! Started logfile: J2105-4848_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:06 2019 obs J2105-4848_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2105-4848_S_2017_08_12_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.124366 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2105-4848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 2552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2105-4848_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 879 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 764 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1140 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.659192Jy sigma=0.003335 ! Fit after self-cal, rms=0.546327Jy sigma=0.002794 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=16.95 mas, bpa=22.63 degrees ! Estimated noise=6417.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.350495 Jy ! Component: 100 - total flux cleaned = 0.471673 Jy ! Total flux subtracted in 100 components = 0.471673 Jy ! Clean residual min=-0.044773 max=0.054229 Jy/beam ! Clean residual mean=-0.001500 rms=0.016888 Jy/beam ! Combined flux in latest and established models = 0.471673 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.471673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163701Jy sigma=0.000833 ! Fit after self-cal, rms=0.163251Jy sigma=0.000831 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=22.44 mas, bpa=18.85 degrees ! Estimated noise=4830.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731639 Jy ! Component: 100 - total flux cleaned = 0.0989214 Jy ! Component: 150 - total flux cleaned = 0.115117 Jy ! Component: 200 - total flux cleaned = 0.121841 Jy ! Total flux subtracted in 200 components = 0.121841 Jy ! Clean residual min=-0.011249 max=0.011277 Jy/beam ! Clean residual mean=-0.000436 rms=0.004034 Jy/beam ! Combined flux in latest and established models = 0.593515 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 81 components and 0.593515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127169Jy sigma=0.000643 ! Fit after self-cal, rms=0.126811Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 1.00 MK 1.00* NL 1.00* OV 1.00* ! PT 0.95 SC 1.02 ! ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 0.95 MK 1.00* NL 1.00* OV 1.05 ! PT 1.00* SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.126811Jy sigma=0.000642 ! Fit after self-cal, rms=0.129158Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=22.52 mas, bpa=18.86 degrees ! Estimated noise=5772.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137111 Jy ! Component: 100 - total flux cleaned = 0.00194915 Jy ! Component: 150 - total flux cleaned = 0.00393697 Jy ! Component: 200 - total flux cleaned = 0.00579313 Jy ! Total flux subtracted in 200 components = 0.00579313 Jy ! Clean residual min=-0.003184 max=0.003149 Jy/beam ! Clean residual mean=-0.000044 rms=0.001239 Jy/beam ! Combined flux in latest and established models = 0.599308 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 135 components and 0.599308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127288Jy sigma=0.000641 ! Fit after self-cal, rms=0.127288Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127288Jy sigma=0.000640 ! Fit after self-cal, rms=0.127474Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=22.52 mas, bpa=18.86 degrees ! Estimated noise=5779.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149957 Jy ! Component: 100 - total flux cleaned = 0.00150578 Jy ! Component: 150 - total flux cleaned = 0.0012131 Jy ! Component: 200 - total flux cleaned = 0.0009529 Jy ! Total flux subtracted in 200 components = 0.0009529 Jy ! Clean residual min=-0.002040 max=0.002006 Jy/beam ! Clean residual mean=-0.000013 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.60026 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 171 components and 0.60026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127125Jy sigma=0.000638 ! Fit after self-cal, rms=0.127122Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113763 Jy ! Component: 100 - total flux cleaned = -8.24422e-05 Jy ! Component: 150 - total flux cleaned = -0.000165076 Jy ! Component: 200 - total flux cleaned = -0.000252441 Jy ! Total flux subtracted in 200 components = -0.000252441 Jy ! Clean residual min=-0.001459 max=0.001476 Jy/beam ! Clean residual mean=-0.000007 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.600008 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 207 components and 0.600008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126980Jy sigma=0.000638 ! Fit after self-cal, rms=0.126979Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126979Jy sigma=0.000638 ! Fit after self-cal, rms=0.127123Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=22.53 mas, bpa=18.85 degrees ! Estimated noise=5788.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000714214 Jy ! Component: 100 - total flux cleaned = -0.00124813 Jy ! Component: 150 - total flux cleaned = -0.00182837 Jy ! Component: 200 - total flux cleaned = -0.00239354 Jy ! Total flux subtracted in 200 components = -0.00239354 Jy ! Clean residual min=-0.001162 max=0.001159 Jy/beam ! Clean residual mean=-0.000005 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.597615 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 234 components and 0.597615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127048Jy sigma=0.000637 ! Fit after self-cal, rms=0.127043Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881832 Jy ! Component: 100 - total flux cleaned = -0.00126906 Jy ! Component: 150 - total flux cleaned = -0.00170258 Jy ! Component: 200 - total flux cleaned = -0.00200189 Jy ! Total flux subtracted in 200 components = -0.00200189 Jy ! Clean residual min=-0.000982 max=0.000980 Jy/beam ! Clean residual mean=-0.000008 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.595613 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 261 components and 0.595613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126986Jy sigma=0.000637 ! Fit after self-cal, rms=0.126985Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126985Jy sigma=0.000637 ! Fit after self-cal, rms=0.126786Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.68 mas, bmaj=48.35 mas, bpa=11.67 degrees ! Estimated noise=7647.