! Started logfile: J2036-2830_S_2017_03_23_pus_uvs.log on Mon May 13 10:08:34 2019 obs J2036-2830_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2036-2830_S_2017_03_23_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.876023 visibilities/baseline/integration-bin. ! Found source: J2036-2830 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 11984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2036-2830_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914910Jy sigma=0.005828 ! Fit after self-cal, rms=0.876666Jy sigma=0.005590 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.785 mas, bpa=-9.403 degrees ! Estimated noise=1681.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100077 Jy ! Component: 100 - total flux cleaned = 0.122181 Jy ! Total flux subtracted in 100 components = 0.122181 Jy ! Clean residual min=-0.006162 max=0.007434 Jy/beam ! Clean residual mean=-0.000045 rms=0.001644 Jy/beam ! Combined flux in latest and established models = 0.122181 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.122181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122336Jy sigma=0.000680 ! Fit after self-cal, rms=0.122319Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=7.979 mas, bpa=-7.742 degrees ! Estimated noise=1117.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101759 Jy ! Component: 100 - total flux cleaned = 0.0153097 Jy ! Component: 150 - total flux cleaned = 0.0181212 Jy ! Component: 200 - total flux cleaned = 0.0196758 Jy ! Total flux subtracted in 200 components = 0.0196758 Jy ! Clean residual min=-0.005341 max=0.004609 Jy/beam ! Clean residual mean=-0.000035 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.141856 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.141856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121439Jy sigma=0.000675 ! Fit after self-cal, rms=0.121474Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.05 KP 1.01 ! LA 0.93 MK 0.99 NL 0.84 OV 0.99 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 1.14 KP 0.99 ! LA 0.97 MK 0.97 NL 1.04 OV 1.03 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.08 KP 0.91 ! LA 0.78 MK 0.99 NL 1.09 OV 0.97 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.08 HN 1.13 KP 1.00* ! LA 0.74 MK 1.14 NL 1.00* OV 1.34 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.121474Jy sigma=0.000675 ! Fit after self-cal, rms=0.120164Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=7.968 mas, bpa=-7.304 degrees ! Estimated noise=1116.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629578 Jy ! Component: 100 - total flux cleaned = -0.000682631 Jy ! Component: 150 - total flux cleaned = -0.000785086 Jy ! Component: 200 - total flux cleaned = -0.000837905 Jy ! Total flux subtracted in 200 components = -0.000837905 Jy ! Clean residual min=-0.003254 max=0.003054 Jy/beam ! Clean residual mean=-0.000015 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.141018 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.141019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120144Jy sigma=0.000666 ! Fit after self-cal, rms=0.120217Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120217Jy sigma=0.000666 ! Fit after self-cal, rms=0.122971Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.986 mas, bpa=-7.32 degrees ! Estimated noise=1117.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234238 Jy ! Component: 100 - total flux cleaned = -0.000220515 Jy ! Component: 150 - total flux cleaned = -0.000220067 Jy ! Component: 200 - total flux cleaned = -0.000229853 Jy ! Total flux subtracted in 200 components = -0.000229853 Jy ! Clean residual min=-0.002995 max=0.002390 Jy/beam ! Clean residual mean=-0.000010 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.140789 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.140789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122966Jy sigma=0.000664 ! Fit after self-cal, rms=0.123013Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.08682e-05 Jy ! Component: 100 - total flux cleaned = -2.12118e-05 Jy ! Component: 150 - total flux cleaned = -3.00667e-05 Jy ! Component: 200 - total flux cleaned = -3.81515e-05 Jy ! Total flux subtracted in 200 components = -3.81515e-05 Jy ! Clean residual min=-0.002992 max=0.002438 Jy/beam ! Clean residual mean=-0.000010 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.14075 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.14075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123010Jy sigma=0.000664 ! Fit after self-cal, rms=0.123012Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123012Jy sigma=0.000664 ! Fit after self-cal, rms=0.124461Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.079 mas, bmaj=7.994 mas, bpa=-7.328 degrees ! Estimated noise=1117.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217662 Jy ! Component: 100 - total flux cleaned = -0.00026175 Jy ! Component: 150 - total flux cleaned = -0.000271204 Jy ! Component: 200 - total flux cleaned = -0.000279897 Jy ! Total flux subtracted in 200 components = -0.000279897 Jy ! Clean residual min=-0.002918 max=0.002434 Jy/beam ! Clean residual mean=-0.000007 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.140471 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.140471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124457Jy sigma=0.000664 ! Fit after self-cal, rms=0.124479Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38221e-06 Jy ! Component: 100 - total flux cleaned = 6.24476e-06 Jy ! Component: 150 - total flux cleaned = -1.63155e-06 Jy ! Component: 200 - total flux cleaned = -8.80058e-06 Jy ! Total flux subtracted in 200 components = -8.80058e-06 Jy ! Clean residual min=-0.002918 max=0.002425 Jy/beam ! Clean residual mean=-0.000008 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.140462 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.140462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124477Jy sigma=0.000664 ! Fit after self-cal, rms=0.124478Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124478Jy sigma=0.000664 ! Fit after self-cal, rms=0.124571Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=19.3 mas, bpa=-0.408 degrees ! Estimated noise=1388.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000453418 Jy ! Component: 100 - total flux cleaned = -0.000445537 Jy ! Component: 150 - total flux cleaned = -0.000431551 Jy ! Component: 200 - total flux cleaned = -0.000419316 Jy ! Total flux subtracted in 200 components = -0.000419316 Jy ! Clean residual min=-0.002901 max=0.002384 Jy/beam ! Clean residual mean=-0.000016 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.140042 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 50 components and 0.140042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124571Jy sigma=0.000664 ! Fit after self-cal, rms=0.124572Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.69924e-05 Jy ! Component: 100 - total flux cleaned = -2.90777e-05 Jy ! Component: 150 - total flux cleaned = -1.50625e-05 Jy ! Component: 200 - total flux cleaned = -2.80328e-06 Jy ! Total flux subtracted in 200 components = -2.80328e-06 Jy ! Clean residual min=-0.002897 max=0.002372 Jy/beam ! Clean residual mean=-0.000017 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.14004 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.14004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124573Jy sigma=0.000664 ! Fit after self-cal, rms=0.124572Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.001 mas, bpa=-7.324 degrees ! Estimated noise=1117.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 8.001 at -7.324 degrees (North through East) ! Clean map min=-0.0027256 max=0.1264 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=6.777 mas, bpa=-9.011 degrees ! Estimated noise=1687.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100099 Jy ! Component: 100 - total flux cleaned = 0.121978 Jy ! Component: 150 - total flux cleaned = 0.129282 Jy ! Component: 200 - total flux cleaned = 0.133492 Jy ! Total flux subtracted in 200 components = 0.133492 Jy ! Clean residual min=-0.004272 max=0.004296 Jy/beam ! Clean residual mean=-0.000014 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.133492 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.133492 Jy ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.001 mas, bpa=-7.324 degrees ! Estimated noise=1117.