! Started logfile: J2101+0341_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:38 2019 obs J2101+0341_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2101+0341_S_2017_05_27_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.860185 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2101+0341_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983428Jy sigma=0.062333 ! Fit after self-cal, rms=0.981633Jy sigma=0.062351 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=6.545 mas, bpa=-7.879 degrees ! Estimated noise=598.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115503 Jy ! Component: 100 - total flux cleaned = 0.160752 Jy ! Total flux subtracted in 100 components = 0.160752 Jy ! Clean residual min=-0.042718 max=0.072745 Jy/beam ! Clean residual mean=0.000024 rms=0.014237 Jy/beam ! Combined flux in latest and established models = 0.160752 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.160752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.986113Jy sigma=0.007872 ! Fit after self-cal, rms=0.986054Jy sigma=0.007871 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=6.959 mas, bpa=-6.784 degrees ! Estimated noise=622.702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621704 Jy ! Component: 100 - total flux cleaned = 0.106497 Jy ! Component: 150 - total flux cleaned = 0.141396 Jy ! Component: 200 - total flux cleaned = 0.169287 Jy ! Total flux subtracted in 200 components = 0.169287 Jy ! Clean residual min=-0.048713 max=0.079019 Jy/beam ! Clean residual mean=0.000039 rms=0.016385 Jy/beam ! Combined flux in latest and established models = 0.330038 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.330038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.962290Jy sigma=0.009761 ! Fit after self-cal, rms=0.962214Jy sigma=0.009761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.52 FD 0.68 HN 0.58 KP 0.78 ! LA 0.78 MK 0.50 NL 0.65 OV 0.78 ! PT 0.83 SC 0.57 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.54 FD 0.72 HN 0.60 KP 0.74 ! LA 0.76 MK 0.50 NL 0.75 OV 0.79 ! PT 0.81 SC 0.60 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 25.49 FD 0.74 HN 0.60 KP 0.78 ! LA 0.81 MK 24.71 NL 0.71 OV 0.73 ! PT 0.81 SC 0.57 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 0.57 KP 1.00* ! LA 0.78 MK 0.41 NL 1.00* OV 1.00* ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.962214Jy sigma=0.009761 ! Fit after self-cal, rms=174.484390Jy sigma=0.001456 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=7.48 mas, bpa=-1.641 degrees ! Estimated noise=764.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578549 Jy ! Component: 100 - total flux cleaned = -0.000274514 Jy ! Component: 150 - total flux cleaned = -0.00545894 Jy ! Component: 200 - total flux cleaned = -0.00994007 Jy ! Total flux subtracted in 200 components = -0.00994007 Jy ! Clean residual min=-0.012523 max=0.011426 Jy/beam ! Clean residual mean=-0.000008 rms=0.002699 Jy/beam ! Combined flux in latest and established models = 0.320098 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 32 components and 0.320098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=174.482498Jy sigma=0.001358 ! Fit after self-cal, rms=174.482513Jy sigma=0.001329 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=174.482513Jy sigma=0.001329 ! Fit after self-cal, rms=5.310420Jy sigma=0.001034 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=7.48 mas, bpa=-2.396 degrees ! Estimated noise=777.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165818 Jy ! Component: 100 - total flux cleaned = -0.00180459 Jy ! Component: 150 - total flux cleaned = -0.00479669 Jy ! Component: 200 - total flux cleaned = -0.00710102 Jy ! Total flux subtracted in 200 components = -0.00710102 Jy ! Clean residual min=-0.008745 max=0.007233 Jy/beam ! Clean residual mean=0.000007 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.312997 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.312997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.309331Jy sigma=0.000985 ! Fit after self-cal, rms=5.309329Jy sigma=0.000985 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203269 Jy ! Component: 100 - total flux cleaned = -0.00337717 Jy ! Component: 150 - total flux cleaned = -0.00440361 Jy ! Component: 200 - total flux cleaned = -0.00533372 Jy ! Total flux subtracted in 200 components = -0.00533372 Jy ! Clean residual min=-0.007940 max=0.007336 Jy/beam ! Clean residual mean=0.000010 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.307663 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.307663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.308943Jy sigma=0.000969 ! Fit after self-cal, rms=5.308945Jy sigma=0.000969 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.308945Jy sigma=0.000969 ! Fit after self-cal, rms=0.044920Jy sigma=0.000723 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.502 mas, bpa=-2.695 degrees ! Estimated noise=772.