! Started logfile: J2046-1152_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:20 2019 obs J2046-1152_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2046-1152_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.540038 visibilities/baseline/integration-bin. ! Found source: J2046-1152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11276 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2046-1152_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 364 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1000 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984165Jy sigma=0.008129 ! Fit after self-cal, rms=0.946227Jy sigma=0.007816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=15.61 mas, bpa=-15.54 degrees ! Estimated noise=2017.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04052 Jy ! Component: 100 - total flux cleaned = 0.0513719 Jy ! Total flux subtracted in 100 components = 0.0513719 Jy ! Clean residual min=-0.006223 max=0.006551 Jy/beam ! Clean residual mean=-0.000014 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.0513719 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0513719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082101Jy sigma=0.000636 ! Fit after self-cal, rms=0.081383Jy sigma=0.000631 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=18.22 mas, bpa=-15.2 degrees ! Estimated noise=969.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00772436 Jy ! Component: 100 - total flux cleaned = 0.011837 Jy ! Component: 150 - total flux cleaned = 0.0144454 Jy ! Component: 200 - total flux cleaned = 0.0161366 Jy ! Total flux subtracted in 200 components = 0.0161366 Jy ! Clean residual min=-0.003188 max=0.003237 Jy/beam ! Clean residual mean=-0.000001 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.0675086 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 45 components and 0.0675086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080588Jy sigma=0.000625 ! Fit after self-cal, rms=0.080497Jy sigma=0.000624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.88 HN 0.98 KP 1.04 ! LA 1.00 MK 1.25 NL 1.07 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.42 FD 1.00 HN 1.05 KP 0.99 ! LA 0.98 MK 1.10 NL 1.07 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.07 KP 0.93 ! LA 0.79 MK 1.08 NL 1.14 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.73 HN 1.01 KP 1.00* ! LA 1.00* MK 0.64 NL 1.00* OV 1.00* ! PT 1.19 ! ! ! Fit before self-cal, rms=0.080497Jy sigma=0.000624 ! Fit after self-cal, rms=0.080053Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=18.26 mas, bpa=-14.91 degrees ! Estimated noise=978.165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107512 Jy ! Component: 100 - total flux cleaned = -0.000158881 Jy ! Component: 150 - total flux cleaned = -0.000179117 Jy ! Component: 200 - total flux cleaned = -0.0001794 Jy ! Total flux subtracted in 200 components = -0.0001794 Jy ! Clean residual min=-0.002572 max=0.002536 Jy/beam ! Clean residual mean=0.000015 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0673292 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0673292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080040Jy sigma=0.000621 ! Fit after self-cal, rms=0.080053Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080053Jy sigma=0.000620 ! Fit after self-cal, rms=0.080471Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=18.25 mas, bpa=-14.92 degrees ! Estimated noise=975.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389773 Jy ! Component: 100 - total flux cleaned = -0.000473348 Jy ! Component: 150 - total flux cleaned = -0.000508933 Jy ! Component: 200 - total flux cleaned = -0.000523505 Jy ! Total flux subtracted in 200 components = -0.000523505 Jy ! Clean residual min=-0.002408 max=0.002211 Jy/beam ! Clean residual mean=0.000007 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0668057 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.0668057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080461Jy sigma=0.000620 ! Fit after self-cal, rms=0.080512Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51289e-05 Jy ! Component: 100 - total flux cleaned = 4.38469e-05 Jy ! Component: 150 - total flux cleaned = 2.84758e-05 Jy ! Component: 200 - total flux cleaned = 2.8471e-05 Jy ! Total flux subtracted in 200 components = 2.8471e-05 Jy ! Clean residual min=-0.002374 max=0.002182 Jy/beam ! Clean residual mean=0.000009 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0668342 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.0668341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080506Jy sigma=0.000619 ! Fit after self-cal, rms=0.080485Jy sigma=0.000619 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080485Jy sigma=0.000619 ! Fit after self-cal, rms=0.080667Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=18.25 mas, bpa=-14.93 degrees ! Estimated noise=973.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000412202 Jy ! Component: 100 - total flux cleaned = -0.000484193 Jy ! Component: 150 - total flux cleaned = -0.000499027 Jy ! Component: 200 - total flux cleaned = -0.000499727 Jy ! Total flux subtracted in 200 components = -0.000499727 Jy ! Clean residual min=-0.002278 max=0.002057 Jy/beam ! Clean residual mean=0.000006 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.0663344 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.0663344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080660Jy sigma=0.000619 ! Fit after self-cal, rms=0.080687Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.94328e-05 Jy ! Component: 100 - total flux cleaned = -3.02746e-05 Jy ! Component: 150 - total flux cleaned = -3.11582e-05 Jy ! Component: 200 - total flux cleaned = -4.23027e-05 Jy ! Total flux subtracted in 200 components = -4.23027e-05 Jy ! Clean residual min=-0.002257 max=0.002040 Jy/beam ! Clean residual mean=0.000007 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0662921 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 91 components and 0.0662921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080683Jy sigma=0.000619 ! Fit after self-cal, rms=0.080688Jy sigma=0.000619 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080688Jy sigma=0.000619 ! Fit after self-cal, rms=0.080943Jy sigma=0.000619 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.821 mas, bmaj=19.41 mas, bpa=-12.3 degrees ! Estimated noise=1112.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000170907 Jy ! Component: 100 - total flux cleaned = -0.000195171 Jy ! Component: 150 - total flux cleaned = -0.000215406 Jy ! Component: 200 - total flux cleaned = -0.000241451 Jy ! Total flux subtracted in 200 components = -0.000241451 Jy ! Clean residual min=-0.002581 max=0.002348 Jy/beam ! Clean residual mean=0.000011 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0660507 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.0660506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080940Jy sigma=0.000619 ! Fit after self-cal, rms=0.080958Jy sigma=0.000619 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.06723e-06 Jy ! Component: 100 - total flux cleaned = 2.35871e-06 Jy ! Component: 150 - total flux cleaned = -2.18745e-05 Jy ! Component: 200 - total flux cleaned = -4.2195e-05 Jy ! Total flux subtracted in 200 components = -4.2195e-05 Jy ! Clean residual min=-0.002584 max=0.002351 Jy/beam ! Clean residual mean=0.000012 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0660084 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 102 components and 0.0660084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080955Jy sigma=0.000619 ! Fit after self-cal, rms=0.080955Jy sigma=0.000619 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=18.29 mas, bpa=-14.96 degrees ! Estimated noise=971.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 18.29 at -14.96 degrees (North through East) ! Clean map min=-0.0022685 max=0.056303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=15.69 mas, bpa=-15.24 degrees ! Estimated noise=2048.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410682 Jy ! Component: 100 - total flux cleaned = 0.0523789 Jy ! Component: 150 - total flux cleaned = 0.0585746 Jy ! Component: 200 - total flux cleaned = 0.0626121 Jy ! Total flux subtracted in 200 components = 0.0626121 Jy ! Clean residual min=-0.004690 max=0.004766 Jy/beam ! Clean residual mean=-0.000002 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.0626121 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0626121 Jy ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=18.29 mas, bpa=-14.96 degrees ! Estimated noise=971.