! Started logfile: J2107-1708_S_2017_08_05_pus_uvs.log on Thu May 9 19:38:52 2019 obs J2107-1708_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2107-1708_S_2017_08_05_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J2107-1708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 9632 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2107-1708_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 354 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.880124Jy sigma=0.006960 ! Fit after self-cal, rms=0.866519Jy sigma=0.006853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=7.066 mas, bpa=-5.828 degrees ! Estimated noise=1468.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105609 Jy ! Component: 100 - total flux cleaned = 0.128742 Jy ! Total flux subtracted in 100 components = 0.128742 Jy ! Clean residual min=-0.005166 max=0.006926 Jy/beam ! Clean residual mean=0.000001 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.128742 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.128742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094799Jy sigma=0.000686 ! Fit after self-cal, rms=0.094796Jy sigma=0.000686 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=7.911 mas, bpa=-3.924 degrees ! Estimated noise=1125.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854021 Jy ! Component: 100 - total flux cleaned = 0.0119922 Jy ! Component: 150 - total flux cleaned = 0.0137341 Jy ! Component: 200 - total flux cleaned = 0.0146521 Jy ! Total flux subtracted in 200 components = 0.0146521 Jy ! Clean residual min=-0.003876 max=0.004006 Jy/beam ! Clean residual mean=-0.000004 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.143394 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 29 components and 0.143394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094051Jy sigma=0.000681 ! Fit after self-cal, rms=0.094063Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.03 KP 1.05 ! LA 1.02 MK 0.97 NL 0.89 OV 1.01 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.07 KP 1.03 ! LA 0.97 MK 1.01 NL 1.04 OV 1.03 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.99 KP 0.91 ! LA 0.77 MK 1.01 NL 1.16 OV 0.95 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.01 KP 1.00* ! LA 1.00* MK 1.08 NL 1.00* OV 1.00* ! PT 1.09 SC 1.00* ! ! ! Fit before self-cal, rms=0.094063Jy sigma=0.000681 ! Fit after self-cal, rms=0.091549Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=7.924 mas, bpa=-3.691 degrees ! Estimated noise=1122.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700487 Jy ! Component: 100 - total flux cleaned = -0.000770235 Jy ! Component: 150 - total flux cleaned = -0.000830825 Jy ! Component: 200 - total flux cleaned = -0.000870784 Jy ! Total flux subtracted in 200 components = -0.000870784 Jy ! Clean residual min=-0.002975 max=0.002828 Jy/beam ! Clean residual mean=-0.000001 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.142523 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.142523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091538Jy sigma=0.000673 ! Fit after self-cal, rms=0.091531Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091531Jy sigma=0.000673 ! Fit after self-cal, rms=0.092964Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=7.943 mas, bpa=-3.71 degrees ! Estimated noise=1122.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149078 Jy ! Component: 100 - total flux cleaned = -0.000160708 Jy ! Component: 150 - total flux cleaned = -0.00016062 Jy ! Component: 200 - total flux cleaned = -0.000151833 Jy ! Total flux subtracted in 200 components = -0.000151833 Jy ! Clean residual min=-0.002632 max=0.002745 Jy/beam ! Clean residual mean=-0.000000 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.142371 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.142371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092960Jy sigma=0.000672 ! Fit after self-cal, rms=0.092990Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77927e-05 Jy ! Component: 100 - total flux cleaned = -2.77366e-05 Jy ! Component: 150 - total flux cleaned = -1.96805e-05 Jy ! Component: 200 - total flux cleaned = -1.19161e-05 Jy ! Total flux subtracted in 200 components = -1.19161e-05 Jy ! Clean residual min=-0.002625 max=0.002743 Jy/beam ! Clean residual mean=-0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.142359 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.142359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092987Jy sigma=0.000672 ! Fit after self-cal, rms=0.092987Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092987Jy sigma=0.000672 ! Fit after self-cal, rms=0.093083Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=7.949 mas, bpa=-3.697 degrees ! Estimated noise=1122.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013227 Jy ! Component: 100 - total flux cleaned = -0.000141935 Jy ! Component: 150 - total flux cleaned = -0.000133987 Jy ! Component: 200 - total flux cleaned = -0.000126008 Jy ! Total flux subtracted in 200 components = -0.000126008 Jy ! Clean residual min=-0.002615 max=0.002747 Jy/beam ! Clean residual mean=-0.000000 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.142233 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.142233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093081Jy sigma=0.000672 ! Fit after self-cal, rms=0.093082Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.46558e-05 Jy ! Component: 100 - total flux cleaned = -1.6872e-05 Jy ! Component: 150 - total flux cleaned = -9.556e-06 Jy ! Component: 200 - total flux cleaned = -2.4381e-06 Jy ! Total flux subtracted in 200 components = -2.4381e-06 Jy ! Clean residual min=-0.002614 max=0.002748 Jy/beam ! Clean residual mean=-0.000000 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.142231 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.142231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093080Jy sigma=0.000672 ! Fit after self-cal, rms=0.093080Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093080Jy sigma=0.000672 ! Fit after self-cal, rms=0.093117Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.557 mas, bmaj=16.65 mas, bpa=-0.3221 degrees ! Estimated noise=1435.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116663 Jy ! Component: 100 - total flux cleaned = 0.000117656 Jy ! Component: 150 - total flux cleaned = 0.00011808 Jy ! Component: 200 - total flux cleaned = 0.000111459 Jy ! Total flux subtracted in 200 components = 0.000111459 Jy ! Clean residual min=-0.002646 max=0.002722 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.142342 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 57 components and 0.142342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000672 ! Fit after self-cal, rms=0.093118Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09612e-07 Jy ! Component: 100 - total flux cleaned = -8.94304e-06 Jy ! Component: 150 - total flux cleaned = -8.97981e-06 Jy ! Component: 200 - total flux cleaned = -1.03649e-05 Jy ! Total flux subtracted in 200 components = -1.03649e-05 Jy ! Clean residual min=-0.002644 max=0.002724 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.142332 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.142332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093119Jy sigma=0.000672 ! Fit after self-cal, rms=0.093119Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.954 mas, bpa=-3.682 degrees ! Estimated noise=1123.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.954 at -3.682 degrees (North through East) ! Clean map min=-0.002488 max=0.13692 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.525 mas, bmaj=7.076 mas, bpa=-5.633 degrees ! Estimated noise=1476.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106076 Jy ! Component: 100 - total flux cleaned = 0.129225 Jy ! Component: 150 - total flux cleaned = 0.135918 Jy ! Component: 200 - total flux cleaned = 0.139246 Jy ! Total flux subtracted in 200 components = 0.139246 Jy ! Clean residual min=-0.003644 max=0.003768 Jy/beam ! Clean residual mean=0.000003 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.139246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.139246 Jy ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.954 mas, bpa=-3.682 degrees ! Estimated noise=1123.