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00282205 Jy ! Component: 100 - total flux cleaned = -0.00361847 Jy ! Component: 150 - total flux cleaned = -0.00448247 Jy ! Component: 200 - total flux cleaned = -0.00513308 Jy ! Total flux subtracted in 200 components = -0.00513308 Jy ! Clean residual min=-0.004281 max=0.003440 Jy/beam ! Clean residual mean=0.000005 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.30253 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.30253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043964Jy sigma=0.000706 ! Fit after self-cal, rms=0.043939Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000591558 Jy ! Component: 100 - total flux cleaned = -0.00113518 Jy ! Component: 150 - total flux cleaned = -0.0016291 Jy ! Component: 200 - total flux cleaned = -0.00198816 Jy ! Total flux subtracted in 200 components = -0.00198816 Jy ! Clean residual min=-0.003776 max=0.003270 Jy/beam ! Clean residual mean=0.000007 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.300542 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.300542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043506Jy sigma=0.000698 ! Fit after self-cal, rms=0.043505Jy sigma=0.000698 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043505Jy sigma=0.000698 ! Fit after self-cal, rms=0.043521Jy sigma=0.000696 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.307 mas, bmaj=11.78 mas, bpa=-4.536 degrees ! Estimated noise=1042.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00272115 Jy ! Component: 100 - total flux cleaned = -0.00304273 Jy ! Component: 150 - total flux cleaned = -0.00340295 Jy ! Component: 200 - total flux cleaned = -0.00366428 Jy ! Total flux subtracted in 200 components = -0.00366428 Jy ! Clean residual min=-0.003707 max=0.003147 Jy/beam ! Clean residual mean=0.000013 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.296878 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.296878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043287Jy sigma=0.000692 ! Fit after self-cal, rms=0.043275Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278899 Jy ! Component: 100 - total flux cleaned = -0.000551826 Jy ! Component: 150 - total flux cleaned = -0.000795338 Jy ! Component: 200 - total flux cleaned = -0.000927183 Jy ! Total flux subtracted in 200 components = -0.000927183 Jy ! Clean residual min=-0.003632 max=0.003134 Jy/beam ! Clean residual mean=0.000014 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.295951 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.295951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043173Jy sigma=0.000690 ! Fit after self-cal, rms=0.043156Jy sigma=0.000690 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.52 mas, bpa=-2.652 degrees ! Estimated noise=774.048 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.52 at -2.652 degrees (North through East) ! Clean map min=-0.0031661 max=0.21756 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=6.679 mas, bpa=-3.345 degrees ! Estimated noise=895.