! Started logfile: J2027-2136_S_2017_02_24_pus_uvs.log on Sat May 4 11:34:47 2019 obs J2027-2136_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2027-2136_S_2017_02_24_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.782184 visibilities/baseline/integration-bin. ! Found source: J2027-2136 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16332 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2027-2136_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 182 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 572 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002048Jy sigma=0.006949 ! Fit after self-cal, rms=0.947455Jy sigma=0.006583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=7.088 mas, bpa=-8.337 degrees ! Estimated noise=1262.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440083 Jy ! Component: 100 - total flux cleaned = 0.0537028 Jy ! Total flux subtracted in 100 components = 0.0537028 Jy ! Clean residual min=-0.003805 max=0.003836 Jy/beam ! Clean residual mean=0.000004 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.0537028 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0537028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100543Jy sigma=0.000660 ! Fit after self-cal, rms=0.099199Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=8.084 mas, bpa=-6.93 degrees ! Estimated noise=890.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00537775 Jy ! Component: 100 - total flux cleaned = 0.00775178 Jy ! Component: 150 - total flux cleaned = 0.00898385 Jy ! Component: 200 - total flux cleaned = 0.00949544 Jy ! Total flux subtracted in 200 components = 0.00949544 Jy ! Clean residual min=-0.002452 max=0.002882 Jy/beam ! Clean residual mean=0.000003 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0631983 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.0631983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098901Jy sigma=0.000649 ! Fit after self-cal, rms=0.098911Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.00 KP 0.94 ! LA 0.99 MK 1.04 NL 0.99 OV 1.09 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.06 KP 1.03 ! LA 0.97 MK 1.08 NL 0.94 OV 1.06 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.91 HN 0.98 KP 1.04 ! LA 1.04 MK 1.04 NL 1.05 OV 1.06 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.89 KP 1.00* ! LA 0.80 MK 0.94 NL 1.00* OV 0.89 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.098911Jy sigma=0.000649 ! Fit after self-cal, rms=0.098023Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.113 mas, bpa=-6.967 degrees ! Estimated noise=899.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.98098e-05 Jy ! Component: 100 - total flux cleaned = 8.52194e-05 Jy ! Component: 150 - total flux cleaned = 0.00013238 Jy ! Component: 200 - total flux cleaned = 0.00017538 Jy ! Total flux subtracted in 200 components = 0.00017538 Jy ! Clean residual min=-0.002367 max=0.002427 Jy/beam ! Clean residual mean=0.000009 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0633737 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0633737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098016Jy sigma=0.000649 ! Fit after self-cal, rms=0.097975Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097975Jy sigma=0.000649 ! Fit after self-cal, rms=0.097622Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.083 mas, bpa=-7.014 degrees ! Estimated noise=899.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019645 Jy ! Component: 100 - total flux cleaned = 0.000261988 Jy ! Component: 150 - total flux cleaned = 0.000290052 Jy ! Component: 200 - total flux cleaned = 0.000314931 Jy ! Total flux subtracted in 200 components = 0.000314931 Jy ! Clean residual min=-0.002429 max=0.002640 Jy/beam ! Clean residual mean=0.000005 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0636886 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0636886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097617Jy sigma=0.000648 ! Fit after self-cal, rms=0.097625Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (96, 43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236003 Jy ! Component: 100 - total flux cleaned = 0.0025547 Jy ! Component: 150 - total flux cleaned = 0.00263533 Jy ! Component: 200 - total flux cleaned = 0.00267053 Jy ! Total flux subtracted in 200 components = 0.00267053 Jy ! Clean residual min=-0.002379 max=0.002244 Jy/beam ! Clean residual mean=0.000005 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0663591 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.0663591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097563Jy sigma=0.000648 ! Fit after self-cal, rms=0.097536Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097536Jy sigma=0.000648 ! Fit after self-cal, rms=0.097370Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.083 mas, bpa=-7.156 degrees ! Estimated noise=896.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150319 Jy ! Component: 100 - total flux cleaned = 0.00154562 Jy ! Component: 150 - total flux cleaned = 0.00158096 Jy ! Component: 200 - total flux cleaned = 0.00158144 Jy ! Total flux subtracted in 200 components = 0.00158144 Jy ! Clean residual min=-0.002374 max=0.002192 Jy/beam ! Clean residual mean=0.000003 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0679406 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 62 components and 0.0679406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097332Jy sigma=0.000647 ! Fit after self-cal, rms=0.097328Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000825414 Jy ! Component: 100 - total flux cleaned = 0.000858728 Jy ! Component: 150 - total flux cleaned = 0.000858635 Jy ! Component: 200 - total flux cleaned = 0.000858802 Jy ! Total flux subtracted in 200 components = 0.000858802 Jy ! Clean residual min=-0.002301 max=0.002197 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0687994 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.0687994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097306Jy sigma=0.000647 ! Fit after self-cal, rms=0.097298Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097298Jy sigma=0.000647 ! Fit after self-cal, rms=0.097324Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.61 mas, bmaj=16.74 mas, bpa=-1.584 degrees ! Estimated noise=1129.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728879 Jy ! Component: 100 - total flux cleaned = 0.00101894 Jy ! Component: 150 - total flux cleaned = 0.00112119 Jy ! Component: 200 - total flux cleaned = 0.0011468 Jy ! Total flux subtracted in 200 components = 0.0011468 Jy ! Clean residual min=-0.002216 max=0.002187 Jy/beam ! Clean residual mean=0.000004 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0699462 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 0.0699462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097320Jy sigma=0.000647 ! Fit after self-cal, rms=0.097288Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447355 Jy ! Component: 100 - total flux cleaned = 0.000596144 Jy ! Component: 150 - total flux cleaned = 0.000608747 Jy ! Component: 200 - total flux cleaned = 0.000620604 Jy ! Total flux subtracted in 200 components = 0.000620604 Jy ! Clean residual min=-0.002293 max=0.002280 Jy/beam ! Clean residual mean=0.000005 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0705668 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 81 components and 0.0705668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097286Jy sigma=0.000647 ! Fit after self-cal, rms=0.097287Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.08 mas, bpa=-7.21 degrees ! Estimated noise=895.954 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.08 at -7.21 degrees (North through East) ! Clean map min=-0.0022263 max=0.058125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.152 mas, bpa=-8.769 degrees ! Estimated noise=1251.