! Started logfile: J2032-2125_S_2017_03_23_pus_uvs.log on Mon May 13 10:08:25 2019 obs J2032-2125_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2032-2125_S_2017_03_23_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835673 visibilities/baseline/integration-bin. ! Found source: J2032-2125 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 11432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2032-2125_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943457Jy sigma=0.006464 ! Fit after self-cal, rms=0.916785Jy sigma=0.006304 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=7.006 mas, bpa=-7.301 degrees ! Estimated noise=1535.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664147 Jy ! Component: 100 - total flux cleaned = 0.0819048 Jy ! Total flux subtracted in 100 components = 0.0819048 Jy ! Clean residual min=-0.005215 max=0.006542 Jy/beam ! Clean residual mean=-0.000039 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.0819048 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0819048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108737Jy sigma=0.000681 ! Fit after self-cal, rms=0.108694Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=8.11 mas, bpa=-4.672 degrees ! Estimated noise=1066.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0088302 Jy ! Component: 100 - total flux cleaned = 0.013129 Jy ! Component: 150 - total flux cleaned = 0.015376 Jy ! Component: 200 - total flux cleaned = 0.0165665 Jy ! Total flux subtracted in 200 components = 0.0165665 Jy ! Clean residual min=-0.003901 max=0.003290 Jy/beam ! Clean residual mean=-0.000031 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0984712 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.0984712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107895Jy sigma=0.000677 ! Fit after self-cal, rms=0.107908Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.98 KP 1.10 ! LA 1.09 MK 1.00 NL 0.80 OV 1.01 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.05 HN 1.05 KP 0.93 ! LA 1.01 MK 1.02 NL 1.03 OV 1.11 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00 HN 0.98 KP 0.85 ! LA 0.78 MK 1.05 NL 1.14 OV 0.95 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.05 HN 0.91 KP 1.00* ! LA 0.81 MK 1.11 NL 1.00* OV 1.27 ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.107908Jy sigma=0.000677 ! Fit after self-cal, rms=0.103952Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.162 mas, bpa=-4.38 degrees ! Estimated noise=1067.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196433 Jy ! Component: 100 - total flux cleaned = 0.000175552 Jy ! Component: 150 - total flux cleaned = 0.000193953 Jy ! Component: 200 - total flux cleaned = 0.00020949 Jy ! Total flux subtracted in 200 components = 0.00020949 Jy ! Clean residual min=-0.003013 max=0.003306 Jy/beam ! Clean residual mean=-0.000022 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0986807 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0986807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103941Jy sigma=0.000672 ! Fit after self-cal, rms=0.103897Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103897Jy sigma=0.000672 ! Fit after self-cal, rms=0.104048Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=8.145 mas, bpa=-4.274 degrees ! Estimated noise=1069.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299671 Jy ! Component: 100 - total flux cleaned = 0.000384936 Jy ! Component: 150 - total flux cleaned = 0.000384789 Jy ! Component: 200 - total flux cleaned = 0.000384548 Jy ! Total flux subtracted in 200 components = 0.000384548 Jy ! Clean residual min=-0.003002 max=0.003024 Jy/beam ! Clean residual mean=-0.000016 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0990652 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.0990652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104043Jy sigma=0.000671 ! Fit after self-cal, rms=0.104060Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.74682e-05 Jy ! Component: 100 - total flux cleaned = 5.27428e-05 Jy ! Component: 150 - total flux cleaned = 5.23931e-05 Jy ! Component: 200 - total flux cleaned = 5.18239e-05 Jy ! Total flux subtracted in 200 components = 5.18239e-05 Jy ! Clean residual min=-0.002993 max=0.003038 Jy/beam ! Clean residual mean=-0.000017 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0991171 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.099117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104057Jy sigma=0.000671 ! Fit after self-cal, rms=0.104057Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104057Jy sigma=0.000671 ! Fit after self-cal, rms=0.104207Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.128 mas, bpa=-4.241 degrees ! Estimated noise=1069.