! Started logfile: J2102+6015_S_2017_05_01_pus_uvs.log on Wed May 1 18:43:45 2019 obs J2102+6015_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2102+6015_S_2017_05_01_pus_uva.fits ! AN table 1: 230 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975845 visibilities/baseline/integration-bin. ! Found source: J2102+6015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 40400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2102+6015_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 950 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.830620Jy sigma=0.006846 ! Fit after self-cal, rms=0.810159Jy sigma=0.006696 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.335 mas, bmaj=3.931 mas, bpa=4.886 degrees ! Estimated noise=909.032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14711 Jy ! Component: 100 - total flux cleaned = 0.211686 Jy ! Total flux subtracted in 100 components = 0.211686 Jy ! Clean residual min=-0.009007 max=0.031500 Jy/beam ! Clean residual mean=-0.000022 rms=0.002863 Jy/beam ! Combined flux in latest and established models = 0.211686 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.211686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171670Jy sigma=0.000946 ! Fit after self-cal, rms=0.171410Jy sigma=0.000943 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379861 Jy ! Component: 100 - total flux cleaned = 0.0628665 Jy ! Total flux subtracted in 100 components = 0.0628665 Jy ! Clean residual min=-0.005572 max=0.014967 Jy/beam ! Clean residual mean=-0.000015 rms=0.001594 Jy/beam ! Combined flux in latest and established models = 0.274553 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 58 components and 0.274553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157427Jy sigma=0.000759 ! Fit after self-cal, rms=0.157457Jy sigma=0.000758 ! Inverting map ! Added new window around map position (4, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179759 Jy ! Component: 100 - total flux cleaned = 0.030895 Jy ! Total flux subtracted in 100 components = 0.030895 Jy ! Clean residual min=-0.004149 max=0.010212 Jy/beam ! Clean residual mean=-0.000011 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.305448 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.305448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153780Jy sigma=0.000710 ! Fit after self-cal, rms=0.153762Jy sigma=0.000709 ! Inverting map ! Added new window around map position (-5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103087 Jy ! Component: 100 - total flux cleaned = 0.0176985 Jy ! Total flux subtracted in 100 components = 0.0176985 Jy ! Clean residual min=-0.003641 max=0.004257 Jy/beam ! Clean residual mean=-0.000008 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.323146 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.323146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152429Jy sigma=0.000694 ! Fit after self-cal, rms=0.152408Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.111 mas, bmaj=4.736 mas, bpa=4.754 degrees ! Estimated noise=471.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00854484 Jy ! Component: 100 - total flux cleaned = 0.0142206 Jy ! Component: 150 - total flux cleaned = 0.0181944 Jy ! Component: 200 - total flux cleaned = 0.0211045 Jy ! Total flux subtracted in 200 components = 0.0211045 Jy ! Clean residual min=-0.002753 max=0.003284 Jy/beam ! Clean residual mean=-0.000009 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.344251 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 109 components and 0.344251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151672Jy sigma=0.000686 ! Fit after self-cal, rms=0.151656Jy sigma=0.000686 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 1.05 KP 1.01 ! LA 0.98 MK 1.15 NL 0.98 OV 1.03 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.11 KP 0.97 ! LA 0.95 MK 1.02 NL 1.02 OV 1.08 ! PT 0.98 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.07 KP 0.99 ! LA 1.01 MK 1.05 NL 1.01 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.97 KP 1.00* ! LA 0.85 MK 0.88 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.151656Jy sigma=0.000686 ! Fit after self-cal, rms=0.149121Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=4.767 mas, bpa=6.86 degrees ! Estimated noise=475.408 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135364 Jy ! Component: 100 - total flux cleaned = 0.00177076 Jy ! Component: 150 - total flux cleaned = 0.00202614 Jy ! Component: 200 - total flux cleaned = 0.00209708 Jy ! Total flux subtracted in 200 components = 0.00209708 Jy ! Clean residual min=-0.001987 max=0.002277 Jy/beam ! Clean residual mean=-0.000009 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.346348 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.346348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149059Jy sigma=0.000677 ! Fit after self-cal, rms=0.149045Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149045Jy sigma=0.000677 ! Fit after self-cal, rms=0.125123Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.109 mas, bmaj=4.801 mas, bpa=7.131 degrees ! Estimated noise=476.