! Started logfile: J2030-2506_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:02 2019 obs J2030-2506_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2030-2506_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.421613 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2030-2506 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8864 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2030-2506_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 465 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 548 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 730 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1074 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992224Jy sigma=0.007524 ! Fit after self-cal, rms=0.939011Jy sigma=0.007128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=36.74 mas, bpa=-14.21 degrees ! Estimated noise=2474.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464216 Jy ! Component: 100 - total flux cleaned = 0.0574911 Jy ! Total flux subtracted in 100 components = 0.0574911 Jy ! Clean residual min=-0.006530 max=0.008263 Jy/beam ! Clean residual mean=-0.000004 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.0574911 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0574911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086523Jy sigma=0.000620 ! Fit after self-cal, rms=0.085466Jy sigma=0.000611 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=38.03 mas, bpa=-14.51 degrees ! Estimated noise=1312.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00851163 Jy ! Component: 100 - total flux cleaned = 0.0118954 Jy ! Component: 150 - total flux cleaned = 0.014044 Jy ! Component: 200 - total flux cleaned = 0.0146379 Jy ! Total flux subtracted in 200 components = 0.0146379 Jy ! Clean residual min=-0.003761 max=0.003850 Jy/beam ! Clean residual mean=0.000006 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.072129 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 54 components and 0.072129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084581Jy sigma=0.000606 ! Fit after self-cal, rms=0.084506Jy sigma=0.000605 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 1.03 KP 0.98 ! LA 1.05 MK 1.21 NL 0.98 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 0.95 ! LA 0.95 MK 1.06 NL 1.01 OV 1.00* ! PT 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 0.88 ! LA 0.80 MK 1.13 NL 1.13 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.084506Jy sigma=0.000605 ! Fit after self-cal, rms=0.083033Jy sigma=0.000604 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.616 mas, bmaj=38.47 mas, bpa=-14.67 degrees ! Estimated noise=1355.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136464 Jy ! Component: 100 - total flux cleaned = -0.00153425 Jy ! Component: 150 - total flux cleaned = -0.00167575 Jy ! Component: 200 - total flux cleaned = -0.00179444 Jy ! Total flux subtracted in 200 components = -0.00179444 Jy ! Clean residual min=-0.002743 max=0.002584 Jy/beam ! Clean residual mean=0.000004 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0703346 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.0703346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082990Jy sigma=0.000604 ! Fit after self-cal, rms=0.082826Jy sigma=0.000603 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082826Jy sigma=0.000603 ! Fit after self-cal, rms=0.083199Jy sigma=0.000602 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.676 mas, bmaj=38.64 mas, bpa=-14.69 degrees ! Estimated noise=1353.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.91838e-05 Jy ! Component: 100 - total flux cleaned = 6.0814e-05 Jy ! Component: 150 - total flux cleaned = 9.43883e-05 Jy ! Component: 200 - total flux cleaned = 0.000125017 Jy ! Total flux subtracted in 200 components = 0.000125017 Jy ! Clean residual min=-0.002456 max=0.002497 Jy/beam ! Clean residual mean=0.000009 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0704596 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 94 components and 0.0704596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083169Jy sigma=0.000602 ! Fit after self-cal, rms=0.083188Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145653 Jy ! Component: 