! Started logfile: J2047-0236_S_2017_02_24_pus_uvs.log on Sat May 4 11:35:10 2019 obs J2047-0236_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2047-0236_S_2017_02_24_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972468 visibilities/baseline/integration-bin. ! Found source: J2047-0236 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 19780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2047-0236_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 359 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929980Jy sigma=0.007422 ! Fit after self-cal, rms=0.917584Jy sigma=0.007332 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.695 mas, bmaj=7.075 mas, bpa=-4.533 degrees ! Estimated noise=869.492 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614195 Jy ! Component: 100 - total flux cleaned = 0.0761388 Jy ! Total flux subtracted in 100 components = 0.0761388 Jy ! Clean residual min=-0.010713 max=0.016387 Jy/beam ! Clean residual mean=0.000081 rms=0.003592 Jy/beam ! Combined flux in latest and established models = 0.0761388 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0761388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136306Jy sigma=0.001082 ! Fit after self-cal, rms=0.136178Jy sigma=0.001081 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.918 mas, bpa=-3.941 degrees ! Estimated noise=684.067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235599 Jy ! Component: 100 - total flux cleaned = 0.0374468 Jy ! Component: 150 - total flux cleaned = 0.0461787 Jy ! Component: 200 - total flux cleaned = 0.0518002 Jy ! Total flux subtracted in 200 components = 0.0518002 Jy ! Clean residual min=-0.018288 max=0.029406 Jy/beam ! Clean residual mean=0.000198 rms=0.007296 Jy/beam ! Combined flux in latest and established models = 0.127939 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 41 components and 0.127939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132182Jy sigma=0.001043 ! Fit after self-cal, rms=0.132052Jy sigma=0.001039 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.20 HN 1.78 KP 1.08 ! LA 0.63 MK 1.32 NL 2.37 OV 2.43 ! PT 0.51 SC 1.42 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.19 HN 1.50 KP 1.12 ! LA 0.62 MK 1.16 NL 2.18 OV 2.25 ! PT 0.50 SC 1.38 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.11 HN 1.62 KP 1.30 ! LA 0.66 MK 1.24 NL 2.49 OV 2.13 ! PT 0.51 SC 1.49 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.95 HN 1.47 KP 1.00* ! LA 0.53 MK 1.03 NL 1.00* OV 1.84 ! PT 0.66 SC 1.00* ! ! ! Fit before self-cal, rms=0.132052Jy sigma=0.001039 ! Fit after self-cal, rms=0.229942Jy sigma=0.000928 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=8.789 mas, bpa=-4.753 degrees ! Estimated noise=796.582 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279409 Jy ! Component: 100 - total flux cleaned = 0.0362909 Jy ! Component: 150 - total flux cleaned = 0.0412052 Jy ! Component: 200 - total flux cleaned = 0.0435933 Jy ! Total flux subtracted in 200 components = 0.0435933 Jy ! Clean residual min=-0.015448 max=0.018847 Jy/beam ! Clean residual mean=0.000007 rms=0.004457 Jy/beam ! Combined flux in latest and established models = 0.171532 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.171532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222193Jy sigma=0.000895 ! Fit after self-cal, rms=0.226484Jy sigma=0.000875 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226484Jy sigma=0.000875 ! Fit after self-cal, rms=0.210832Jy sigma=0.000851 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.615 mas, bpa=-4.158 degrees ! Estimated noise=773.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795485 Jy ! Component: 100 - total flux cleaned = 0.00848999 Jy ! Component: 150 - total flux cleaned = 0.008702 Jy ! Component: 200 - total flux cleaned = 0.00869539 Jy ! Total flux subtracted in 200 components = 0.00869539 Jy ! Clean residual min=-0.013850 max=0.019490 Jy/beam ! Clean residual mean=0.000058 rms=0.003958 Jy/beam ! Combined flux in latest and established models = 0.180228 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.180228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209720Jy sigma=0.000846 ! Fit after self-cal, rms=0.208036Jy sigma=0.000843 