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169878 Jy ! Component: 100 - total flux cleaned = 0.22067 Jy ! Component: 150 - total flux cleaned = 0.242871 Jy ! Component: 200 - total flux cleaned = 0.256126 Jy ! Total flux subtracted in 200 components = 0.256126 Jy ! Clean residual min=-0.004415 max=0.007257 Jy/beam ! Clean residual mean=0.000014 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.256126 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.256126 Jy ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.52 mas, bpa=-2.652 degrees ! Estimated noise=774.048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135173 Jy ! Component: 100 - total flux cleaned = 0.0217703 Jy ! Component: 150 - total flux cleaned = 0.027091 Jy ! Component: 200 - total flux cleaned = 0.0306062 Jy ! Total flux subtracted in 200 components = 0.0306062 Jy ! Clean residual min=-0.003189 max=0.003507 Jy/beam ! Clean residual mean=0.000012 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.286732 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 70 components and 0.286732 Jy ! Inverting map ! Added new window around map position (-26.5, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347034 Jy ! Component: 100 - total flux cleaned = 0.00529981 Jy ! Component: 150 - total flux cleaned = 0.00591995 Jy ! Component: 200 - total flux cleaned = 0.0062202 Jy ! Total flux subtracted in 200 components = 0.0062202 Jy ! Clean residual min=-0.003019 max=0.002708 Jy/beam ! Clean residual mean=0.000011 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.292952 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.292952 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.307 mas, bmaj=11.78 mas, bpa=-4.536 degrees ! Estimated noise=1042.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181799 Jy ! Component: 100 - total flux cleaned = 0.00195283 Jy ! Component: 150 - total flux cleaned = 0.00202337 Jy ! Component: 200 - total flux cleaned = 0.00211567 Jy ! Total flux subtracted in 200 components = 0.00211567 Jy ! Clean residual min=-0.003260 max=0.003412 Jy/beam ! Clean residual mean=0.000022 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.295068 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95425e-05 Jy ! Component: 100 - total flux cleaned = -1.97269e-05 Jy ! Component: 150 - total flux cleaned = -8.96073e-05 Jy ! Component: 200 - total flux cleaned = -0.000111699 Jy ! Total flux subtracted in 200 components = -0.000111699 Jy ! Clean residual min=-0.003214 max=0.003388 Jy/beam ! Clean residual mean=0.000021 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.294956 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 128 components and 0.294956 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.52 mas, bpa=-2.652 degrees ! Estimated noise=774.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000548372 Jy ! Component: 100 - total flux cleaned = -0.00051297 Jy ! Component: 150 - total flux cleaned = -0.000481419 Jy ! Component: 200 - total flux cleaned = -0.000420674 Jy ! Total flux subtracted in 200 components = -0.000420674 Jy ! Clean residual min=-0.002766 max=0.002623 Jy/beam ! Clean residual mean=0.000011 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.294535 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.294535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042467Jy sigma=0.000678 ! Fit after self-cal, rms=0.042434Jy sigma=0.000678 wmodel J2101+0341_S_2017_05_27_pus_map.mod ! Writing 146 model components to file: J2101+0341_S_2017_05_27_pus_map.mod wobs J2101+0341_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2101+0341_S_2017_05_27_pus_uvs.fits wwins J2101+0341_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J2101+0341_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113917 Jy ! Component: 100 - total flux cleaned = -0.00167013 Jy ! Component: 150 - total flux cleaned = -0.00213138 Jy ! Component: 200 - total flux cleaned = -0.00221118 Jy ! Component: 250 - total flux cleaned = -0.0022504 Jy ! Component: 300 - total flux cleaned = -0.0022885 Jy ! Component: 350 - total flux cleaned = -0.00236338 Jy ! Component: 400 - total flux cleaned = -0.00250967 Jy ! Component: 450 - total flux cleaned = -0.00265203 Jy ! Component: 500 - total flux cleaned = -0.00258244 Jy ! Component: 550 - total flux cleaned = -0.00265126 Jy ! Component: 600 - total flux cleaned = -0.00261775 Jy ! Component: 650 - total flux cleaned = -0.00268357 Jy ! Component: 700 - total flux cleaned = -0.00265143 Jy ! Component: 750 - total flux cleaned = -0.00265222 Jy ! Component: 800 - total flux cleaned = -0.00274655 Jy ! Component: 850 - total flux cleaned = -0.00290006 Jy ! Component: 900 - total flux cleaned = -0.00280804 Jy ! Component: 950 - total flux cleaned = -0.00280828 Jy ! Component: 1000 - total flux cleaned = -0.00280884 Jy ! Component: 1050 - total flux cleaned = -0.00280926 Jy ! Component: 