100 - total flux cleaned = -0.000183079 Jy ! Component: 150 - total flux cleaned = -0.000124327 Jy ! Component: 200 - total flux cleaned = -9.8305e-05 Jy ! Total flux subtracted in 200 components = -9.8305e-05 Jy ! Clean residual min=-0.002456 max=0.002422 Jy/beam ! Clean residual mean=0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0703613 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 0.0703613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083164Jy sigma=0.000601 ! Fit after self-cal, rms=0.083141Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083141Jy sigma=0.000601 ! Fit after self-cal, rms=0.083561Jy sigma=0.000601 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.692 mas, bmaj=38.7 mas, bpa=-14.69 degrees ! Estimated noise=1355.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182194 Jy ! Component: 100 - total flux cleaned = 0.000273114 Jy ! Component: 150 - total flux cleaned = 0.000298894 Jy ! Component: 200 - total flux cleaned = 0.00027393 Jy ! Total flux subtracted in 200 components = 0.00027393 Jy ! Clean residual min=-0.002343 max=0.002290 Jy/beam ! Clean residual mean=0.000006 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0706352 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.0706352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083542Jy sigma=0.000601 ! Fit after self-cal, rms=0.083570Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.6864e-05 Jy ! Component: 100 - total flux cleaned = 2.75972e-05 Jy ! Component: 150 - total flux cleaned = 5.11486e-05 Jy ! Component: 200 - total flux cleaned = 2.88187e-05 Jy ! Total flux subtracted in 200 components = 2.88187e-05 Jy ! Clean residual min=-0.002385 max=0.002297 Jy/beam ! Clean residual mean=0.000006 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.070664 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 0.070664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083555Jy sigma=0.000601 ! Fit after self-cal, rms=0.083547Jy sigma=0.000601 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083547Jy sigma=0.000601 ! Fit after self-cal, rms=0.083836Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.7 mas, bmaj=37.23 mas, bpa=-14.94 degrees ! Estimated noise=1467.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210255 Jy ! Component: 100 - total flux cleaned = -0.000287364 Jy ! Component: 150 - total flux cleaned = -0.000287943 Jy ! Component: 200 - total flux cleaned = -0.00030389 Jy ! Total flux subtracted in 200 components = -0.00030389 Jy ! Clean residual min=-0.002683 max=0.002123 Jy/beam ! Clean residual mean=0.000004 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0703602 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 138 components and 0.0703601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083830Jy sigma=0.000600 ! Fit after self-cal, rms=0.083833Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.48534e-05 Jy ! Component: 100 - total flux cleaned = -0.000119702 Jy ! Component: 150 - total flux cleaned = -0.000119655 Jy ! Component: 200 - total flux cleaned = -0.00010601 Jy ! Total flux subtracted in 200 components = -0.00010601 Jy ! Clean residual min=-0.002752 max=0.002051 Jy/beam ! Clean residual mean=0.000005 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0702541 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 139 components and 0.0702541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083828Jy sigma=0.000600 ! Fit after self-cal, rms=0.083820Jy sigma=0.000600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.699 mas, bmaj=38.72 mas, bpa=-14.69 degrees ! Estimated noise=1357.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.699 x 38.72 at -14.69 degrees (North through East) ! Clean map min=-0.0026591 max=0.062769 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=36.8 mas, bpa=-14.43 degrees ! Estimated noise=2721.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.048213 Jy ! Component: 100 - total flux cleaned = 0.0590359 Jy ! Component: 150 - total flux cleaned = 0.0612742 Jy ! Component: 200 - total flux cleaned = 0.0630005 Jy ! Total flux subtracted in 200 components = 0.0630005 Jy ! Clean residual min=-0.005942 max=0.005223 Jy/beam ! Clean residual mean=-0.000004 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.0630005 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0630005 Jy ! Inverting map and beam ! Estimated beam: bmin=4.699 mas, bmaj=38.72 mas, bpa=-14.69 degrees ! Estimated noise=1357.