! Started logfile: J2059-3645_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:01 2019 obs J2059-3645_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2059-3645_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.576437 visibilities/baseline/integration-bin. ! Found source: J2059-3645 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12036 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2059-3645_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 428 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 415 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 297 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 734 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.816122Jy sigma=0.005713 ! Fit after self-cal, rms=0.717523Jy sigma=0.005023 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=13.7 mas, bpa=-19.01 degrees ! Estimated noise=1908.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201377 Jy ! Component: 100 - total flux cleaned = 0.278719 Jy ! Total flux subtracted in 100 components = 0.278719 Jy ! Clean residual min=-0.018836 max=0.036417 Jy/beam ! Clean residual mean=-0.000008 rms=0.006819 Jy/beam ! Combined flux in latest and established models = 0.278719 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.278719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150504Jy sigma=0.000976 ! Fit after self-cal, rms=0.150317Jy sigma=0.000975 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=17.07 mas, bpa=-19.58 degrees ! Estimated noise=1114.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576906 Jy ! Component: 100 - total flux cleaned = 0.0842412 Jy ! Component: 150 - total flux cleaned = 0.0995138 Jy ! Component: 200 - total flux cleaned = 0.108598 Jy ! Total flux subtracted in 200 components = 0.108598 Jy ! Clean residual min=-0.013870 max=0.015475 Jy/beam ! Clean residual mean=-0.000151 rms=0.004062 Jy/beam ! Combined flux in latest and established models = 0.387317 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 84 components and 0.387317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128638Jy sigma=0.000808 ! Fit after self-cal, rms=0.128570Jy sigma=0.000807 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.06 ! LA 0.97 MK 0.99 NL 0.96 OV 1.00 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.01 ! LA 0.93 MK 1.01 NL 1.19 OV 1.05 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.03 ! LA 0.74 MK 1.03 NL 1.42 OV 0.94 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.00* KP 1.00* ! LA 1.35 MK 0.98 NL 1.00* OV 1.00* ! PT 0.97 ! ! ! Fit before self-cal, rms=0.128570Jy sigma=0.000807 ! Fit after self-cal, rms=0.123668Jy sigma=0.000745 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=17.25 mas, bpa=-19.71 degrees ! Estimated noise=1119.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107373 Jy ! Component: 100 - total flux cleaned = -0.00106536 Jy ! Component: 150 - total flux cleaned = -0.00106651 Jy ! Component: 200 - total flux cleaned = -0.00107558 Jy ! Total flux subtracted in 200 components = -0.00107558 Jy ! Clean residual min=-0.006712 max=0.009470 Jy/beam ! Clean residual mean=0.000073 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.386242 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.386242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123441Jy sigma=0.000744 ! Fit after self-cal, rms=0.123801Jy sigma=0.000744 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123801Jy sigma=0.000744 ! Fit after self-cal, rms=0.124242Jy sigma=0.000722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.427 mas, bmaj=17.31 mas, bpa=-19.71 degrees ! Estimated noise=1119.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129185 Jy ! Component: 100 - total flux cleaned = -0.000168479 Jy ! Component: 150 - total flux cleaned = -0.000205613 Jy ! Component: 200 - total flux cleaned = -0.00027627 Jy ! Total flux subtracted in 200 components = -0.00027627 Jy ! Clean residual min=-0.004815 max=0.007699 Jy/beam ! Clean residual mean=-0.000046 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.385965 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.385965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124217Jy sigma=0.000721 ! Fit after self-cal, rms=0.124460Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674531 