! Started logfile: J2040-3836_S_2017_02_19_pus_uvs.log on Sat May 4 18:58:31 2019 obs J2040-3836_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2040-3836_S_2017_02_19_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.532759 visibilities/baseline/integration-bin. ! Found source: J2040-3836 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 11124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2040-3836_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 345 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 651 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.991352Jy sigma=0.005312 ! Fit after self-cal, rms=0.924546Jy sigma=0.004984 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.123 mas, bmaj=6.235 mas, bpa=-3.336 degrees ! Estimated noise=2212.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059662 Jy ! Component: 100 - total flux cleaned = 0.0756764 Jy ! Total flux subtracted in 100 components = 0.0756764 Jy ! Clean residual min=-0.007320 max=0.008539 Jy/beam ! Clean residual mean=0.000017 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.0756764 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0756764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132608Jy sigma=0.000641 ! Fit after self-cal, rms=0.131836Jy sigma=0.000637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.682 mas, bmaj=7.216 mas, bpa=-3.257 degrees ! Estimated noise=1421.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130968 Jy ! Component: 100 - total flux cleaned = 0.0197365 Jy ! Component: 150 - total flux cleaned = 0.0234784 Jy ! Component: 200 - total flux cleaned = 0.0257744 Jy ! Total flux subtracted in 200 components = 0.0257744 Jy ! Clean residual min=-0.004150 max=0.004973 Jy/beam ! Clean residual mean=-0.000004 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.101451 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 55 components and 0.101451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130420Jy sigma=0.000631 ! Fit after self-cal, rms=0.130102Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.00* KP 1.06 ! LA 0.94 MK 1.18 NL 0.97 OV 1.04 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.03 HN 1.00* KP 1.07 ! LA 1.03 MK 1.08 NL 0.87 OV 1.10 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.97 HN 1.00* KP 0.96 ! LA 0.81 MK 1.08 NL 1.00 OV 1.02 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.00* KP 1.00* ! LA 0.82 MK 0.98 NL 1.00* OV 0.84 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.130102Jy sigma=0.000629 ! Fit after self-cal, rms=0.126475Jy sigma=0.000627 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.335 mas, bpa=-3.164 degrees ! Estimated noise=1422.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (24.5, 42.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368833 Jy ! Component: 100 - total flux cleaned = 0.00478005 Jy ! Component: 150 - total flux cleaned = 0.00498946 Jy ! Component: 200 - total flux cleaned = 0.0050341 Jy ! Total flux subtracted in 200 components = 0.0050341 Jy ! Clean residual min=-0.002916 max=0.002774 Jy/beam ! Clean residual mean=-0.000007 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.106485 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.106485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126360Jy sigma=0.000626 ! Fit after self-cal, rms=0.126170Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126170Jy sigma=0.000625 ! Fit after self-cal, rms=0.125608Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.349 mas, bpa=-3.039 degrees ! Estimated noise=1425.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228577 Jy ! Component: 100 - total flux cleaned = 0.00272207 Jy ! Component: 150 - total flux cleaned = 0.00277097 Jy ! Component: 200 - total flux cleaned = 0.00273432 Jy ! Total flux subtracted in 200 components = 0.00273432 Jy ! Clean residual min=-0.002730 max=0.002742 Jy/beam ! Clean residual mean=-0.000005 rms=0.000676 Jy/beam ! Combined flux in latest and established models = 0.109219 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.109219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125550Jy sigma=0.000624 ! Fit after self-cal, rms=0.125459Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103651 