! Started logfile: J2101-4219_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:01 2019 obs J2101-4219_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2101-4219_S_2017_08_12_pus_uva.fits ! AN table 1: 164 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.23103 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2101-4219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 6820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2101-4219_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 830 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 832 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 834 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1640 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.733388Jy sigma=0.004316 ! Fit after self-cal, rms=0.567038Jy sigma=0.003352 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=5.549 mas, bpa=4.577 degrees ! Estimated noise=2346.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.35185 Jy ! Component: 100 - total flux cleaned = 0.521232 Jy ! Total flux subtracted in 100 components = 0.521232 Jy ! Clean residual min=-0.054857 max=0.093018 Jy/beam ! Clean residual mean=-0.001238 rms=0.022581 Jy/beam ! Combined flux in latest and established models = 0.521232 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.521232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267519Jy sigma=0.001564 ! Fit after self-cal, rms=0.266854Jy sigma=0.001560 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.363 mas, bpa=2.209 degrees ! Estimated noise=1686.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172005 Jy ! Component: 100 - total flux cleaned = 0.261845 Jy ! Component: 150 - total flux cleaned = 0.309727 Jy ! Component: 200 - total flux cleaned = 0.335362 Jy ! Total flux subtracted in 200 components = 0.335362 Jy ! Clean residual min=-0.020228 max=0.031934 Jy/beam ! Clean residual mean=-0.000419 rms=0.007708 Jy/beam ! Combined flux in latest and established models = 0.856594 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 52 components and 0.856594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122922Jy sigma=0.000717 ! Fit after self-cal, rms=0.122368Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.98 MK 1.00 NL 1.00* OV 1.05 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 0.95 MK 1.00 NL 1.00* OV 1.09 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.93 ! LA 0.96 MK 1.06 NL 1.00* OV 0.99 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.122368Jy sigma=0.000714 ! Fit after self-cal, rms=0.114631Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.373 mas, bpa=2.051 degrees ! Estimated noise=1683.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000312336 Jy ! Component: 100 - total flux cleaned = -0.000394654 Jy ! Component: 150 - total flux cleaned = -0.000387944 Jy ! Component: 200 - total flux cleaned = -0.000315257 Jy ! Total flux subtracted in 200 components = -0.000315257 Jy ! Clean residual min=-0.017190 max=0.027882 Jy/beam ! Clean residual mean=-0.000110 rms=0.005615 Jy/beam ! Combined flux in latest and established models = 0.856279 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.856279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114525Jy sigma=0.000675 ! Fit after self-cal, rms=0.114551Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114551Jy sigma=0.000675 ! Fit after self-cal, rms=0.114617Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=6.377 mas, bpa=2.097 degrees ! Estimated noise=1684.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000431093 Jy ! Component: 100 - total flux cleaned = -0.000428582 Jy ! Component: 150 - total flux cleaned = -0.000433704 Jy ! Component: 200 - total flux cleaned = -0.000434001 Jy ! Total flux subtracted in 200 components = -0.000434001 Jy ! Clean residual min=-0.017139 max=0.027529 Jy/beam ! Clean residual mean=-0.000108 rms=0.005591 Jy/beam ! Combined flux in latest and established models = 0.855845 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.855844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114523Jy sigma=0.000674 ! Fit after self-cal, rms=0.114532Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252773 Jy ! Component: 100 - total flux cleaned = 