! Started logfile: J2030-3039_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:14 2019 obs J2030-3039_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2030-3039_S_2017_01_16_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.779181 visibilities/baseline/integration-bin. ! Found source: J2030-3039 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 13324 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2030-3039_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958061Jy sigma=0.005147 ! Fit after self-cal, rms=0.903060Jy sigma=0.004889 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=14.25 mas, bpa=8.982 degrees ! Estimated noise=2073.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832768 Jy ! Component: 100 - total flux cleaned = 0.108949 Jy ! Total flux subtracted in 100 components = 0.108949 Jy ! Clean residual min=-0.007852 max=0.012644 Jy/beam ! Clean residual mean=0.000008 rms=0.002625 Jy/beam ! Combined flux in latest and established models = 0.108949 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.108949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151839Jy sigma=0.000684 ! Fit after self-cal, rms=0.151683Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=15.93 mas, bpa=8.402 degrees ! Estimated noise=1196.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168854 Jy ! Component: 100 - total flux cleaned = 0.0243751 Jy ! Component: 150 - total flux cleaned = 0.0277581 Jy ! Component: 200 - total flux cleaned = 0.0282186 Jy ! Total flux subtracted in 200 components = 0.0282186 Jy ! Clean residual min=-0.006343 max=0.008011 Jy/beam ! Clean residual mean=0.000022 rms=0.002200 Jy/beam ! Combined flux in latest and established models = 0.137168 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.137168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150425Jy sigma=0.000669 ! Fit after self-cal, rms=0.150356Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.32 KP 0.95 ! LA 0.89 MK 1.00* NL 0.87 OV 0.95 ! PT 1.67 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.89 HN 1.20 KP 0.93 ! LA 0.88 MK 1.00* NL 0.94 OV 0.94 ! PT 1.77 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 1.08 KP 0.91 ! LA 0.94 MK 1.00* NL 0.92 OV 0.95 ! PT 1.55 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 0.99 KP 0.84 ! LA 0.94 MK 1.00* NL 1.00* OV 0.92 ! PT 1.62 SC 0.83 ! ! ! Fit before self-cal, rms=0.150356Jy sigma=0.000668 ! Fit after self-cal, rms=0.176128Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=16.01 mas, bpa=8.688 degrees ! Estimated noise=1195.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216979 Jy ! Component: 100 - total flux cleaned = 0.00225018 Jy ! Component: 150 - total flux cleaned = 0.0021909 Jy ! Component: 200 - total flux cleaned = 0.00213776 Jy ! Total flux subtracted in 200 components = 0.00213776 Jy ! Clean residual min=-0.003693 max=0.003600 Jy/beam ! Clean residual mean=0.000011 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.139306 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.139306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176084Jy sigma=0.000656 ! Fit after self-cal, rms=0.177169Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177169Jy sigma=0.000655 ! Fit after self-cal, rms=0.183885Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.795 mas, bmaj=15.97 mas, bpa=8.821 degrees ! Estimated noise=1203.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204412 Jy ! Component: 100 - total flux cleaned = 0.00215326 Jy ! Component: 150 - total flux cleaned = 0.0020687 Jy ! Component: 200 - total flux cleaned = 0.00199706 Jy ! Total flux subtracted in 200 components = 0.00199706 Jy ! Clean residual min=-0.003736 max=0.003489 Jy/beam ! Clean residual mean=0.000011 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.141303 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.141303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183856Jy sigma=0.000654 ! Fit after self-cal, rms=0.183953Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.26962e-05 Jy ! Component: 100 - total flux cleaned = -1.86958e-05 Jy ! Component: 150 - total flux cleaned = -4.95584e-05 