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429558 Jy ! Component: 100 - total flux cleaned = 0.00569169 Jy ! Component: 150 - total flux cleaned = 0.0067043 Jy ! Component: 200 - total flux cleaned = 0.00728841 Jy ! Total flux subtracted in 200 components = 0.00728841 Jy ! Clean residual min=-0.002528 max=0.002388 Jy/beam ! Clean residual mean=0.000005 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0702889 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 69 components and 0.0702889 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.7 mas, bmaj=37.23 mas, bpa=-14.94 degrees ! Estimated noise=1467.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.36873e-05 Jy ! Component: 100 - total flux cleaned = -0.000127118 Jy ! Component: 150 - total flux cleaned = -0.000152657 Jy ! Component: 200 - total flux cleaned = -0.000152566 Jy ! Total flux subtracted in 200 components = -0.000152566 Jy ! Clean residual min=-0.002872 max=0.001945 Jy/beam ! Clean residual mean=0.000004 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0701363 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10398e-07 Jy ! Component: 100 - total flux cleaned = 2.04252e-05 Jy ! Component: 150 - total flux cleaned = 3.86963e-05 Jy ! Component: 200 - total flux cleaned = 3.88162e-05 Jy ! Total flux subtracted in 200 components = 3.88162e-05 Jy ! Clean residual min=-0.002856 max=0.001955 Jy/beam ! Clean residual mean=0.000005 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0701751 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 121 components and 0.0701751 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.699 mas, bmaj=38.72 mas, bpa=-14.69 degrees ! Estimated noise=1357.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211959 Jy ! Component: 100 - total flux cleaned = -0.000181093 Jy ! Component: 150 - total flux cleaned = -0.000152273 Jy ! Component: 200 - total flux cleaned = -0.000152455 Jy ! Total flux subtracted in 200 components = -0.000152455 Jy ! Clean residual min=-0.002571 max=0.002236 Jy/beam ! Clean residual mean=0.000004 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0700227 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 137 components and 0.0700227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083827Jy sigma=0.000600 ! Fit after self-cal, rms=0.083824Jy sigma=0.000600 wmodel J2030-2506_S_2017_10_09_pus_map.mod ! Writing 137 model components to file: J2030-2506_S_2017_10_09_pus_map.mod wobs J2030-2506_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2030-2506_S_2017_10_09_pus_uvs.fits wwins J2030-2506_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2030-2506_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.96956e-05 Jy ! Component: 100 - total flux cleaned = 0.000385968 Jy ! Component: 150 - total flux cleaned = 0.000648954 Jy ! Component: 200 - total flux cleaned = 0.000711663 Jy ! Component: 250 - total flux cleaned = 0.000769974 Jy ! Component: 300 - total flux cleaned = 0.000906078 Jy ! Component: 350 - total flux cleaned = 0.0010103 Jy ! Component: 400 - total flux cleaned = 0.00113495 Jy ! Component: 450 - total flux cleaned = 0.00123089 Jy ! Component: 500 - total flux cleaned = 0.00130053 Jy ! Component: 550 - total flux cleaned = 0.00130091 Jy ! Component: 600 - total flux cleaned = 0.00134429 Jy ! Component: 650 - total flux cleaned = 0.00132334 Jy ! Component: 700 - total flux cleaned = 0.00126268 Jy ! Component: 750 - total flux cleaned = 0.00116443 Jy ! Component: 800 - total flux cleaned = 0.00108772 Jy ! Component: 850 - total flux cleaned = 0.00101273 Jy ! Component: 900 - total flux cleaned = 0.000902822 Jy ! Component: 950 - total flux cleaned = 0.000795478 Jy ! Component: 1000 - total flux cleaned = 0.000690245 Jy ! Component: 1050 - total flux cleaned = 0.000586799 Jy ! Component: 1100 - total flux cleaned = 0.000485383 Jy ! Component: 1150 - total flux cleaned = 0.000385858 Jy ! Component: 1200 - total flux cleaned = 0.000271789 Jy ! Component: 1250 - total flux cleaned = 0.000223421 Jy ! Component: 1300 - total flux cleaned = 0.000128015 Jy ! Component: 1350 - total flux cleaned = 1.80129e-05 Jy ! Component: 1400 - total flux cleaned = -5.97791e-05 Jy ! Component: 1450 - total flux cleaned = -0.000106115 Jy ! Component: 1500 - total flux cleaned = -0.000152225 Jy ! Component: 1550 - total flux cleaned = -0.000198016 Jy ! Component: 1600 - total flux cleaned = -0.000213151 Jy ! Component: 1650 - total flux cleaned = -0.000228363 Jy ! Component: 1700 - total flux cleaned = -0.000228323 Jy ! Component: 1750 - total flux cleaned = -0.000213155 Jy ! Component: 1800 - total flux cleaned = -0.000228255 Jy ! Component: 1850 - total flux cleaned = -0.000228123 Jy ! Component: 1900 - total flux cleaned = -0.000228014 Jy ! Component: 1950 - total flux cleaned = -0.00019767 Jy ! Component: 2000 - total flux cleaned = -0.000167304 Jy ! Component: 2050 - total flux cleaned = -0.000151925 Jy ! Component: 2100 - total flux cleaned = -0.000105975 Jy ! Component: 2150 - total flux cleaned = -9.05718e-05 Jy ! Component: 2200 - total flux cleaned = -5.97671e-05 Jy ! Component: 2250 - total flux cleaned = -2.85733e-05 Jy ! Component: 2300 - total flux cleaned = -1.28307e-05 Jy ! Component: 2350 - total flux cleaned = -1.29017e-05 Jy ! Component: 2400 - total flux cleaned = 1.89286e-05 Jy ! Component: 2450 - total flux cleaned = 3.51572e-05 Jy ! Component: 2500 - total flux cleaned = 6.75805e-05 Jy ! Component: 2550 - total flux cleaned = 0.00010035 Jy ! Component: 2600 - total flux cleaned = 0.000100466 Jy ! Component: 2650 - total flux cleaned = 0.000133639 Jy ! Component: 2700 - total flux cleaned = 0.000133699 Jy ! Component: 2750 - total flux cleaned = 0.00013361 Jy ! Component: 2800 - total flux cleaned = 0.000133574 Jy ! Component: 2850 - total flux cleaned = 0.000151054 Jy ! Component: 2900 - total flux cleaned = 0.000168794 Jy ! Component: 2950 - total flux cleaned = 0.000168999 Jy ! Component: 3000 - total flux cleaned = 0.00016884 Jy ! Component: 3050 - total flux cleaned = 0.000168713 Jy ! Component: 3100 - total flux cleaned = 0.000168759 Jy ! Component: 3150 - total flux cleaned = 0.000187679 Jy ! Component: 3200 - total flux cleaned = 0.000226177 Jy ! Component: 3250 - total flux cleaned = 0.000207016 Jy ! Component: 3300 - total flux cleaned = 0.000227149 Jy ! Component: 3350 - total flux cleaned = 0.000206872 Jy ! Component: 3400 - total flux cleaned = 0.000247773 Jy ! Component: 3450 - total flux cleaned = 0.00026877 Jy ! Component: 3500 - total flux cleaned = 0.000289843 Jy ! Component: 3550 - total flux cleaned = 0.000332783 Jy ! Component: 3600 - total flux cleaned = 0.000332506 Jy ! Component: 3650 - total flux cleaned = 0.000355029 Jy ! Component: 3700 - total flux cleaned = 0.000332662 Jy ! Component: 3750 - total flux cleaned = 0.000309391 Jy ! Component: 3800 - total flux cleaned = 0.00030948 Jy ! Component: 3850 - total flux cleaned = 0.000333829 Jy ! Component: 3900 - total flux cleaned = 0.000309334 Jy ! Component: 3950 - total flux cleaned = 0.000284878 Jy ! Component: 4000 - total flux cleaned = 0.000259482 Jy ! Component: 4050 - total flux cleaned = 0.00025975 Jy ! Total flux subtracted in 4096 components = 0.000207428 Jy ! Clean residual min=-0.001466 max=0.001432 Jy/beam ! Clean residual mean=-0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0702301 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 416 components and 0.0702301 Jy ![Exited script file: muppet] wmap "J2030-2506_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.699 x 38.72 at -14.69 degrees (North through East) ! Clean map min=-0.0031228 max=0.062141 Jy/beam ! Writing clean map to FITS file: J2030-2506_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0621408 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000541052 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.61206 2.61206 5.22412 10.4482 20.8965 41.793 83.586 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.699 x 38.72 at -14.69 degrees (North through East) ! Clean map min=-0.0031228 max=0.062141 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2030-2506_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:20:08 2019