! Started logfile: J2045+7625_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:15 2019 obs J2045+7625_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2045+7625_S_2017_10_09_pus_uva.fits ! AN table 1: 218 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.760958 visibilities/baseline/integration-bin. ! Found source: J2045+7625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 23888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2045+7625_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 416 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 446 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 897 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944543Jy sigma=0.007884 ! Fit after self-cal, rms=0.927055Jy sigma=0.007770 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=3.667 mas, bpa=81.07 degrees ! Estimated noise=1145.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575162 Jy ! Component: 100 - total flux cleaned = 0.0707868 Jy ! Total flux subtracted in 100 components = 0.0707868 Jy ! Clean residual min=-0.003952 max=0.005041 Jy/beam ! Clean residual mean=-0.000057 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0707868 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0707868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091836Jy sigma=0.000653 ! Fit after self-cal, rms=0.091745Jy sigma=0.000653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=4.494 mas, bpa=79.56 degrees ! Estimated noise=658.398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606905 Jy ! Component: 100 - total flux cleaned = 0.00893833 Jy ! Component: 150 - total flux cleaned = 0.0105098 Jy ! Component: 200 - total flux cleaned = 0.0113814 Jy ! Total flux subtracted in 200 components = 0.0113814 Jy ! Clean residual min=-0.002887 max=0.002405 Jy/beam ! Clean residual mean=-0.000057 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.0821682 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.0821682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091233Jy sigma=0.000650 ! Fit after self-cal, rms=0.091215Jy sigma=0.000650 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.96 KP 1.05 ! LA 1.01 MK 0.98 NL 0.64 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.10 HN 1.06 KP 1.02 ! LA 1.00 MK 1.00 NL 1.33 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 HN 1.08 KP 0.88 ! LA 0.80 MK 1.00 NL 1.00 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 0.97 KP 1.00* ! LA 0.79 MK 1.10 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.091215Jy sigma=0.000650 ! Fit after self-cal, rms=0.086509Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=4.526 mas, bpa=79.75 degrees ! Estimated noise=658.797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127409 Jy ! Component: 100 - total flux cleaned = 0.000144574 Jy ! Component: 150 - total flux cleaned = 0.000152371 Jy ! Component: 200 - total flux cleaned = 0.000152294 Jy ! Total flux subtracted in 200 components = 0.000152294 Jy ! Clean residual min=-0.002205 max=0.002048 Jy/beam ! Clean residual mean=-0.000029 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0823205 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.0823205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086507Jy sigma=0.000646 ! Fit after self-cal, rms=0.086394Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086394Jy sigma=0.000646 ! Fit after self-cal, rms=0.088369Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=4.542 mas, bpa=78.54 degrees ! Estimated noise=658.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118816 Jy ! Component: 100 - total flux cleaned = -0.000136073 Jy ! Component: 150 - total flux cleaned = -0.00014333 Jy ! Component: 200 - total flux cleaned = -0.000137137 Jy ! Total flux subtracted in 200 components = -0.000137137 Jy ! Clean residual min=-0.001835 max=0.001642 Jy/beam ! Clean residual mean=-0.000028 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0821833 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0821833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088367Jy sigma=0.000645 ! Fit after self-cal, rms=0.088438Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.11535e-08 Jy ! Component: 