! Started logfile: J2102+4702_S_2017_01_21_pus_uvs.log on Sun May 5 16:03:12 2019 obs J2102+4702_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2102+4702_S_2017_01_21_pus_uva.fits ! AN table 1: 219 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.719305 visibilities/baseline/integration-bin. ! Found source: J2102+4702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 22684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2102+4702_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 501 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 812 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987619Jy sigma=0.007516 ! Fit after self-cal, rms=0.948266Jy sigma=0.007261 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.003 mas, bmaj=3.92 mas, bpa=-5.769 degrees ! Estimated noise=1237.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418444 Jy ! Component: 100 - total flux cleaned = 0.0516457 Jy ! Total flux subtracted in 100 components = 0.0516457 Jy ! Clean residual min=-0.004036 max=0.004259 Jy/beam ! Clean residual mean=-0.000010 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 0.0516457 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0516457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099836Jy sigma=0.000637 ! Fit after self-cal, rms=0.099108Jy sigma=0.000632 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.599 mas, bmaj=4.693 mas, bpa=-6.778 degrees ! Estimated noise=687.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574746 Jy ! Component: 100 - total flux cleaned = 0.0087327 Jy ! Component: 150 - total flux cleaned = 0.0105028 Jy ! Component: 200 - total flux cleaned = 0.0115896 Jy ! Total flux subtracted in 200 components = 0.0115896 Jy ! Clean residual min=-0.002478 max=0.002367 Jy/beam ! Clean residual mean=-0.000009 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0632353 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 45 components and 0.0632353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098661Jy sigma=0.000629 ! Fit after self-cal, rms=0.098658Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.10 LA 0.97 ! MK 1.01 NL 1.01 OV 1.03 PT 1.01 ! SC 1.09 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.13 LA 1.00 ! MK 0.97 NL 0.98 OV 0.96 PT 1.01 ! SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.14 HN 1.06 LA 0.95 ! MK 1.04 NL 0.96 OV 0.95 PT 1.16 ! SC 1.21 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.08 HN 0.99 LA 0.98 ! MK 0.80 NL 1.00* OV 0.90 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.098658Jy sigma=0.000629 ! Fit after self-cal, rms=0.096799Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=4.738 mas, bpa=-9.509 degrees ! Estimated noise=693.904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013889 Jy ! Component: 100 - total flux cleaned = 0.00184826 Jy ! Component: 150 - total flux cleaned = 0.00199285 Jy ! Component: 200 - total flux cleaned = 0.0020905 Jy ! Total flux subtracted in 200 components = 0.0020905 Jy ! Clean residual min=-0.002241 max=0.002006 Jy/beam ! Clean residual mean=-0.000017 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0653258 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0653258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096769Jy sigma=0.000627 ! Fit after self-cal, rms=0.096696Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096696Jy sigma=0.000627 ! Fit after self-cal, rms=0.091809Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=4.762 mas, bpa=-9.115 degrees ! Estimated noise=692.728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613296 Jy ! Component: 100 - total flux cleaned = 0.000663321 Jy ! Component: 150 - total flux cleaned = 0.000691546 Jy ! Component: 200 - total flux cleaned = 0.000715921 Jy ! Total flux subtracted in 200 components = 0.000715921 Jy ! Clean residual min=-0.002099 max=0.001483 Jy/beam ! Clean residual mean=-0.000007 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0660417 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0660417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091802Jy sigma=0.000625 ! Fit after self-cal, rms=0.091687Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405505 