! Started logfile: J2101+0341_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:06 2019 obs J2101+0341_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2101+0341_S_2017_10_21_pus_uva.fits ! AN table 1: 20 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.588889 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 1696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2101+0341_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 125 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.632866Jy sigma=0.006691 ! Fit after self-cal, rms=0.628566Jy sigma=0.006649 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=21.43 mas, bpa=-19.67 degrees ! Estimated noise=2273.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270345 Jy ! Component: 100 - total flux cleaned = 0.351074 Jy ! Total flux subtracted in 100 components = 0.351074 Jy ! Clean residual min=-0.028376 max=0.048654 Jy/beam ! Clean residual mean=0.000014 rms=0.010147 Jy/beam ! Combined flux in latest and established models = 0.351074 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.351074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138709Jy sigma=0.001314 ! Fit after self-cal, rms=0.138624Jy sigma=0.001313 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.522 mas, bmaj=20.75 mas, bpa=-19.29 degrees ! Estimated noise=1919.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.055438 Jy ! Component: 100 - total flux cleaned = 0.0856533 Jy ! Component: 150 - total flux cleaned = 0.0995141 Jy ! Component: 200 - total flux cleaned = 0.104183 Jy ! Total flux subtracted in 200 components = 0.104183 Jy ! Clean residual min=-0.019696 max=0.028741 Jy/beam ! Clean residual mean=0.000037 rms=0.005819 Jy/beam ! Combined flux in latest and established models = 0.455257 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 44 components and 0.455257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109833Jy sigma=0.001052 ! Fit after self-cal, rms=0.109811Jy sigma=0.001052 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.91 KP 1.08 ! LA 1.00 MK 1.16 NL 0.87 OV 0.98 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.90 KP 1.00 ! LA 0.97 MK 1.16 NL 0.90 OV 1.03 ! PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.90 KP 1.02 ! LA 0.76 MK 1.19 NL 1.16 OV 0.91 ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.76 KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.00* ! PT 1.10 ! ! ! Fit before self-cal, rms=0.109811Jy sigma=0.001052 ! Fit after self-cal, rms=0.093009Jy sigma=0.000924 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=20.79 mas, bpa=-19.01 degrees ! Estimated noise=1903.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00403391 Jy ! Component: 100 - total flux cleaned = -0.00496037 Jy ! Component: 150 - total flux cleaned = -0.00536427 Jy ! Component: 200 - total flux cleaned = -0.00537056 Jy ! Total flux subtracted in 200 components = -0.00537056 Jy ! Clean residual min=-0.015780 max=0.019774 Jy/beam ! Clean residual mean=0.000007 rms=0.004225 Jy/beam ! Combined flux in latest and established models = 0.449886 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 0.449886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089136Jy sigma=0.000887 ! Fit after self-cal, rms=0.089043Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089043Jy sigma=0.000887 ! Fit after self-cal, rms=0.078533Jy sigma=0.000733 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=20.69 mas, bpa=-19.17 degrees ! Estimated noise=1916.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00617324 Jy ! Component: 100 - total flux cleaned = -0.00819725 Jy ! Component: 150 - total flux cleaned = -0.0088172 Jy ! Component: 200 - total flux cleaned = -0.00922681 Jy ! Total flux subtracted in 200 components = -0.00922681 Jy ! Clean residual min=-0.007280 max=0.006499 Jy/beam ! Clean residual mean=0.000009 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.44066 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.44066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077874Jy sigma=0.000723 ! Fit after self-cal, rms=0.077968Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000510856 Jy ! Component: 