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450027 Jy ! Component: 100 - total flux cleaned = 0.0552909 Jy ! Component: 150 - total flux cleaned = 0.0598712 Jy ! Component: 200 - total flux cleaned = 0.0617029 Jy ! Total flux subtracted in 200 components = 0.0617029 Jy ! Clean residual min=-0.003736 max=0.003229 Jy/beam ! Clean residual mean=0.000005 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 0.0617029 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0617029 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.08 mas, bpa=-7.21 degrees ! Estimated noise=895.954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00383521 Jy ! Component: 100 - total flux cleaned = 0.00622336 Jy ! Component: 150 - total flux cleaned = 0.00713532 Jy ! Component: 200 - total flux cleaned = 0.00736168 Jy ! Total flux subtracted in 200 components = 0.00736168 Jy ! Clean residual min=-0.002400 max=0.002321 Jy/beam ! Clean residual mean=0.000003 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.0690646 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 35 components and 0.0690646 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.61 mas, bmaj=16.74 mas, bpa=-1.584 degrees ! Estimated noise=1129.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972487 Jy ! Component: 100 - total flux cleaned = 0.00128356 Jy ! Component: 150 - total flux cleaned = 0.00154688 Jy ! Component: 200 - total flux cleaned = 0.00167533 Jy ! Total flux subtracted in 200 components = 0.00167533 Jy ! Clean residual min=-0.002296 max=0.002172 Jy/beam ! Clean residual mean=0.000005 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0707399 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.88523e-05 Jy ! Component: 100 - total flux cleaned = 5.45513e-05 Jy ! Component: 150 - total flux cleaned = 8.78998e-05 Jy ! Component: 200 - total flux cleaned = 0.000103338 Jy ! Total flux subtracted in 200 components = 0.000103338 Jy ! Clean residual min=-0.002292 max=0.002160 Jy/beam ! Clean residual mean=0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0708433 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.0708433 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.08 mas, bpa=-7.21 degrees ! Estimated noise=895.954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45178e-05 Jy ! Component: 100 - total flux cleaned = -0.000221272 Jy ! Component: 150 - total flux cleaned = -0.000359492 Jy ! Component: 200 - total flux cleaned = -0.000451847 Jy ! Total flux subtracted in 200 components = -0.000451847 Jy ! Clean residual min=-0.002317 max=0.002352 Jy/beam ! Clean residual mean=0.000003 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0703914 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.0703914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097290Jy sigma=0.000647 ! Fit after self-cal, rms=0.097286Jy sigma=0.000646 wmodel J2027-2136_S_2017_02_24_pus_map.mod ! Writing 67 model components to file: J2027-2136_S_2017_02_24_pus_map.mod wobs J2027-2136_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2027-2136_S_2017_02_24_pus_uvs.fits wwins J2027-2136_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J2027-2136_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599476 Jy ! Component: 100 - total flux cleaned = -0.00106297 Jy ! Component: 150 - total flux cleaned = -0.00123959 Jy ! Component: 200 - total flux cleaned = -0.00133993 Jy ! Component: 250 - total flux cleaned = -0.00124368 Jy ! Component: 300 - total flux cleaned = -0.00121317 Jy ! Component: 350 - total flux cleaned = -0.00121314 Jy ! Component: 400 - total flux cleaned = -0.00109533 Jy ! Component: 450 - total flux cleaned = -0.00106601 Jy ! Component: 500 - total flux cleaned = -0.000870513 Jy ! Component: 550 - total flux cleaned = -0.000816167 Jy ! Component: 600 - total flux cleaned = -0.000682697 Jy ! Component: 650 - total flux cleaned = -0.000604642 Jy ! Component: 700 - total flux cleaned = -0.000475591 Jy ! Component: 750 - total flux cleaned = -0.00024751 Jy ! Component: 800 - total flux cleaned = -7.3292e-05 Jy ! Component: 850 - total flux cleaned = 0.00019598 Jy ! Component: 900 - total flux cleaned = 0.000388158 Jy ! Component: 950 - total flux cleaned = 0.000530265 Jy ! Component: 1000 - total flux cleaned = 0.000693787 Jy ! Component: 1050 - total flux cleaned = 0.000946777 Jy ! Component: 1100 - total flux cleaned = 0.00117328 Jy ! Component: 1150 - total flux cleaned = 0.00137422 Jy ! Component: 1200 - total flux cleaned = 0.00157236 Jy ! Component: 1250 - total flux cleaned = 0.00174627 Jy ! Component: 1300 - total flux cleaned = 0.0019182 Jy ! Component: 1350 - total flux cleaned = 0.00208774 Jy ! Component: 1400 - total flux cleaned = 0.00223429 Jy ! Component: 1450 - total flux cleaned = 0.00237878 Jy ! Component: 1500 - total flux cleaned = 0.00256231 Jy ! Component: 1550 - total flux cleaned = 0.00262268 Jy ! Component: 1600 - total flux cleaned = 0.00272238 Jy ! Component: 1650 - total flux cleaned = 0.00278151 Jy ! Component: 1700 - total flux cleaned = 0.00289862 Jy ! Component: 1750 - total flux cleaned = 0.00295691 Jy ! Component: 1800 - total flux cleaned = 0.00299544 Jy ! Component: 1850 - total flux cleaned = 0.00309008 Jy ! Component: 1900 - total flux cleaned = 0.00307138 Jy ! Component: 1950 - total flux cleaned = 0.0030901 Jy ! Component: 2000 - total flux cleaned = 0.00314534 Jy ! Component: 2050 - total flux cleaned = 0.00314563 Jy ! Component: 2100 - total flux cleaned = 0.00323588 Jy ! Component: 2150 - total flux cleaned = 0.00327177 Jy ! Component: 2200 - total flux cleaned = 0.00336054 Jy ! Component: 2250 - total flux cleaned = 0.00339544 Jy ! Component: 2300 - total flux cleaned = 0.00343019 Jy ! Component: 2350 - total flux cleaned = 0.00349898 Jy ! Component: 2400 - total flux cleaned = 0.00349898 Jy ! Component: 2450 - total flux cleaned = 0.00348207 Jy ! Component: 2500 - total flux cleaned = 0.00359902 Jy ! Component: 2550 - total flux cleaned = 0.00354898 Jy ! Component: 2600 - total flux cleaned = 0.00359857 Jy ! Component: 2650 - total flux cleaned = 0.00364753 Jy ! Component: 2700 - total flux cleaned = 0.00361514 Jy ! Component: 2750 - total flux cleaned = 0.00367939 Jy ! Component: 2800 - total flux cleaned = 0.00369506 Jy ! Component: 2850 - total flux cleaned = 0.00372652 Jy ! Component: 2900 - total flux cleaned = 0.00380492 Jy ! Component: 2950 - total flux cleaned = 0.00388274 Jy ! Component: 3000 - total flux cleaned = 0.0038672 Jy ! Component: 3050 - total flux cleaned = 0.00388257 Jy ! Component: 3100 - total flux cleaned = 0.00398928 Jy ! Component: 3150 - total flux cleaned = 0.00398928 Jy ! Component: 3200 - total flux cleaned = 0.00403448 Jy ! Component: 3250 - total flux cleaned = 0.00413889 Jy ! Component: 3300 - total flux cleaned = 0.0041093 Jy ! Component: 3350 - total flux cleaned = 0.00416824 Jy ! Component: 3400 - total flux cleaned = 0.00424129 Jy ! Component: 3450 - total flux cleaned = 0.00424116 Jy ! Component: 3500 - total flux cleaned = 0.00425561 Jy ! Component: 3550 - total flux cleaned = 0.00424136 Jy ! Component: 3600 - total flux cleaned = 0.00432706 Jy ! Component: 3650 - total flux cleaned = 0.00434119 Jy ! Component: 3700 - total flux cleaned = 0.00436933 Jy ! Component: 3750 - total flux cleaned = 0.0043973 Jy ! Component: 3800 - total flux cleaned = 0.00442511 Jy ! Component: 3850 - total flux cleaned = 0.00442514 Jy ! Component: 3900 - total flux cleaned = 0.00452132 Jy ! Component: 3950 - total flux cleaned = 0.00450767 Jy ! Component: 4000 - total flux cleaned = 0.00454812 Jy ! Component: 4050 - total flux cleaned = 0.00452104 Jy ! Total flux subtracted in 4096 components = 0.00452105 Jy ! Clean residual min=-0.000871 max=0.000832 Jy/beam ! Clean residual mean=0.000003 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0749125 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 334 components and 0.0749124 Jy ![Exited script file: muppet] wmap "J2027-2136_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.08 at -7.21 degrees (North through East) ! Clean map min=-0.0016456 max=0.057892 Jy/beam ! Writing clean map to FITS file: J2027-2136_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.057892 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000245204 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27066 1.27066 2.54133 5.08266 10.1653 20.3306 40.6613 81.3225 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.08 at -7.21 degrees (North through East) ! Clean map min=-0.0016456 max=0.057892 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2027-2136_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:34:53 2019