! Started logfile: J2108+1430_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:37 2019 obs J2108+1430_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2108+1430_S_2017_10_09_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.665278 visibilities/baseline/integration-bin. ! Found source: J2108+1430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2108+1430_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.577118Jy sigma=0.005277 ! Fit after self-cal, rms=0.571391Jy sigma=0.005233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=9.836 mas, bpa=-23.56 degrees ! Estimated noise=2465.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.330716 Jy ! Component: 100 - total flux cleaned = 0.408519 Jy ! Total flux subtracted in 100 components = 0.408519 Jy ! Clean residual min=-0.029540 max=0.031733 Jy/beam ! Clean residual mean=-0.000416 rms=0.007107 Jy/beam ! Combined flux in latest and established models = 0.408519 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.408519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147400Jy sigma=0.001139 ! Fit after self-cal, rms=0.147395Jy sigma=0.001139 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=10.18 mas, bpa=-23.26 degrees ! Estimated noise=2152.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391572 Jy ! Component: 100 - total flux cleaned = 0.0611117 Jy ! Component: 150 - total flux cleaned = 0.0718827 Jy ! Component: 200 - total flux cleaned = 0.0763261 Jy ! Total flux subtracted in 200 components = 0.0763261 Jy ! Clean residual min=-0.026138 max=0.022442 Jy/beam ! Clean residual mean=-0.000153 rms=0.006009 Jy/beam ! Combined flux in latest and established models = 0.484845 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 55 components and 0.484845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133808Jy sigma=0.001046 ! Fit after self-cal, rms=0.133791Jy sigma=0.001046 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.01 HN 1.00 KP 1.04 ! LA 1.02 MK 1.04 NL 0.90 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 1.15 HN 1.01 KP 1.02 ! LA 0.95 MK 1.05 NL 0.65 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.09 HN 1.04 KP 0.90 ! LA 0.76 MK 1.04 NL 1.20 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 0.98 KP 1.00* ! LA 1.00* MK 0.88 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.133791Jy sigma=0.001046 ! Fit after self-cal, rms=0.115527Jy sigma=0.000856 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=10.33 mas, bpa=-23.13 degrees ! Estimated noise=2159.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0066922 Jy ! Component: 100 - total flux cleaned = -0.00959992 Jy ! Component: 150 - total flux cleaned = -0.0101796 Jy ! Component: 200 - total flux cleaned = -0.0105694 Jy ! Total flux subtracted in 200 components = -0.0105694 Jy ! Clean residual min=-0.017944 max=0.017994 Jy/beam ! Clean residual mean=-0.000078 rms=0.004537 Jy/beam ! Combined flux in latest and established models = 0.474276 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.474276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114912Jy sigma=0.000853 ! Fit after self-cal, rms=0.114908Jy sigma=0.000853 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114908Jy sigma=0.000853 ! Fit after self-cal, rms=0.088362Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=10.41 mas, bpa=-22.9 degrees ! Estimated noise=2156.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667756 Jy ! Component: 100 - total flux cleaned = 0.000964038 Jy ! Component: 150 - total flux cleaned = 0.00106145 Jy ! Component: 200 - total flux cleaned = 0.00122463 Jy ! Total flux subtracted in 200 components = 0.00122463 Jy ! Clean residual min=-0.006494 max=0.006190 Jy/beam ! Clean residual mean=-0.000003 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.4755 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 79 components and 0.4755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087975Jy sigma=0.000652 ! Fit after self-cal, rms=0.088120Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143653 Jy ! Component: 100 - total flux cleaned = 0.000381312 Jy ! Component: 150 - total flux cleaned = 0.00043354 Jy ! Component: 200 - total flux cleaned = 0.000482712 Jy ! Total flux subtracted in 200 components = 0.000482712 Jy ! Clean residual min=-0.006516 max=0.005879 Jy/beam ! Clean residual mean=-0.000002 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.475983 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 87 components and 0.475983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088054Jy sigma=0.000651 ! Fit after self-cal, rms=0.088058Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088058Jy sigma=0.000651 ! Fit after self-cal, rms=0.088181Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=10.46 mas, bpa=-22.95 degrees ! Estimated noise=2153.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00216292 Jy ! Component: 100 - total flux cleaned = -0.00200713 Jy ! Component: 150 - total flux cleaned = -0.0018808 Jy ! Component: 200 - total flux cleaned = -0.00167844 Jy ! Total flux subtracted in 200 components = -0.00167844 Jy ! Clean residual min=-0.006379 max=0.005620 Jy/beam ! Clean residual mean=-0.000004 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.474304 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 94 components and 0.474304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088047Jy sigma=0.000649 ! Fit after self-cal, rms=0.088058Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178895 Jy ! Component: 100 - total flux cleaned = 0.000327128 Jy ! Component: 150 - total flux cleaned = 0.000457409 Jy ! Component: 200 - total flux cleaned = 0.000544198 Jy ! Total flux subtracted in 200 components = 0.000544198 Jy ! Clean residual min=-0.006391 max=0.005754 Jy/beam ! Clean residual mean=-0.000002 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.474849 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 99 components and 0.474849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088034Jy sigma=0.000649 ! Fit after self-cal, rms=0.088036Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088036Jy sigma=0.000649 ! Fit after self-cal, rms=0.088182Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=11.55 mas, bpa=-21.95 degrees ! Estimated noise=2527.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425893 Jy ! Component: 100 - total flux cleaned = -0.000519518 Jy ! Component: 150 - total flux cleaned = -0.000521579 Jy ! Component: 200 - total flux cleaned = -0.000547691 Jy ! Total flux subtracted in 200 components = -0.000547691 Jy ! Clean residual min=-0.006041 max=0.006085 Jy/beam ! Clean residual mean=0.000002 rms=0.001791 Jy/beam ! Combined flux in latest and established models = 0.474301 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.474301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088138Jy sigma=0.000648 ! Fit after self-cal, rms=0.088149Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.48389e-06 Jy ! Component: 100 - total flux cleaned = 5.91736e-05 Jy ! Component: 150 - total flux cleaned = 7.92287e-05 Jy ! Component: 200 - total flux cleaned = 0.000115293 Jy ! Total flux subtracted in 200 components = 0.000115293 Jy ! Clean residual min=-0.006029 max=0.006054 Jy/beam ! Clean residual mean=0.000003 rms=0.001787 Jy/beam ! Combined flux in latest and established models = 0.474416 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 112 components and 0.474416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088149Jy sigma=0.000648 ! Fit after self-cal, rms=0.088152Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=10.5 mas, bpa=-22.99 degrees ! Estimated noise=2152.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 10.5 at -22.99 degrees (North through East) ! Clean map min=-0.0061632 max=0.42882 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.235 mas, bmaj=10.04 mas, bpa=-22.99 degrees ! Estimated noise=2483.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331059 Jy ! Component: 100 - total flux cleaned = 0.405561 Jy ! Component: 150 - total flux cleaned = 0.432895 Jy ! Component: 200 - total flux cleaned = 0.447202 Jy ! Total flux subtracted in 200 components = 0.447202 Jy ! Clean residual min=-0.006653 max=0.009492 Jy/beam ! Clean residual mean=-0.000118 rms=0.001868 Jy/beam ! Combined flux in latest and established models = 0.447202 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.447202 Jy ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=10.5 mas, bpa=-22.99 degrees ! Estimated noise=2152.