! Started logfile: J2030-3039_S_2017_01_21_pus_uvs.log on Sun May 5 16:02:37 2019 obs J2030-3039_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2030-3039_S_2017_01_21_pus_uva.fits ! AN table 1: 70 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.531746 visibilities/baseline/integration-bin. ! Found source: J2030-3039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 5360 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2030-3039_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976507Jy sigma=0.004421 ! Fit after self-cal, rms=0.901757Jy sigma=0.004164 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.88 mas, bpa=-15.99 degrees ! Estimated noise=4794.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0804188 Jy ! Component: 100 - total flux cleaned = 0.10716 Jy ! Total flux subtracted in 100 components = 0.10716 Jy ! Clean residual min=-0.012387 max=0.016219 Jy/beam ! Clean residual mean=-0.000006 rms=0.004117 Jy/beam ! Combined flux in latest and established models = 0.10716 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.10716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169998Jy sigma=0.000663 ! Fit after self-cal, rms=0.169444Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.749 mas, bmaj=7.239 mas, bpa=-12.81 degrees ! Estimated noise=2315.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219455 Jy ! Component: 100 - total flux cleaned = 0.0338545 Jy ! Component: 150 - total flux cleaned = 0.0407905 Jy ! Component: 200 - total flux cleaned = 0.0448955 Jy ! Total flux subtracted in 200 components = 0.0448955 Jy ! Clean residual min=-0.006834 max=0.008940 Jy/beam ! Clean residual mean=-0.000007 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.152055 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.152055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166936Jy sigma=0.000645 ! Fit after self-cal, rms=0.166599Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.05 LA 1.02 ! MK 1.15 NL 0.91 OV 1.14 PT 1.09 ! SC 1.02 ! ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.11 LA 0.98 ! MK 0.99 NL 0.98 OV 1.33 PT 0.97 ! SC 1.09 ! ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.07 LA 0.90 ! MK 1.20 NL 0.93 OV 0.96 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.02 LA 0.97 ! MK 0.75 NL 1.00* OV 0.93 PT 0.98 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.166599Jy sigma=0.000643 ! Fit after self-cal, rms=0.175753Jy sigma=0.000643 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=7.355 mas, bpa=-13.62 degrees ! Estimated noise=2377.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29, 55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00462175 Jy ! Component: 100 - total flux cleaned = 0.00485145 Jy ! Component: 150 - total flux cleaned = 0.00517853 Jy ! Component: 200 - total flux cleaned = 0.00517261 Jy ! Total flux subtracted in 200 components = 0.00517261 Jy ! Clean residual min=-0.005877 max=0.005740 Jy/beam ! Clean residual mean=-0.000001 rms=0.001398 Jy/beam ! Combined flux in latest and established models = 0.157228 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.157228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175389Jy sigma=0.000641 ! Fit after self-cal, rms=0.175317Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175317Jy sigma=0.000641 ! Fit after self-cal, rms=0.173322Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=7.319 mas, bpa=-13.97 degrees ! Estimated noise=2349.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018543 Jy ! Component: 100 - total flux cleaned = 0.00178268 Jy ! Component: 150 - total flux cleaned = 0.00171895 Jy ! Component: 200 - total flux cleaned = 0.00167291 Jy ! Total flux subtracted in 200 components = 0.00167291 Jy ! Clean residual min=-0.005464 max=0.005424 Jy/beam ! Clean residual mean=-0.000000 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.158901 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.158901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173192Jy sigma=0.000640 ! Fit after self-cal, rms=0.173021Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28, -55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274945 