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241893 Jy ! Component: 100 - total flux cleaned = 0.000176983 Jy ! Component: 150 - total flux cleaned = 0.00014643 Jy ! Component: 200 - total flux cleaned = 0.000118438 Jy ! Total flux subtracted in 200 components = 0.000118438 Jy ! Clean residual min=-0.000471 max=0.000474 Jy/beam ! Clean residual mean=-0.000017 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.595731 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 302 components and 0.595731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126771Jy sigma=0.000637 ! Fit after self-cal, rms=0.126772Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155793 Jy ! Component: 100 - total flux cleaned = -0.000154848 Jy ! Component: 150 - total flux cleaned = -0.000174782 Jy ! Component: 200 - total flux cleaned = -0.000257306 Jy ! Total flux subtracted in 200 components = -0.000257306 Jy ! Clean residual min=-0.000341 max=0.000344 Jy/beam ! Clean residual mean=-0.000017 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.595474 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 330 components and 0.595474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126764Jy sigma=0.000637 ! Fit after self-cal, rms=0.126764Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=22.48 mas, bpa=18.87 degrees ! Estimated noise=5780.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 22.48 at 18.87 degrees (North through East) ! Clean map min=-0.0081127 max=0.44906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=19.01 mas, bpa=20.38 degrees ! Estimated noise=7223.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.377776 Jy ! Component: 100 - total flux cleaned = 0.493603 Jy ! Component: 150 - total flux cleaned = 0.542299 Jy ! Component: 200 - total flux cleaned = 0.560404 Jy ! Total flux subtracted in 200 components = 0.560404 Jy ! Clean residual min=-0.017964 max=0.018088 Jy/beam ! Clean residual mean=-0.000572 rms=0.006516 Jy/beam ! Combined flux in latest and established models = 0.560404 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.560404 Jy ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=22.48 mas, bpa=18.87 degrees ! Estimated noise=5780.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068875 Jy ! Component: 100 - total flux cleaned = 0.0138524 Jy ! Component: 150 - total flux cleaned = 0.0174858 Jy ! Component: 200 - total flux cleaned = 0.0179683 Jy ! Total flux subtracted in 200 components = 0.0179683 Jy ! Clean residual min=-0.007153 max=0.007336 Jy/beam ! Clean residual mean=-0.000190 rms=0.002373 Jy/beam ! Combined flux in latest and established models = 0.578372 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 98 components and 0.578372 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.68 mas, bmaj=48.35 mas, bpa=11.67 degrees ! Estimated noise=7647.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365494 Jy ! Component: 100 - total flux cleaned = 0.00680498 Jy ! Component: 150 - total flux cleaned = 0.00955972 Jy ! Component: 200 - total flux cleaned = 0.0115949 Jy ! Total flux subtracted in 200 components = 0.0115949 Jy ! Clean residual min=-0.001964 max=0.002006 Jy/beam ! Clean residual mean=-0.000057 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.589967 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021774 Jy ! Component: 100 - total flux cleaned = 0.00438224 Jy ! Component: 150 - total flux cleaned = 0.00601206 Jy ! Component: 200 - total flux cleaned = 0.00710574 Jy ! Total flux subtracted in 200 components = 0.00710574 Jy ! Clean residual min=-0.001826 max=0.001874 Jy/beam ! Clean residual mean=-0.000030 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.597073 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 188 components and 0.597072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.999 mas, bmaj=22.48 mas, bpa=18.87 degrees ! Estimated noise=5780.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000326057 Jy ! Component: 100 - total flux cleaned = 0.000204335 Jy ! Component: 150 - total flux cleaned = 0.000314184 Jy ! Component: 200 - total flux cleaned = 0.000734114 Jy ! Total flux subtracted in 200 components = 0.000734114 Jy ! Clean residual min=-0.001755 max=0.001753 Jy/beam ! Clean residual mean=0.000014 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.597807 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 215 components and 0.597807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126918Jy sigma=0.000637 ! Fit after self-cal, rms=0.126887Jy sigma=0.000637 wmodel J2105-4848_S_2017_08_12_pus_map.mod ! Writing 215 model components to file: J2105-4848_S_2017_08_12_pus_map.mod wobs J2105-4848_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2105-4848_S_2017_08_12_pus_uvs.fits wwins J2105-4848_S_2017_08_12_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2105-4848_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 22.48 at 18.87 degrees (North through East) ! Clean map min=-0.0074553 max=0.43457 Jy/beam ! Writing clean map to FITS file: J2105-4848_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434571 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000524324 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.36196 0.36196 0.723919 1.44784 2.89568 5.79136 11.5827 23.1654 46.3308 92.6617 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.999 x 22.48 at 18.87 degrees (North through East) ! Clean map min=-0.0074553 max=0.43457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2105-4848_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:09 2019