100 - total flux cleaned = 3.51873e-07 Jy ! Component: 150 - total flux cleaned = 4.88604e-07 Jy ! Component: 200 - total flux cleaned = -4.53896e-06 Jy ! Total flux subtracted in 200 components = -4.53896e-06 Jy ! Clean residual min=-0.001883 max=0.001640 Jy/beam ! Clean residual mean=-0.000029 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0821788 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0821788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088438Jy sigma=0.000644 ! Fit after self-cal, rms=0.088438Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088438Jy sigma=0.000644 ! Fit after self-cal, rms=0.089059Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.913 mas, bmaj=4.553 mas, bpa=78.34 degrees ! Estimated noise=659.034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77242e-05 Jy ! Component: 100 - total flux cleaned = -0.000112006 Jy ! Component: 150 - total flux cleaned = -0.000112196 Jy ! Component: 200 - total flux cleaned = -0.000112003 Jy ! Total flux subtracted in 200 components = -0.000112003 Jy ! Clean residual min=-0.001838 max=0.001645 Jy/beam ! Clean residual mean=-0.000027 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0820668 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0820668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089057Jy sigma=0.000644 ! Fit after self-cal, rms=0.089063Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79707e-05 Jy ! Component: 100 - total flux cleaned = 1.23601e-05 Jy ! Component: 150 - total flux cleaned = 1.23887e-05 Jy ! Component: 200 - total flux cleaned = 1.25008e-05 Jy ! Total flux subtracted in 200 components = 1.25008e-05 Jy ! Clean residual min=-0.001818 max=0.001660 Jy/beam ! Clean residual mean=-0.000027 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0820793 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0820793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089062Jy sigma=0.000644 ! Fit after self-cal, rms=0.089062Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089062Jy sigma=0.000644 ! Fit after self-cal, rms=0.089159Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.87 mas, bmaj=9.79 mas, bpa=84.23 degrees ! Estimated noise=866.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03868e-05 Jy ! Component: 100 - total flux cleaned = -8.29389e-07 Jy ! Component: 150 - total flux cleaned = -9.95834e-06 Jy ! Component: 200 - total flux cleaned = -1.74975e-05 Jy ! Total flux subtracted in 200 components = -1.74975e-05 Jy ! Clean residual min=-0.002188 max=0.002110 Jy/beam ! Clean residual mean=-0.000059 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0820618 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 46 components and 0.0820618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089158Jy sigma=0.000644 ! Fit after self-cal, rms=0.089162Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70055e-05 Jy ! Component: 100 - total flux cleaned = 1.91071e-05 Jy ! Component: 150 - total flux cleaned = 1.28569e-05 Jy ! Component: 200 - total flux cleaned = 1.2927e-05 Jy ! Total flux subtracted in 200 components = 1.2927e-05 Jy ! Clean residual min=-0.002188 max=0.002111 Jy/beam ! Clean residual mean=-0.000059 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0820747 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.0820747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089162Jy sigma=0.000644 ! Fit after self-cal, rms=0.089162Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=4.563 mas, bpa=78.29 degrees ! Estimated noise=659.212 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.91 x 4.563 at 78.29 degrees (North through East) ! Clean map min=-0.0017814 max=0.074931 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.117 mas, bmaj=3.727 mas, bpa=79.07 degrees ! Estimated noise=1147.