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217363 Jy ! Component: 100 - total flux cleaned = 0.00266236 Jy ! Component: 150 - total flux cleaned = 0.00293696 Jy ! Component: 200 - total flux cleaned = 0.00289944 Jy ! Total flux subtracted in 200 components = 0.00289944 Jy ! Clean residual min=-0.002936 max=0.002232 Jy/beam ! Clean residual mean=0.000004 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0655115 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 46 components and 0.0655115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.821 mas, bmaj=19.41 mas, bpa=-12.3 degrees ! Estimated noise=1112.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000486329 Jy ! Component: 100 - total flux cleaned = 0.000482312 Jy ! Component: 150 - total flux cleaned = 0.000481486 Jy ! Component: 200 - total flux cleaned = 0.000480792 Jy ! Total flux subtracted in 200 components = 0.000480792 Jy ! Clean residual min=-0.002715 max=0.002349 Jy/beam ! Clean residual mean=0.000010 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0659923 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53331e-05 Jy ! Component: 100 - total flux cleaned = -1.55886e-05 Jy ! Component: 150 - total flux cleaned = -2.96002e-05 Jy ! Component: 200 - total flux cleaned = -2.98055e-05 Jy ! Total flux subtracted in 200 components = -2.98055e-05 Jy ! Clean residual min=-0.002689 max=0.002342 Jy/beam ! Clean residual mean=0.000010 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0659625 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.0659625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.841 mas, bmaj=18.29 mas, bpa=-14.96 degrees ! Estimated noise=971.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106244 Jy ! Component: 100 - total flux cleaned = -1.35869e-06 Jy ! Component: 150 - total flux cleaned = -0.000121535 Jy ! Component: 200 - total flux cleaned = -0.000228499 Jy ! Total flux subtracted in 200 components = -0.000228499 Jy ! Clean residual min=-0.002671 max=0.002146 Jy/beam ! Clean residual mean=0.000006 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.065734 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.065734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080979Jy sigma=0.000619 ! Fit after self-cal, rms=0.080978Jy sigma=0.000619 wmodel J2046-1152_S_2017_10_09_pus_map.mod ! Writing 66 model components to file: J2046-1152_S_2017_10_09_pus_map.mod wobs J2046-1152_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2046-1152_S_2017_10_09_pus_uvs.fits wwins J2046-1152_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2046-1152_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000606267 Jy ! Component: 100 - total flux cleaned = -0.00057364 Jy ! Component: 150 - total flux cleaned = -0.000339481 Jy ! Component: 200 - total flux cleaned = -0.000117512 Jy ! Component: 250 - total flux cleaned = 0.000183819 Jy ! Component: 300 - total flux cleaned = 0.000414997 Jy ! Component: 350 - total flux cleaned = 0.000526445 Jy ! Component: 400 - total flux cleaned = 0.000713815 Jy ! Component: 450 - total flux cleaned = 0.000841984 Jy ! Component: 500 - total flux cleaned = 0.000916795 Jy ! Component: 550 - total flux cleaned = 0.00108346 Jy ! Component: 600 - total flux cleaned = 0.00119832 Jy ! Component: 650 - total flux cleaned = 0.0013545 Jy ! Component: 700 - total flux cleaned = 0.0014839 Jy ! Component: 750 - total flux cleaned = 0.00165124 Jy ! Component: 800 - total flux cleaned = 0.00173252 Jy ! Component: 850 - total flux cleaned = 0.00181218 Jy ! Component: 900 - total flux cleaned = 0.00185088 Jy ! Component: 950 - total flux cleaned = 0.00188896 Jy ! Component: 1000 - total flux cleaned = 0.00194371 Jy ! Component: 1050 - total flux cleaned = 0.00197951 Jy ! Component: 1100 - total flux cleaned = 0.00199711 Jy ! Component: 1150 - total flux cleaned = 0.00208289 Jy ! Component: 1200 - total flux cleaned = 