! Started logfile: J2108-2911_S_2017_04_28_pus_uvs.log on Thu May 2 16:33:58 2019 obs J2108-2911_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2108-2911_S_2017_04_28_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972164 visibilities/baseline/integration-bin. ! Found source: J2108-2911 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 16624 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2108-2911_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 399 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.913002Jy sigma=0.012837 ! Fit after self-cal, rms=0.894314Jy sigma=0.012768 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.653 mas, bmaj=7.296 mas, bpa=-7.916 degrees ! Estimated noise=1195.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737536 Jy ! Component: 100 - total flux cleaned = 0.0869853 Jy ! Total flux subtracted in 100 components = 0.0869853 Jy ! Clean residual min=-0.018397 max=0.018414 Jy/beam ! Clean residual mean=0.000030 rms=0.005529 Jy/beam ! Combined flux in latest and established models = 0.0869853 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0869853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127379Jy sigma=0.001173 ! Fit after self-cal, rms=0.127265Jy sigma=0.001172 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=8.556 mas, bpa=-6.585 degrees ! Estimated noise=835.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669572 Jy ! Component: 100 - total flux cleaned = 0.00618233 Jy ! Component: 150 - total flux cleaned = 0.00590608 Jy ! Component: 200 - total flux cleaned = 0.00532975 Jy ! Total flux subtracted in 200 components = 0.00532975 Jy ! Clean residual min=-0.014469 max=0.014740 Jy/beam ! Clean residual mean=0.000351 rms=0.004857 Jy/beam ! Combined flux in latest and established models = 0.092315 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.092315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125761Jy sigma=0.001225 ! Fit after self-cal, rms=0.125720Jy sigma=0.001225 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.88 HN 1.05 KP 0.89 ! LA 0.93 MK 0.96 NL 0.80 OV 0.89 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.80 HN 1.09 KP 0.85 ! LA 0.93 MK 0.94 NL 1.01 OV 0.89 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.84 HN 1.06 KP 0.91 ! LA 0.83 MK 0.98 NL 0.91 OV 0.84 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.03 KP 1.00* ! LA 13.50 MK 1.06 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.125720Jy sigma=0.001225 ! Fit after self-cal, rms=0.433761Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=8.202 mas, bpa=-5.094 degrees ! Estimated noise=835.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221355 Jy ! Component: 100 - total flux cleaned = 0.00246647 Jy ! Component: 150 - total flux cleaned = 0.00262189 Jy ! Component: 200 - total flux cleaned = 0.00270161 Jy ! Total flux subtracted in 200 components = 0.00270161 Jy ! Clean residual min=-0.003251 max=0.003507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.0950166 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.0950166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433587Jy sigma=0.000680 ! Fit after self-cal, rms=0.434532Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434532Jy sigma=0.000675 ! Fit after self-cal, rms=0.597542Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=8.165 mas, bpa=-5.097 degrees ! Estimated noise=842.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186754 Jy ! Component: 100 - total flux cleaned = 0.00279672 Jy ! Component: 150 - total flux cleaned = 0.0030122 Jy ! Component: 200 - total flux cleaned = 0.00309395 Jy ! Total flux subtracted in 200 components = 0.00309395 Jy ! Clean residual min=-0.002832 max=0.002503 Jy/beam ! Clean residual mean=-0.000008 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0981106 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.0981106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.597380Jy sigma=0.000673 ! Fit after self-cal, rms=0.597463Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.36821e-07 Jy ! Component: 100 - total flux cleaned = 3.6891e-05 Jy ! Component: 150 - total