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0574809 Jy ! Component: 100 - total flux cleaned = 0.0705425 Jy ! Component: 150 - total flux cleaned = 0.075814 Jy ! Component: 200 - total flux cleaned = 0.0787364 Jy ! Total flux subtracted in 200 components = 0.0787364 Jy ! Clean residual min=-0.003143 max=0.002959 Jy/beam ! Clean residual mean=-0.000027 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.0787364 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0787364 Jy ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=4.563 mas, bpa=78.29 degrees ! Estimated noise=659.212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177241 Jy ! Component: 100 - total flux cleaned = 0.00262454 Jy ! Component: 150 - total flux cleaned = 0.00303769 Jy ! Component: 200 - total flux cleaned = 0.00309227 Jy ! Total flux subtracted in 200 components = 0.00309227 Jy ! Clean residual min=-0.001874 max=0.001628 Jy/beam ! Clean residual mean=-0.000028 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0818287 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.0818287 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.87 mas, bmaj=9.79 mas, bpa=84.23 degrees ! Estimated noise=866.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253875 Jy ! Component: 100 - total flux cleaned = 0.000253729 Jy ! Component: 150 - total flux cleaned = 0.000257765 Jy ! Component: 200 - total flux cleaned = 0.000260996 Jy ! Total flux subtracted in 200 components = 0.000260996 Jy ! Clean residual min=-0.002185 max=0.002112 Jy/beam ! Clean residual mean=-0.000059 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0820897 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.27328e-08 Jy ! Component: 100 - total flux cleaned = 2.63617e-06 Jy ! Component: 150 - total flux cleaned = 2.70419e-06 Jy ! Component: 200 - total flux cleaned = 4.76771e-06 Jy ! Total flux subtracted in 200 components = 4.76771e-06 Jy ! Clean residual min=-0.002188 max=0.002110 Jy/beam ! Clean residual mean=-0.000059 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0820944 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.0820944 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.91 mas, bmaj=4.563 mas, bpa=78.29 degrees ! Estimated noise=659.212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.90334e-05 Jy ! Component: 100 - total flux cleaned = -0.000114238 Jy ! Component: 150 - total flux cleaned = -0.000129127 Jy ! Component: 200 - total flux cleaned = -0.000135027 Jy ! Total flux subtracted in 200 components = -0.000135027 Jy ! Clean residual min=-0.001857 max=0.001645 Jy/beam ! Clean residual mean=-0.000027 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.0819594 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0819594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089161Jy sigma=0.000644 ! Fit after self-cal, rms=0.089158Jy sigma=0.000644 wmodel J2045+7625_S_2017_10_09_pus_map.mod ! Writing 47 model components to file: J2045+7625_S_2017_10_09_pus_map.mod wobs J2045+7625_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2045+7625_S_2017_10_09_pus_uvs.fits wwins J2045+7625_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2045+7625_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208967 Jy ! Component: 100 - total flux cleaned = -0.000442626 Jy ! Component: 150 - total flux cleaned = -0.000553059 Jy ! Component: 200 - total flux cleaned = -0.000659763 Jy ! Component: 250 - total flux cleaned = -0.000787878 Jy ! Component: 300 - total flux cleaned = -0.000861094 Jy ! Component: 350 - total flux cleaned = -0.000932868 Jy ! Component: 400 - total flux cleaned = -0.00102559 Jy ! Component: 450 - total flux cleaned = -0.00111526 Jy ! Component: 500 - total flux cleaned = -0.00120185 Jy ! Component: 550 - total flux cleaned = -0.0012223 Jy ! Component: 600 - total flux cleaned = -0.00134603 Jy ! Component: 650 - total flux cleaned = -0.00134539 Jy ! Component: 700 - total flux cleaned = -0.0014437 Jy ! Component: 750 - total flux cleaned = -0.00152024 Jy ! Component: 800 - total flux cleaned = -0.00161415 Jy ! Component: 850 - total flux cleaned = -0.00170613 Jy ! Component: 900 - total flux cleaned = -0.00179586 Jy ! Component: 950 - total flux cleaned = -0.0018841 Jy ! Component: 1000 - total flux cleaned = -0.00186644 Jy ! Component: 1050 - total flux cleaned = -0.00191731 Jy ! Component: 1100 - total flux cleaned = -0.00193421 Jy ! Component: 1150 - total flux cleaned = -0.00201669 Jy ! Component: 1200 - total flux cleaned = -0.00204904 Jy ! Component: 1250 - total flux cleaned = -0.00216062 Jy ! Component: 1300 - total flux cleaned = -0.00219174 Jy ! Component: 1350 - total flux cleaned = -0.00226889 Jy ! Component: 1400 - total flux cleaned = -0.00226893 Jy ! Component: 1450 - total flux cleaned = -0.00231411 Jy ! Component: 1500 - total flux cleaned = -0.00240311 Jy ! Component: 1550 - total flux cleaned = -0.0024469 Jy ! Component: 1600 - total flux cleaned = -0.00250492 Jy ! Component: 1650 - total flux cleaned = -0.00253364 Jy ! Component: 1700 - total flux cleaned = -0.00257622 Jy ! Component: 1750 - total flux cleaned = -0.00266013 Jy ! Component: 1800 - total flux cleaned = -0.00270137 Jy ! Component: 1850 - total flux cleaned = -0.00266026 Jy ! Component: 1900 - total flux cleaned = -0.0027144 Jy ! Component: 1950 - total flux cleaned = -0.00276781 Jy ! Component: 2000 - total flux cleaned = -0.00279413 Jy ! Component: 2050 - total flux cleaned = -0.00280705 Jy ! Component: 2100 - total flux cleaned = -0.00281986 Jy ! Component: 2150 - total flux cleaned = -0.0027942 Jy ! Component: 2200 - total flux cleaned = -0.00283227 Jy ! Component: 2250 - total flux cleaned = -0.00288262 Jy ! Component: 2300 - total flux cleaned = -0.00288259 Jy ! Component: 2350 - total flux cleaned = -0.0028826 Jy ! Component: 2400 - total flux cleaned = -0.0028946 Jy ! Component: 2450 - total flux cleaned = -0.00288249 Jy ! Component: 2500 - total flux cleaned = -0.00291834 Jy ! Component: 2550 - total flux cleaned = -0.00290655 Jy ! Component: 2600 - total flux cleaned = -0.0029183 Jy ! Component: 2650 - total flux cleaned = -0.00294164 Jy ! Component: 2700 - total flux cleaned = -0.00293016 Jy ! Component: 2750 - total flux cleaned = -0.00295313 Jy ! Component: 2800 - total flux cleaned = -0.0029646 Jy ! Component: 2850 - total flux cleaned = -0.00296478 Jy ! Component: 2900 - total flux cleaned = -0.00298721 Jy ! Component: 2950 - total flux cleaned = -0.00305387 Jy ! Component: 3000 - total flux cleaned = -0.00304278 Jy ! Component: 3050 - total flux cleaned = -0.00307564 Jy ! Component: 3100 - total flux cleaned = -0.00309732 Jy ! Component: 3150 - total flux cleaned = -0.00311889 Jy ! Component: 3200 - total flux cleaned = -0.00314041 Jy ! Component: 3250 - total flux cleaned = -0.0031509 Jy ! Component: 3300 - total flux cleaned = -0.00316138 Jy ! Component: 3350 - total flux cleaned = -0.00319265 Jy ! Component: 3400 - total flux cleaned = -0.00316173 Jy ! Component: 3450 - total flux cleaned = -0.00319258 Jy ! Component: 3500 - total flux cleaned = -0.00319256 Jy ! Component: 3550 - total flux cleaned = -0.00323313 Jy ! Component: 3600 - total flux cleaned = -0.00327358 Jy ! Component: 3650 - total flux cleaned = -0.00332365 Jy ! Component: 3700 - total flux cleaned = -0.00334358 Jy ! Component: 3750 - total flux cleaned = -0.00338311 Jy ! Component: 3800 - total flux cleaned = -0.00342247 Jy ! Component: 3850 - total flux cleaned = -0.00345174 Jy ! Component: 3900 - total flux cleaned = -0.00351975 Jy ! Component: 3950 - total flux cleaned = -0.003539 Jy ! Component: 4000 - total flux cleaned = -0.00358703 Jy ! Component: 4050 - total flux cleaned = -0.00360621 Jy ! Total flux subtracted in 4096 components = -0.0036727 Jy ! Clean residual min=-0.000631 max=0.000610 Jy/beam ! Clean residual mean=-0.000008 rms=0.000169 Jy/beam ! Combined flux in latest and established models = 0.0782867 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 361 components and 0.0782866 Jy ![Exited script file: muppet] wmap "J2045+7625_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.91 x 4.563 at 78.29 degrees (North through East) ! Clean map min=-0.0011645 max=0.074961 Jy/beam ! Writing clean map to FITS file: J2045+7625_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0749606 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167214 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.669207 0.669207 1.33841 2.67683 5.35365 10.7073 21.4146 42.8292 85.6585 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.91 x 4.563 at 78.29 degrees (North through East) ! Clean map min=-0.0011645 max=0.074961 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2045+7625_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:20:20 2019