100 - total flux cleaned = -0.000832698 Jy ! Component: 150 - total flux cleaned = -0.00112597 Jy ! Component: 200 - total flux cleaned = -0.00147392 Jy ! Total flux subtracted in 200 components = -0.00147392 Jy ! Clean residual min=-0.006588 max=0.006145 Jy/beam ! Clean residual mean=0.000009 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.439186 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.439186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077772Jy sigma=0.000720 ! Fit after self-cal, rms=0.077769Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077769Jy sigma=0.000720 ! Fit after self-cal, rms=0.078299Jy sigma=0.000718 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=20.67 mas, bpa=-19.16 degrees ! Estimated noise=1918.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00345504 Jy ! Component: 100 - total flux cleaned = -0.00401689 Jy ! Component: 150 - total flux cleaned = -0.00440428 Jy ! Component: 200 - total flux cleaned = -0.0046661 Jy ! Total flux subtracted in 200 components = -0.0046661 Jy ! Clean residual min=-0.005829 max=0.005735 Jy/beam ! Clean residual mean=0.000008 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.43452 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.43452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078059Jy sigma=0.000714 ! Fit after self-cal, rms=0.078059Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240635 Jy ! Component: 100 - total flux cleaned = -0.000520733 Jy ! Component: 150 - total flux cleaned = -0.000707603 Jy ! Component: 200 - total flux cleaned = -0.000821825 Jy ! Total flux subtracted in 200 components = -0.000821825 Jy ! Clean residual min=-0.005440 max=0.005549 Jy/beam ! Clean residual mean=0.000008 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.433698 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.433698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077976Jy sigma=0.000713 ! Fit after self-cal, rms=0.077973Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077973Jy sigma=0.000713 ! Fit after self-cal, rms=0.078436Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.73 mas, bmaj=19.76 mas, bpa=-17.39 degrees ! Estimated noise=2301.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224502 Jy ! Component: 100 - total flux cleaned = -0.00252682 Jy ! Component: 150 - total flux cleaned = -0.00239486 Jy ! Component: 200 - total flux cleaned = -0.0022441 Jy ! Total flux subtracted in 200 components = -0.0022441 Jy ! Clean residual min=-0.005220 max=0.006218 Jy/beam ! Clean residual mean=0.000014 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 0.431454 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 123 components and 0.431454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078385Jy sigma=0.000711 ! Fit after self-cal, rms=0.078383Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280666 Jy ! Component: 100 - total flux cleaned = 0.000347608 Jy ! Component: 150 - total flux cleaned = 0.000405711 Jy ! Component: 200 - total flux cleaned = 0.000432986 Jy ! Total flux subtracted in 200 components = 0.000432986 Jy ! Clean residual min=-0.005159 max=0.006188 Jy/beam ! Clean residual mean=0.000014 rms=0.001673 Jy/beam ! Combined flux in latest and established models = 0.431887 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.431887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078371Jy sigma=0.000711 ! Fit after self-cal, rms=0.078367Jy sigma=0.000711 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=20.64 mas, bpa=-19.14 degrees ! Estimated noise=1919.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 20.64 at -19.14 degrees (North through East) ! Clean map min=-0.0064022 max=0.3637 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=20.95 mas, bpa=-19.63 degrees ! Estimated noise=2346.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277377 Jy ! Component: 100 - total flux cleaned = 0.35103 Jy ! Component: 150 - total flux cleaned = 0.386019 Jy ! Component: 200 - total flux cleaned = 0.403823 Jy ! Total flux subtracted in 200 components = 0.403823 Jy ! Clean residual min=-0.010448 max=0.011298 Jy/beam ! Clean residual mean=0.000004 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 0.403823 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.403823 Jy ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=20.64 mas, bpa=-19.14 degrees ! Estimated noise=1919.