Jy ! Component: 100 - total flux cleaned = 0.000936914 Jy ! Component: 150 - total flux cleaned = 0.000977413 Jy ! Component: 200 - total flux cleaned = 0.000941134 Jy ! Total flux subtracted in 200 components = 0.000941134 Jy ! Clean residual min=-0.002953 max=0.002494 Jy/beam ! Clean residual mean=-0.000005 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.11016 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 82 components and 0.11016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125421Jy sigma=0.000624 ! Fit after self-cal, rms=0.125408Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125408Jy sigma=0.000624 ! Fit after self-cal, rms=0.124640Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.322 mas, bpa=-3.149 degrees ! Estimated noise=1418.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000917677 Jy ! Component: 100 - total flux cleaned = 0.000915212 Jy ! Component: 150 - total flux cleaned = 0.000876227 Jy ! Component: 200 - total flux cleaned = 0.00077601 Jy ! Total flux subtracted in 200 components = 0.00077601 Jy ! Clean residual min=-0.002819 max=0.002564 Jy/beam ! Clean residual mean=-0.000004 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.110936 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 90 components and 0.110936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124608Jy sigma=0.000623 ! Fit after self-cal, rms=0.124613Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572668 Jy ! Component: 100 - total flux cleaned = 0.000532763 Jy ! Component: 150 - total flux cleaned = 0.000427089 Jy ! Component: 200 - total flux cleaned = 0.000331097 Jy ! Total flux subtracted in 200 components = 0.000331097 Jy ! Clean residual min=-0.002916 max=0.002431 Jy/beam ! Clean residual mean=-0.000004 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.111267 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.111267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124586Jy sigma=0.000623 ! Fit after self-cal, rms=0.124581Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124581Jy sigma=0.000623 ! Fit after self-cal, rms=0.123966Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.798 mas, bmaj=22.77 mas, bpa=2.284 degrees ! Estimated noise=1937.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.70614e-05 Jy ! Component: 100 - total flux cleaned = 6.89959e-05 Jy ! Component: 150 - total flux cleaned = 5.22276e-05 Jy ! Component: 200 - total flux cleaned = 3.64726e-05 Jy ! Total flux subtracted in 200 components = 3.64726e-05 Jy ! Clean residual min=-0.002215 max=0.003329 Jy/beam ! Clean residual mean=-0.000006 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.111304 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 106 components and 0.111304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123963Jy sigma=0.000623 ! Fit after self-cal, rms=0.123960Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.62681e-06 Jy ! Component: 100 - total flux cleaned = -7.50831e-05 Jy ! Component: 150 - total flux cleaned = -0.000105586 Jy ! Component: 200 - total flux cleaned = -0.000131291 Jy ! Total flux subtracted in 200 components = -0.000131291 Jy ! Clean residual min=-0.002192 max=0.003246 Jy/beam ! Clean residual mean=-0.000008 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.111173 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.111173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123960Jy sigma=0.000623 ! Fit after self-cal, rms=0.123962Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.304 mas, bpa=-3.331 degrees ! Estimated noise=1412.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.304 at -3.331 degrees (North through East) ! Clean map min=-0.0034585 max=0.078968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.179 mas, bmaj=6.263 mas, bpa=-3.409 degrees ! Estimated noise=2244.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0590002 Jy ! Component: 100 - total flux cleaned = 0.0769466 Jy ! Component: 150 - total flux cleaned = 0.0882942 Jy ! Component: 200 - total flux cleaned = 0.0964915 Jy ! Total flux subtracted in 200 components = 0.0964915 Jy ! Clean residual min=-0.006774 max=0.006177 Jy/beam ! Clean residual mean=0.000017 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.0964915 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0964915 Jy ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.304 mas, bpa=-3.331 degrees ! Estimated noise=1412.