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163936 Jy ! Component: 100 - total flux cleaned = 0.0256195 Jy ! Component: 150 - total flux cleaned = 0.0326537 Jy ! Component: 200 - total flux cleaned = 0.0365575 Jy ! Total flux subtracted in 200 components = 0.0365575 Jy ! Clean residual min=-0.013387 max=0.016651 Jy/beam ! Clean residual mean=0.000019 rms=0.003903 Jy/beam ! Combined flux in latest and established models = 0.216785 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.216785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205585Jy sigma=0.000835 ! Fit after self-cal, rms=0.205313Jy sigma=0.000829 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205313Jy sigma=0.000829 ! Fit after self-cal, rms=0.197128Jy sigma=0.000818 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=8.658 mas, bpa=-3.718 degrees ! Estimated noise=745.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100477 Jy ! Component: 100 - total flux cleaned = 0.0138237 Jy ! Component: 150 - total flux cleaned = 0.0166695 Jy ! Component: 200 - total flux cleaned = 0.0174776 Jy ! Total flux subtracted in 200 components = 0.0174776 Jy ! Clean residual min=-0.012515 max=0.016577 Jy/beam ! Clean residual mean=0.000021 rms=0.003424 Jy/beam ! Combined flux in latest and established models = 0.234263 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.234263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196066Jy sigma=0.000814 ! Fit after self-cal, rms=0.196249Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47.5, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152217 Jy ! Component: 100 - total flux cleaned = 0.0226135 Jy ! Component: 150 - total flux cleaned = 0.0236766 Jy ! Component: 200 - total flux cleaned = 0.0243546 Jy ! Total flux subtracted in 200 components = 0.0243546 Jy ! Clean residual min=-0.012180 max=0.013459 Jy/beam ! Clean residual mean=-0.000011 rms=0.003213 Jy/beam ! Combined flux in latest and established models = 0.258617 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 140 components and 0.258617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194262Jy sigma=0.000800 ! Fit after self-cal, rms=0.194253Jy sigma=0.000796 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194253Jy sigma=0.000796 ! Fit after self-cal, rms=0.194065Jy sigma=0.000788 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.926 mas, bmaj=13.95 mas, bpa=-0.2745 degrees ! Estimated noise=793.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123055 Jy ! Component: 100 - total flux cleaned = 0.0150411 Jy ! Component: 150 - total flux cleaned = 0.0138076 Jy ! Component: 200 - total flux cleaned = 0.0131582 Jy ! Total flux subtracted in 200 components = 0.0131582 Jy ! Clean residual min=-0.015044 max=0.013654 Jy/beam ! Clean residual mean=-0.000015 rms=0.004215 Jy/beam ! Combined flux in latest and established models = 0.271776 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 170 components and 0.271776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193138Jy sigma=0.000785 ! Fit after self-cal, rms=0.193125Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704381 Jy ! Component: 100 - total flux cleaned = 0.000972375 Jy ! Component: 150 - total flux cleaned = 0.000594998 Jy ! Component: 200 - total flux cleaned = -0.000122024 Jy ! Total flux subtracted in 200 components = -0.000122024 Jy ! Clean residual min=-0.014630 max=0.013490 Jy/beam ! Clean residual mean=-0.000028 rms=0.004167 Jy/beam ! Combined flux in latest and established models = 0.271654 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 199 components and 0.271654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192601Jy sigma=0.000783 ! Fit after self-cal, rms=0.192576Jy sigma=0.000782 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.681 mas, bpa=-3.564 degrees ! Estimated noise=741.498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.681 at -3.564 degrees (North through East) ! Clean map min=-0.015394 max=0.092214 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.837 mas, bmaj=7.428 mas, bpa=-3.532 degrees ! Estimated noise=1046.