! Started logfile: J2101+0341_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:19 2019 obs J2101+0341_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2101+0341_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.222222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2101+0341_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.556404Jy sigma=0.004017 ! Fit after self-cal, rms=0.542167Jy sigma=0.003959 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=14.04 mas, bpa=23.41 degrees ! Estimated noise=6606.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.367742 Jy ! Component: 100 - total flux cleaned = 0.454071 Jy ! Total flux subtracted in 100 components = 0.454071 Jy ! Clean residual min=-0.029323 max=0.031197 Jy/beam ! Clean residual mean=0.000193 rms=0.009859 Jy/beam ! Combined flux in latest and established models = 0.454071 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.454071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123609Jy sigma=0.000739 ! Fit after self-cal, rms=0.123365Jy sigma=0.000739 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=13.33 mas, bpa=22.48 degrees ! Estimated noise=5779.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024609 Jy ! Component: 100 - total flux cleaned = 0.0368176 Jy ! Component: 150 - total flux cleaned = 0.0432838 Jy ! Component: 200 - total flux cleaned = 0.0461062 Jy ! Total flux subtracted in 200 components = 0.0461062 Jy ! Clean residual min=-0.011911 max=0.011782 Jy/beam ! Clean residual mean=0.000121 rms=0.003746 Jy/beam ! Combined flux in latest and established models = 0.500178 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 73 components and 0.500178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108566Jy sigma=0.000625 ! Fit after self-cal, rms=0.108328Jy sigma=0.000623 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 1.00 MK 1.00* NL 0.93 OV 1.00* ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.98 ! LA 0.99 MK 1.00* NL 1.05 OV 1.00* ! PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 1.06 MK 1.00* NL 1.04 OV 1.00* ! PT 0.98 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.99 ! LA 1.07 MK 1.00* NL 1.00* OV 1.00* ! PT 0.91 SC 1.21 ! ! ! Fit before self-cal, rms=0.108328Jy sigma=0.000623 ! Fit after self-cal, rms=0.115431Jy sigma=0.000596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.004 mas, bmaj=13.38 mas, bpa=22.52 degrees ! Estimated noise=5779.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209044 Jy ! Component: 100 - total flux cleaned = 0.00156326 Jy ! Component: 150 - total flux cleaned = 0.00108512 Jy ! Component: 200 - total flux cleaned = 0.00129549 Jy ! Total flux subtracted in 200 components = 0.00129549 Jy ! Clean residual min=-0.003315 max=0.003299 Jy/beam ! Clean residual mean=-0.000011 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.501473 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.501473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113238Jy sigma=0.000588 ! Fit after self-cal, rms=0.112933Jy sigma=0.000587 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112933Jy sigma=0.000587 ! Fit after self-cal, rms=0.111096Jy sigma=0.000587 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=13.37 mas, bpa=22.52 degrees ! Estimated noise=5769.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663406 Jy ! Component: 100 - total flux cleaned = 0.00118222 Jy ! Component: 150 - total flux cleaned = 0.00118443 Jy ! Component: 200 - total flux cleaned = 0.00134222 Jy ! Total flux subtracted in 200 components = 0.00134222 Jy ! Clean residual min=-0.002472 max=0.002512 Jy/beam ! Clean residual mean=0.000001 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.502815 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 142 components and 0.502815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109927Jy sigma=0.000585 ! Fit after self-cal, rms=0.109634Jy sigma=0.000585 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580216 Jy ! Component: 100 - total flux cleaned = 0.000321554 Jy ! Component: 150 - total flux cleaned = 0.00044516 Jy ! Component: 200 - total flux cleaned = 0.000444176 Jy ! Total flux subtracted in 200 components = 0.000444176 Jy ! Clean residual min=-0.002015 max=0.002006 Jy/beam ! Clean residual mean=-0.000001 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.50326 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 176 components and 0.503259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108860Jy sigma=0.000584 ! Fit after self-cal, rms=0.108683Jy sigma=0.000583 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108683Jy sigma=0.000583 ! Fit after self-cal, rms=0.106346Jy sigma=0.000583 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=13.37 mas, bpa=22.52 degrees ! Estimated noise=5759.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000459439 Jy ! Component: 100 - total flux cleaned = 0.00033763 Jy ! Component: 150 - total flux cleaned = 0.000221492 Jy ! Component: 200 - total flux cleaned = 0.000332069 Jy ! Total flux subtracted in 200 components = 0.000332069 Jy ! Clean residual min=-0.001838 max=0.001817 Jy/beam ! Clean residual mean=0.000002 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.503592 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 200 components and 0.503591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105720Jy sigma=0.000582 ! Fit after self-cal, rms=0.105520Jy sigma=0.000582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304304 Jy ! Component: 100 - total flux cleaned = 0.000890476 Jy ! Component: 150 - total flux cleaned = 0.00145464 Jy ! Component: 200 - total flux cleaned = 0.00191319 Jy ! Total flux subtracted in 200 components = 0.00191319 Jy ! Clean residual min=-0.001519 max=0.001510 Jy/beam ! Clean residual mean=-0.000002 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.505505 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 240 components and 0.505504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105045Jy sigma=0.000582 ! Fit after self-cal, rms=0.104915Jy sigma=0.000582 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104915Jy sigma=0.000582 ! Fit after self-cal, rms=0.103384Jy sigma=0.000582 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.211 mas, bmaj=14.51 mas, bpa=-2.036 degrees ! Estimated noise=6876.