Jy ! Component: 200 - total flux cleaned = -0.000105753 Jy ! Total flux subtracted in 200 components = -0.000105753 Jy ! Clean residual min=-0.003665 max=0.003455 Jy/beam ! Clean residual mean=0.000010 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.141197 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.141197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183945Jy sigma=0.000654 ! Fit after self-cal, rms=0.183952Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183952Jy sigma=0.000654 ! Fit after self-cal, rms=0.188821Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.782 mas, bmaj=15.89 mas, bpa=8.756 degrees ! Estimated noise=1203.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109885 Jy ! Component: 100 - total flux cleaned = 0.00110145 Jy ! Component: 150 - total flux cleaned = 0.00107683 Jy ! Component: 200 - total flux cleaned = 0.00105538 Jy ! Total flux subtracted in 200 components = 0.00105538 Jy ! Clean residual min=-0.003287 max=0.003250 Jy/beam ! Clean residual mean=0.000001 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.142253 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 0.142253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188808Jy sigma=0.000653 ! Fit after self-cal, rms=0.188893Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170608 Jy ! Component: 100 - total flux cleaned = 0.000151721 Jy ! Component: 150 - total flux cleaned = 0.000134765 Jy ! Component: 200 - total flux cleaned = 0.000118887 Jy ! Total flux subtracted in 200 components = 0.000118887 Jy ! Clean residual min=-0.003268 max=0.003151 Jy/beam ! Clean residual mean=0.000002 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.142371 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 0.142371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188889Jy sigma=0.000653 ! Fit after self-cal, rms=0.188891Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188891Jy sigma=0.000653 ! Fit after self-cal, rms=0.190421Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=22.26 mas, bpa=-0.5199 degrees ! Estimated noise=1454.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112802 Jy ! Component: 100 - total flux cleaned = 0.00122289 Jy ! Component: 150 - total flux cleaned = 0.00124218 Jy ! Component: 200 - total flux cleaned = 0.00125957 Jy ! Total flux subtracted in 200 components = 0.00125957 Jy ! Clean residual min=-0.003621 max=0.003126 Jy/beam ! Clean residual mean=0.000000 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.143631 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.143631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190423Jy sigma=0.000653 ! Fit after self-cal, rms=0.190453Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.8431e-05 Jy ! Component: 100 - total flux cleaned = 9.29895e-05 Jy ! Component: 150 - total flux cleaned = 9.32303e-05 Jy ! Component: 200 - total flux cleaned = 9.44867e-05 Jy ! Total flux subtracted in 200 components = 9.44867e-05 Jy ! Clean residual min=-0.003622 max=0.003085 Jy/beam ! Clean residual mean=0.000000 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.143725 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.143725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190453Jy sigma=0.000653 ! Fit after self-cal, rms=0.190458Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=15.85 mas, bpa=8.793 degrees ! Estimated noise=1205.31 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.772 x 15.85 at 8.793 degrees (North through East) ! Clean map min=-0.0032453 max=0.11283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=14.29 mas, bpa=9.4 degrees ! Estimated noise=2039.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0796049 Jy ! Component: 100 - total flux cleaned = 0.10813 Jy ! Component: 150 - total flux cleaned = 0.124329 Jy ! Component: 200 - total flux cleaned = 0.133888 Jy ! Total flux subtracted in 200 components = 0.133888 Jy ! Clean residual min=-0.005803 max=0.005786 Jy/beam ! Clean residual mean=-0.000001 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.133888 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.133888 Jy ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=15.85 mas, bpa=8.793 degrees ! Estimated noise=1205.