! Started logfile: J2030-2506_S_2017_02_24_pus_uvs.log on Sat May 4 11:34:53 2019 obs J2030-2506_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2030-2506_S_2017_02_24_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.631034 visibilities/baseline/integration-bin. ! Found source: J2030-2506 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 13176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2030-2506_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 561 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004654Jy sigma=0.006584 ! Fit after self-cal, rms=0.951850Jy sigma=0.006250 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.564 mas, bmaj=6.939 mas, bpa=-9.017 degrees ! Estimated noise=1555.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415199 Jy ! Component: 100 - total flux cleaned = 0.0506318 Jy ! Total flux subtracted in 100 components = 0.0506318 Jy ! Clean residual min=-0.004307 max=0.004272 Jy/beam ! Clean residual mean=0.000005 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.0506319 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0506319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104075Jy sigma=0.000643 ! Fit after self-cal, rms=0.102345Jy sigma=0.000631 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=8.194 mas, bpa=-8.274 degrees ! Estimated noise=1094.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.005394 Jy ! Component: 100 - total flux cleaned = 0.00758938 Jy ! Component: 150 - total flux cleaned = 0.00862779 Jy ! Component: 200 - total flux cleaned = 0.00897122 Jy ! Total flux subtracted in 200 components = 0.00897122 Jy ! Clean residual min=-0.002818 max=0.003202 Jy/beam ! Clean residual mean=0.000005 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.0596031 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.0596031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102057Jy sigma=0.000629 ! Fit after self-cal, rms=0.102035Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.07 HN 1.08 KP 1.03 ! LA 1.01 MK 1.00 NL 0.93 OV 1.05 ! PT 1.08 SC 0.97 ! ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.01 KP 0.98 ! LA 0.96 MK 1.00 NL 1.04 OV 1.04 ! PT 1.09 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.93 KP 1.03 ! LA 1.03 MK 1.08 NL 1.05 OV 0.95 ! PT 1.11 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.94 HN 0.89 KP 1.00* ! LA 0.85 MK 1.01 NL 1.00* OV 0.87 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.102035Jy sigma=0.000629 ! Fit after self-cal, rms=0.102166Jy sigma=0.000631 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=8.137 mas, bpa=-8.488 degrees ! Estimated noise=1122.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115696 Jy ! Component: 100 - total flux cleaned = 0.000166958 Jy ! Component: 150 - total flux cleaned = 0.000180595 Jy ! Component: 200 - total flux cleaned = 0.000204693 Jy ! Total flux subtracted in 200 components = 0.000204693 Jy ! Clean residual min=-0.002734 max=0.002861 Jy/beam ! Clean residual mean=0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0598078 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0598078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102160Jy sigma=0.000631 ! Fit after self-cal, rms=0.102091Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102091Jy sigma=0.000630 ! Fit after self-cal, rms=0.101961Jy sigma=0.000630 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.12 mas, bpa=-8.484 degrees ! Estimated noise=1123.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239227 Jy ! Component: 100 - total flux cleaned = 0.000251122 Jy ! Component: 150 - total flux cleaned = 0.000272412 Jy ! Component: 200 - total flux cleaned = 0.0002927 Jy ! Total flux subtracted in 200 components = 0.0002927 Jy ! Clean residual min=-0.002638 max=0.002711 Jy/beam ! Clean residual mean=0.000004 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0601005 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0601005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101957Jy sigma=0.000630 ! Fit after self-cal, rms=0.101970Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (98.5, 99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143011 Jy ! Component: 100 - total flux cleaned = 0.00149059 Jy ! Component: 150 - total flux cleaned = 0.0015738 Jy ! Component: 200 - total flux cleaned = 