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110766 Jy ! Component: 100 - total flux cleaned = 0.00124269 Jy ! Component: 150 - total flux cleaned = 0.00130684 Jy ! Component: 200 - total flux cleaned = 0.00138267 Jy ! Total flux subtracted in 200 components = 0.00138267 Jy ! Clean residual min=-0.001435 max=0.001439 Jy/beam ! Clean residual mean=-0.000008 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.347731 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 131 components and 0.347731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125111Jy sigma=0.000670 ! Fit after self-cal, rms=0.125025Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133277 Jy ! Component: 100 - total flux cleaned = 0.000133315 Jy ! Component: 150 - total flux cleaned = 0.000133108 Jy ! Component: 200 - total flux cleaned = 0.000119187 Jy ! Total flux subtracted in 200 components = 0.000119187 Jy ! Clean residual min=-0.001405 max=0.001320 Jy/beam ! Clean residual mean=-0.000008 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.34785 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 139 components and 0.34785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125019Jy sigma=0.000670 ! Fit after self-cal, rms=0.125020Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125020Jy sigma=0.000670 ! Fit after self-cal, rms=0.125529Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.11 mas, bmaj=4.807 mas, bpa=7.163 degrees ! Estimated noise=478.052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784501 Jy ! Component: 100 - total flux cleaned = 0.000904743 Jy ! Component: 150 - total flux cleaned = 0.000936987 Jy ! Component: 200 - total flux cleaned = 0.00095159 Jy ! Total flux subtracted in 200 components = 0.00095159 Jy ! Clean residual min=-0.001421 max=0.001384 Jy/beam ! Clean residual mean=-0.000008 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.348801 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 140 components and 0.348801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125511Jy sigma=0.000670 ! Fit after self-cal, rms=0.125509Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.57222e-05 Jy ! Component: 100 - total flux cleaned = 7.8762e-05 Jy ! Component: 150 - total flux cleaned = 7.81815e-05 Jy ! Component: 200 - total flux cleaned = 7.81815e-05 Jy ! Total flux subtracted in 200 components = 7.81815e-05 Jy ! Clean residual min=-0.001403 max=0.001345 Jy/beam ! Clean residual mean=-0.000008 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.34888 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 146 components and 0.34888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125505Jy sigma=0.000670 ! Fit after self-cal, rms=0.125505Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125505Jy sigma=0.000670 ! Fit after self-cal, rms=0.126269Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.338 mas, bmaj=8.754 mas, bpa=49.71 degrees ! Estimated noise=576.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107343 Jy ! Component: 100 - total flux cleaned = 0.00132885 Jy ! Component: 150 - total flux cleaned = 0.00143979 Jy ! Component: 200 - total flux cleaned = 0.00147239 Jy ! Total flux subtracted in 200 components = 0.00147239 Jy ! Clean residual min=-0.001396 max=0.001598 Jy/beam ! Clean residual mean=-0.000016 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.350352 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 155 components and 0.350352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126279Jy sigma=0.000670 ! Fit after self-cal, rms=0.126281Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.72789e-05 Jy ! Component: 100 - total flux cleaned = 3.72543e-05 Jy ! Component: 150 - total flux cleaned = 4.62223e-05 Jy ! Component: 200 - total flux cleaned = 5.45545e-05 Jy ! Total flux subtracted in 200 components = 5.45545e-05 Jy ! Clean residual min=-0.001389 max=0.001608 Jy/beam ! Clean residual mean=-0.000016 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.350407 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 158 components and 0.350407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126281Jy sigma=0.000670 ! Fit after self-cal, rms=0.126279Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=4.812 mas, bpa=7.128 degrees ! Estimated noise=479.605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 4.812 at 7.128 degrees (North through East) ! Clean map min=-0.001325 max=0.18996 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=3.975 mas, bpa=6.801 degrees ! Estimated noise=928.