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140202 Jy ! Component: 100 - total flux cleaned = 0.0207476 Jy ! Component: 150 - total flux cleaned = 0.0232944 Jy ! Component: 200 - total flux cleaned = 0.024706 Jy ! Total flux subtracted in 200 components = 0.024706 Jy ! Clean residual min=-0.005675 max=0.005507 Jy/beam ! Clean residual mean=0.000008 rms=0.001572 Jy/beam ! Combined flux in latest and established models = 0.428528 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.428529 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.73 mas, bmaj=19.76 mas, bpa=-17.39 degrees ! Estimated noise=2301.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184304 Jy ! Component: 100 - total flux cleaned = 0.00241576 Jy ! Component: 150 - total flux cleaned = 0.00302752 Jy ! Component: 200 - total flux cleaned = 0.00322504 Jy ! Total flux subtracted in 200 components = 0.00322504 Jy ! Clean residual min=-0.005062 max=0.005791 Jy/beam ! Clean residual mean=0.000012 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.431754 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0241e-05 Jy ! Component: 100 - total flux cleaned = 0.000175238 Jy ! Component: 150 - total flux cleaned = 0.000280985 Jy ! Component: 200 - total flux cleaned = 0.000377462 Jy ! Total flux subtracted in 200 components = 0.000377462 Jy ! Clean residual min=-0.005042 max=0.005856 Jy/beam ! Clean residual mean=0.000012 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.432131 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 86 components and 0.432131 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=20.64 mas, bpa=-19.14 degrees ! Estimated noise=1919.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013436 Jy ! Component: 100 - total flux cleaned = -0.00152592 Jy ! Component: 150 - total flux cleaned = -0.00167957 Jy ! Component: 200 - total flux cleaned = -0.00181731 Jy ! Total flux subtracted in 200 components = -0.00181731 Jy ! Clean residual min=-0.004774 max=0.005420 Jy/beam ! Clean residual mean=0.000007 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.430314 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.430314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078466Jy sigma=0.000711 ! Fit after self-cal, rms=0.078449Jy sigma=0.000711 wmodel J2101+0341_S_2017_10_21_pus_map.mod ! Writing 102 model components to file: J2101+0341_S_2017_10_21_pus_map.mod wobs J2101+0341_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2101+0341_S_2017_10_21_pus_uvs.fits wwins J2101+0341_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2101+0341_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165552 Jy ! Component: 100 - total flux cleaned = 0.00200593 Jy ! Component: 150 - total flux cleaned = 0.00216631 Jy ! Component: 200 - total flux cleaned = 0.00224262 Jy ! Component: 250 - total flux cleaned = 0.00224495 Jy ! Component: 300 - total flux cleaned = 0.00211221 Jy ! Component: 350 - total flux cleaned = 0.0018529 Jy ! Component: 400 - total flux cleaned = 0.00160339 Jy ! Component: 450 - total flux cleaned = 0.00124484 Jy ! Component: 500 - total flux cleaned = 0.00101381 Jy ! Component: 550 - total flux cleaned = 0.000788868 Jy ! Component: 600 - total flux cleaned = 0.000462108 Jy ! Component: 650 - total flux cleaned = 0.000252055 Jy ! Component: 700 - total flux cleaned = 0.000199407 Jy ! Component: 750 - total flux cleaned = 9.91515e-05 Jy ! Component: 800 - total flux cleaned = 9.79873e-05 Jy ! Component: 850 - total flux cleaned = 0.000144839 Jy ! Component: 900 - total flux cleaned = 0.00014624 Jy ! Component: 950 - total flux cleaned = 0.000324868 Jy ! Component: 1000 - total flux cleaned = 0.000324421 Jy ! Component: 1050 - total flux cleaned = 0.000409881 Jy ! Component: 1100 - total flux cleaned = 0.000535505 Jy ! Component: 1150 - total flux cleaned = 0.000781311 Jy ! Component: 1200 - total flux cleaned = 0.000860203 Jy ! Component: 