0.00170351 Jy ! Total flux subtracted in 200 components = 0.00170351 Jy ! Clean residual min=-0.002550 max=0.002720 Jy/beam ! Clean residual mean=0.000005 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.061804 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.061804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101905Jy sigma=0.000629 ! Fit after self-cal, rms=0.101860Jy sigma=0.000629 ! Inverting map ! Added new window around map position (-70.5, -126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245924 Jy ! Component: 100 - total flux cleaned = 0.00289854 Jy ! Component: 150 - total flux cleaned = 0.00318214 Jy ! Component: 200 - total flux cleaned = 0.00337843 Jy ! Total flux subtracted in 200 components = 0.00337843 Jy ! Clean residual min=-0.002413 max=0.002294 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0651824 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.0651824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101784Jy sigma=0.000628 ! Fit after self-cal, rms=0.101742Jy sigma=0.000628 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101742Jy sigma=0.000628 ! Fit after self-cal, rms=0.101927Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=8.113 mas, bpa=-8.481 degrees ! Estimated noise=1118.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178382 Jy ! Component: 100 - total flux cleaned = 0.00213754 Jy ! Component: 150 - total flux cleaned = 0.00233777 Jy ! Component: 200 - total flux cleaned = 0.0024424 Jy ! Total flux subtracted in 200 components = 0.0024424 Jy ! Clean residual min=-0.002417 max=0.002215 Jy/beam ! Clean residual mean=-0.000001 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0676248 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.0676248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101880Jy sigma=0.000628 ! Fit after self-cal, rms=0.101838Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161339 Jy ! Component: 100 - total flux cleaned = 0.00213373 Jy ! Component: 150 - total flux cleaned = 0.00223617 Jy ! Component: 200 - total flux cleaned = 0.00220647 Jy ! Total flux subtracted in 200 components = 0.00220647 Jy ! Clean residual min=-0.002566 max=0.002183 Jy/beam ! Clean residual mean=-0.000001 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0698313 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 81 components and 0.0698313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101806Jy sigma=0.000627 ! Fit after self-cal, rms=0.101741Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101741Jy sigma=0.000627 ! Fit after self-cal, rms=0.102167Jy sigma=0.000627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.708 mas, bmaj=17.78 mas, bpa=-2.073 degrees ! Estimated noise=1400.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128497 Jy ! Component: 100 - total flux cleaned = 0.00200285 Jy ! Component: 150 - total flux cleaned = 0.00198535 Jy ! Component: 200 - total flux cleaned = 0.00194897 Jy ! Total flux subtracted in 200 components = 0.00194897 Jy ! Clean residual min=-0.002537 max=0.002166 Jy/beam ! Clean residual mean=-0.000001 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0717802 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.0717802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102154Jy sigma=0.000627 ! Fit after self-cal, rms=0.102161Jy sigma=0.000627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854655 Jy ! Component: 100 - total flux cleaned = 0.000976799 Jy ! Component: 150 - total flux cleaned = 0.000958707 Jy ! Component: 200 - total flux cleaned = 0.000923543 Jy ! Total flux subtracted in 200 components = 0.000923543 Jy ! Clean residual min=-0.002659 max=0.002123 Jy/beam ! Clean residual mean=-0.000001 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0727038 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.0727038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102153Jy sigma=0.000626 ! Fit after self-cal, rms=0.102130Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.102 mas, bpa=-8.638 degrees ! Estimated noise=1117.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.102 at -8.638 degrees (North through East) ! Clean map min=-0.0032206 max=0.054948 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=6.976 mas, bpa=-9.376 degrees ! Estimated noise=1561.