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123893 Jy ! Component: 100 - total flux cleaned = 0.0198659 Jy ! Component: 150 - total flux cleaned = 0.0235095 Jy ! Component: 200 - total flux cleaned = 0.0248682 Jy ! Total flux subtracted in 200 components = 0.0248682 Jy ! Clean residual min=-0.005923 max=0.005742 Jy/beam ! Clean residual mean=-0.000012 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.47207 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.47207 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.076 mas, bmaj=11.55 mas, bpa=-21.95 degrees ! Estimated noise=2527.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366486 Jy ! Component: 100 - total flux cleaned = 0.00405825 Jy ! Component: 150 - total flux cleaned = 0.00421793 Jy ! Component: 200 - total flux cleaned = 0.00421951 Jy ! Total flux subtracted in 200 components = 0.00421951 Jy ! Clean residual min=-0.005896 max=0.005400 Jy/beam ! Clean residual mean=0.000006 rms=0.001704 Jy/beam ! Combined flux in latest and established models = 0.47629 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.93777e-05 Jy ! Component: 100 - total flux cleaned = -5.67984e-05 Jy ! Component: 150 - total flux cleaned = -5.63978e-05 Jy ! Component: 200 - total flux cleaned = -5.65879e-05 Jy ! Total flux subtracted in 200 components = -5.65879e-05 Jy ! Clean residual min=-0.005748 max=0.005131 Jy/beam ! Clean residual mean=0.000008 rms=0.001679 Jy/beam ! Combined flux in latest and established models = 0.476233 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 105 components and 0.476233 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=10.5 mas, bpa=-22.99 degrees ! Estimated noise=2152.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112273 Jy ! Component: 100 - total flux cleaned = -0.00137828 Jy ! Component: 150 - total flux cleaned = -0.00148311 Jy ! Component: 200 - total flux cleaned = -0.00161878 Jy ! Total flux subtracted in 200 components = -0.00161878 Jy ! Clean residual min=-0.005852 max=0.005172 Jy/beam ! Clean residual mean=0.000003 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.474614 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.474614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087546Jy sigma=0.000644 ! Fit after self-cal, rms=0.087522Jy sigma=0.000644 wmodel J2108+1430_S_2017_10_09_pus_map.mod ! Writing 126 model components to file: J2108+1430_S_2017_10_09_pus_map.mod wobs J2108+1430_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2108+1430_S_2017_10_09_pus_uvs.fits wwins J2108+1430_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J2108+1430_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259892 Jy ! Component: 100 - total flux cleaned = 0.00127849 Jy ! Component: 150 - total flux cleaned = 0.0019066 Jy ! Component: 200 - total flux cleaned = 0.00249959 Jy ! Component: 250 - total flux cleaned = 0.00292107 Jy ! Component: 300 - total flux cleaned = 0.00332281 Jy ! Component: 350 - total flux cleaned = 0.00383546 Jy ! Component: 400 - total flux cleaned = 0.0042669 Jy ! Component: 450 - total flux cleaned = 0.00480013 Jy ! Component: 500 - total flux cleaned = 0.00514408 Jy ! Component: 550 - total flux cleaned = 0.0055333 Jy ! Component: 600 - total flux cleaned = 0.00596429 Jy ! Component: 650 - total flux cleaned = 0.00633194 Jy ! Component: 700 - total flux cleaned = 0.00679057 Jy ! Component: 750 - total flux cleaned = 0.00713741 Jy ! Component: 800 - total flux cleaned = 0.00747465 Jy ! Component: 850 - total flux cleaned = 0.00761534 Jy ! Component: 900 - total flux cleaned = 0.00793788 Jy ! Component: 950 - total flux cleaned = 0.00816139 Jy ! Component: 1000 - total flux cleaned = 0.00838208 Jy ! Component: 1050 - total flux cleaned = 0.00851311 Jy ! Component: 1100 - total flux cleaned = 0.00876892 Jy ! Component: 1150 - total flux cleaned = 0.00901931 Jy ! Component: 1200 - total flux cleaned = 0.00914275 Jy ! Component: 1250 - total flux cleaned = 0.00926334 Jy ! Component: 