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648635 Jy ! Component: 100 - total flux cleaned = 0.00872211 Jy ! Component: 150 - total flux cleaned = 0.00948859 Jy ! Component: 200 - total flux cleaned = 0.00963793 Jy ! Total flux subtracted in 200 components = 0.00963793 Jy ! Clean residual min=-0.003472 max=0.003273 Jy/beam ! Clean residual mean=0.000003 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.143526 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.143526 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.999 mas, bmaj=22.26 mas, bpa=-0.5199 degrees ! Estimated noise=1454.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00091922 Jy ! Component: 100 - total flux cleaned = 0.00118632 Jy ! Component: 150 - total flux cleaned = 0.00114617 Jy ! Component: 200 - total flux cleaned = 0.00114355 Jy ! Total flux subtracted in 200 components = 0.00114355 Jy ! Clean residual min=-0.003757 max=0.002936 Jy/beam ! Clean residual mean=0.000005 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.144669 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32558e-05 Jy ! Component: 100 - total flux cleaned = -9.194e-05 Jy ! Component: 150 - total flux cleaned = -0.000118197 Jy ! Component: 200 - total flux cleaned = -0.00016747 Jy ! Total flux subtracted in 200 components = -0.00016747 Jy ! Clean residual min=-0.003781 max=0.002888 Jy/beam ! Clean residual mean=0.000006 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.144502 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 67 components and 0.144502 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.772 mas, bmaj=15.85 mas, bpa=8.793 degrees ! Estimated noise=1205.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000796993 Jy ! Component: 100 - total flux cleaned = -0.000987949 Jy ! Component: 150 - total flux cleaned = -0.00119475 Jy ! Component: 200 - total flux cleaned = -0.00134186 Jy ! Total flux subtracted in 200 components = -0.00134186 Jy ! Clean residual min=-0.003142 max=0.002835 Jy/beam ! Clean residual mean=0.000004 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.14316 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.14316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190421Jy sigma=0.000652 ! Fit after self-cal, rms=0.190409Jy sigma=0.000652 wmodel J2030-3039_S_2017_01_16_pus_map.mod ! Writing 92 model components to file: J2030-3039_S_2017_01_16_pus_map.mod wobs J2030-3039_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2030-3039_S_2017_01_16_pus_uvs.fits wwins J2030-3039_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2030-3039_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000764149 Jy ! Component: 100 - total flux cleaned = -0.000766254 Jy ! Component: 150 - total flux cleaned = -0.000814276 Jy ! Component: 200 - total flux cleaned = -0.00072033 Jy ! Component: 250 - total flux cleaned = -0.00076448 Jy ! Component: 300 - total flux cleaned = -0.000808206 Jy ! Component: 350 - total flux cleaned = -0.000767921 Jy ! Component: 400 - total flux cleaned = -0.00076839 Jy ! Component: 450 - total flux cleaned = -0.000691103 Jy ! Component: 500 - total flux cleaned = -0.000729788 Jy ! Component: 550 - total flux cleaned = -0.000579251 Jy ! Component: 600 - total flux cleaned = -0.000543534 Jy ! Component: 650 - total flux cleaned = -0.000544293 Jy ! Component: 700 - total flux cleaned = -0.000579724 Jy ! Component: 750 - total flux cleaned = -0.000578775 Jy ! Component: 800 - total flux cleaned = -0.00047717 Jy ! Component: 850 - total flux cleaned = -0.000543225 Jy ! Component: 900 - total flux cleaned = -0.00060737 Jy ! Component: 950 - total flux cleaned = -0.00051196 Jy ! Component: 1000 - total flux cleaned = -0.000543413 Jy ! Component: 1050 - total flux cleaned = -0.000419822 Jy ! Component: 1100 - total flux cleaned = -0.000298827 Jy ! Component: 1150 - total flux cleaned = -0.000358867 Jy ! Component: 1200 - total flux cleaned = -0.00032915 Jy ! Component: 1250 - total flux cleaned = -0.000329214 Jy ! Component: 1300 - total flux cleaned = -0.000357643 Jy ! Component: 1350 - total flux cleaned = -0.000385653 Jy ! Component: 1400 - total flux cleaned = -0.000385293 Jy ! Component: 1450 - total flux cleaned = -0.000412611 Jy ! Component: 1500 - total flux cleaned = -0.00043955 Jy ! Component: 1550 - total flux cleaned = -0.000439683 Jy ! Component: 1600 - total flux cleaned = -0.000598625 Jy ! Component: 1650 - total flux cleaned = -0.000650749 Jy ! Component: 1700 - total flux cleaned = -0.000753914 Jy ! Component: 1750 - total flux cleaned = -0.000856027 Jy ! Component: 1800 - total flux cleaned = -0.000855862 Jy ! Component: 1850 - total flux cleaned = -0.00095611 Jy ! Component: 1900 - total flux cleaned = -0.00105505 Jy ! Component: 1950 - total flux cleaned = -0.00107945 Jy ! Component: 2000 - total flux cleaned = -0.00120102 Jy ! Component: 2050 - total flux cleaned = -0.00127303 Jy ! Component: 2100 - total flux cleaned = -0.00139171 Jy ! Component: 2150 - total flux cleaned = -0.00143908 Jy ! Component: 2200 - total flux cleaned = -0.00157888 Jy ! Component: 2250 - total flux cleaned = -0.00160225 Jy ! Component: 2300 - total flux cleaned = -0.00169412 Jy ! Component: 2350 - total flux cleaned = -0.0016946 Jy ! Component: 2400 - total flux cleaned = -0.00173949 Jy ! Component: 2450 - total flux cleaned = -0.00178422 Jy ! Component: 2500 - total flux cleaned = -0.00180574 Jy ! Component: 2550 - total flux cleaned = -0.00180552 Jy ! Component: 2600 - total flux cleaned = -0.00180517 Jy ! Component: 2650 - total flux cleaned = -0.00178377 Jy ! Component: 2700 - total flux cleaned = -0.00178356 Jy ! Component: 2750 - total flux cleaned = -0.00178332 Jy ! Component: 2800 - total flux cleaned = -0.00182526 Jy ! Component: 2850 - total flux cleaned = -0.00176278 Jy ! Component: 2900 - total flux cleaned = -0.00178327 Jy ! Component: 2950 - total flux cleaned = -0.0017625 Jy ! Component: 3000 - total flux cleaned = -0.00176263 Jy ! Component: 3050 - total flux cleaned = -0.00174241 Jy ! Component: 3100 - total flux cleaned = -0.00176212 Jy ! Component: 3150 - total flux cleaned = -0.00174239 Jy ! Component: 3200 - total flux cleaned = -0.00166365 Jy ! Component: 3250 - total flux cleaned = -0.001742 Jy ! Component: 3300 - total flux cleaned = -0.00172267 Jy ! Component: 3350 - total flux cleaned = -0.00168411 Jy ! Component: 3400 - total flux cleaned = -0.0017605 Jy ! Component: 3450 - total flux cleaned = -0.00172248 Jy ! Component: 3500 - total flux cleaned = -0.00176029 Jy ! Component: 3550 - total flux cleaned = -0.00172287 Jy ! Component: 3600 - total flux cleaned = -0.00170437 Jy ! Component: 3650 - total flux cleaned = -0.0017784 Jy ! Component: 3700 - total flux cleaned = -0.00166811 Jy ! Component: 3750 - total flux cleaned = -0.00174097 Jy ! Component: 3800 - total flux cleaned = -0.00165017 Jy ! Component: 3850 - total flux cleaned = -0.0016503 Jy ! Component: 3900 - total flux cleaned = -0.00163264 Jy ! Component: 3950 - total flux cleaned = -0.00157909 Jy ! Component: 4000 - total flux cleaned = -0.00157913 Jy ! Component: 4050 - total flux cleaned = -0.00154388 Jy ! Total flux subtracted in 4096 components = -0.00150872 Jy ! Clean residual min=-0.001007 max=0.000922 Jy/beam ! Clean residual mean=0.000002 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.141651 Jy keep ! Adding 322 model components to the UV plane model. ! The established model now contains 414 components and 0.141651 Jy ![Exited script file: muppet] wmap "J2030-3039_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.772 x 15.85 at 8.793 degrees (North through East) ! Clean map min=-0.0034732 max=0.1104 Jy/beam ! Writing clean map to FITS file: J2030-3039_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.1104 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000348417 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.946782 0.946782 1.89356 3.78713 7.57425 15.1485 30.297 60.594 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.772 x 15.85 at 8.793 degrees (North through East) ! Clean map min=-0.0034732 max=0.1104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2030-3039_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:19 2019