1100 - total flux cleaned = -0.00278083 Jy ! Component: 1150 - total flux cleaned = -0.00283802 Jy ! Component: 1200 - total flux cleaned = -0.00289325 Jy ! Component: 1250 - total flux cleaned = -0.00292014 Jy ! Component: 1300 - total flux cleaned = -0.00291975 Jy ! Component: 1350 - total flux cleaned = -0.00286613 Jy ! Component: 1400 - total flux cleaned = -0.00299947 Jy ! Component: 1450 - total flux cleaned = -0.00299977 Jy ! Component: 1500 - total flux cleaned = -0.00307837 Jy ! Component: 1550 - total flux cleaned = -0.00312987 Jy ! Component: 1600 - total flux cleaned = -0.00320639 Jy ! Component: 1650 - total flux cleaned = -0.00335717 Jy ! Component: 1700 - total flux cleaned = -0.00338206 Jy ! Component: 1750 - total flux cleaned = -0.00340664 Jy ! Component: 1800 - total flux cleaned = -0.00350403 Jy ! Component: 1850 - total flux cleaned = -0.00350395 Jy ! Component: 1900 - total flux cleaned = -0.00362306 Jy ! Component: 1950 - total flux cleaned = -0.00369404 Jy ! Component: 2000 - total flux cleaned = -0.00369408 Jy ! Component: 2050 - total flux cleaned = -0.00378739 Jy ! Component: 2100 - total flux cleaned = -0.00390231 Jy ! Component: 2150 - total flux cleaned = -0.00410681 Jy ! Component: 2200 - total flux cleaned = -0.00408407 Jy ! Component: 2250 - total flux cleaned = -0.00415114 Jy ! Component: 2300 - total flux cleaned = -0.00417363 Jy ! Component: 2350 - total flux cleaned = -0.00428343 Jy ! Component: 2400 - total flux cleaned = -0.00441392 Jy ! Component: 2450 - total flux cleaned = -0.00447857 Jy ! Component: 2500 - total flux cleaned = -0.00441421 Jy ! Component: 2550 - total flux cleaned = -0.00454148 Jy ! Component: 2600 - total flux cleaned = -0.00464625 Jy ! Component: 2650 - total flux cleaned = -0.00464654 Jy ! Component: 2700 - total flux cleaned = -0.00483217 Jy ! Component: 2750 - total flux cleaned = -0.00483225 Jy ! Component: 2800 - total flux cleaned = -0.00497399 Jy ! Component: 2850 - total flux cleaned = -0.00505418 Jy ! Component: 2900 - total flux cleaned = -0.00507419 Jy ! Component: 2950 - total flux cleaned = -0.00515355 Jy ! Component: 3000 - total flux cleaned = -0.00523221 Jy ! Component: 3050 - total flux cleaned = -0.00527109 Jy ! Component: 3100 - total flux cleaned = -0.00523253 Jy ! Component: 3150 - total flux cleaned = -0.00536655 Jy ! Component: 3200 - total flux cleaned = -0.00530957 Jy ! Component: 3250 - total flux cleaned = -0.00534747 Jy ! Component: 3300 - total flux cleaned = -0.00544121 Jy ! Component: 3350 - total flux cleaned = -0.00540409 Jy ! Component: 3400 - total flux cleaned = -0.00542267 Jy ! Component: 3450 - total flux cleaned = -0.00544119 Jy ! Component: 3500 - total flux cleaned = -0.00551423 Jy ! Component: 3550 - total flux cleaned = -0.00553218 Jy ! Component: 3600 - total flux cleaned = -0.00562227 Jy ! Component: 3650 - total flux cleaned = -0.00560445 Jy ! Component: 3700 - total flux cleaned = -0.00562218 Jy ! Component: 3750 - total flux cleaned = -0.00569267 Jy ! Component: 3800 - total flux cleaned = -0.00564026 Jy ! Component: 3850 - total flux cleaned = -0.00574459 Jy ! Component: 3900 - total flux cleaned = -0.0058136 Jy ! Component: 3950 - total flux cleaned = -0.00579618 Jy ! Component: 4000 - total flux cleaned = -0.00583015 Jy ! Component: 4050 - total flux cleaned = -0.00588085 Jy ! Total flux subtracted in 4096 components = -0.00586408 Jy ! Clean residual min=-0.000990 max=0.000898 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.288671 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 483 components and 0.288671 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.52 at -2.652 degrees (North through East) ! Clean map min=-0.0019747 max=0.22227 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.222272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000321218 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.433546 0.433546 0.867092 1.73418 3.46837 6.93674 13.8735 27.747 55.4939 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.222 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.135 x 7.52 at -2.652 degrees (North through East) ! Clean map min=-0.0019747 max=0.22227 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2101+0341_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:42 2019