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791392 Jy ! Component: 100 - total flux cleaned = 0.0125993 Jy ! Component: 150 - total flux cleaned = 0.0140523 Jy ! Component: 200 - total flux cleaned = 0.0148601 Jy ! Total flux subtracted in 200 components = 0.0148601 Jy ! Clean residual min=-0.003740 max=0.002741 Jy/beam ! Clean residual mean=0.000002 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.111352 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.111352 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.798 mas, bmaj=22.77 mas, bpa=2.284 degrees ! Estimated noise=1937.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216369 Jy ! Component: 100 - total flux cleaned = 0.00206184 Jy ! Component: 150 - total flux cleaned = 0.00206348 Jy ! Component: 200 - total flux cleaned = 0.00206335 Jy ! Total flux subtracted in 200 components = 0.00206335 Jy ! Clean residual min=-0.002485 max=0.003029 Jy/beam ! Clean residual mean=-0.000012 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.113415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77014e-05 Jy ! Component: 100 - total flux cleaned = -0.000186973 Jy ! Component: 150 - total flux cleaned = -0.000268338 Jy ! Component: 200 - total flux cleaned = -0.000318695 Jy ! Total flux subtracted in 200 components = -0.000318695 Jy ! Clean residual min=-0.002357 max=0.003046 Jy/beam ! Clean residual mean=-0.000012 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.113096 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.113096 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=7.304 mas, bpa=-3.331 degrees ! Estimated noise=1412.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397302 Jy ! Component: 100 - total flux cleaned = -0.000584182 Jy ! Component: 150 - total flux cleaned = -0.000635264 Jy ! Component: 200 - total flux cleaned = -0.000683262 Jy ! Total flux subtracted in 200 components = -0.000683262 Jy ! Clean residual min=-0.003326 max=0.002603 Jy/beam ! Clean residual mean=-0.000004 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.112413 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.112413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123969Jy sigma=0.000623 ! Fit after self-cal, rms=0.123934Jy sigma=0.000623 wmodel J2040-3836_S_2017_02_19_pus_map.mod ! Writing 81 model components to file: J2040-3836_S_2017_02_19_pus_map.mod wobs J2040-3836_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2040-3836_S_2017_02_19_pus_uvs.fits wwins J2040-3836_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J2040-3836_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122295 Jy ! Component: 100 - total flux cleaned = -0.00181655 Jy ! Component: 150 - total flux cleaned = -0.00211365 Jy ! Component: 200 - total flux cleaned = -0.00235463 Jy ! Component: 250 - total flux cleaned = -0.0024314 Jy ! Component: 300 - total flux cleaned = -0.0022476 Jy ! Component: 350 - total flux cleaned = -0.0021063 Jy ! Component: 400 - total flux cleaned = -0.00203846 Jy ! Component: 450 - total flux cleaned = -0.00200469 Jy ! Component: 500 - total flux cleaned = -0.00190773 Jy ! Component: 550 - total flux cleaned = -0.00175066 Jy ! Component: 600 - total flux cleaned = -0.00181153 Jy ! Component: 650 - total flux cleaned = -0.00178211 Jy ! Component: 700 - total flux cleaned = -0.00186992 Jy ! Component: 750 - total flux cleaned = -0.00186959 Jy ! Component: 800 - total flux cleaned = -0.00186961 Jy ! Component: 850 - total flux cleaned = -0.00189678 Jy ! Component: 900 - total flux cleaned = -0.00195026 Jy ! Component: 950 - total flux cleaned = -0.00195069 Jy ! Component: 1000 - total flux cleaned = -0.00202784 Jy ! Component: 1050 - total flux cleaned = -0.00202705 Jy ! Component: 1100 - total flux cleaned = -0.0020265 Jy ! Component: 1150 - total flux cleaned = -0.00195343 Jy ! Component: 1200 - total flux cleaned = -0.00183418 Jy ! Component: 1250 - total flux cleaned = -0.00185758 Jy ! Component: 1300 - total flux cleaned = -0.00176434 Jy ! Component: 1350 - total flux cleaned = -0.00169606 Jy ! Component: 1400 - total flux cleaned = -0.00158367 Jy ! Component: 1450 - total flux cleaned = -0.0015617 Jy ! Component: 1500 - total flux cleaned = -0.00145246 Jy ! Component: 1550 - total flux cleaned = -0.00145214 Jy ! Component: 1600 - total flux cleaned = -0.00132469 Jy ! Component: 1650 - total flux cleaned = -0.00130385 Jy ! Component: 1700 - total flux cleaned = -0.00124162 Jy ! Component: 1750 - total flux cleaned = -0.00118068 Jy ! Component: 1800 - total flux cleaned = -0.00118043 Jy ! Component: 1850 - total flux cleaned = -0.00122053 Jy ! Component: 1900 - total flux cleaned = -0.00116188 Jy ! Component: 1950 - total flux cleaned = -0.00110374 Jy ! Component: 2000 - total flux cleaned = -0.00110368 Jy ! Component: 2050 - total flux cleaned = -0.00108485 Jy ! Component: 2100 - total flux cleaned = -0.00114087 Jy ! Component: 2150 - total flux cleaned = -0.00112228 Jy ! Component: 2200 - total flux cleaned = -0.0011039 Jy ! Component: 2250 - total flux cleaned = -0.00106768 Jy ! Component: 2300 - total flux cleaned = -0.00108569 Jy ! Component: 2350 - total flux cleaned = -0.00108587 Jy ! Component: 2400 - total flux cleaned = -0.0010859 Jy ! Component: 2450 - total flux cleaned = -0.00108598 Jy ! Component: 2500 - total flux cleaned = -0.00113743 Jy ! Component: 2550 - total flux cleaned = -0.00112051 Jy ! Component: 2600 - total flux cleaned = -0.00112073 Jy ! Component: 2650 - total flux cleaned = -0.00108775 Jy ! Component: 2700 - total flux cleaned = -0.00108793 Jy ! Component: 2750 - total flux cleaned = -0.00108788 Jy ! Component: 2800 - total flux cleaned = -0.00108786 Jy ! Component: 2850 - total flux cleaned = -0.00103985 Jy ! Component: 2900 - total flux cleaned = -0.0010241 Jy ! Component: 2950 - total flux cleaned = -0.00100845 Jy ! Component: 3000 - total flux cleaned = -0.00102396 Jy ! Component: 3050 - total flux cleaned = -0.00100835 Jy ! Component: 3100 - total flux cleaned = -0.00099298 Jy ! Component: 3150 - total flux cleaned = -0.000992913 Jy ! Component: 3200 - total flux cleaned = -0.000977669 Jy ! Component: 3250 - total flux cleaned = -0.000947814 Jy ! Component: 3300 - total flux cleaned = -0.00091824 Jy ! Component: 3350 - total flux cleaned = -0.000859416 Jy ! Component: 3400 - total flux cleaned = -0.000801183 Jy ! Component: 3450 - total flux cleaned = -0.000772359 Jy ! Component: 3500 - total flux cleaned = -0.000729359 Jy ! Component: 3550 - total flux cleaned = -0.00068669 Jy ! Component: 3600 - total flux cleaned = -0.000644282 Jy ! Component: 3650 - total flux cleaned = -0.000630264 Jy ! Component: 3700 - total flux cleaned = -0.000560506 Jy ! Component: 3750 - total flux cleaned = -0.000532888 Jy ! Component: 3800 - total flux cleaned = -0.00047781 Jy ! Component: 3850 - total flux cleaned = -0.000423088 Jy ! Component: 3900 - total flux cleaned = -0.000382211 Jy ! Component: 3950 - total flux cleaned = -0.000314597 Jy ! Component: 4000 - total flux cleaned = -0.000234013 Jy ! Component: 4050 - total flux cleaned = -0.000220527 Jy ! Total flux subtracted in 4096 components = -0.000167202 Jy ! Clean residual min=-0.000818 max=0.000989 Jy/beam ! Clean residual mean=-0.000001 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.112246 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 327 components and 0.112246 Jy ![Exited script file: muppet] wmap "J2040-3836_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.304 at -3.331 degrees (North through East) ! Clean map min=-0.0019093 max=0.075661 Jy/beam ! Writing clean map to FITS file: J2040-3836_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0756614 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216612 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.858874 0.858874 1.71775 3.4355 6.87099 13.742 27.484 54.9679 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.759 x 7.304 at -3.331 degrees (North through East) ! Clean map min=-0.0019093 max=0.075661 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2040-3836_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:58:35 2019