flux cleaned = 7.30754e-05 Jy ! Component: 200 - total flux cleaned = 0.000106777 Jy ! Total flux subtracted in 200 components = 0.000106777 Jy ! Clean residual min=-0.002786 max=0.002542 Jy/beam ! Clean residual mean=-0.000008 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.0982174 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0982174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.597453Jy sigma=0.000673 ! Fit after self-cal, rms=0.597453Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.597453Jy sigma=0.000673 ! Fit after self-cal, rms=0.168577Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=8.154 mas, bpa=-5.1 degrees ! Estimated noise=844.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000472684 Jy ! Component: 100 - total flux cleaned = 0.000530043 Jy ! Component: 150 - total flux cleaned = 0.00056571 Jy ! Component: 200 - total flux cleaned = 0.000582583 Jy ! Total flux subtracted in 200 components = 0.000582583 Jy ! Clean residual min=-0.002296 max=0.002081 Jy/beam ! Clean residual mean=-0.000012 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0988 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168563Jy sigma=0.000668 ! Fit after self-cal, rms=0.168476Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121438 Jy ! Component: 100 - total flux cleaned = 0.000138251 Jy ! Component: 150 - total flux cleaned = 0.000154486 Jy ! Component: 200 - total flux cleaned = 0.000154482 Jy ! Total flux subtracted in 200 components = 0.000154482 Jy ! Clean residual min=-0.002316 max=0.002042 Jy/beam ! Clean residual mean=-0.000011 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0989544 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0989544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168469Jy sigma=0.000667 ! Fit after self-cal, rms=0.168468Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168468Jy sigma=0.000667 ! Fit after self-cal, rms=0.169816Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.982 mas, bmaj=20.4 mas, bpa=1.417 degrees ! Estimated noise=1033.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000425204 Jy ! Component: 100 - total flux cleaned = 0.000426539 Jy ! Component: 150 - total flux cleaned = 0.000427016 Jy ! Component: 200 - total flux cleaned = 0.000437124 Jy ! Total flux subtracted in 200 components = 0.000437124 Jy ! Clean residual min=-0.002008 max=0.002033 Jy/beam ! Clean residual mean=-0.000023 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0993916 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 44 components and 0.0993916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169809Jy sigma=0.000667 ! Fit after self-cal, rms=0.169804Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.22593e-06 Jy ! Component: 100 - total flux cleaned = -5.20973e-06 Jy ! Component: 150 - total flux cleaned = -4.70527e-06 Jy ! Component: 200 - total flux cleaned = -4.27299e-06 Jy ! Total flux subtracted in 200 components = -4.27299e-06 Jy ! Clean residual min=-0.002016 max=0.002022 Jy/beam ! Clean residual mean=-0.000023 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0993873 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.0993873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169801Jy sigma=0.000667 ! Fit after self-cal, rms=0.169802Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.145 mas, bpa=-5.094 degrees ! Estimated noise=846.273 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.145 at -5.094 degrees (North through East) ! Clean map min=-0.0021835 max=0.1003 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=6.817 mas, bpa=-6.366 degrees ! Estimated noise=1258.