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0697403 Jy ! Component: 100 - total flux cleaned = 0.101605 Jy ! Component: 150 - total flux cleaned = 0.125142 Jy ! Component: 200 - total flux cleaned = 0.144002 Jy ! Total flux subtracted in 200 components = 0.144002 Jy ! Clean residual min=-0.011850 max=0.016719 Jy/beam ! Clean residual mean=0.000049 rms=0.003530 Jy/beam ! Combined flux in latest and established models = 0.144002 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.144002 Jy ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.681 mas, bpa=-3.564 degrees ! Estimated noise=741.498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264228 Jy ! Component: 100 - total flux cleaned = 0.0450225 Jy ! Component: 150 - total flux cleaned = 0.059951 Jy ! Component: 200 - total flux cleaned = 0.0706033 Jy ! Total flux subtracted in 200 components = 0.0706033 Jy ! Clean residual min=-0.010475 max=0.013691 Jy/beam ! Clean residual mean=0.000045 rms=0.003576 Jy/beam ! Combined flux in latest and established models = 0.214605 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 67 components and 0.214605 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.926 mas, bmaj=13.95 mas, bpa=-0.2745 degrees ! Estimated noise=793.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157144 Jy ! Component: 100 - total flux cleaned = 0.0251144 Jy ! Component: 150 - total flux cleaned = 0.0298567 Jy ! Component: 200 - total flux cleaned = 0.0329617 Jy ! Total flux subtracted in 200 components = 0.0329617 Jy ! Clean residual min=-0.013816 max=0.017443 Jy/beam ! Clean residual mean=0.000006 rms=0.004552 Jy/beam ! Combined flux in latest and established models = 0.247567 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156195 Jy ! Component: 100 - total flux cleaned = 0.00325442 Jy ! Component: 150 - total flux cleaned = 0.00402991 Jy ! Component: 200 - total flux cleaned = 0.00450602 Jy ! Total flux subtracted in 200 components = 0.00450602 Jy ! Clean residual min=-0.013528 max=0.016153 Jy/beam ! Clean residual mean=-0.000010 rms=0.004284 Jy/beam ! Combined flux in latest and established models = 0.252073 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 139 components and 0.252073 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.538 mas, bmaj=8.681 mas, bpa=-3.564 degrees ! Estimated noise=741.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136384 Jy ! Component: 100 - total flux cleaned = 0.00160901 Jy ! Component: 150 - total flux cleaned = 0.00183968 Jy ! Component: 200 - total flux cleaned = 0.00204204 Jy ! Total flux subtracted in 200 components = 0.00204204 Jy ! Clean residual min=-0.010004 max=0.011863 Jy/beam ! Clean residual mean=-0.000009 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 0.254115 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 0.254115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192120Jy sigma=0.000777 ! Fit after self-cal, rms=0.192217Jy sigma=0.000773 wmodel J2047-0236_S_2017_02_24_pus_map.mod ! Writing 166 model components to file: J2047-0236_S_2017_02_24_pus_map.mod wobs J2047-0236_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2047-0236_S_2017_02_24_pus_uvs.fits wwins J2047-0236_S_2017_02_24_pus_map.win ! wwins: Wrote 5 windows to J2047-0236_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423293 Jy ! Component: 100 - total flux cleaned = 0.00722499 Jy ! Component: 150 - total flux cleaned = 0.00967289 Jy ! Component: 200 - total flux cleaned = 0.0121672 Jy ! Component: 250 - total flux cleaned = 0.0145438 Jy ! Component: 300 - total flux cleaned = 0.0171199 Jy ! Component: 350 - total flux cleaned = 0.0193065 Jy ! Component: 400 - total flux cleaned = 0.0207222 Jy ! Component: 450 - total flux cleaned = 0.0218253 Jy ! Component: 500 - total flux cleaned = 0.0228999 Jy ! Component: 550 - total flux cleaned = 0.0240778 Jy ! Component: 600 - total flux cleaned = 0.0249737 Jy ! Component: 650 - total flux cleaned = 0.0258494 Jy ! Component: 700 - total flux cleaned = 0.0262195 Jy ! Component: 750 - total flux cleaned = 0.0270658 Jy ! Component: 800 - total flux cleaned = 0.0277793 Jy ! Component: 850 - total flux cleaned = 0.0287154 Jy ! Component: 900 - total flux cleaned = 0.0295227 Jy ! Component: 950 - total flux cleaned = 0.0303211 Jy ! Component: 1000 - total flux cleaned = 0.0314452 Jy ! Component: 1050 - total flux cleaned = 0.0324432 Jy ! Component: 1100 - total flux