0.0342079 Jy ! Component: 150 - total flux cleaned = 0.0368287 Jy ! Component: 200 - total flux cleaned = 0.0384974 Jy ! Total flux subtracted in 200 components = 0.0384974 Jy ! Clean residual min=-0.012992 max=0.012959 Jy/beam ! Clean residual mean=-0.000014 rms=0.003105 Jy/beam ! Combined flux in latest and established models = 0.894342 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.894342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109376Jy sigma=0.000644 ! Fit after self-cal, rms=0.108912Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108912Jy sigma=0.000641 ! Fit after self-cal, rms=0.108137Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=6.399 mas, bpa=2.084 degrees ! Estimated noise=1678.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696715 Jy ! Component: 100 - total flux cleaned = 0.00905892 Jy ! Component: 150 - total flux cleaned = 0.00914115 Jy ! Component: 200 - total flux cleaned = 0.00921304 Jy ! Total flux subtracted in 200 components = 0.00921304 Jy ! Clean residual min=-0.009733 max=0.008878 Jy/beam ! Clean residual mean=-0.000013 rms=0.002183 Jy/beam ! Combined flux in latest and established models = 0.903555 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.903555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107706Jy sigma=0.000636 ! Fit after self-cal, rms=0.107656Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236954 Jy ! Component: 100 - total flux cleaned = 0.00245609 Jy ! Component: 150 - total flux cleaned = 0.00245597 Jy ! Component: 200 - total flux cleaned = 0.00234866 Jy ! Total flux subtracted in 200 components = 0.00234866 Jy ! Clean residual min=-0.009006 max=0.008244 Jy/beam ! Clean residual mean=-0.000008 rms=0.002035 Jy/beam ! Combined flux in latest and established models = 0.905904 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 99 components and 0.905904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107559Jy sigma=0.000635 ! Fit after self-cal, rms=0.107553Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107553Jy sigma=0.000635 ! Fit after self-cal, rms=0.107418Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.824 mas, bmaj=24.68 mas, bpa=-0.756 degrees ! Estimated noise=2434.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311592 Jy ! Component: 100 - total flux cleaned = 0.00311981 Jy ! Component: 150 - total flux cleaned = 0.00316914 Jy ! Component: 200 - total flux cleaned = 0.0032107 Jy ! Total flux subtracted in 200 components = 0.0032107 Jy ! Clean residual min=-0.008906 max=0.010831 Jy/beam ! Clean residual mean=-0.000027 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 0.909114 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 111 components and 0.909114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107377Jy sigma=0.000635 ! Fit after self-cal, rms=0.107368Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127647 Jy ! Component: 100 - total flux cleaned = 0.00108931 Jy ! Component: 150 - total flux cleaned = 0.000921579 Jy ! Component: 200 - total flux cleaned = 0.000847059 Jy ! Total flux subtracted in 200 components = 0.000847059 Jy ! Clean residual min=-0.008497 max=0.010456 Jy/beam ! Clean residual mean=-0.000019 rms=0.003148 Jy/beam ! Combined flux in latest and established models = 0.909961 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.909961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107355Jy sigma=0.000635 ! Fit after self-cal, rms=0.107353Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=6.4 mas, bpa=1.995 degrees ! Estimated noise=1677.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 6.4 at 1.995 degrees (North through East) ! Clean map min=-0.0071149 max=0.47122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=5.588 mas, bpa=4.436 degrees ! Estimated noise=2344.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.349607 Jy ! Component: 100 - total flux cleaned = 0.516258 Jy ! Component: 150 - total flux cleaned = 0.622957 Jy ! Component: 200 - total flux cleaned = 0.694432 Jy ! Total flux subtracted in 200 components = 0.694432 Jy ! Clean residual min=-0.030434 max=0.043477 Jy/beam ! Clean residual mean=-0.000625 rms=0.011573 Jy/beam ! Combined flux in latest and established models = 0.694432 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.694432 Jy ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=6.4 mas, bpa=1.995 degrees ! Estimated noise=1677.