Jy ! Component: 100 - total flux cleaned = 0.00803679 Jy ! Component: 150 - total flux cleaned = 0.00859931 Jy ! Component: 200 - total flux cleaned = 0.00921863 Jy ! Total flux subtracted in 200 components = 0.00921863 Jy ! Clean residual min=-0.004304 max=0.005229 Jy/beam ! Clean residual mean=-0.000007 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 0.395184 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 144 components and 0.395184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124033Jy sigma=0.000718 ! Fit after self-cal, rms=0.124031Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124031Jy sigma=0.000718 ! Fit after self-cal, rms=0.124840Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=17.3 mas, bpa=-19.74 degrees ! Estimated noise=1114.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026207 Jy ! Component: 100 - total flux cleaned = 0.00312812 Jy ! Component: 150 - total flux cleaned = 0.00327496 Jy ! Component: 200 - total flux cleaned = 0.00320879 Jy ! Total flux subtracted in 200 components = 0.00320879 Jy ! Clean residual min=-0.003539 max=0.004212 Jy/beam ! Clean residual mean=-0.000021 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.398393 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 171 components and 0.398393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124728Jy sigma=0.000716 ! Fit after self-cal, rms=0.124793Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705954 Jy ! Component: 100 - total flux cleaned = 0.000819718 Jy ! Component: 150 - total flux cleaned = 0.000768769 Jy ! Component: 200 - total flux cleaned = 0.000812996 Jy ! Total flux subtracted in 200 components = 0.000812996 Jy ! Clean residual min=-0.003337 max=0.003939 Jy/beam ! Clean residual mean=-0.000015 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.399206 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 201 components and 0.399206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124751Jy sigma=0.000716 ! Fit after self-cal, rms=0.124755Jy sigma=0.000716 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124755Jy sigma=0.000716 ! Fit after self-cal, rms=0.124942Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.11 mas, bmaj=36.2 mas, bpa=-7.859 degrees ! Estimated noise=1349.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241678 Jy ! Component: 100 - total flux cleaned = 0.00248373 Jy ! Component: 150 - total flux cleaned = 0.00226967 Jy ! Component: 200 - total flux cleaned = 0.00208312 Jy ! Total flux subtracted in 200 components = 0.00208312 Jy ! Clean residual min=-0.003745 max=0.004885 Jy/beam ! Clean residual mean=-0.000031 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.401289 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 220 components and 0.401289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124913Jy sigma=0.000715 ! Fit after self-cal, rms=0.124937Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436652 Jy ! Component: 100 - total flux cleaned = 0.000481545 Jy ! Component: 150 - total flux cleaned = 0.000562128 Jy ! Component: 200 - total flux cleaned = 0.000525627 Jy ! Total flux subtracted in 200 components = 0.000525627 Jy ! Clean residual min=-0.003737 max=0.004649 Jy/beam ! Clean residual mean=-0.000025 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.401815 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 226 components and 0.401815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124928Jy sigma=0.000715 ! Fit after self-cal, rms=0.124925Jy sigma=0.000715 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=17.3 mas, bpa=-19.76 degrees ! Estimated noise=1112.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 17.3 at -19.76 degrees (North through East) ! Clean map min=-0.0045224 max=0.27132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=13.97 mas, bpa=-19.43 degrees ! Estimated noise=1971.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206745 Jy ! Component: 100 - total flux cleaned = 0.283614 Jy ! Component: 150 - total flux cleaned = 0.32391 Jy ! Component: 200 - total flux cleaned = 0.345481 Jy ! Total flux subtracted in 200 components = 0.345481 Jy ! Clean residual min=-0.008105 max=0.011676 Jy/beam ! Clean residual mean=-0.000057 rms=0.002514 Jy/beam ! Combined flux in latest and established models = 0.345481 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.345481 Jy ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=17.3 mas, bpa=-19.76 degrees ! Estimated noise=1112.