Jy ! Component: 100 - total flux cleaned = 0.000427218 Jy ! Component: 150 - total flux cleaned = 0.000437488 Jy ! Component: 200 - total flux cleaned = 0.000447137 Jy ! Total flux subtracted in 200 components = 0.000447137 Jy ! Clean residual min=-0.002125 max=0.001528 Jy/beam ! Clean residual mean=-0.000006 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0664889 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.0664889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091683Jy sigma=0.000625 ! Fit after self-cal, rms=0.091690Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091690Jy sigma=0.000625 ! Fit after self-cal, rms=0.091181Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=4.757 mas, bpa=-8.753 degrees ! Estimated noise=691.364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491101 Jy ! Component: 100 - total flux cleaned = 0.000561735 Jy ! Component: 150 - total flux cleaned = 0.000584913 Jy ! Component: 200 - total flux cleaned = 0.000594803 Jy ! Total flux subtracted in 200 components = 0.000594803 Jy ! Clean residual min=-0.002115 max=0.001529 Jy/beam ! Clean residual mean=-0.000006 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0670837 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.0670837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091177Jy sigma=0.000625 ! Fit after self-cal, rms=0.091157Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159544 Jy ! Component: 100 - total flux cleaned = 0.000148885 Jy ! Component: 150 - total flux cleaned = 0.000148959 Jy ! Component: 200 - total flux cleaned = 0.000157533 Jy ! Total flux subtracted in 200 components = 0.000157533 Jy ! Clean residual min=-0.002125 max=0.001522 Jy/beam ! Clean residual mean=-0.000006 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0672412 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.0672412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091154Jy sigma=0.000625 ! Fit after self-cal, rms=0.091144Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091144Jy sigma=0.000625 ! Fit after self-cal, rms=0.090851Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.707 mas, bmaj=8.491 mas, bpa=35.75 degrees ! Estimated noise=892.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061418 Jy ! Component: 100 - total flux cleaned = 0.000793503 Jy ! Component: 150 - total flux cleaned = 0.000816928 Jy ! Component: 200 - total flux cleaned = 0.000844467 Jy ! Total flux subtracted in 200 components = 0.000844467 Jy ! Clean residual min=-0.002381 max=0.002097 Jy/beam ! Clean residual mean=-0.000014 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0680856 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.0680856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090853Jy sigma=0.000624 ! Fit after self-cal, rms=0.090847Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131842 Jy ! Component: 100 - total flux cleaned = 0.000147808 Jy ! Component: 150 - total flux cleaned = 0.000161262 Jy ! Component: 200 - total flux cleaned = 0.000173339 Jy ! Total flux subtracted in 200 components = 0.000173339 Jy ! Clean residual min=-0.002408 max=0.002113 Jy/beam ! Clean residual mean=-0.000013 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.068259 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 74 components and 0.068259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090849Jy sigma=0.000624 ! Fit after self-cal, rms=0.090849Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=4.745 mas, bpa=-8.47 degrees ! Estimated noise=689.825 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 4.745 at -8.47 degrees (North through East) ! Clean map min=-0.0020831 max=0.05471 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=3.966 mas, bpa=-8.33 degrees ! Estimated noise=1230 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420652 Jy ! Component: 100 - total flux cleaned = 0.052711 Jy ! Component: 150 - total flux cleaned = 0.0580155 Jy ! Component: 200 - total flux cleaned = 0.0612805 Jy ! Total flux subtracted in 200 components = 0.0612805 Jy ! Clean residual min=-0.004424 max=0.003396 Jy/beam ! Clean residual mean=-0.000008 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.0612804 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0612804 Jy ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=4.745 mas, bpa=-8.47 degrees ! Estimated noise=689.