1250 - total flux cleaned = 0.00101816 Jy ! Component: 1300 - total flux cleaned = 0.00128929 Jy ! Component: 1350 - total flux cleaned = 0.00144133 Jy ! Component: 1400 - total flux cleaned = 0.0015539 Jy ! Component: 1450 - total flux cleaned = 0.00170101 Jy ! Component: 1500 - total flux cleaned = 0.00191841 Jy ! Component: 1550 - total flux cleaned = 0.00195385 Jy ! Component: 1600 - total flux cleaned = 0.00205923 Jy ! Component: 1650 - total flux cleaned = 0.00216287 Jy ! Component: 1700 - total flux cleaned = 0.00216321 Jy ! Component: 1750 - total flux cleaned = 0.00233145 Jy ! Component: 1800 - total flux cleaned = 0.00246403 Jy ! Component: 1850 - total flux cleaned = 0.00246409 Jy ! Component: 1900 - total flux cleaned = 0.00249633 Jy ! Component: 1950 - total flux cleaned = 0.00252808 Jy ! Component: 2000 - total flux cleaned = 0.00259098 Jy ! Component: 2050 - total flux cleaned = 0.00259097 Jy ! Component: 2100 - total flux cleaned = 0.00259168 Jy ! Component: 2150 - total flux cleaned = 0.00271328 Jy ! Component: 2200 - total flux cleaned = 0.00277318 Jy ! Component: 2250 - total flux cleaned = 0.00274356 Jy ! Component: 2300 - total flux cleaned = 0.00289 Jy ! Component: 2350 - total flux cleaned = 0.00306334 Jy ! Component: 2400 - total flux cleaned = 0.00306303 Jy ! Component: 2450 - total flux cleaned = 0.0032051 Jy ! Component: 2500 - total flux cleaned = 0.00331739 Jy ! Component: 2550 - total flux cleaned = 0.00345665 Jy ! Component: 2600 - total flux cleaned = 0.00353926 Jy ! Component: 2650 - total flux cleaned = 0.00359374 Jy ! Component: 2700 - total flux cleaned = 0.00367501 Jy ! Component: 2750 - total flux cleaned = 0.00372881 Jy ! Component: 2800 - total flux cleaned = 0.00380861 Jy ! Component: 2850 - total flux cleaned = 0.00388794 Jy ! Component: 2900 - total flux cleaned = 0.00383553 Jy ! Component: 2950 - total flux cleaned = 0.00393912 Jy ! Component: 3000 - total flux cleaned = 0.00393875 Jy ! Component: 3050 - total flux cleaned = 0.00396427 Jy ! Component: 3100 - total flux cleaned = 0.00401481 Jy ! Component: 3150 - total flux cleaned = 0.00406461 Jy ! Component: 3200 - total flux cleaned = 0.00398996 Jy ! Component: 3250 - total flux cleaned = 0.00401485 Jy ! Component: 3300 - total flux cleaned = 0.00403944 Jy ! Component: 3350 - total flux cleaned = 0.00406407 Jy ! Component: 3400 - total flux cleaned = 0.00408806 Jy ! Component: 3450 - total flux cleaned = 0.00413594 Jy ! Component: 3500 - total flux cleaned = 0.00396941 Jy ! Component: 3550 - total flux cleaned = 0.00392229 Jy ! Component: 3600 - total flux cleaned = 0.00396942 Jy ! Component: 3650 - total flux cleaned = 0.00399251 Jy ! Component: 3700 - total flux cleaned = 0.00387662 Jy ! Component: 3750 - total flux cleaned = 0.00383058 Jy ! Component: 3800 - total flux cleaned = 0.00380757 Jy ! Component: 3850 - total flux cleaned = 0.00364825 Jy ! Component: 3900 - total flux cleaned = 0.00358026 Jy ! Component: 3950 - total flux cleaned = 0.00340022 Jy ! Component: 4000 - total flux cleaned = 0.0034004 Jy ! Component: 4050 - total flux cleaned = 0.00333347 Jy ! Total flux subtracted in 4096 components = 0.00333326 Jy ! Clean residual min=-0.001452 max=0.001241 Jy/beam ! Clean residual mean=-0.000003 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.433647 Jy keep ! Adding 344 model components to the UV plane model. ! The established model now contains 446 components and 0.433647 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 20.64 at -19.14 degrees (North through East) ! Clean map min=-0.0053408 max=0.36506 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.365059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000422313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.347051 0.347051 0.694101 1.3882 2.77641 5.55281 11.1056 22.2112 44.4225 88.845 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.365 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.631 x 20.64 at -19.14 degrees (North through East) ! Clean map min=-0.0053408 max=0.36506 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2101+0341_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:10 2019