Jy ! Component: 100 - total flux cleaned = 0.00224884 Jy ! Component: 150 - total flux cleaned = 0.00180058 Jy ! Component: 200 - total flux cleaned = 0.00157614 Jy ! Total flux subtracted in 200 components = 0.00157614 Jy ! Clean residual min=-0.004837 max=0.004379 Jy/beam ! Clean residual mean=0.000000 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.160477 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.160477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172780Jy sigma=0.000639 ! Fit after self-cal, rms=0.172501Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172501Jy sigma=0.000639 ! Fit after self-cal, rms=0.169793Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=7.286 mas, bpa=-14.35 degrees ! Estimated noise=2310.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541294 Jy ! Component: 100 - total flux cleaned = 0.000245182 Jy ! Component: 150 - total flux cleaned = 6.94894e-07 Jy ! Component: 200 - total flux cleaned = -0.00013994 Jy ! Total flux subtracted in 200 components = -0.00013994 Jy ! Clean residual min=-0.004628 max=0.004385 Jy/beam ! Clean residual mean=-0.000000 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.160337 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.160337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169637Jy sigma=0.000638 ! Fit after self-cal, rms=0.169460Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440472 Jy ! Component: 100 - total flux cleaned = 0.000350864 Jy ! Component: 150 - total flux cleaned = 0.000118717 Jy ! Component: 200 - total flux cleaned = -8.77748e-05 Jy ! Total flux subtracted in 200 components = -8.77748e-05 Jy ! Clean residual min=-0.004863 max=0.004285 Jy/beam ! Clean residual mean=-0.000001 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.160249 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.160249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169340Jy sigma=0.000638 ! Fit after self-cal, rms=0.169187Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169187Jy sigma=0.000637 ! Fit after self-cal, rms=0.166989Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=16.51 mas, bpa=-3.896 degrees ! Estimated noise=3272.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127203 Jy ! Component: 100 - total flux cleaned = 0.000242721 Jy ! Component: 150 - total flux cleaned = 0.000343005 Jy ! Component: 200 - total flux cleaned = 0.000390871 Jy ! Total flux subtracted in 200 components = 0.000390871 Jy ! Clean residual min=-0.003617 max=0.004421 Jy/beam ! Clean residual mean=0.000001 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.16064 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 0.16064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166949Jy sigma=0.000637 ! Fit after self-cal, rms=0.166881Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237554 Jy ! Component: 100 - total flux cleaned = 0.000192301 Jy ! Component: 150 - total flux cleaned = 0.000151832 Jy ! Component: 200 - total flux cleaned = 0.000152065 Jy ! Total flux subtracted in 200 components = 0.000152065 Jy ! Clean residual min=-0.003563 max=0.004299 Jy/beam ! Clean residual mean=0.000001 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.160792 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.160792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166852Jy sigma=0.000637 ! Fit after self-cal, rms=0.166819Jy sigma=0.000637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.271 mas, bpa=-14.69 degrees ! Estimated noise=2276.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.7 x 7.271 at -14.69 degrees (North through East) ! Clean map min=-0.0062595 max=0.10696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=6.905 mas, bpa=-17.5 degrees ! Estimated noise=4515.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731451 Jy ! Component: 100 - total flux cleaned = 0.105519 Jy ! Component: 150 - total flux cleaned = 0.124914 Jy ! Component: 200 - total flux cleaned = 0.135108 Jy ! Total flux subtracted in 200 components = 0.135108 Jy ! Clean residual min=-0.010876 max=0.011068 Jy/beam ! Clean residual mean=-0.000003 rms=0.002860 Jy/beam ! Combined flux in latest and established models = 0.135108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.135108 Jy ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.271 mas, bpa=-14.69 degrees ! Estimated noise=2276.