! Started logfile: J2103-0933_S_2017_03_23_pus_uvs.log on Mon May 13 10:08:44 2019 obs J2103-0933_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2103-0933_S_2017_03_23_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.892377 visibilities/baseline/integration-bin. ! Found source: J2103-0933 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 27628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2103-0933_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 99 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 575 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963894Jy sigma=0.007186 ! Fit after self-cal, rms=0.935721Jy sigma=0.006999 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=6.973 mas, bpa=-4.625 degrees ! Estimated noise=937.608 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494771 Jy ! Component: 100 - total flux cleaned = 0.0649275 Jy ! Total flux subtracted in 100 components = 0.0649275 Jy ! Clean residual min=-0.003955 max=0.008069 Jy/beam ! Clean residual mean=-0.000002 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0649275 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0649275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101815Jy sigma=0.000690 ! Fit after self-cal, rms=0.101588Jy sigma=0.000688 ! Inverting map ! Added new window around map position (-2.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856287 Jy ! Component: 100 - total flux cleaned = 0.0140799 Jy ! Total flux subtracted in 100 components = 0.0140799 Jy ! Clean residual min=-0.003951 max=0.006704 Jy/beam ! Clean residual mean=-0.000001 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.0790074 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.0790074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100361Jy sigma=0.000679 ! Fit after self-cal, rms=0.100344Jy sigma=0.000679 ! Inverting map ! Added new window around map position (4.5, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658151 Jy ! Component: 100 - total flux cleaned = 0.0107048 Jy ! Total flux subtracted in 100 components = 0.0107048 Jy ! Clean residual min=-0.003829 max=0.003108 Jy/beam ! Clean residual mean=0.000000 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0897122 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 0.0897121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099714Jy sigma=0.000674 ! Fit after self-cal, rms=0.099651Jy sigma=0.000673 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.985 mas, bpa=-5.684 degrees ! Estimated noise=633.757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571293 Jy ! Component: 100 - total flux cleaned = 0.00935597 Jy ! Component: 150 - total flux cleaned = 0.0119012 Jy ! Component: 200 - total flux cleaned = 0.013734 Jy ! Total flux subtracted in 200 components = 0.013734 Jy ! Clean residual min=-0.002621 max=0.002423 Jy/beam ! Clean residual mean=0.000002 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.103446 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 79 components and 0.103446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099215Jy sigma=0.000671 ! Fit after self-cal, rms=0.099173Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.02 KP 1.09 ! LA 1.03 MK 0.96 NL 0.89 OV 1.06 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.03 KP 1.02 ! LA 0.97 MK 1.02 NL 1.07 OV 1.11 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.00 KP 0.90 ! LA 0.79 MK 1.04 NL 1.17 OV 0.95 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.91 KP 1.00* ! LA 0.72 MK 1.20 NL 1.00* OV 1.10 ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.099173Jy sigma=0.000670 ! Fit after self-cal, rms=0.095643Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.088 mas, bpa=-5.655 degrees ! Estimated noise=633.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165674 Jy ! Component: 100 - total flux cleaned = 0.00191345 Jy ! Component: 150 - total flux cleaned = 0.00206432 Jy ! Component: 200 - total flux cleaned = 0.0020907 Jy ! Total flux subtracted in 200 components = 0.0020907 Jy ! Clean residual min=-0.001884 max=0.002054 Jy/beam ! Clean residual mean=-0.000000 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.105537 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.105537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095609Jy sigma=0.000667 ! Fit after self-cal, rms=0.095513Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095513Jy sigma=0.000666 ! Fit after self-cal, rms=0.094847Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.084 mas, bpa=-5.596 degrees ! Estimated noise=633.