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193422 Jy ! Component: 100 - total flux cleaned = 0.00237237 Jy ! Component: 150 - total flux cleaned = 0.00251152 Jy ! Component: 200 - total flux cleaned = 0.00262082 Jy ! Total flux subtracted in 200 components = 0.00262082 Jy ! Clean residual min=-0.002614 max=0.002742 Jy/beam ! Clean residual mean=-0.000000 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.141867 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.141867 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.557 mas, bmaj=16.65 mas, bpa=-0.3221 degrees ! Estimated noise=1435.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443159 Jy ! Component: 100 - total flux cleaned = 0.000445693 Jy ! Component: 150 - total flux cleaned = 0.000457761 Jy ! Component: 200 - total flux cleaned = 0.000465809 Jy ! Total flux subtracted in 200 components = 0.000465809 Jy ! Clean residual min=-0.002675 max=0.002723 Jy/beam ! Clean residual mean=0.000001 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.142332 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.41401e-07 Jy ! Component: 100 - total flux cleaned = 5.3241e-06 Jy ! Component: 150 - total flux cleaned = 5.46641e-06 Jy ! Component: 200 - total flux cleaned = 9.38143e-06 Jy ! Total flux subtracted in 200 components = 9.38143e-06 Jy ! Clean residual min=-0.002644 max=0.002719 Jy/beam ! Clean residual mean=0.000001 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.142342 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.142342 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.053 mas, bmaj=7.954 mas, bpa=-3.682 degrees ! Estimated noise=1123.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.5138e-06 Jy ! Component: 100 - total flux cleaned = -5.49116e-05 Jy ! Component: 150 - total flux cleaned = -8.0662e-05 Jy ! Component: 200 - total flux cleaned = -9.07386e-05 Jy ! Total flux subtracted in 200 components = -9.07386e-05 Jy ! Clean residual min=-0.002569 max=0.002754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.142251 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.142251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.000672 ! Fit after self-cal, rms=0.093114Jy sigma=0.000672 wmodel J2107-1708_S_2017_08_05_pus_map.mod ! Writing 62 model components to file: J2107-1708_S_2017_08_05_pus_map.mod wobs J2107-1708_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2107-1708_S_2017_08_05_pus_uvs.fits wwins J2107-1708_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J2107-1708_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.11763e-05 Jy ! Component: 100 - total flux cleaned = -0.00024987 Jy ! Component: 150 - total flux cleaned = -0.000423597 Jy ! Component: 200 - total flux cleaned = -0.000382003 Jy ! Component: 250 - total flux cleaned = -0.000501943 Jy ! Component: 300 - total flux cleaned = -0.000657501 Jy ! Component: 350 - total flux cleaned = -0.000885146 Jy ! Component: 400 - total flux cleaned = -0.00110556 Jy ! Component: 450 - total flux cleaned = -0.00128467 Jy ! Component: 500 - total flux cleaned = -0.00156413 Jy ! Component: 550 - total flux cleaned = -0.00156463 Jy ! Component: 600 - total flux cleaned = -0.0018004 Jy ! Component: 650 - total flux cleaned = -0.00189842 Jy ! Component: 700 - total flux cleaned = -0.00196316 Jy ! Component: 750 - total flux cleaned = -0.00208947 Jy ! Component: 800 - total flux cleaned = -0.00230544 Jy ! Component: 850 - total flux cleaned = -0.00236557 Jy ! Component: 900 - total flux cleaned = -0.00242464 Jy ! Component: 950 - total flux cleaned = -0.00248317 Jy ! Component: 1000 - total flux cleaned = -0.00256857 Jy ! Component: 1050 - total flux cleaned = -0.0025683 Jy ! Component: 1100 - total flux cleaned = -0.00259578 Jy ! Component: 1150 - total flux cleaned = -0.00265057 Jy ! Component: 1200 - total flux cleaned = -0.00270439 Jy ! Component: 1250 - total flux cleaned = -0.00267734 Jy ! Component: 1300 - total flux cleaned = -0.00272928 Jy ! Component: 1350 - total flux cleaned = -0.00275543 Jy ! Component: 1400 - total flux cleaned = -0.00288252 Jy ! Component: 1450 - total flux cleaned = -0.00290776 Jy ! Component: 1500 - total flux cleaned = -0.00305582 Jy ! Component: 1550 - total flux cleaned = -0.00320201 Jy ! Component: 1600 - total flux cleaned = -0.00336954 Jy ! Component: 1650 - total flux cleaned = -0.00339309 Jy ! Component: 1700 - total flux cleaned = -0.00346319 Jy ! Component: 1750 - total flux cleaned = -0.00353318 Jy ! Component: 1800 - total flux cleaned = -0.00364776 Jy ! Component: 1850 - total flux cleaned = -0.00376081 Jy ! Component: 1900 - total flux cleaned = -0.00384961 Jy ! Component: 1950 - total flux cleaned = -0.00393718 Jy ! Component: 2000 - total flux cleaned = -0.00395919 Jy ! Component: 2050 - total flux cleaned = -0.00402437 Jy ! Component: 2100 - total flux cleaned = -0.00410923 Jy ! Component: 2150 - total flux cleaned = -0.0041302 Jy ! Component: 2200 - total flux cleaned = -0.00419297 Jy ! Component: 2250 - total flux cleaned = -0.00419249 Jy ! Component: 2300 - total flux cleaned = -0.00429426 Jy ! Component: 2350 - total flux cleaned = -0.0043143 Jy ! Component: 2400 - total flux cleaned = -0.0042741 Jy ! Component: 2450 - total flux cleaned = -0.00435331 Jy ! Component: 2500 - total flux cleaned = -0.004373 Jy ! Component: 2550 - total flux cleaned = -0.0044308 Jy ! Component: 2600 - total flux cleaned = -0.00446914 Jy ! Component: 2650 - total flux cleaned = -0.00446896 Jy ! Component: 2700 - total flux cleaned = -0.00452557 Jy ! Component: 2750 - total flux cleaned = -0.00456286 Jy ! Component: 2800 - total flux cleaned = -0.0045628 Jy ! Component: 2850 - total flux cleaned = -0.00452636 Jy ! Component: 2900 - total flux cleaned = -0.004581 Jy ! Component: 2950 - total flux cleaned = -0.0046169 Jy ! Component: 3000 - total flux cleaned = -0.00458122 Jy ! Component: 3050 - total flux cleaned = -0.0045636 Jy ! Component: 3100 - total flux cleaned = -0.0045987 Jy ! Component: 3150 - total flux cleaned = -0.00465053 Jy ! Component: 3200 - total flux cleaned = -0.00466757 Jy ! Component: 3250 - total flux cleaned = -0.00461633 Jy ! Component: 3300 - total flux cleaned = -0.00461654 Jy ! Component: 3350 - total flux cleaned = -0.00459975 Jy ! Component: 3400 - total flux cleaned = -0.00461646 Jy ! Component: 3450 - total flux cleaned = -0.00463291 Jy ! Component: 3500 - total flux cleaned = -0.00461652 Jy ! Component: 3550 - total flux cleaned = -0.00458426 Jy ! Component: 3600 - total flux cleaned = -0.00458432 Jy ! Component: 3650 - total flux cleaned = -0.00456843 Jy ! Component: 3700 - total flux cleaned = -0.00455259 Jy ! Component: 3750 - total flux cleaned = -0.00453701 Jy ! Component: 3800 - total flux cleaned = -0.00464663 Jy ! Component: 3850 - total flux cleaned = -0.00458439 Jy ! Component: 3900 - total flux cleaned = -0.00455344 Jy ! Component: 3950 - total flux cleaned = -0.0045074 Jy ! Component: 4000 - total flux cleaned = -0.00452262 Jy ! Component: 4050 - total flux cleaned = -0.00446196 Jy ! Total flux subtracted in 4096 components = -0.00437178 Jy ! Clean residual min=-0.000820 max=0.000849 Jy/beam ! Clean residual mean=0.000001 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.137879 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 360 components and 0.137879 Jy ![Exited script file: muppet] wmap "J2107-1708_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.954 at -3.682 degrees (North through East) ! Clean map min=-0.0019034 max=0.13683 Jy/beam ! Writing clean map to FITS file: J2107-1708_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136831 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000267257 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.585956 0.585956 1.17191 2.34382 4.68765 9.3753 18.7506 37.5012 75.0024 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.053 x 7.954 at -3.682 degrees (North through East) ! Clean map min=-0.0019034 max=0.13683 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2107-1708_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:38:57 2019