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185051 Jy ! Component: 100 - total flux cleaned = 0.0298436 Jy ! Component: 150 - total flux cleaned = 0.0376814 Jy ! Component: 200 - total flux cleaned = 0.0433377 Jy ! Total flux subtracted in 200 components = 0.0433377 Jy ! Clean residual min=-0.003721 max=0.003797 Jy/beam ! Clean residual mean=-0.000045 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.388818 Jy ! Adding 112 model components to the UV plane model. ! The established model now contains 163 components and 0.388818 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.11 mas, bmaj=36.2 mas, bpa=-7.859 degrees ! Estimated noise=1349.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0061298 Jy ! Component: 100 - total flux cleaned = 0.00996626 Jy ! Component: 150 - total flux cleaned = 0.012483 Jy ! Component: 200 - total flux cleaned = 0.0136361 Jy ! Total flux subtracted in 200 components = 0.0136361 Jy ! Clean residual min=-0.003787 max=0.002857 Jy/beam ! Clean residual mean=-0.000020 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.402454 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661227 Jy ! Component: 100 - total flux cleaned = 0.00118459 Jy ! Component: 150 - total flux cleaned = 0.00156924 Jy ! Component: 200 - total flux cleaned = 0.00185568 Jy ! Total flux subtracted in 200 components = 0.00185568 Jy ! Clean residual min=-0.003724 max=0.002774 Jy/beam ! Clean residual mean=-0.000012 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.40431 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 238 components and 0.40431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.423 mas, bmaj=17.3 mas, bpa=-19.76 degrees ! Estimated noise=1112.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108885 Jy ! Component: 100 - total flux cleaned = -0.000253826 Jy ! Component: 150 - total flux cleaned = -0.000215102 Jy ! Component: 200 - total flux cleaned = -0.000112344 Jy ! Total flux subtracted in 200 components = -0.000112344 Jy ! Clean residual min=-0.003000 max=0.002895 Jy/beam ! Clean residual mean=-0.000007 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.404198 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 258 components and 0.404198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124762Jy sigma=0.000714 ! Fit after self-cal, rms=0.124736Jy sigma=0.000714 wmodel J2059-3645_S_2017_10_21_pus_map.mod ! Writing 258 model components to file: J2059-3645_S_2017_10_21_pus_map.mod wobs J2059-3645_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2059-3645_S_2017_10_21_pus_uvs.fits wwins J2059-3645_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J2059-3645_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000691269 Jy ! Component: 100 - total flux cleaned = -0.00097182 Jy ! Component: 150 - total flux cleaned = -0.00123236 Jy ! Component: 200 - total flux cleaned = -0.00135146 Jy ! Component: 250 - total flux cleaned = -0.00153578 Jy ! Component: 300 - total flux cleaned = -0.00153632 Jy ! Component: 350 - total flux cleaned = -0.00167113 Jy ! Component: 400 - total flux cleaned = -0.00167173 Jy ! Component: 450 - total flux cleaned = -0.00164093 Jy ! Component: 500 - total flux cleaned = -0.00164049 Jy ! Component: 550 - total flux cleaned = -0.00161199 Jy ! Component: 600 - total flux cleaned = -0.00155646 Jy ! Component: 650 - total flux cleaned = -0.00147488 Jy ! Component: 700 - total flux cleaned = -0.00142194 Jy ! Component: 750 - total flux cleaned = -0.00131845 Jy ! Component: 800 - total flux cleaned = -0.00124252 Jy ! Component: 850 - total flux cleaned = -0.00111904 Jy ! Component: 900 - total flux cleaned = -0.001071 Jy ! Component: 950 - total flux cleaned = -0.00104741 Jy ! Component: 1000 - total flux cleaned = -0.000977453 Jy ! Component: 1050 - total flux cleaned = -0.000818071 Jy ! Component: 1100 - total flux cleaned = -0.000729159 Jy ! Component: 1150 - total flux cleaned = -0.000707144 Jy ! Component: 1200 - total flux cleaned = -0.000599264 Jy ! Component: 1250 - total flux cleaned = -0.00057815 Jy ! Component: 1300 - total flux cleaned = -0.00055722 Jy ! Component: 1350 - total flux cleaned = -0.000474865 Jy ! Component: 1400 - total flux cleaned = -0.000536013 Jy ! Component: 1450 - total flux cleaned = -0.000515798 Jy ! Component: 1500 - total flux cleaned = -0.000535542 Jy ! Component: 1550 - total flux cleaned = -0.000496434 Jy ! Component: 1600 - total flux cleaned = -0.000496262 Jy ! Component: 1650 - total flux cleaned = -0.000515196 Jy ! Component: 1700 - total flux cleaned = -0.00051533 Jy ! Component: 1750 - total flux cleaned = -0.000534086 Jy ! Component: 1800 - total flux cleaned = -0.000534203 Jy ! Component: 1850 - total flux cleaned = -0.000515726 Jy ! Component: 1900 - total flux cleaned = -0.000515641 Jy ! Component: 1950 - total flux cleaned = -0.000462255 Jy ! Component: 2000 - total flux cleaned = -0.000480167 Jy ! Component: 2050 - total flux cleaned = -0.000480176 Jy ! Component: 2100 - total flux cleaned = -0.00048026 Jy ! Component: 2150 - total flux cleaned = -0.000480129 Jy ! Component: 2200 - total flux cleaned = -0.000463211 Jy ! Component: 2250 - total flux cleaned = -0.000496904 Jy ! Component: 2300 - total flux cleaned = -0.000446755 Jy ! Component: 2350 - total flux cleaned = -0.000463303 Jy ! Component: 2400 - total flux cleaned = -0.000463193 Jy ! Component: 2450 - total flux cleaned = -0.00047965 Jy ! Component: 2500 - total flux cleaned = -0.000479748 Jy ! Component: 2550 - total flux cleaned = -0.00052797 Jy ! Component: 2600 - total flux cleaned = -0.000511874 Jy ! Component: 2650 - total flux cleaned = -0.000527747 Jy ! Component: 2700 - total flux cleaned = -0.00054336 Jy ! Component: 2750 - total flux cleaned = -0.000543317 Jy ! Component: 2800 - total flux cleaned = -0.000496744 Jy ! Component: 2850 - total flux cleaned = -0.000512226 Jy ! Component: 2900 - total flux cleaned = -0.000512211 Jy ! Component: 2950 - total flux cleaned = -0.000512156 Jy ! Component: 3000 - total flux cleaned = -0.000527292 Jy ! Component: 3050 - total flux cleaned = -0.000512142 Jy ! Component: 3100 - total flux cleaned = -0.000497186 Jy ! Component: 3150 - total flux cleaned = -0.000556809 Jy ! Component: 3200 - total flux cleaned = -0.000571556 Jy ! Component: 3250 - total flux cleaned = -0.000571483 Jy ! Component: 3300 - total flux cleaned = -0.000571575 Jy ! Component: 3350 - total flux cleaned = -0.000615509 Jy ! Component: 3400 - total flux cleaned = -0.000673741 Jy ! Component: 3450 - total flux cleaned = -0.000702644 Jy ! Component: 3500 - total flux cleaned = -0.000760319 Jy ! Component: 3550 - total flux cleaned = -0.000774664 Jy ! Component: 3600 - total flux cleaned = -0.000874987 Jy ! Component: 3650 - total flux cleaned = -0.000874934 Jy ! Component: 3700 - total flux cleaned = -0.000917756 Jy ! Component: 3750 - total flux cleaned = -0.000960366 Jy ! Component: 3800 - total flux cleaned = -0.000988729 Jy ! Component: 3850 - total flux cleaned = -0.00105933 Jy ! Component: 3900 - total flux cleaned = -0.00105934 Jy ! Component: 3950 - total flux cleaned = -0.00114363 Jy ! Component: 4000 - total flux cleaned = -0.00118558 Jy ! Component: 4050 - total flux cleaned = -0.00125544 Jy ! Total flux subtracted in 4096 components = -0.00128336 Jy ! Clean residual min=-0.000816 max=0.000850 Jy/beam ! Clean residual mean=-0.000008 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.402914 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 504 components and 0.402914 Jy ![Exited script file: muppet] wmap "J2059-3645_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 17.3 at -19.76 degrees (North through East) ! Clean map min=-0.0027323 max=0.27508 Jy/beam ! Writing clean map to FITS file: J2059-3645_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.275085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000247544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.269965 0.269965 0.539931 1.07986 2.15972 4.31944 8.63889 17.2778 34.5556 69.1111 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.275 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.423 x 17.3 at -19.76 degrees (North through East) ! Clean map min=-0.0027323 max=0.27508 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2059-3645_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:06 2019