1300 - total flux cleaned = 0.00946034 Jy ! Component: 1350 - total flux cleaned = 0.00942104 Jy ! Component: 1400 - total flux cleaned = 0.00961187 Jy ! Component: 1450 - total flux cleaned = 0.00964865 Jy ! Component: 1500 - total flux cleaned = 0.00964809 Jy ! Component: 1550 - total flux cleaned = 0.00968497 Jy ! Component: 1600 - total flux cleaned = 0.00975695 Jy ! Component: 1650 - total flux cleaned = 0.00965084 Jy ! Component: 1700 - total flux cleaned = 0.00965117 Jy ! Component: 1750 - total flux cleaned = 0.00954802 Jy ! Component: 1800 - total flux cleaned = 0.00951402 Jy ! Component: 1850 - total flux cleaned = 0.00941319 Jy ! Component: 1900 - total flux cleaned = 0.00928058 Jy ! Component: 1950 - total flux cleaned = 0.00918268 Jy ! Component: 2000 - total flux cleaned = 0.00898872 Jy ! Component: 2050 - total flux cleaned = 0.00892468 Jy ! Component: 2100 - total flux cleaned = 0.00886138 Jy ! Component: 2150 - total flux cleaned = 0.00876781 Jy ! Component: 2200 - total flux cleaned = 0.00858268 Jy ! Component: 2250 - total flux cleaned = 0.00852179 Jy ! Component: 2300 - total flux cleaned = 0.00840122 Jy ! Component: 2350 - total flux cleaned = 0.00831182 Jy ! Component: 2400 - total flux cleaned = 0.00816436 Jy ! Component: 2450 - total flux cleaned = 0.00807702 Jy ! Component: 2500 - total flux cleaned = 0.00793335 Jy ! Component: 2550 - total flux cleaned = 0.0079048 Jy ! Component: 2600 - total flux cleaned = 0.00779163 Jy ! Component: 2650 - total flux cleaned = 0.00767984 Jy ! Component: 2700 - total flux cleaned = 0.00765231 Jy ! Component: 2750 - total flux cleaned = 0.00759732 Jy ! Component: 2800 - total flux cleaned = 0.00751527 Jy ! Component: 2850 - total flux cleaned = 0.00751517 Jy ! Component: 2900 - total flux cleaned = 0.00743444 Jy ! Component: 2950 - total flux cleaned = 0.00738114 Jy ! Component: 3000 - total flux cleaned = 0.00740723 Jy ! Component: 3050 - total flux cleaned = 0.00735474 Jy ! Component: 3100 - total flux cleaned = 0.00725069 Jy ! Component: 3150 - total flux cleaned = 0.00725077 Jy ! Component: 3200 - total flux cleaned = 0.00725066 Jy ! Component: 3250 - total flux cleaned = 0.00725015 Jy ! Component: 3300 - total flux cleaned = 0.00709912 Jy ! Component: 3350 - total flux cleaned = 0.00714898 Jy ! Component: 3400 - total flux cleaned = 0.00714893 Jy ! Component: 3450 - total flux cleaned = 0.00714877 Jy ! Component: 3500 - total flux cleaned = 0.00714864 Jy ! Component: 3550 - total flux cleaned = 0.00712467 Jy ! Component: 3600 - total flux cleaned = 0.00722102 Jy ! Component: 3650 - total flux cleaned = 0.00722111 Jy ! Component: 3700 - total flux cleaned = 0.00722131 Jy ! Component: 3750 - total flux cleaned = 0.00729207 Jy ! Component: 3800 - total flux cleaned = 0.00733876 Jy ! Component: 3850 - total flux cleaned = 0.00743174 Jy ! Component: 3900 - total flux cleaned = 0.00747789 Jy ! Component: 3950 - total flux cleaned = 0.00754658 Jy ! Component: 4000 - total flux cleaned = 0.00756923 Jy ! Component: 4050 - total flux cleaned = 0.00765987 Jy ! Total flux subtracted in 4096 components = 0.00765974 Jy ! Clean residual min=-0.001392 max=0.001777 Jy/beam ! Clean residual mean=0.000004 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.482274 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 446 components and 0.482274 Jy ![Exited script file: muppet] wmap "J2108+1430_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 10.5 at -22.99 degrees (North through East) ! Clean map min=-0.0035381 max=0.42864 Jy/beam ! Writing clean map to FITS file: J2108+1430_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.428636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000413182 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289184 0.289184 0.578368 1.15674 2.31347 4.62694 9.25388 18.5078 37.0155 74.0311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.428 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.809 x 10.5 at -22.99 degrees (North through East) ! Clean map min=-0.0035381 max=0.42864 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2108+1430_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:20:41 2019