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012681 Jy ! Component: 100 - total flux cleaned = 0.0172069 Jy ! Component: 150 - total flux cleaned = 0.0203603 Jy ! Component: 200 - total flux cleaned = 0.0215298 Jy ! Total flux subtracted in 200 components = 0.0215298 Jy ! Clean residual min=-0.005955 max=0.005157 Jy/beam ! Clean residual mean=-0.000000 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.156638 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.156638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=16.51 mas, bpa=-3.896 degrees ! Estimated noise=3272.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417376 Jy ! Component: 100 - total flux cleaned = 0.00383881 Jy ! Component: 150 - total flux cleaned = 0.00384767 Jy ! Component: 200 - total flux cleaned = 0.00385063 Jy ! Total flux subtracted in 200 components = 0.00385063 Jy ! Clean residual min=-0.003851 max=0.004811 Jy/beam ! Clean residual mean=0.000002 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.160489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000191708 Jy ! Component: 100 - total flux cleaned = -0.000414446 Jy ! Component: 150 - total flux cleaned = -0.000512315 Jy ! Component: 200 - total flux cleaned = -0.000557889 Jy ! Total flux subtracted in 200 components = -0.000557889 Jy ! Clean residual min=-0.003540 max=0.004235 Jy/beam ! Clean residual mean=0.000002 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.159931 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.159931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.271 mas, bpa=-14.69 degrees ! Estimated noise=2276.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000819602 Jy ! Component: 100 - total flux cleaned = 0.000977944 Jy ! Component: 150 - total flux cleaned = 0.000983304 Jy ! Component: 200 - total flux cleaned = 0.00088716 Jy ! Total flux subtracted in 200 components = 0.00088716 Jy ! Clean residual min=-0.004960 max=0.004781 Jy/beam ! Clean residual mean=0.000001 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.160818 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 108 components and 0.160818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166923Jy sigma=0.000637 ! Fit after self-cal, rms=0.167008Jy sigma=0.000637 wmodel J2030-3039_S_2017_01_21_pus_map.mod ! Writing 108 model components to file: J2030-3039_S_2017_01_21_pus_map.mod wobs J2030-3039_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2030-3039_S_2017_01_21_pus_uvs.fits wwins J2030-3039_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J2030-3039_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270911 Jy ! Component: 100 - total flux cleaned = 0.000944193 Jy ! Component: 150 - total flux cleaned = 0.00143106 Jy ! Component: 200 - total flux cleaned = 0.00175651 Jy ! Component: 250 - total flux cleaned = 0.00212661 Jy ! Component: 300 - total flux cleaned = 0.00248139 Jy ! Component: 350 - total flux cleaned = 0.00287964 Jy ! Component: 400 - total flux cleaned = 0.00310072 Jy ! Component: 450 - total flux cleaned = 0.00336778 Jy ! Component: 500 - total flux cleaned = 0.00357365 Jy ! Component: 550 - total flux cleaned = 0.00357278 Jy ! Component: 600 - total flux cleaned = 0.00357352 Jy ! Component: 650 - total flux cleaned = 0.00352616 Jy ! Component: 700 - total flux cleaned = 0.00352621 Jy ! Component: 750 - total flux cleaned = 0.00348109 Jy ! Component: 800 - total flux cleaned = 0.00357032 Jy ! Component: 850 - total flux cleaned = 0.00365762 Jy ! Component: 900 - total flux cleaned = 0.00365669 Jy ! Component: 950 - total flux cleaned = 0.00357281 Jy ! Component: 1000 - total flux cleaned = 0.00361356 Jy ! Component: 1050 - total flux cleaned = 0.00361311 Jy ! Component: 1100 - total flux cleaned = 0.00361335 Jy ! Component: 1150 - total flux cleaned = 0.00377105 Jy ! Component: 1200 - total flux cleaned = 0.00392629 Jy ! Component: 