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132745 Jy ! Component: 100 - total flux cleaned = 0.000146294 Jy ! Component: 150 - total flux cleaned = 0.000146215 Jy ! Component: 200 - total flux cleaned = 0.000146714 Jy ! Total flux subtracted in 200 components = 0.000146714 Jy ! Clean residual min=-0.002978 max=0.002991 Jy/beam ! Clean residual mean=-0.000014 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0992638 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0992638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104205Jy sigma=0.000671 ! Fit after self-cal, rms=0.104214Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.77633e-07 Jy ! Component: 100 - total flux cleaned = -1.14354e-05 Jy ! Component: 150 - total flux cleaned = -2.06224e-05 Jy ! Component: 200 - total flux cleaned = -2.07113e-05 Jy ! Total flux subtracted in 200 components = -2.07113e-05 Jy ! Clean residual min=-0.002987 max=0.002995 Jy/beam ! Clean residual mean=-0.000014 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.099243 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.099243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104212Jy sigma=0.000671 ! Fit after self-cal, rms=0.104213Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104213Jy sigma=0.000671 ! Fit after self-cal, rms=0.104250Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.578 mas, bmaj=16.91 mas, bpa=0.683 degrees ! Estimated noise=1362.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266461 Jy ! Component: 100 - total flux cleaned = 0.000224098 Jy ! Component: 150 - total flux cleaned = 0.00019343 Jy ! Component: 200 - total flux cleaned = 0.000169583 Jy ! Total flux subtracted in 200 components = 0.000169583 Jy ! Clean residual min=-0.003413 max=0.003923 Jy/beam ! Clean residual mean=-0.000030 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0994126 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.0994126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104256Jy sigma=0.000671 ! Fit after self-cal, rms=0.104251Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.4508e-05 Jy ! Component: 100 - total flux cleaned = -5.10732e-05 Jy ! Component: 150 - total flux cleaned = -7.97131e-05 Jy ! Component: 200 - total flux cleaned = -0.000101107 Jy ! Total flux subtracted in 200 components = -0.000101107 Jy ! Clean residual min=-0.003425 max=0.003927 Jy/beam ! Clean residual mean=-0.000030 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0993115 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 60 components and 0.0993115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104258Jy sigma=0.000671 ! Fit after self-cal, rms=0.104252Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.125 mas, bpa=-4.216 degrees ! Estimated noise=1069.56 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.125 at -4.216 degrees (North through East) ! Clean map min=-0.0028808 max=0.084618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=6.999 mas, bpa=-6.936 degrees ! Estimated noise=1550.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669597 Jy ! Component: 100 - total flux cleaned = 0.0827689 Jy ! Component: 150 - total flux cleaned = 0.0898997 Jy ! Component: 200 - total flux cleaned = 0.0939518 Jy ! Total flux subtracted in 200 components = 0.0939518 Jy ! Clean residual min=-0.004713 max=0.004275 Jy/beam ! Clean residual mean=-0.000020 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.0939518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0939518 Jy ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.125 mas, bpa=-4.216 degrees ! Estimated noise=1069.