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289616 Jy ! Component: 100 - total flux cleaned = 0.00453463 Jy ! Component: 150 - total flux cleaned = 0.00552887 Jy ! Component: 200 - total flux cleaned = 0.00614475 Jy ! Total flux subtracted in 200 components = 0.00614475 Jy ! Clean residual min=-0.002216 max=0.001559 Jy/beam ! Clean residual mean=-0.000007 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0674252 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.0674252 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.707 mas, bmaj=8.491 mas, bpa=35.75 degrees ! Estimated noise=892.097 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699278 Jy ! Component: 100 - total flux cleaned = 0.000916226 Jy ! Component: 150 - total flux cleaned = 0.000916291 Jy ! Component: 200 - total flux cleaned = 0.000922058 Jy ! Total flux subtracted in 200 components = 0.000922058 Jy ! Clean residual min=-0.002432 max=0.002102 Jy/beam ! Clean residual mean=-0.000013 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0683472 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07579e-05 Jy ! Component: 100 - total flux cleaned = 1.04621e-05 Jy ! Component: 150 - total flux cleaned = 1.95467e-05 Jy ! Component: 200 - total flux cleaned = 2.41531e-05 Jy ! Total flux subtracted in 200 components = 2.41531e-05 Jy ! Clean residual min=-0.002436 max=0.002097 Jy/beam ! Clean residual mean=-0.000013 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0683714 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0683714 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=4.745 mas, bpa=-8.47 degrees ! Estimated noise=689.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256224 Jy ! Component: 100 - total flux cleaned = -0.00024019 Jy ! Component: 150 - total flux cleaned = -0.000226142 Jy ! Component: 200 - total flux cleaned = -0.00021307 Jy ! Total flux subtracted in 200 components = -0.00021307 Jy ! Clean residual min=-0.002180 max=0.001489 Jy/beam ! Clean residual mean=-0.000006 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0681583 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0681583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090850Jy sigma=0.000624 ! Fit after self-cal, rms=0.090848Jy sigma=0.000624 wmodel J2102+4702_S_2017_01_21_pus_map.mod ! Writing 48 model components to file: J2102+4702_S_2017_01_21_pus_map.mod wobs J2102+4702_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2102+4702_S_2017_01_21_pus_uvs.fits wwins J2102+4702_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2102+4702_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876123 Jy ! Component: 100 - total flux cleaned = -0.00133989 Jy ! Component: 150 - total flux cleaned = -0.00147497 Jy ! Component: 200 - total flux cleaned = -0.00147431 Jy ! Component: 250 - total flux cleaned = -0.00147436 Jy ! Component: 300 - total flux cleaned = -0.00154645 Jy ! Component: 350 - total flux cleaned = -0.00156973 Jy ! Component: 400 - total flux cleaned = -0.00161562 Jy ! Component: 450 - total flux cleaned = -0.00159383 Jy ! Component: 500 - total flux cleaned = -0.00159426 Jy ! Component: 550 - total flux cleaned = -0.00153142 Jy ! Component: 600 - total flux cleaned = -0.00147006 Jy ! Component: 650 - total flux cleaned = -0.00149009 Jy ! Component: 700 - total flux cleaned = -0.00152961 Jy ! Component: 750 - total flux cleaned = -0.00154877 Jy ! Component: 800 - total flux cleaned = -0.00154885 Jy ! Component: 850 - total flux cleaned = -0.00158664 Jy ! Component: 900 - total flux cleaned = -0.00164293 Jy ! Component: 950 - total flux cleaned = -0.00166144 Jy ! Component: 1000 - total flux cleaned = -0.00166165 Jy ! Component: 1050 - total flux cleaned = -0.00171547 Jy ! Component: 1100 - total flux cleaned = -0.00175071 Jy ! Component: 1150 - total flux cleaned = -0.00175077 Jy ! Component: 1200 - total flux cleaned = -0.00176805 Jy ! Component: 1250 - total flux cleaned = -0.00176793 