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362734 Jy ! Component: 100 - total flux cleaned = 0.00526373 Jy ! Component: 150 - total flux cleaned = 0.00588968 Jy ! Component: 200 - total flux cleaned = 0.00589017 Jy ! Total flux subtracted in 200 components = 0.00589017 Jy ! Clean residual min=-0.002989 max=0.002418 Jy/beam ! Clean residual mean=-0.000009 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.139382 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.139382 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=19.3 mas, bpa=-0.408 degrees ! Estimated noise=1388.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016165 Jy ! Component: 100 - total flux cleaned = 0.000175348 Jy ! Component: 150 - total flux cleaned = 0.000198425 Jy ! Component: 200 - total flux cleaned = 0.000218043 Jy ! Total flux subtracted in 200 components = 0.000218043 Jy ! Clean residual min=-0.002872 max=0.002438 Jy/beam ! Clean residual mean=-0.000017 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.1396 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.12184e-06 Jy ! Component: 100 - total flux cleaned = 1.77119e-05 Jy ! Component: 150 - total flux cleaned = 2.59171e-05 Jy ! Component: 200 - total flux cleaned = 3.38556e-05 Jy ! Total flux subtracted in 200 components = 3.38556e-05 Jy ! Clean residual min=-0.002890 max=0.002445 Jy/beam ! Clean residual mean=-0.000017 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.139634 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.139634 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.001 mas, bpa=-7.324 degrees ! Estimated noise=1117.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.30041e-05 Jy ! Component: 100 - total flux cleaned = 5.54588e-06 Jy ! Component: 150 - total flux cleaned = 6.49932e-06 Jy ! Component: 200 - total flux cleaned = 2.17218e-05 Jy ! Total flux subtracted in 200 components = 2.17218e-05 Jy ! Clean residual min=-0.002953 max=0.002439 Jy/beam ! Clean residual mean=-0.000009 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.139656 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.139656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124584Jy sigma=0.000664 ! Fit after self-cal, rms=0.124574Jy sigma=0.000664 wmodel J2036-2830_S_2017_03_23_pus_map.mod ! Writing 40 model components to file: J2036-2830_S_2017_03_23_pus_map.mod wobs J2036-2830_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2036-2830_S_2017_03_23_pus_uvs.fits wwins J2036-2830_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2036-2830_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010777 Jy ! Component: 100 - total flux cleaned = -0.00168319 Jy ! Component: 150 - total flux cleaned = -0.00190419 Jy ! Component: 200 - total flux cleaned = -0.00215876 Jy ! Component: 250 - total flux cleaned = -0.00244507 Jy ! Component: 300 - total flux cleaned = -0.00276097 Jy ! Component: 350 - total flux cleaned = -0.00306861 Jy ! Component: 400 - total flux cleaned = -0.00321861 Jy ! Component: 450 - total flux cleaned = -0.00340097 Jy ! Component: 500 - total flux cleaned = -0.00347175 Jy ! Component: 550 - total flux cleaned = -0.00361105 Jy ! Component: 600 - total flux cleaned = -0.00378148 Jy ! Component: 650 - total flux cleaned = -0.00391459 Jy ! Component: 700 - total flux cleaned = -0.0038485 Jy ! Component: 750 - total flux cleaned = -0.00391357 Jy ! Component: 800 - total flux cleaned = -0.00394529 Jy ! Component: 850 - total flux cleaned = -0.00400724 Jy ! Component: 900 - total flux cleaned = -0.0039147 Jy ! Component: 950 - total flux cleaned = -0.00403599 Jy ! Component: 1000 - total flux cleaned = -0.00403537 Jy ! Component: 1050 - total flux cleaned = -0.00403504 Jy ! Component: 1100 - total flux cleaned = -0.00397689 Jy ! Component: 1150 - total flux cleaned = -0.00397708 Jy ! Component: 1200 - total flux cleaned = -0.0039775 Jy ! Component: 1250 - total flux cleaned = -0.00400564 Jy ! Component: 1300 - total flux cleaned = -0.00403346 