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433313 Jy ! Component: 100 - total flux cleaned = 0.0542549 Jy ! Component: 150 - total flux cleaned = 0.0590231 Jy ! Component: 200 - total flux cleaned = 0.0612259 Jy ! Total flux subtracted in 200 components = 0.0612259 Jy ! Clean residual min=-0.004674 max=0.004037 Jy/beam ! Clean residual mean=0.000004 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0612259 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0612259 Jy ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.102 mas, bpa=-8.638 degrees ! Estimated noise=1117.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420663 Jy ! Component: 100 - total flux cleaned = 0.00650361 Jy ! Component: 150 - total flux cleaned = 0.00786707 Jy ! Component: 200 - total flux cleaned = 0.00878582 Jy ! Total flux subtracted in 200 components = 0.00878582 Jy ! Clean residual min=-0.003043 max=0.002149 Jy/beam ! Clean residual mean=0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0700117 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 48 components and 0.0700117 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.708 mas, bmaj=17.78 mas, bpa=-2.073 degrees ! Estimated noise=1400.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175219 Jy ! Component: 100 - total flux cleaned = 0.00263708 Jy ! Component: 150 - total flux cleaned = 0.00310379 Jy ! Component: 200 - total flux cleaned = 0.00334186 Jy ! Total flux subtracted in 200 components = 0.00334186 Jy ! Clean residual min=-0.002764 max=0.002088 Jy/beam ! Clean residual mean=0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0733535 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156034 Jy ! Component: 100 - total flux cleaned = 0.000248622 Jy ! Component: 150 - total flux cleaned = 0.000332533 Jy ! Component: 200 - total flux cleaned = 0.000390848 Jy ! Total flux subtracted in 200 components = 0.000390848 Jy ! Clean residual min=-0.002677 max=0.002043 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.0737444 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 80 components and 0.0737444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=8.102 mas, bpa=-8.638 degrees ! Estimated noise=1117.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182171 Jy ! Component: 100 - total flux cleaned = -4.33039e-05 Jy ! Component: 150 - total flux cleaned = 3.78201e-05 Jy ! Component: 200 - total flux cleaned = 3.53452e-05 Jy ! Total flux subtracted in 200 components = 3.53452e-05 Jy ! Clean residual min=-0.002627 max=0.002064 Jy/beam ! Clean residual mean=0.000000 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0737797 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.0737797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102125Jy sigma=0.000626 ! Fit after self-cal, rms=0.102116Jy sigma=0.000626 wmodel J2030-2506_S_2017_02_24_pus_map.mod ! Writing 92 model components to file: J2030-2506_S_2017_02_24_pus_map.mod wobs J2030-2506_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2030-2506_S_2017_02_24_pus_uvs.fits wwins J2030-2506_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J2030-2506_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010775 Jy ! Component: 100 - total flux cleaned = -0.00174878 Jy ! Component: 150 - total flux cleaned = -0.00204818 Jy ! Component: 200 - total flux cleaned = -0.00229921 Jy ! Component: 250 - total flux cleaned = -0.00254197 Jy ! Component: 300 - total flux cleaned = -0.00274444 Jy ! Component: 350 - total flux cleaned = -0.0029405 Jy ! Component: 400 - total flux cleaned = -0.00306812 Jy ! Component: 450 - total flux cleaned = -0.00331859 Jy ! Component: 500 - total flux cleaned = -0.00344114 Jy ! Component: 550 - total flux cleaned = -0.00362165 Jy ! Component: 600 - total flux cleaned = -0.00373961 Jy ! Component: 650 - total flux cleaned = -0.00385579 Jy ! Component: 700 - total flux cleaned = -0.00396969 Jy ! Component: 750 - total flux cleaned = -0.00408233 Jy ! Component: 800 - total flux cleaned = -0.00424851 Jy ! Component: 850 - total flux cleaned = -0.00438519 Jy ! Component: 900 - total flux cleaned = -0.004547 Jy ! Component: 950 - total flux cleaned = -0.00475939 Jy ! Component: 1000 - total flux cleaned = -0.00483782 Jy ! Component: 1050 - total flux cleaned = -0.00491575 Jy ! Component: 1100 - total flux cleaned = -0.0050697 Jy ! Component: 1150 - total flux cleaned = -0.00522097 Jy ! Component: 1200 - total flux cleaned = -0.00542061 Jy ! Component: 1250 - total flux cleaned = -0.00556829 Jy ! Component: 1300 - total flux cleaned = -0.00566579 Jy ! Component: 1350 - total flux cleaned = -0.00578618 Jy ! Component: 1400 - total flux cleaned = -0.00590522 Jy ! Component: 1450 - total flux cleaned = -0.00604595 Jy ! Component: 1500 - total flux cleaned = -0.00611599 Jy ! Component: 1550 - total flux cleaned = -0.00623046 Jy ! Component: 1600 - total flux cleaned = -0.00627564 Jy ! Component: 1650 - total flux cleaned = -0.00636546 Jy ! Component: 1700 - total flux cleaned = -0.00647679 Jy ! Component: 1750 - total flux cleaned = -0.00647666 Jy ! Component: 1800 - total flux cleaned = -0.00649856 Jy ! Component: 1850 - total flux cleaned = -0.00658486 Jy ! Component: 1900 - total flux cleaned = -0.00656333 Jy ! Component: 1950 - total flux cleaned = -0.00660541 Jy ! Component: 2000 - total flux cleaned = -0.00658447 Jy ! Component: 2050 - total flux cleaned = -0.00664695 Jy ! Component: 2100 - total flux cleaned = -0.00668788 Jy ! Component: 2150 - total flux cleaned = -0.00670773 Jy ! Component: 2200 - total flux cleaned = -0.00664661 Jy ! Component: 2250 - total flux cleaned = -0.00662656 Jy ! Component: 2300 - total flux cleaned = -0.00664625 Jy ! Component: 2350 - total flux cleaned = -0.00656739 Jy ! Component: 2400 - total flux cleaned = -0.00656749 Jy ! Component: 2450 - total flux cleaned = -0.00654807 Jy ! Component: 2500 - total flux cleaned = -0.00650977 Jy ! Component: 2550 - total flux cleaned = -0.00649051 Jy ! Component: 2600 - total flux cleaned = -0.00643393 Jy ! Component: 2650 - total flux cleaned = -0.00637792 Jy ! Component: 2700 - total flux cleaned = -0.00637786 Jy ! Component: 2750 - total flux cleaned = -0.00639649 Jy ! Component: 2800 - total flux cleaned = -0.00634157 Jy ! Component: 2850 - total flux cleaned = -0.0063054 Jy ! Component: 2900 - total flux cleaned = -0.00634156 Jy ! Component: 2950 - total flux cleaned = -0.00625224 Jy ! Component: 3000 - total flux cleaned = -0.00619931 Jy ! Component: 3050 - total flux cleaned = -0.00616409 Jy ! Component: 3100 - total flux cleaned = -0.00618143 Jy ! Component: 3150 - total flux cleaned = -0.00616423 Jy ! Component: 3200 - total flux cleaned = -0.00607807 Jy ! Component: 3250 - total flux cleaned = -0.00609544 Jy ! Component: 3300 - total flux cleaned = -0.00607847 Jy ! Component: 3350 - total flux cleaned = -0.0060281 Jy ! Component: 3400 - total flux cleaned = -0.00601164 Jy ! Component: 3450 - total flux cleaned = -0.00606157 Jy ! Component: 3500 - total flux cleaned = -0.00601185 Jy ! Component: 3550 - total flux cleaned = -0.00602829 Jy ! Component: 3600 - total flux cleaned = -0.00602828 Jy ! Component: 3650 - total flux cleaned = -0.00593105 Jy ! Component: 3700 - total flux cleaned = -0.00599544 Jy ! Component: 3750 - total flux cleaned = -0.0059474 Jy ! Component: 3800 - total flux cleaned = -0.00593165 Jy ! Component: 3850 - total flux cleaned = -0.0059632 Jy ! Component: 3900 - total flux cleaned = -0.00594739 Jy ! Component: 3950 - total flux cleaned = -0.00591607 Jy ! Component: 4000 - total flux cleaned = -0.005854 Jy ! Component: 4050 - total flux cleaned = -0.005854 Jy ! Total flux subtracted in 4096 components = -0.00574667 Jy ! Clean residual min=-0.000939 max=0.001057 Jy/beam ! Clean residual mean=-0.000004 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.0680331 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 352 components and 0.0680331 Jy ![Exited script file: muppet] wmap "J2030-2506_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.102 at -8.638 degrees (North through East) ! Clean map min=-0.0033374 max=0.054645 Jy/beam ! Writing clean map to FITS file: J2030-2506_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0546445 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274123 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.50494 1.50494 3.00989 6.01978 12.0396 24.0791 48.1582 96.3165 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.165 x 8.102 at -8.638 degrees (North through East) ! Clean map min=-0.0033374 max=0.054645 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2030-2506_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:34:59 2019