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000996744 Jy ! Component: 100 - total flux cleaned = 0.000998753 Jy ! Component: 150 - total flux cleaned = 0.000976922 Jy ! Component: 200 - total flux cleaned = 0.000936466 Jy ! Total flux subtracted in 200 components = 0.000936466 Jy ! Clean residual min=-0.001773 max=0.002042 Jy/beam ! Clean residual mean=-0.000003 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.106473 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.106473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094827Jy sigma=0.000665 ! Fit after self-cal, rms=0.094846Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (115.5, -28.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112416 Jy ! Component: 100 - total flux cleaned = 0.00130974 Jy ! Component: 150 - total flux cleaned = 0.00134448 Jy ! Component: 200 - total flux cleaned = 0.00137489 Jy ! Total flux subtracted in 200 components = 0.00137489 Jy ! Clean residual min=-0.001607 max=0.001646 Jy/beam ! Clean residual mean=-0.000002 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.107848 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 121 components and 0.107848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094798Jy sigma=0.000664 ! Fit after self-cal, rms=0.094780Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094780Jy sigma=0.000664 ! Fit after self-cal, rms=0.094706Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.083 mas, bpa=-5.666 degrees ! Estimated noise=633.041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811583 Jy ! Component: 100 - total flux cleaned = 0.000919892 Jy ! Component: 150 - total flux cleaned = 0.000920791 Jy ! Component: 200 - total flux cleaned = 0.000975931 Jy ! Total flux subtracted in 200 components = 0.000975931 Jy ! Clean residual min=-0.001527 max=0.001620 Jy/beam ! Clean residual mean=-0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.108824 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.108824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094679Jy sigma=0.000664 ! Fit after self-cal, rms=0.094681Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178257 Jy ! Component: 100 - total flux cleaned = 0.000178152 Jy ! Component: 150 - total flux cleaned = 0.000153472 Jy ! Component: 200 - total flux cleaned = 0.000131792 Jy ! Total flux subtracted in 200 components = 0.000131792 Jy ! Clean residual min=-0.001505 max=0.001629 Jy/beam ! Clean residual mean=-0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.108956 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.108956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094664Jy sigma=0.000663 ! Fit after self-cal, rms=0.094657Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094657Jy sigma=0.000663 ! Fit after self-cal, rms=0.094770Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=13.84 mas, bpa=1.349 degrees ! Estimated noise=794.374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811689 Jy ! Component: 100 - total flux cleaned = 0.000924757 Jy ! Component: 150 - total flux cleaned = 0.00100044 Jy ! Component: 200 - total flux cleaned = 0.00101514 Jy ! Total flux subtracted in 200 components = 0.00101514 Jy ! Clean residual min=-0.001646 max=0.001960 Jy/beam ! Clean residual mean=-0.000002 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.109971 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.109971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094761Jy sigma=0.000663 ! Fit after self-cal, rms=0.094761Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.75572e-05 Jy ! Component: 100 - total flux cleaned = 0.000122265 Jy ! Component: 150 - total flux cleaned = 9.28343e-05 Jy ! Component: 200 - total flux cleaned = 5.28492e-05 Jy ! Total flux subtracted in 200 components = 5.28492e-05 Jy ! Clean residual min=-0.001608 max=0.001895 Jy/beam ! Clean residual mean=-0.000002 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.110024 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 159 components and 0.110024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094756Jy sigma=0.000663 ! Fit after self-cal, rms=0.094751Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.082 mas, bpa=-5.7 degrees ! Estimated noise=632.978 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 8.082 at -5.7 degrees (North through East) ! Clean map min=-0.0015751 max=0.058561 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=7.022 mas, bpa=-4.623 degrees ! Estimated noise=945.