0.0021324 Jy ! Component: 1250 - total flux cleaned = 0.00223079 Jy ! Component: 1300 - total flux cleaned = 0.00237579 Jy ! Component: 1350 - total flux cleaned = 0.00245493 Jy ! Component: 1400 - total flux cleaned = 0.00262594 Jy ! Component: 1450 - total flux cleaned = 0.00274778 Jy ! Component: 1500 - total flux cleaned = 0.00285271 Jy ! Component: 1550 - total flux cleaned = 0.00294153 Jy ! Component: 1600 - total flux cleaned = 0.00305804 Jy ! Component: 1650 - total flux cleaned = 0.00317287 Jy ! Component: 1700 - total flux cleaned = 0.00329985 Jy ! Component: 1750 - total flux cleaned = 0.00336916 Jy ! Component: 1800 - total flux cleaned = 0.00347899 Jy ! Component: 1850 - total flux cleaned = 0.00353288 Jy ! Component: 1900 - total flux cleaned = 0.00362633 Jy ! Component: 1950 - total flux cleaned = 0.00367907 Jy ! Component: 2000 - total flux cleaned = 0.00376983 Jy ! Component: 2050 - total flux cleaned = 0.00384654 Jy ! Component: 2100 - total flux cleaned = 0.00382094 Jy ! Component: 2150 - total flux cleaned = 0.00384618 Jy ! Component: 2200 - total flux cleaned = 0.00385874 Jy ! Component: 2250 - total flux cleaned = 0.00390747 Jy ! Component: 2300 - total flux cleaned = 0.00391947 Jy ! Component: 2350 - total flux cleaned = 0.00394341 Jy ! Component: 2400 - total flux cleaned = 0.0039434 Jy ! Component: 2450 - total flux cleaned = 0.00395522 Jy ! Component: 2500 - total flux cleaned = 0.00393213 Jy ! Component: 2550 - total flux cleaned = 0.00394368 Jy ! Component: 2600 - total flux cleaned = 0.00393234 Jy ! Component: 2650 - total flux cleaned = 0.00395484 Jy ! Component: 2700 - total flux cleaned = 0.00391031 Jy ! Component: 2750 - total flux cleaned = 0.00392137 Jy ! Component: 2800 - total flux cleaned = 0.00392142 Jy ! Component: 2850 - total flux cleaned = 0.00392143 Jy ! Component: 2900 - total flux cleaned = 0.00393219 Jy ! Component: 2950 - total flux cleaned = 0.00393218 Jy ! Component: 3000 - total flux cleaned = 0.003911 Jy ! Component: 3050 - total flux cleaned = 0.00393212 Jy ! Component: 3100 - total flux cleaned = 0.00396344 Jy ! Component: 3150 - total flux cleaned = 0.00395302 Jy ! Component: 3200 - total flux cleaned = 0.00396336 Jy ! Component: 3250 - total flux cleaned = 0.00398394 Jy ! Component: 3300 - total flux cleaned = 0.00399416 Jy ! Component: 3350 - total flux cleaned = 0.0040248 Jy ! Component: 3400 - total flux cleaned = 0.00405525 Jy ! Component: 3450 - total flux cleaned = 0.00405523 Jy ! Component: 3500 - total flux cleaned = 0.00406536 Jy ! Component: 3550 - total flux cleaned = 0.00410559 Jy ! Component: 3600 - total flux cleaned = 0.00412568 Jy ! Component: 3650 - total flux cleaned = 0.00412564 Jy ! Component: 3700 - total flux cleaned = 0.00415548 Jy ! Component: 3750 - total flux cleaned = 0.00417528 Jy ! Component: 3800 - total flux cleaned = 0.00420497 Jy ! Component: 3850 - total flux cleaned = 0.00420495 Jy ! Component: 3900 - total flux cleaned = 0.00418532 Jy ! Component: 3950 - total flux cleaned = 0.00424425 Jy ! Component: 4000 - total flux cleaned = 0.00424418 Jy ! Component: 4050 - total flux cleaned = 0.0042637 Jy ! Total flux subtracted in 4096 components = 0.00428319 Jy ! Clean residual min=-0.000683 max=0.000534 Jy/beam ! Clean residual mean=0.000002 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0700172 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 358 components and 0.0700172 Jy ![Exited script file: muppet] wmap "J2046-1152_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 18.29 at -14.96 degrees (North through East) ! Clean map min=-0.0016293 max=0.055556 Jy/beam ! Writing clean map to FITS file: J2046-1152_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0555555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180349 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.973884 0.973884 1.94777 3.89554 7.79108 15.5822 31.1643 62.3286 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.841 x 18.29 at -14.96 degrees (North through East) ! Clean map min=-0.0016293 max=0.055556 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2046-1152_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:20:26 2019