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330021 Jy ! Component: 100 - total flux cleaned = 0.00482708 Jy ! Component: 150 - total flux cleaned = 0.00517721 Jy ! Component: 200 - total flux cleaned = 0.00532113 Jy ! Total flux subtracted in 200 components = 0.00532113 Jy ! Clean residual min=-0.003026 max=0.002985 Jy/beam ! Clean residual mean=-0.000014 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.0992729 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.0992729 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.578 mas, bmaj=16.91 mas, bpa=0.683 degrees ! Estimated noise=1362.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312946 Jy ! Component: 100 - total flux cleaned = 0.000268993 Jy ! Component: 150 - total flux cleaned = 0.000236062 Jy ! Component: 200 - total flux cleaned = 0.000193701 Jy ! Total flux subtracted in 200 components = 0.000193701 Jy ! Clean residual min=-0.003425 max=0.003973 Jy/beam ! Clean residual mean=-0.000030 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.0994666 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.47984e-05 Jy ! Component: 100 - total flux cleaned = -6.33142e-05 Jy ! Component: 150 - total flux cleaned = -8.68232e-05 Jy ! Component: 200 - total flux cleaned = -0.000106297 Jy ! Total flux subtracted in 200 components = -0.000106297 Jy ! Clean residual min=-0.003430 max=0.003966 Jy/beam ! Clean residual mean=-0.000030 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0993603 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0993604 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.125 mas, bpa=-4.216 degrees ! Estimated noise=1069.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135858 Jy ! Component: 100 - total flux cleaned = -0.000116146 Jy ! Component: 150 - total flux cleaned = -3.42498e-05 Jy ! Component: 200 - total flux cleaned = 6.19698e-06 Jy ! Total flux subtracted in 200 components = 6.19698e-06 Jy ! Clean residual min=-0.003055 max=0.002987 Jy/beam ! Clean residual mean=-0.000014 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0993666 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 60 components and 0.0993666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104255Jy sigma=0.000671 ! Fit after self-cal, rms=0.104253Jy sigma=0.000671 wmodel J2032-2125_S_2017_03_23_pus_map.mod ! Writing 60 model components to file: J2032-2125_S_2017_03_23_pus_map.mod wobs J2032-2125_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2032-2125_S_2017_03_23_pus_uvs.fits wwins J2032-2125_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2032-2125_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000839429 Jy ! Component: 100 - total flux cleaned = -0.00151239 Jy ! Component: 150 - total flux cleaned = -0.00175129 Jy ! Component: 200 - total flux cleaned = -0.00216345 Jy ! Component: 250 - total flux cleaned = -0.00233834 Jy ! Component: 300 - total flux cleaned = -0.00254828 Jy ! Component: 350 - total flux cleaned = -0.00266997 Jy ! Component: 400 - total flux cleaned = -0.00271034 Jy ! Component: 450 - total flux cleaned = -0.00290319 Jy ! Component: 500 - total flux cleaned = -0.00305409 Jy ! Component: 550 - total flux cleaned = -0.00320094 Jy ! Component: 600 - total flux cleaned = -0.00334327 Jy ! Component: 650 - total flux cleaned = -0.00337849 Jy ! Component: 700 - total flux cleaned = -0.00341288 Jy ! Component: 750 - total flux cleaned = -0.00357859 Jy ! Component: 800 - total flux cleaned = -0.00361021 Jy ! Component: 850 - total flux cleaned = -0.00361055 Jy ! Component: 900 - total flux cleaned = -0.00373683 Jy ! Component: 950 - total flux cleaned = -0.00373676 Jy ! Component: 1000 - total flux cleaned = -0.0037972 Jy ! Component: 1050 - total flux cleaned = -0.00385705 Jy ! Component: 1100 - total flux cleaned = -0.00388652 Jy ! Component: 1150 - total flux cleaned = -0.00397356 Jy ! Component: 1200 - total flux cleaned = -0.00403104 Jy ! Component: 1250 - total flux cleaned = -0.00405968 Jy ! Component: 1300 - total flux cleaned = -0.00417047 Jy ! Component: 1350 - total flux cleaned = -0.00419763 Jy ! Component: 1400 - total flux cleaned = -0.00425178 Jy ! Component: 1450 - total flux cleaned = -0.00427833 Jy ! Component: 1500 - total flux cleaned = -0.0043831 Jy ! Component: 1550 - total flux cleaned = -0.0043828 Jy ! Component: 1600 - total flux cleaned = -0.00440815 Jy ! Component: 1650 - total flux cleaned = -0.00435749 Jy ! Component: 1700 - total flux cleaned = -0.00438259 Jy ! Component: 1750 - total flux cleaned = -0.00440727 Jy ! Component: 1800 - total flux cleaned = -0.00448017 Jy ! Component: 1850 - total flux cleaned = -0.00448019 Jy ! Component: 1900 - total flux cleaned = -0.00450384 Jy ! Component: 1950 - total flux cleaned = -0.00443362 Jy ! Component: 2000 - total flux cleaned = -0.00450408 Jy ! Component: 2050 - total flux cleaned = -0.00464272 Jy ! Component: 2100 - total flux cleaned = -0.00464275 Jy ! Component: 2150 - total flux cleaned = -0.00473283 Jy ! Component: 2200 - total flux cleaned = -0.00477719 Jy ! Component: 2250 - total flux cleaned = -0.00482121 Jy ! Component: 2300 - total flux cleaned = -0.0048652 Jy ! Component: 2350 - total flux cleaned = -0.00490875 Jy ! Component: 2400 - total flux cleaned = -0.00497307 Jy ! Component: 2450 - total flux cleaned = -0.00493066 Jy ! Component: 2500 - total flux cleaned = -0.00499388 Jy ! Component: 2550 - total flux cleaned = -0.00497285 Jy ! Component: 2600 - total flux cleaned = -0.00505563 Jy ! Component: 2650 - total flux cleaned = -0.00503472 Jy ! Component: 2700 - total flux cleaned = -0.00505491 Jy ! Component: 2750 - total flux cleaned = -0.00513543 Jy ! Component: 2800 - total flux cleaned = -0.00509517 Jy ! Component: 2850 - total flux cleaned = -0.00513491 Jy ! Component: 2900 - total flux cleaned = -0.00521356 Jy ! Component: 2950 - total flux cleaned = -0.00523273 Jy ! Component: 3000 - total flux cleaned = -0.00521342 Jy ! Component: 3050 - total flux cleaned = -0.00525167 Jy ! Component: 3100 - total flux cleaned = -0.00530834 Jy ! Component: 3150 - total flux cleaned = -0.00527054 Jy ! Component: 3200 - total flux cleaned = -0.00538286 Jy ! Component: 3250 - total flux cleaned = -0.00534537 Jy ! Component: 3300 - total flux cleaned = -0.00534533 Jy ! Component: 3350 - total flux cleaned = -0.00536395 Jy ! Component: 3400 - total flux cleaned = -0.00541843 Jy ! Component: 3450 - total flux cleaned = -0.00536422 Jy ! Component: 3500 - total flux cleaned = -0.00536422 Jy ! Component: 3550 - total flux cleaned = -0.00536423 Jy ! Component: 3600 - total flux cleaned = -0.00534659 Jy ! Component: 3650 - total flux cleaned = -0.00539914 Jy ! Component: 3700 - total flux cleaned = -0.00541642 Jy ! Component: 3750 - total flux cleaned = -0.00538197 Jy ! Component: 3800 - total flux cleaned = -0.00538195 Jy ! Component: 3850 - total flux cleaned = -0.00539914 Jy ! Component: 3900 - total flux cleaned = -0.0053824 Jy ! Component: 3950 - total flux cleaned = -0.00534906 Jy ! Component: 4000 - total flux cleaned = -0.00529925 Jy ! Component: 4050 - total flux cleaned = -0.00534889 Jy ! Total flux subtracted in 4096 components = -0.00538164 Jy ! Clean residual min=-0.000948 max=0.001015 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0939849 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 350 components and 0.0939849 Jy ![Exited script file: muppet] wmap "J2032-2125_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.125 at -4.216 degrees (North through East) ! Clean map min=-0.0025305 max=0.084459 Jy/beam ! Writing clean map to FITS file: J2032-2125_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0844591 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293812 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04362 1.04362 2.08725 4.1745 8.34899 16.698 33.396 66.7919 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.125 at -4.216 degrees (North through East) ! Clean map min=-0.0025305 max=0.084459 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2032-2125_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:08:30 2019