cleaned = 0.0330994 Jy ! Component: 1150 - total flux cleaned = 0.033749 Jy ! Component: 1200 - total flux cleaned = 0.0350287 Jy ! Component: 1250 - total flux cleaned = 0.0355539 Jy ! Component: 1300 - total flux cleaned = 0.0361799 Jy ! Component: 1350 - total flux cleaned = 0.0366976 Jy ! Component: 1400 - total flux cleaned = 0.0378204 Jy ! Component: 1450 - total flux cleaned = 0.0380215 Jy ! Component: 1500 - total flux cleaned = 0.0383219 Jy ! Component: 1550 - total flux cleaned = 0.0385216 Jy ! Component: 1600 - total flux cleaned = 0.0391132 Jy ! Component: 1650 - total flux cleaned = 0.0393071 Jy ! Component: 1700 - total flux cleaned = 0.0395973 Jy ! Component: 1750 - total flux cleaned = 0.0401714 Jy ! Component: 1800 - total flux cleaned = 0.0407398 Jy ! Component: 1850 - total flux cleaned = 0.0411155 Jy ! Component: 1900 - total flux cleaned = 0.0413962 Jy ! Component: 1950 - total flux cleaned = 0.0420416 Jy ! Component: 2000 - total flux cleaned = 0.0425904 Jy ! Component: 2050 - total flux cleaned = 0.0431326 Jy ! Component: 2100 - total flux cleaned = 0.0434936 Jy ! Component: 2150 - total flux cleaned = 0.0440277 Jy ! Component: 2200 - total flux cleaned = 0.0446455 Jy ! Component: 2250 - total flux cleaned = 0.044995 Jy ! Component: 2300 - total flux cleaned = 0.0454296 Jy ! Component: 2350 - total flux cleaned = 0.0456883 Jy ! Component: 2400 - total flux cleaned = 0.0463729 Jy ! Component: 2450 - total flux cleaned = 0.0467973 Jy ! Component: 2500 - total flux cleaned = 0.0469662 Jy ! Component: 2550 - total flux cleaned = 0.0476345 Jy ! Component: 2600 - total flux cleaned = 0.0479659 Jy ! Component: 2650 - total flux cleaned = 0.0482116 Jy ! Component: 2700 - total flux cleaned = 0.0487002 Jy ! Component: 2750 - total flux cleaned = 0.0491048 Jy ! Component: 2800 - total flux cleaned = 0.0495051 Jy ! Component: 2850 - total flux cleaned = 0.0497444 Jy ! Component: 2900 - total flux cleaned = 0.0500601 Jy ! Component: 2950 - total flux cleaned = 0.0502166 Jy ! Component: 3000 - total flux cleaned = 0.0509158 Jy ! Component: 3050 - total flux cleaned = 0.0513021 Jy ! Component: 3100 - total flux cleaned = 0.0516847 Jy ! Component: 3150 - total flux cleaned = 0.0519128 Jy ! Component: 3200 - total flux cleaned = 0.0523665 Jy ! Component: 3250 - total flux cleaned = 0.0529669 Jy ! Component: 3300 - total flux cleaned = 0.0533395 Jy ! Component: 3350 - total flux cleaned = 0.0533383 Jy ! Component: 3400 - total flux cleaned = 0.0537062 Jy ! Component: 3450 - total flux cleaned = 0.0539983 Jy ! Component: 3500 - total flux cleaned = 0.0543611 Jy ! Component: 3550 - total flux cleaned = 0.0547219 Jy ! Component: 3600 - total flux cleaned = 0.0551513 Jy ! Component: 3650 - total flux cleaned = 0.0554357 Jy ! Component: 3700 - total flux cleaned = 0.0557182 Jy ! Component: 3750 - total flux cleaned = 0.0559294 Jy ! Component: 3800 - total flux cleaned = 0.0567667 Jy ! Component: 3850 - total flux cleaned = 0.057044 Jy ! Component: 3900 - total flux cleaned = 0.0573199 Jy ! Component: 3950 - total flux cleaned = 0.057663 Jy ! Component: 4000 - total flux cleaned = 0.0582759 Jy ! Component: 4050 - total flux cleaned = 0.0587497 Jy ! Total flux subtracted in 4096 components = 0.0590186 Jy ! Clean residual min=-0.003748 max=0.003449 Jy/beam ! Clean residual mean=-0.000005 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.313133 Jy keep ! Adding 368 model components to the UV plane model. ! The established model now contains 534 components and 0.313134 Jy ![Exited script file: muppet] wmap "J2047-0236_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.681 at -3.564 degrees (North through East) ! Clean map min=-0.011772 max=0.092631 Jy/beam ! Writing clean map to FITS file: J2047-0236_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0926308 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00143565 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.6496 4.6496 9.2992 18.5984 37.1968 74.3936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.538 x 8.681 at -3.564 degrees (North through East) ! Clean map min=-0.011772 max=0.092631 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2047-0236_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:35:15 2019