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077263 Jy ! Component: 100 - total flux cleaned = 0.120507 Jy ! Component: 150 - total flux cleaned = 0.148063 Jy ! Component: 200 - total flux cleaned = 0.166432 Jy ! Total flux subtracted in 200 components = 0.166432 Jy ! Clean residual min=-0.012508 max=0.012284 Jy/beam ! Clean residual mean=-0.000116 rms=0.003974 Jy/beam ! Combined flux in latest and established models = 0.860864 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 82 components and 0.860864 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.824 mas, bmaj=24.68 mas, bpa=-0.756 degrees ! Estimated noise=2434.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212629 Jy ! Component: 100 - total flux cleaned = 0.032873 Jy ! Component: 150 - total flux cleaned = 0.0398062 Jy ! Component: 200 - total flux cleaned = 0.0439599 Jy ! Total flux subtracted in 200 components = 0.0439599 Jy ! Clean residual min=-0.009959 max=0.010327 Jy/beam ! Clean residual mean=-0.000048 rms=0.003331 Jy/beam ! Combined flux in latest and established models = 0.904824 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248894 Jy ! Component: 100 - total flux cleaned = 0.00353307 Jy ! Component: 150 - total flux cleaned = 0.00380433 Jy ! Component: 200 - total flux cleaned = 0.00400366 Jy ! Total flux subtracted in 200 components = 0.00400366 Jy ! Clean residual min=-0.008911 max=0.010300 Jy/beam ! Clean residual mean=-0.000025 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 0.908828 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.908827 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=6.4 mas, bpa=1.995 degrees ! Estimated noise=1677.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000249486 Jy ! Component: 100 - total flux cleaned = -0.00018017 Jy ! Component: 150 - total flux cleaned = -0.000294496 Jy ! Component: 200 - total flux cleaned = -0.000575862 Jy ! Total flux subtracted in 200 components = -0.000575862 Jy ! Clean residual min=-0.008188 max=0.007889 Jy/beam ! Clean residual mean=-0.000009 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.908252 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 122 components and 0.908252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107555Jy sigma=0.000636 ! Fit after self-cal, rms=0.107446Jy sigma=0.000635 wmodel J2101-4219_S_2017_08_12_pus_map.mod ! Writing 122 model components to file: J2101-4219_S_2017_08_12_pus_map.mod wobs J2101-4219_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2101-4219_S_2017_08_12_pus_uvs.fits wwins J2101-4219_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J2101-4219_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000906871 Jy ! Component: 100 - total flux cleaned = -0.000564883 Jy ! Component: 150 - total flux cleaned = -0.000766283 Jy ! Component: 200 - total flux cleaned = -0.00111902 Jy ! Component: 250 - total flux cleaned = -0.00175593 Jy ! Component: 300 - total flux cleaned = -0.00234536 Jy ! Component: 350 - total flux cleaned = -0.00241864 Jy ! Component: 400 - total flux cleaned = -0.00241848 Jy ! Component: 450 - total flux cleaned = -0.00229642 Jy ! Component: 500 - total flux cleaned = -0.00195241 Jy ! Component: 550 - total flux cleaned = -0.00162076 Jy ! Component: 600 - total flux cleaned = -0.00140593 Jy ! Component: 650 - total flux cleaned = -0.00114714 Jy ! Component: 700 - total flux cleaned = -0.000947099 Jy ! Component: 750 - total flux cleaned = -0.000705409 Jy ! Component: 800 - total flux cleaned = -0.000611836 Jy ! Component: 850 - total flux cleaned = -0.000474677 Jy ! Component: 900 - total flux cleaned = -0.000340735 Jy ! Component: 950 - total flux cleaned = -0.000166478 Jy ! Component: 1000 - total flux cleaned = 3.47367e-06 Jy ! Component: 1050 - total flux cleaned = 3.49306e-06 Jy ! Component: 1100 - total flux cleaned = 8.50478e-05 Jy ! Component: 1150 - total flux cleaned = 0.000165283 Jy ! Component: 1200 - total flux cleaned = 0.000126071 Jy ! Component: 1250 - total flux cleaned = 0.000126189 Jy ! Component: 1300 - total flux cleaned = -6.3548e-05 Jy ! Component: 1350 - total flux cleaned = -0.000138359 Jy ! Component: 1400 - total flux cleaned = -0.000249583 Jy ! Component: 1450 - total flux cleaned = -0.000249433 Jy ! Component: 1500 - total flux cleaned = -0.00032326 Jy ! Component: 1550 - total flux cleaned = -0.000396608 Jy ! Component: 1600 - total flux cleaned = -0.000396729 Jy ! Component: 1650 - total flux cleaned = -0.000433574 Jy ! Component: 1700 - total flux cleaned = -0.000543072 Jy ! Component: 1750 - total flux cleaned = -0.000579707 Jy ! Component: 1800 - total flux cleaned = -0.000762705 Jy ! Component: 1850 - total flux cleaned = -0.000909321 Jy ! Component: 1900 - total flux cleaned = -0.00109388 Jy ! Component: 1950 - total flux cleaned = -0.00131679 Jy ! Component: 2000 - total flux cleaned = -0.00146656 Jy ! Component: 2050 - total flux cleaned = -0.00165557 Jy ! Component: 2100 - total flux cleaned = -0.00188415 Jy ! Component: 2150 - total flux cleaned = -0.00207659 Jy ! Component: 2200 - total flux cleaned = -0.00227073 Jy ! Component: 2250 - total flux cleaned = -0.00242876 Jy ! Component: 2300 - total flux cleaned = -0.00254893 Jy ! Component: 2350 - total flux cleaned = -0.00271072 Jy ! Component: 2400 - total flux cleaned = -0.00283381 Jy ! Component: 2450 - total flux cleaned = -0.00295875 Jy ! Component: 2500 - total flux cleaned = -0.00304325 Jy ! Component: 2550 - total flux cleaned = -0.0031711 Jy ! Component: 2600 - total flux cleaned = -0.00330057 Jy ! Component: 2650 - total flux cleaned = -0.00338816 Jy ! Component: 2700 - total flux cleaned = -0.00352134 Jy ! Component: 2750 - total flux cleaned = -0.003612 Jy ! Component: 2800 - total flux cleaned = -0.00370395 Jy ! Component: 2850 - total flux cleaned = -0.00375052 Jy ! Component: 2900 - total flux cleaned = -0.00394066 Jy ! Component: 2950 - total flux cleaned = -0.00398896 Jy ! Component: 3000 - total flux cleaned = -0.00403818 Jy ! Component: 3050 - total flux cleaned = -0.00408817 Jy ! Component: 3100 - total flux cleaned = -0.00408844 Jy ! Component: 3150 - total flux cleaned = -0.00408828 Jy ! Component: 3200 - total flux cleaned = -0.00414148 Jy ! Component: 3250 - total flux cleaned = -0.00414167 Jy ! Component: 3300 - total flux cleaned = -0.00414185 Jy ! Component: 3350 - total flux cleaned = -0.00414219 Jy ! Component: 3400 - total flux cleaned = -0.00414259 Jy ! Component: 3450 - total flux cleaned = -0.00414244 Jy ! Component: 3500 - total flux cleaned = -0.00414276 Jy ! Component: 3550 - total flux cleaned = -0.00414227 Jy ! Component: 3600 - total flux cleaned = -0.00414168 Jy ! Component: 3650 - total flux cleaned = -0.00420541 Jy ! Component: 3700 - total flux cleaned = -0.00420585 Jy ! Component: 3750 - total flux cleaned = -0.00420581 Jy ! Component: 3800 - total flux cleaned = -0.00420641 Jy ! Component: 3850 - total flux cleaned = -0.00420712 Jy ! Component: 3900 - total flux cleaned = -0.00420759 Jy ! Component: 3950 - total flux cleaned = -0.0042071 Jy ! Component: 4000 - total flux cleaned = -0.00428166 Jy ! Component: 4050 - total flux cleaned = -0.00428246 Jy ! Total flux subtracted in 4096 components = -0.00420508 Jy ! Clean residual min=-0.004425 max=0.004147 Jy/beam ! Clean residual mean=-0.000036 rms=0.001274 Jy/beam ! Combined flux in latest and established models = 0.904047 Jy keep ! Adding 168 model components to the UV plane model. ! The established model now contains 290 components and 0.904047 Jy ![Exited script file: muppet] wmap "J2101-4219_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 6.4 at 1.995 degrees (North through East) ! Clean map min=-0.0077749 max=0.47147 Jy/beam ! Writing clean map to FITS file: J2101-4219_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.471469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00135918 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.864858 0.864858 1.72972 3.45943 6.91887 13.8377 27.6755 55.3509 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.471 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 6.4 at 1.995 degrees (North through East) ! Clean map min=-0.0077749 max=0.47147 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2101-4219_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:06 2019