beam ! Clean residual mean=-0.003912 rms=0.012568 Jy/beam ! Combined flux in latest and established models = 0.0549131 Jy ! Adding 156 model components to the UV plane model. ! The established model now contains 240 components and 0.0549131 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.264 mas, bmaj=41.55 mas, bpa=-2.694 degrees ! Estimated noise=12569.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200745 Jy ! Component: 100 - total flux cleaned = 0.00333265 Jy ! Component: 150 - total flux cleaned = 0.0015395 Jy ! Component: 200 - total flux cleaned = -0.00652201 Jy ! Total flux subtracted in 200 components = -0.00652201 Jy ! Clean residual min=-0.010560 max=0.010249 Jy/beam ! Clean residual mean=-0.001098 rms=0.003901 Jy/beam ! Combined flux in latest and established models = 0.0483911 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0163072 Jy ! Component: 100 - total flux cleaned = -0.0396244 Jy ! Component: 150 - total flux cleaned = -0.0742447 Jy ! Component: 200 - total flux cleaned = -0.121864 Jy ! Total flux subtracted in 200 components = -0.121864 Jy ! Clean residual min=-0.037569 max=0.034968 Jy/beam ! Clean residual mean=-0.001603 rms=0.010317 Jy/beam ! Combined flux in latest and established models = -0.0734725 Jy ! Adding 171 model components to the UV plane model. ! The established model now contains 410 components and -0.0734726 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=35.41 mas, bpa=-10.43 degrees ! Estimated noise=9272.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00319361 Jy ! Component: 100 - total flux cleaned = -0.0024809 Jy ! Component: 150 - total flux cleaned = -0.00179014 Jy ! Component: 200 - total flux cleaned = -0.00213361 Jy ! Total flux subtracted in 200 components = -0.00213361 Jy ! Clean residual min=-0.005814 max=0.005806 Jy/beam ! Clean residual mean=0.000008 rms=0.001699 Jy/beam ! Combined flux in latest and established models = -0.0756062 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 441 components and -0.0756062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160795Jy sigma=0.000561 ! Fit after self-cal, rms=0.160408Jy sigma=0.000560 wmodel J2109-4110_S_2017_01_21_pus_map.mod ! Writing 441 model components to file: J2109-4110_S_2017_01_21_pus_map.mod wobs J2109-4110_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2109-4110_S_2017_01_21_pus_uvs.fits wwins J2109-4110_S_2017_01_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2109-4110_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 35.41 at -10.43 degrees (North through East) ! Clean map min=-0.041381 max=0.2191 Jy/beam ! Writing clean map to FITS file: J2109-4110_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.219104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0012134 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.6614 1.6614 3.3228 6.6456 13.2912 26.5824 53.1648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.219 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.907 x 35.41 at -10.43 degrees (North through East) ! Clean map min=-0.041381 max=0.2191 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2109-4110_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:03:21 2019