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783812 Jy ! Component: 100 - total flux cleaned = 0.0955227 Jy ! Component: 150 - total flux cleaned = 0.0984303 Jy ! Component: 200 - total flux cleaned = 0.0989635 Jy ! Total flux subtracted in 200 components = 0.0989635 Jy ! Clean residual min=-0.003321 max=0.003740 Jy/beam ! Clean residual mean=-0.000010 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0989635 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0989635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.145 mas, bpa=-5.094 degrees ! Estimated noise=846.273 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129315 Jy ! Component: 100 - total flux cleaned = 0.000221171 Jy ! Component: 150 - total flux cleaned = 0.000338119 Jy ! Component: 200 - total flux cleaned = 0.000402404 Jy ! Total flux subtracted in 200 components = 0.000402404 Jy ! Clean residual min=-0.002351 max=0.002108 Jy/beam ! Clean residual mean=-0.000012 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0993659 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.0993659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.982 mas, bmaj=20.4 mas, bpa=1.417 degrees ! Estimated noise=1033.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.41561e-05 Jy ! Component: 100 - total flux cleaned = 6.48916e-05 Jy ! Component: 150 - total flux cleaned = 6.58692e-05 Jy ! Component: 200 - total flux cleaned = 6.635e-05 Jy ! Total flux subtracted in 200 components = 6.635e-05 Jy ! Clean residual min=-0.002038 max=0.002048 Jy/beam ! Clean residual mean=-0.000023 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0994323 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55464e-08 Jy ! Component: 100 - total flux cleaned = -1.00451e-05 Jy ! Component: 150 - total flux cleaned = -2.81283e-05 Jy ! Component: 200 - total flux cleaned = -3.69579e-05 Jy ! Total flux subtracted in 200 components = -3.69579e-05 Jy ! Clean residual min=-0.002034 max=0.002047 Jy/beam ! Clean residual mean=-0.000023 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0993953 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0993953 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=8.145 mas, bpa=-5.094 degrees ! Estimated noise=846.273 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19167e-05 Jy ! Component: 100 - total flux cleaned = 9.45941e-06 Jy ! Component: 150 - total flux cleaned = 5.53135e-05 Jy ! Component: 200 - total flux cleaned = 9.65459e-05 Jy ! Total flux subtracted in 200 components = 9.65459e-05 Jy ! Clean residual min=-0.002357 max=0.002100 Jy/beam ! Clean residual mean=-0.000011 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0994919 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.0994919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169798Jy sigma=0.000667 ! Fit after self-cal, rms=0.169801Jy sigma=0.000667 wmodel J2108-2911_S_2017_04_28_pus_map.mod ! Writing 27 model components to file: J2108-2911_S_2017_04_28_pus_map.mod wobs J2108-2911_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2108-2911_S_2017_04_28_pus_uvs.fits wwins J2108-2911_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J2108-2911_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103667 Jy ! Component: 100 - total flux cleaned = -0.00119625 Jy ! Component: 150 - total flux cleaned = -0.00126882 Jy ! Component: 200 - total flux cleaned = -0.00137343 Jy ! Component: 250 - total flux cleaned = -0.00147451 Jy ! Component: 300 - total flux cleaned = -0.00147488 Jy ! Component: 350 - total flux cleaned = -0.0016337 Jy ! Component: 400 - total flux cleaned = -0.00172649 Jy ! Component: 450 - total flux cleaned = -0.00178692 Jy ! Component: 500 - total flux cleaned = -0.00187669 Jy ! Component: 550 - total flux cleaned = -0.00193537 Jy ! Component: 600 - total flux cleaned = -0.00207761 Jy ! Component: 650 - total flux cleaned = -0.00216054 Jy ! Component: 700 - total flux cleaned = -0.00207785 Jy ! Component: 750 - total flux cleaned = -0.00202413 Jy ! Component: 800 - total flux cleaned = -0.00199763 Jy ! Component: 850 - total flux cleaned = -0.00202312 Jy ! Component: 900 - total flux cleaned = -0.0018691 Jy ! Component: 950 - total flux cleaned = -0.00179366 Jy ! Component: 1000 - total flux cleaned = -0.00174404 Jy ! Component: 1050 - total flux cleaned = -0.00162134 Jy ! Component: 1100 - total flux cleaned = -0.00154856 Jy ! Component: 1150 - total flux cleaned = -0.00147717 Jy ! Component: 1200 - total flux cleaned = -0.00147723 Jy ! Component: 1250 - total flux cleaned = -0.00138381 Jy ! Component: 1300 - total flux cleaned = -0.00143026 Jy ! Component: 1350 - total flux