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484362 Jy ! Component: 100 - total flux cleaned = 0.0670929 Jy ! Component: 150 - total flux cleaned = 0.0783006 Jy ! Component: 200 - total flux cleaned = 0.0855315 Jy ! Total flux subtracted in 200 components = 0.0855315 Jy ! Clean residual min=-0.003011 max=0.004355 Jy/beam ! Clean residual mean=-0.000002 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0855315 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0855315 Jy ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.082 mas, bpa=-5.7 degrees ! Estimated noise=632.978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075738 Jy ! Component: 100 - total flux cleaned = 0.0124995 Jy ! Component: 150 - total flux cleaned = 0.0160864 Jy ! Component: 200 - total flux cleaned = 0.0181761 Jy ! Total flux subtracted in 200 components = 0.0181761 Jy ! Clean residual min=-0.002145 max=0.002265 Jy/beam ! Clean residual mean=-0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.103708 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 79 components and 0.103708 Jy ! Inverting map ! Added new window around map position (-37, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015955 Jy ! Component: 100 - total flux cleaned = 0.00251733 Jy ! Component: 150 - total flux cleaned = 0.0033619 Jy ! Component: 200 - total flux cleaned = 0.00387027 Jy ! Total flux subtracted in 200 components = 0.00387027 Jy ! Clean residual min=-0.001769 max=0.001723 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.107578 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 103 components and 0.107578 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=13.84 mas, bpa=1.349 degrees ! Estimated noise=794.374 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136791 Jy ! Component: 100 - total flux cleaned = 0.0017645 Jy ! Component: 150 - total flux cleaned = 0.00180984 Jy ! Component: 200 - total flux cleaned = 0.00184358 Jy ! Total flux subtracted in 200 components = 0.00184358 Jy ! Clean residual min=-0.001804 max=0.001857 Jy/beam ! Clean residual mean=-0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.109421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02377e-05 Jy ! Component: 100 - total flux cleaned = 5.65516e-05 Jy ! Component: 150 - total flux cleaned = 8.10355e-05 Jy ! Component: 200 - total flux cleaned = 0.000125231 Jy ! Total flux subtracted in 200 components = 0.000125231 Jy ! Clean residual min=-0.001720 max=0.001772 Jy/beam ! Clean residual mean=-0.000002 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.109547 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 152 components and 0.109547 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.082 mas, bpa=-5.7 degrees ! Estimated noise=632.978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135197 Jy ! Component: 100 - total flux cleaned = -6.01782e-05 Jy ! Component: 150 - total flux cleaned = 4.88756e-06 Jy ! Component: 200 - total flux cleaned = 6.44092e-06 Jy ! Total flux subtracted in 200 components = 6.44092e-06 Jy ! Clean residual min=-0.001503 max=0.001561 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.109553 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 171 components and 0.109553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094748Jy sigma=0.000663 ! Fit after self-cal, rms=0.094720Jy sigma=0.000663 wmodel J2103-0933_S_2017_03_23_pus_map.mod ! Writing 171 model components to file: J2103-0933_S_2017_03_23_pus_map.mod wobs J2103-0933_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2103-0933_S_2017_03_23_pus_uvs.fits wwins J2103-0933_S_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J2103-0933_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117993 Jy ! Component: 100 - total flux cleaned = 1.44962e-05 Jy ! Component: 150 - total flux cleaned = 0.000167346 Jy ! Component: 200 - total flux cleaned = 0.000290558 Jy ! Component: 250 - total flux cleaned = 0.000338577 Jy ! Component: 300 - total flux cleaned = 0.000455867 Jy ! Component: 350 - total flux cleaned = 0.00050185 Jy ! Component: 400 - total flux cleaned = 0.000524442 Jy ! Component: 450 - total flux cleaned = 0.000590418 Jy ! Component: 500 - total flux cleaned = 0.000633241 Jy ! Component: 550 - total flux cleaned = 0.000612099 Jy ! Component: 600 - total flux cleaned = 0.000653486 Jy ! Component: 650 - total flux cleaned = 0.000694124 Jy ! Component: 700 - total flux cleaned = 0.000713906 Jy ! Component: 750 - total flux cleaned = 0.00073391 Jy ! Component: 800 - total flux cleaned = 0.000791712 Jy ! Component: 850 - total flux