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198394 Jy ! Component: 100 - total flux cleaned = -0.000278891 Jy ! Component: 150 - total flux cleaned = -0.000408189 Jy ! Component: 200 - total flux cleaned = -0.000616289 Jy ! Total flux subtracted in 200 components = -0.000616289 Jy ! Clean residual min=-0.000919 max=0.000941 Jy/beam ! Clean residual mean=0.000001 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.504888 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 282 components and 0.504888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103266Jy sigma=0.000581 ! Fit after self-cal, rms=0.103225Jy sigma=0.000581 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279521 Jy ! Component: 100 - total flux cleaned = 0.000390713 Jy ! Component: 150 - total flux cleaned = 0.000429867 Jy ! Component: 200 - total flux cleaned = 0.000475552 Jy ! Total flux subtracted in 200 components = 0.000475552 Jy ! Clean residual min=-0.000839 max=0.000807 Jy/beam ! Clean residual mean=0.000004 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.505363 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 316 components and 0.505363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103083Jy sigma=0.000581 ! Fit after self-cal, rms=0.103033Jy sigma=0.000581 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=13.38 mas, bpa=22.52 degrees ! Estimated noise=5752.17 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.995 x 13.38 at 22.52 degrees (North through East) ! Clean map min=-0.010656 max=0.39237 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=14.08 mas, bpa=23.42 degrees ! Estimated noise=6571.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.365707 Jy ! Component: 100 - total flux cleaned = 0.449395 Jy ! Component: 150 - total flux cleaned = 0.468857 Jy ! Component: 200 - total flux cleaned = 0.480949 Jy ! Total flux subtracted in 200 components = 0.480949 Jy ! Clean residual min=-0.012884 max=0.012945 Jy/beam ! Clean residual mean=0.000100 rms=0.004588 Jy/beam ! Combined flux in latest and established models = 0.480949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.480949 Jy ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=13.38 mas, bpa=22.52 degrees ! Estimated noise=5752.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00722191 Jy ! Component: 100 - total flux cleaned = 0.0130295 Jy ! Component: 150 - total flux cleaned = 0.019636 Jy ! Component: 200 - total flux cleaned = 0.0219188 Jy ! Total flux subtracted in 200 components = 0.0219188 Jy ! Clean residual min=-0.006037 max=0.006180 Jy/beam ! Clean residual mean=0.000068 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.502868 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 92 components and 0.502868 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.211 mas, bmaj=14.51 mas, bpa=-2.036 degrees ! Estimated noise=6876.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000464153 Jy ! Component: 100 - total flux cleaned = 0.000314629 Jy ! Component: 150 - total flux cleaned = 3.15868e-05 Jy ! Component: 200 - total flux cleaned = -0.000701271 Jy ! Total flux subtracted in 200 components = -0.000701271 Jy ! Clean residual min=-0.002583 max=0.002593 Jy/beam ! Clean residual mean=0.000007 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.502167 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000836672 Jy ! Component: 100 - total flux cleaned = -0.00176796 Jy ! Component: 150 - total flux cleaned = -0.00300814 Jy ! Component: 200 - total flux cleaned = -0.00324019 Jy ! Total flux subtracted in 200 components = -0.00324019 Jy ! Clean residual min=-0.004307 max=0.004238 Jy/beam ! Clean residual mean=0.000003 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.498926 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 151 components and 0.498926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=13.38 mas, bpa=22.52 degrees ! Estimated noise=5752.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112721 Jy ! Component: 100 - total flux cleaned = -0.00182054 Jy ! Component: 150 - total flux cleaned = -0.00242294 Jy ! Component: 200 - total flux cleaned = -0.00165027 Jy ! Total flux subtracted in 200 components = -0.00165027 Jy ! Clean residual min=-0.003130 max=0.003146 Jy/beam ! Clean residual mean=-0.000006 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.497276 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 191 components and 0.497276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105225Jy sigma=0.000586 ! Fit after self-cal, rms=0.105560Jy sigma=0.000586 wmodel J2101+0341_S_2017_01_16_pus_map.mod ! Writing 191 model components to file: J2101+0341_S_2017_01_16_pus_map.mod wobs J2101+0341_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2101+0341_S_2017_01_16_pus_uvs.fits wwins J2101+0341_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2101+0341_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.995 x 13.38 at 22.52 degrees (North through East) ! Clean map min=-0.0079368 max=0.40178 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.401776 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00109661 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.818823 0.818823 1.63765 3.27529 6.55058 13.1012 26.2023 52.4047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.401 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.995 x 13.38 at 22.52 degrees (North through East) ! Clean map min=-0.0079368 max=0.40178 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2101+0341_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:22 2019