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150543 Jy ! Component: 100 - total flux cleaned = 0.216624 Jy ! Component: 150 - total flux cleaned = 0.254009 Jy ! Component: 200 - total flux cleaned = 0.278535 Jy ! Total flux subtracted in 200 components = 0.278535 Jy ! Clean residual min=-0.005112 max=0.013546 Jy/beam ! Clean residual mean=-0.000014 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.278535 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 0.278535 Jy ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=4.812 mas, bpa=7.128 degrees ! Estimated noise=479.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024844 Jy ! Component: 100 - total flux cleaned = 0.0398034 Jy ! Component: 150 - total flux cleaned = 0.0494645 Jy ! Component: 200 - total flux cleaned = 0.0559797 Jy ! Total flux subtracted in 200 components = 0.0559797 Jy ! Clean residual min=-0.001868 max=0.004099 Jy/beam ! Clean residual mean=-0.000020 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.334515 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 94 components and 0.334515 Jy ! Inverting map ! Added new window around map position (-9.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466224 Jy ! Component: 100 - total flux cleaned = 0.00798302 Jy ! Component: 150 - total flux cleaned = 0.0104277 Jy ! Component: 200 - total flux cleaned = 0.0122654 Jy ! Total flux subtracted in 200 components = 0.0122654 Jy ! Clean residual min=-0.001440 max=0.001304 Jy/beam ! Clean residual mean=-0.000011 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.34678 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 121 components and 0.34678 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.338 mas, bmaj=8.754 mas, bpa=49.71 degrees ! Estimated noise=576.054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192462 Jy ! Component: 100 - total flux cleaned = 0.00308941 Jy ! Component: 150 - total flux cleaned = 0.00383862 Jy ! Component: 200 - total flux cleaned = 0.00432766 Jy ! Total flux subtracted in 200 components = 0.00432766 Jy ! Clean residual min=-0.001300 max=0.001484 Jy/beam ! Clean residual mean=-0.000016 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.351108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290995 Jy ! Component: 100 - total flux cleaned = 0.000373366 Jy ! Component: 150 - total flux cleaned = 0.000446561 Jy ! Component: 200 - total flux cleaned = 0.000487707 Jy ! Total flux subtracted in 200 components = 0.000487707 Jy ! Clean residual min=-0.001284 max=0.001469 Jy/beam ! Clean residual mean=-0.000015 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.351595 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 175 components and 0.351595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=4.812 mas, bpa=7.128 degrees ! Estimated noise=479.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.24388e-05 Jy ! Component: 100 - total flux cleaned = 0.00016942 Jy ! Component: 150 - total flux cleaned = 0.000214573 Jy ! Component: 200 - total flux cleaned = 0.000235106 Jy ! Total flux subtracted in 200 components = 0.000235106 Jy ! Clean residual min=-0.001362 max=0.001256 Jy/beam ! Clean residual mean=-0.000007 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.35183 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 182 components and 0.35183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126236Jy sigma=0.000670 ! Fit after self-cal, rms=0.126203Jy sigma=0.000670 wmodel J2102+6015_S_2017_05_01_pus_map.mod ! Writing 182 model components to file: J2102+6015_S_2017_05_01_pus_map.mod wobs J2102+6015_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2102+6015_S_2017_05_01_pus_uvs.fits wwins J2102+6015_S_2017_05_01_pus_map.win ! wwins: Wrote 4 windows to J2102+6015_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473909 Jy ! Component: 100 - total flux cleaned = -0.000822162 Jy ! Component: 150 - total flux cleaned = -0.00106954 Jy ! Component: 200 - total flux cleaned = -0.00124389 Jy ! Component: 250 - total flux cleaned = -0.00137096 Jy ! Component: 300 - total flux cleaned = -0.0014122 Jy ! Component: 350 - total flux cleaned = -0.00145245 Jy ! Component: 400 - total flux cleaned = -0.00151174 Jy ! Component: 450 - total flux cleaned = -0.00155052 Jy ! Component: 500 - total flux cleaned = -0.0015693 Jy ! Component: 550 - total flux cleaned = -0.00153125 Jy ! Component: 600 - total flux cleaned = -0.00154949 Jy ! Component: 650 - total flux cleaned = -0.00151284 Jy ! Component: 700 - total flux cleaned = -0.00160346 Jy ! Component: 750 - total flux cleaned = -0.00165708 Jy ! Component: 800 - total flux cleaned = -0.0016927 Jy ! Component: 850 - total flux cleaned = -0.0018327 Jy ! Component: 900 - total flux cleaned = -0.00185004 Jy ! Component: 950 - total flux cleaned = -0.00191821 Jy ! Component: 1000 - total flux cleaned = -0.00195199 Jy ! Component: 1050 - total flux cleaned = -0.00200231 Jy ! Component: 1100 - total flux cleaned = -0.00201907 Jy ! Component: 1150 - total flux cleaned = -0.00206865 Jy ! Component: 1200 - total flux cleaned = -0.0021012 Jy ! Component: 1250 - total flux cleaned = -0.00216585 Jy ! Component: 1300 - total flux cleaned = -0.00219798 Jy ! Component: 1350 - total flux cleaned = -0.0022773 Jy ! Component: 1400 - total flux cleaned = -0.00238715 Jy ! Component: 1450 - total flux cleaned = -0.00235597 Jy ! Component: 1500 - total flux cleaned = -0.0024486 Jy ! Component: 1550 - total flux cleaned = -0.00244865 Jy ! Component: 1600 - total flux cleaned = -0.00252462 Jy ! Component: 1650 - total flux cleaned = -0.00264532 Jy ! Component: 1700 - total flux cleaned = -0.00258528 Jy ! Component: 1750 - total flux cleaned = -0.00263013 Jy ! Component: 1800 - total flux cleaned = -0.0027629 Jy ! Component: 1850 - total flux cleaned = -0.00274814 Jy ! Component: 1900 - total flux cleaned = -0.00280634 Jy ! Component: 1950 - total flux cleaned = -0.00286397 Jy ! Component: 2000 - total flux cleaned = -0.00292147 Jy ! Component: 2050 - total flux cleaned = -0.00297838 Jy ! Component: 2100 - total flux cleaned = -0.00297824 Jy ! Component: 2150 - total flux cleaned = -0.00304863 Jy ! Component: 2200 - total flux cleaned = -0.00307643 Jy ! Component: 2250 - total flux cleaned = -0.00306249 Jy ! Component: 2300 - total flux cleaned = -0.00315919 Jy ! Component: 2350 - total flux cleaned = -0.00322791 Jy ! Component: 2400 - total flux cleaned = -0.00326882 Jy ! Component: 2450 - total flux cleaned = -0.00330958 Jy ! Component: 2500 - total flux cleaned = -0.00333657 Jy ! Component: 2550 - total flux cleaned = -0.00337665 Jy ! Component: 2600 - total flux cleaned = -0.00340329 Jy ! Component: 2650 - total flux cleaned = -0.00346943 Jy ! Component: 2700 - total flux cleaned = -0.00345628 Jy ! Component: 2750 - total flux cleaned = -0.00348255 Jy ! Component: 2800 - total flux cleaned = -0.00356097 Jy ! Component: 2850 - total flux cleaned = -0.00362581 Jy ! Component: 2900 - total flux cleaned = -0.0036645 Jy ! Component: 2950 - total flux cleaned = -0.00372873 Jy ! Component: 3000 - total flux cleaned = -0.00374144 Jy ! Component: 3050 - total flux cleaned = -0.00377968 Jy ! Component: 3100 - total flux cleaned = -0.00377962 Jy ! Component: 3150 - total flux cleaned = -0.00388038 Jy ! Component: 3200 - total flux cleaned = -0.00391794 Jy ! Component: 3250 - total flux cleaned = -0.00394286 Jy ! Component: 3300 - total flux cleaned = -0.00399253 Jy ! Component: 3350 - total flux cleaned = -0.00405431 Jy ! Component: 3400 - total flux cleaned = -0.004042 Jy ! Component: 3450 - total flux cleaned = -0.00409097 Jy ! Component: 3500 - total flux cleaned = -0.00406664 Jy ! Component: 3550 - total flux cleaned = -0.00418798 Jy ! Component: 3600 - total flux cleaned = -0.00415179 Jy ! Component: 3650 - total flux cleaned = -0.00412773 Jy ! Component: 3700 - total flux cleaned = -0.00418765 Jy ! Component: 3750 - total flux cleaned = -0.00424728 Jy ! Component: 3800 - total flux cleaned = -0.00427091 Jy ! Component: 3850 - total flux cleaned = -0.00427095 Jy ! Component: 3900 - total flux cleaned = -0.00425922 Jy ! Component: 3950 - total flux cleaned = -0.00431784 Jy ! Component: 4000 - total flux cleaned = -0.00435281 Jy ! Component: 4050 - total flux cleaned = -0.00432961 Jy ! Total flux subtracted in 4096 components = -0.00436434 Jy ! Clean residual min=-0.000727 max=0.000703 Jy/beam ! Clean residual mean=-0.000003 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.347466 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 480 components and 0.347466 Jy ![Exited script file: muppet] wmap "J2102+6015_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 4.812 at 7.128 degrees (North through East) ! Clean map min=-0.001145 max=0.19041 Jy/beam ! Writing clean map to FITS file: J2102+6015_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.19041 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214194 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.337472 0.337472 0.674945 1.34989 2.69978 5.39956 10.7991 21.5982 43.1965 86.3929 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.19 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 4.812 at 7.128 degrees (North through East) ! Clean map min=-0.001145 max=0.19041 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2102+6015_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:43:51 2019