cleaned = 0.000791836 Jy ! Component: 900 - total flux cleaned = 0.000810439 Jy ! Component: 950 - total flux cleaned = 0.0007919 Jy ! Component: 1000 - total flux cleaned = 0.000773824 Jy ! Component: 1050 - total flux cleaned = 0.000809359 Jy ! Component: 1100 - total flux cleaned = 0.000791944 Jy ! Component: 1150 - total flux cleaned = 0.000844235 Jy ! Component: 1200 - total flux cleaned = 0.000929478 Jy ! Component: 1250 - total flux cleaned = 0.000963274 Jy ! Component: 1300 - total flux cleaned = 0.00101312 Jy ! Component: 1350 - total flux cleaned = 0.00102926 Jy ! Component: 1400 - total flux cleaned = 0.00107811 Jy ! Component: 1450 - total flux cleaned = 0.00114224 Jy ! Component: 1500 - total flux cleaned = 0.00119008 Jy ! Component: 1550 - total flux cleaned = 0.00125285 Jy ! Component: 1600 - total flux cleaned = 0.00128377 Jy ! Component: 1650 - total flux cleaned = 0.0012685 Jy ! Component: 1700 - total flux cleaned = 0.00128373 Jy ! Component: 1750 - total flux cleaned = 0.00126872 Jy ! Component: 1800 - total flux cleaned = 0.00132806 Jy ! Component: 1850 - total flux cleaned = 0.00134271 Jy ! Component: 1900 - total flux cleaned = 0.00135714 Jy ! Component: 1950 - total flux cleaned = 0.00137154 Jy ! Component: 2000 - total flux cleaned = 0.00132871 Jy ! Component: 2050 - total flux cleaned = 0.00135702 Jy ! Component: 2100 - total flux cleaned = 0.0013293 Jy ! Component: 2150 - total flux cleaned = 0.00130181 Jy ! Component: 2200 - total flux cleaned = 0.00131557 Jy ! Component: 2250 - total flux cleaned = 0.00130199 Jy ! Component: 2300 - total flux cleaned = 0.00127524 Jy ! Component: 2350 - total flux cleaned = 0.0012618 Jy ! Component: 2400 - total flux cleaned = 0.00126198 Jy ! Component: 2450 - total flux cleaned = 0.00122258 Jy ! Component: 2500 - total flux cleaned = 0.00114485 Jy ! Component: 2550 - total flux cleaned = 0.00117073 Jy ! Component: 2600 - total flux cleaned = 0.00115795 Jy ! Component: 2650 - total flux cleaned = 0.00114528 Jy ! Component: 2700 - total flux cleaned = 0.00112019 Jy ! Component: 2750 - total flux cleaned = 0.00105771 Jy ! Component: 2800 - total flux cleaned = 0.00103291 Jy ! Component: 2850 - total flux cleaned = 0.000983928 Jy ! Component: 2900 - total flux cleaned = 0.000984058 Jy ! Component: 2950 - total flux cleaned = 0.000948073 Jy ! Component: 3000 - total flux cleaned = 0.000912088 Jy ! Component: 3050 - total flux cleaned = 0.000840906 Jy ! Component: 3100 - total flux cleaned = 0.000888153 Jy ! Component: 3150 - total flux cleaned = 0.000852892 Jy ! Component: 3200 - total flux cleaned = 0.000806371 Jy ! Component: 3250 - total flux cleaned = 0.000748653 Jy ! Component: 3300 - total flux cleaned = 0.000714241 Jy ! Component: 3350 - total flux cleaned = 0.000714295 Jy ! Component: 3400 - total flux cleaned = 0.000657631 Jy ! Component: 3450 - total flux cleaned = 0.00064611 Jy ! Component: 3500 - total flux cleaned = 0.000567947 Jy ! Component: 3550 - total flux cleaned = 0.000523438 Jy ! Component: 3600 - total flux cleaned = 0.000479405 Jy ! Component: 3650 - total flux cleaned = 0.000468295 Jy ! Component: 3700 - total flux cleaned = 0.000392122 Jy ! Component: 3750 - total flux cleaned = 0.000402883 Jy ! Component: 3800 - total flux cleaned = 0.000338253 Jy ! Component: 3850 - total flux cleaned = 0.0003169 Jy ! Component: 3900 - total flux cleaned = 0.000274409 Jy ! Component: 3950 - total flux cleaned = 0.000221463 Jy ! Component: 4000 - total flux cleaned = 0.000189911 Jy ! Component: 4050 - total flux cleaned = 0.0001167 Jy ! Total flux subtracted in 4096 components = 0.000106314 Jy ! Clean residual min=-0.000673 max=0.000564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.10966 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 486 components and 0.10966 Jy ![Exited script file: muppet] wmap "J2103-0933_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 8.082 at -5.7 degrees (North through East) ! Clean map min=-0.0014063 max=0.058241 Jy/beam ! Writing clean map to FITS file: J2103-0933_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0582406 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194062 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.999623 0.999623 1.99925 3.99849 7.99699 15.994 31.9879 63.9759 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.187 x 8.082 at -5.7 degrees (North through East) ! Clean map min=-0.0014063 max=0.058241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2103-0933_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:08:49 2019