Jy ! Component: 1350 - total flux cleaned = -0.00406059 Jy ! Component: 1400 - total flux cleaned = -0.0041144 Jy ! Component: 1450 - total flux cleaned = -0.00400832 Jy ! Component: 1500 - total flux cleaned = -0.00406081 Jy ! Component: 1550 - total flux cleaned = -0.00411265 Jy ! Component: 1600 - total flux cleaned = -0.00408687 Jy ! Component: 1650 - total flux cleaned = -0.00411222 Jy ! Component: 1700 - total flux cleaned = -0.00411169 Jy ! Component: 1750 - total flux cleaned = -0.00408718 Jy ! Component: 1800 - total flux cleaned = -0.00408694 Jy ! Component: 1850 - total flux cleaned = -0.00411134 Jy ! Component: 1900 - total flux cleaned = -0.00401577 Jy ! Component: 1950 - total flux cleaned = -0.00406329 Jy ! Component: 2000 - total flux cleaned = -0.00408681 Jy ! Component: 2050 - total flux cleaned = -0.00401681 Jy ! Component: 2100 - total flux cleaned = -0.00392468 Jy ! Component: 2150 - total flux cleaned = -0.00387926 Jy ! Component: 2200 - total flux cleaned = -0.00390192 Jy ! Component: 2250 - total flux cleaned = -0.00385694 Jy ! Component: 2300 - total flux cleaned = -0.00376796 Jy ! Component: 2350 - total flux cleaned = -0.00376832 Jy ! Component: 2400 - total flux cleaned = -0.00372502 Jy ! Component: 2450 - total flux cleaned = -0.0037681 Jy ! Component: 2500 - total flux cleaned = -0.00376832 Jy ! Component: 2550 - total flux cleaned = -0.00372592 Jy ! Component: 2600 - total flux cleaned = -0.00366301 Jy ! Component: 2650 - total flux cleaned = -0.00368411 Jy ! Component: 2700 - total flux cleaned = -0.00368407 Jy ! Component: 2750 - total flux cleaned = -0.00368386 Jy ! Component: 2800 - total flux cleaned = -0.00368387 Jy ! Component: 2850 - total flux cleaned = -0.00368363 Jy ! Component: 2900 - total flux cleaned = -0.00358335 Jy ! Component: 2950 - total flux cleaned = -0.00366272 Jy ! Component: 3000 - total flux cleaned = -0.00370196 Jy ! Component: 3050 - total flux cleaned = -0.00366267 Jy ! Component: 3100 - total flux cleaned = -0.00354608 Jy ! Component: 3150 - total flux cleaned = -0.00352717 Jy ! Component: 3200 - total flux cleaned = -0.00352708 Jy ! Component: 3250 - total flux cleaned = -0.00345097 Jy ! Component: 3300 - total flux cleaned = -0.00347009 Jy ! Component: 3350 - total flux cleaned = -0.00333889 Jy ! Component: 3400 - total flux cleaned = -0.00339488 Jy ! Component: 3450 - total flux cleaned = -0.00333949 Jy ! Component: 3500 - total flux cleaned = -0.0033577 Jy ! Component: 3550 - total flux cleaned = -0.00330302 Jy ! Component: 3600 - total flux cleaned = -0.00330293 Jy ! Component: 3650 - total flux cleaned = -0.00323092 Jy ! Component: 3700 - total flux cleaned = -0.00317721 Jy ! Component: 3750 - total flux cleaned = -0.00317696 Jy ! Component: 3800 - total flux cleaned = -0.00315925 Jy ! Component: 3850 - total flux cleaned = -0.0031592 Jy ! Component: 3900 - total flux cleaned = -0.00310686 Jy ! Component: 3950 - total flux cleaned = -0.00310693 Jy ! Component: 4000 - total flux cleaned = -0.00312428 Jy ! Component: 4050 - total flux cleaned = -0.00312443 Jy ! Total flux subtracted in 4096 components = -0.00312433 Jy ! Clean residual min=-0.000990 max=0.000992 Jy/beam ! Clean residual mean=-0.000005 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 0.136531 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 325 components and 0.136531 Jy ![Exited script file: muppet] wmap "J2036-2830_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 8.001 at -7.324 degrees (North through East) ! Clean map min=-0.0022075 max=0.1274 Jy/beam ! Writing clean map to FITS file: J2036-2830_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127404 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301184 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.709202 0.709202 1.4184 2.83681 5.67362 11.3472 22.6945 45.389 90.7779 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 8.001 at -7.324 degrees (North through East) ! Clean map min=-0.0022075 max=0.1274 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2036-2830_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:08:39 2019