Jy ! Component: 1300 - total flux cleaned = -0.00175145 Jy ! Component: 1350 - total flux cleaned = -0.00178501 Jy ! Component: 1400 - total flux cleaned = -0.00181811 Jy ! Component: 1450 - total flux cleaned = -0.00183428 Jy ! Component: 1500 - total flux cleaned = -0.00177029 Jy ! Component: 1550 - total flux cleaned = -0.00180227 Jy ! Component: 1600 - total flux cleaned = -0.00181815 Jy ! Component: 1650 - total flux cleaned = -0.00178703 Jy ! Component: 1700 - total flux cleaned = -0.00184891 Jy ! Component: 1750 - total flux cleaned = -0.00181824 Jy ! Component: 1800 - total flux cleaned = -0.00180315 Jy ! Component: 1850 - total flux cleaned = -0.00181812 Jy ! Component: 1900 - total flux cleaned = -0.00177378 Jy ! Component: 1950 - total flux cleaned = -0.00180316 Jy ! Component: 2000 - total flux cleaned = -0.00180313 Jy ! Component: 2050 - total flux cleaned = -0.00184643 Jy ! Component: 2100 - total flux cleaned = -0.00184649 Jy ! Component: 2150 - total flux cleaned = -0.00184648 Jy ! Component: 2200 - total flux cleaned = -0.00191657 Jy ! Component: 2250 - total flux cleaned = -0.00193054 Jy ! Component: 2300 - total flux cleaned = -0.00197178 Jy ! Component: 2350 - total flux cleaned = -0.00194452 Jy ! Component: 2400 - total flux cleaned = -0.00197152 Jy ! Component: 2450 - total flux cleaned = -0.00197153 Jy ! Component: 2500 - total flux cleaned = -0.00199826 Jy ! Component: 2550 - total flux cleaned = -0.00205101 Jy ! Component: 2600 - total flux cleaned = -0.00203774 Jy ! Component: 2650 - total flux cleaned = -0.00205072 Jy ! Component: 2700 - total flux cleaned = -0.00211495 Jy ! Component: 2750 - total flux cleaned = -0.00212759 Jy ! Component: 2800 - total flux cleaned = -0.00211491 Jy ! Component: 2850 - total flux cleaned = -0.00213993 Jy ! Component: 2900 - total flux cleaned = -0.0021274 Jy ! Component: 2950 - total flux cleaned = -0.00212739 Jy ! Component: 3000 - total flux cleaned = -0.00215189 Jy ! Component: 3050 - total flux cleaned = -0.00216404 Jy ! Component: 3100 - total flux cleaned = -0.00220043 Jy ! Component: 3150 - total flux cleaned = -0.0022605 Jy ! Component: 3200 - total flux cleaned = -0.0022486 Jy ! Component: 3250 - total flux cleaned = -0.00230791 Jy ! Component: 3300 - total flux cleaned = -0.00233141 Jy ! Component: 3350 - total flux cleaned = -0.00235477 Jy ! Component: 3400 - total flux cleaned = -0.00241275 Jy ! Component: 3450 - total flux cleaned = -0.00238969 Jy ! Component: 3500 - total flux cleaned = -0.002424 Jy ! Component: 3550 - total flux cleaned = -0.00241264 Jy ! Component: 3600 - total flux cleaned = -0.00242398 Jy ! Component: 3650 - total flux cleaned = -0.00245776 Jy ! Component: 3700 - total flux cleaned = -0.00248016 Jy ! Component: 3750 - total flux cleaned = -0.00248027 Jy ! Component: 3800 - total flux cleaned = -0.00250238 Jy ! Component: 3850 - total flux cleaned = -0.00251338 Jy ! Component: 3900 - total flux cleaned = -0.00253526 Jy ! Component: 3950 - total flux cleaned = -0.00257882 Jy ! Component: 4000 - total flux cleaned = -0.00260044 Jy ! Component: 4050 - total flux cleaned = -0.00265419 Jy ! Total flux subtracted in 4096 components = -0.00266483 Jy ! Clean residual min=-0.000635 max=0.000750 Jy/beam ! Clean residual mean=-0.000002 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.0654935 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 326 components and 0.0654935 Jy ![Exited script file: muppet] wmap "J2102+4702_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 4.745 at -8.47 degrees (North through East) ! Clean map min=-0.0018638 max=0.054713 Jy/beam ! Writing clean map to FITS file: J2102+4702_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.054713 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184166 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00981 1.00981 2.01962 4.03924 8.07848 16.157 32.3139 64.6278 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.567 x 4.745 at -8.47 degrees (North through East) ! Clean map min=-0.0018638 max=0.054713 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2102+4702_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:03:17 2019