1250 - total flux cleaned = 0.00408 Jy ! Component: 1300 - total flux cleaned = 0.00419393 Jy ! Component: 1350 - total flux cleaned = 0.00426891 Jy ! Component: 1400 - total flux cleaned = 0.00434337 Jy ! Component: 1450 - total flux cleaned = 0.00441728 Jy ! Component: 1500 - total flux cleaned = 0.00449008 Jy ! Component: 1550 - total flux cleaned = 0.00449008 Jy ! Component: 1600 - total flux cleaned = 0.00448968 Jy ! Component: 1650 - total flux cleaned = 0.00448975 Jy ! Component: 1700 - total flux cleaned = 0.00445433 Jy ! Component: 1750 - total flux cleaned = 0.00456182 Jy ! Component: 1800 - total flux cleaned = 0.00456186 Jy ! Component: 1850 - total flux cleaned = 0.00463366 Jy ! Component: 1900 - total flux cleaned = 0.00467033 Jy ! Component: 1950 - total flux cleaned = 0.00474273 Jy ! Component: 2000 - total flux cleaned = 0.00477962 Jy ! Component: 2050 - total flux cleaned = 0.00477965 Jy ! Component: 2100 - total flux cleaned = 0.00477993 Jy ! Component: 2150 - total flux cleaned = 0.0048176 Jy ! Component: 2200 - total flux cleaned = 0.00477914 Jy ! Component: 2250 - total flux cleaned = 0.0047016 Jy ! Component: 2300 - total flux cleaned = 0.00462231 Jy ! Component: 2350 - total flux cleaned = 0.0045005 Jy ! Component: 2400 - total flux cleaned = 0.00441812 Jy ! Component: 2450 - total flux cleaned = 0.00433403 Jy ! Component: 2500 - total flux cleaned = 0.00420564 Jy ! Component: 2550 - total flux cleaned = 0.00411856 Jy ! Component: 2600 - total flux cleaned = 0.00398433 Jy ! Component: 2650 - total flux cleaned = 0.00384745 Jy ! Component: 2700 - total flux cleaned = 0.00370648 Jy ! Component: 2750 - total flux cleaned = 0.00361076 Jy ! Component: 2800 - total flux cleaned = 0.0034635 Jy ! Component: 2850 - total flux cleaned = 0.00331248 Jy ! Component: 2900 - total flux cleaned = 0.00320904 Jy ! Component: 2950 - total flux cleaned = 0.00305104 Jy ! Component: 3000 - total flux cleaned = 0.00294254 Jy ! Component: 3050 - total flux cleaned = 0.00277658 Jy ! Component: 3100 - total flux cleaned = 0.00260481 Jy ! Component: 3150 - total flux cleaned = 0.00248801 Jy ! Component: 3200 - total flux cleaned = 0.0023684 Jy ! Component: 3250 - total flux cleaned = 0.00218424 Jy ! Component: 3300 - total flux cleaned = 0.0020578 Jy ! Component: 3350 - total flux cleaned = 0.00186305 Jy ! Component: 3400 - total flux cleaned = 0.0017284 Jy ! Component: 3450 - total flux cleaned = 0.00159151 Jy ! Component: 3500 - total flux cleaned = 0.00137984 Jy ! Component: 3550 - total flux cleaned = 0.00123481 Jy ! Component: 3600 - total flux cleaned = 0.00116075 Jy ! Component: 3650 - total flux cleaned = 0.0009325 Jy ! Component: 3700 - total flux cleaned = 0.000775605 Jy ! Component: 3750 - total flux cleaned = 0.000615017 Jy ! Component: 3800 - total flux cleaned = 0.0004496 Jy ! Component: 3850 - total flux cleaned = 0.000364961 Jy ! Component: 3900 - total flux cleaned = 0.000277935 Jy ! Component: 3950 - total flux cleaned = 9.94799e-05 Jy ! Component: 4000 - total flux cleaned = 7.68782e-06 Jy ! Component: 4050 - total flux cleaned = -0.000182182 Jy ! Total flux subtracted in 4096 components = -0.000277951 Jy ! Clean residual min=-0.005360 max=0.005763 Jy/beam ! Clean residual mean=0.000004 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.16054 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 328 components and 0.16054 Jy ![Exited script file: muppet] wmap "J2030-3039_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.7 x 7.271 at -14.69 degrees (North through East) ! Clean map min=-0.0070183 max=0.10083 Jy/beam ! Writing clean map to FITS file: J2030-3039_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100826 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00134898 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.0138 4.0138 8.0276 16.0552 32.1104 64.2208 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.7 x 7.271 at -14.69 degrees (North through East) ! Clean map min=-0.0070183 max=0.10083 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2030-3039_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:02:42 2019