cleaned = -0.00140764 Jy ! Component: 1400 - total flux cleaned = -0.00143041 Jy ! Component: 1450 - total flux cleaned = -0.00138571 Jy ! Component: 1500 - total flux cleaned = -0.00145116 Jy ! Component: 1550 - total flux cleaned = -0.00131988 Jy ! Component: 1600 - total flux cleaned = -0.00127693 Jy ! Component: 1650 - total flux cleaned = -0.00125624 Jy ! Component: 1700 - total flux cleaned = -0.00131975 Jy ! Component: 1750 - total flux cleaned = -0.00121542 Jy ! Component: 1800 - total flux cleaned = -0.00127792 Jy ! Component: 1850 - total flux cleaned = -0.00127782 Jy ! Component: 1900 - total flux cleaned = -0.00123717 Jy ! Component: 1950 - total flux cleaned = -0.00121703 Jy ! Component: 2000 - total flux cleaned = -0.00119707 Jy ! Component: 2050 - total flux cleaned = -0.00117768 Jy ! Component: 2100 - total flux cleaned = -0.00108001 Jy ! Component: 2150 - total flux cleaned = -0.00104142 Jy ! Component: 2200 - total flux cleaned = -0.00106056 Jy ! Component: 2250 - total flux cleaned = -0.000946479 Jy ! Component: 2300 - total flux cleaned = -0.000927747 Jy ! Component: 2350 - total flux cleaned = -0.000890353 Jy ! Component: 2400 - total flux cleaned = -0.000834587 Jy ! Component: 2450 - total flux cleaned = -0.000687676 Jy ! Component: 2500 - total flux cleaned = -0.000779038 Jy ! Component: 2550 - total flux cleaned = -0.000634271 Jy ! Component: 2600 - total flux cleaned = -0.000616277 Jy ! Component: 2650 - total flux cleaned = -0.000544975 Jy ! Component: 2700 - total flux cleaned = -0.000474333 Jy ! Component: 2750 - total flux cleaned = -0.000421597 Jy ! Component: 2800 - total flux cleaned = -0.000317367 Jy ! Component: 2850 - total flux cleaned = -0.000282997 Jy ! Component: 2900 - total flux cleaned = -0.000214326 Jy ! Component: 2950 - total flux cleaned = -0.000129279 Jy ! Component: 3000 - total flux cleaned = 5.64117e-06 Jy ! Component: 3050 - total flux cleaned = 3.92244e-05 Jy ! Component: 3100 - total flux cleaned = 8.88987e-05 Jy ! Component: 3150 - total flux cleaned = 0.000220981 Jy ! Component: 3200 - total flux cleaned = 0.000270157 Jy ! Component: 3250 - total flux cleaned = 0.000367666 Jy ! Component: 3300 - total flux cleaned = 0.000448206 Jy ! Component: 3350 - total flux cleaned = 0.000528322 Jy ! Component: 3400 - total flux cleaned = 0.000591848 Jy ! Component: 3450 - total flux cleaned = 0.000734026 Jy ! Component: 3500 - total flux cleaned = 0.000765437 Jy ! Component: 3550 - total flux cleaned = 0.000843434 Jy ! Component: 3600 - total flux cleaned = 0.0009673 Jy ! Component: 3650 - total flux cleaned = 0.00099797 Jy ! Component: 3700 - total flux cleaned = 0.00116616 Jy ! Component: 3750 - total flux cleaned = 0.0011966 Jy ! Component: 3800 - total flux cleaned = 0.00130223 Jy ! Component: 3850 - total flux cleaned = 0.00137718 Jy ! Component: 3900 - total flux cleaned = 0.0014963 Jy ! Component: 3950 - total flux cleaned = 0.00161469 Jy ! Component: 4000 - total flux cleaned = 0.00161476 Jy ! Component: 4050 - total flux cleaned = 0.00174636 Jy ! Total flux subtracted in 4096 components = 0.00181902 Jy ! Clean residual min=-0.000829 max=0.000862 Jy/beam ! Clean residual mean=-0.000001 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.101311 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 289 components and 0.101311 Jy ![Exited script file: muppet] wmap "J2108-2911_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.145 at -5.094 degrees (North through East) ! Clean map min=-0.0016099 max=0.099594 Jy/beam ! Writing clean map to FITS file: J2108-2911_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0995941 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259018 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.780221 0.780221 1.56044 3.12088 6.24177 12.4835 24.9671 49.9342 99.8683 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.099 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 8.145 at -5.094 degrees (North through East) ! Clean map min=-0.0016099 max=0.099594 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2108-2911_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:34:03 2019