! Started logfile: J2025-2845_S_2017_02_24_pus_uvs.log on Sat May 4 11:34:41 2019 obs J2025-2845_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2025-2845_S_2017_02_24_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974222 visibilities/baseline/integration-bin. ! Found source: J2025-2845 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 13152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2025-2845_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782390Jy sigma=0.004749 ! Fit after self-cal, rms=0.773665Jy sigma=0.004698 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.558 mas, bmaj=6.889 mas, bpa=-10.04 degrees ! Estimated noise=1907.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180988 Jy ! Component: 100 - total flux cleaned = 0.221571 Jy ! Total flux subtracted in 100 components = 0.221571 Jy ! Clean residual min=-0.007664 max=0.016811 Jy/beam ! Clean residual mean=-0.000031 rms=0.002251 Jy/beam ! Combined flux in latest and established models = 0.221571 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.221571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126666Jy sigma=0.000704 ! Fit after self-cal, rms=0.126671Jy sigma=0.000704 ! Inverting map ! Added new window around map position (-3.5, -7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174818 Jy ! Component: 100 - total flux cleaned = 0.0275753 Jy ! Total flux subtracted in 100 components = 0.0275753 Jy ! Clean residual min=-0.006759 max=0.008965 Jy/beam ! Clean residual mean=-0.000012 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.249146 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 15 components and 0.249146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123726Jy sigma=0.000683 ! Fit after self-cal, rms=0.123718Jy sigma=0.000683 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=8.186 mas, bpa=-7.572 degrees ! Estimated noise=1105.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992991 Jy ! Component: 100 - total flux cleaned = 0.0141024 Jy ! Component: 150 - total flux cleaned = 0.0158891 Jy ! Component: 200 - total flux cleaned = 0.0164836 Jy ! Total flux subtracted in 200 components = 0.0164836 Jy ! Clean residual min=-0.004705 max=0.005459 Jy/beam ! Clean residual mean=-0.000008 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.26563 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.26563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122664Jy sigma=0.000678 ! Fit after self-cal, rms=0.122684Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.12 KP 0.99 ! LA 0.99 MK 0.99 NL 0.96 OV 1.05 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.23 KP 0.92 ! LA 0.95 MK 0.99 NL 0.92 OV 1.10 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.13 KP 1.03 ! LA 1.02 MK 1.02 NL 1.05 OV 0.97 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.00 KP 1.00* ! LA 0.94 MK 1.03 NL 1.00* OV 0.98 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.122684Jy sigma=0.000678 ! Fit after self-cal, rms=0.123493Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.107 mas, bpa=-7.018 degrees ! Estimated noise=1104.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515683 Jy ! Component: 100 - total flux cleaned = -0.000816504 Jy ! Component: 150 - total flux cleaned = -0.000898712 Jy ! Component: 200 - total flux cleaned = -0.000899934 Jy ! Total flux subtracted in 200 components = -0.000899934 Jy ! Clean residual min=-0.003330 max=0.003500 Jy/beam ! Clean residual mean=-0.000005 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.26473 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.26473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123335Jy sigma=0.000670 ! Fit after self-cal, rms=0.123363Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123363Jy sigma=0.000670 ! Fit after self-cal, rms=0.124552Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.113 mas, bpa=-7.08 degrees ! Estimated noise=1103.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116286 Jy ! Component: 100 - total flux cleaned = -0.00135749 Jy ! Component: 150 - total flux cleaned = -0.001358 Jy ! Component: 200 - total flux cleaned = -0.00139537 Jy ! Total flux subtracted in 200 components = -0.00139537 Jy ! Clean residual min=-0.003309 max=0.003141 Jy/beam ! Clean residual mean=-0.000006 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.263334 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.263334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124515Jy sigma=0.000668 ! Fit after self-cal, rms=0.124532Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.46196e-05 Jy ! Component: 100 - total flux cleaned = -0.000118006 Jy ! Component: 150 - total flux cleaned = -0.000149063 Jy ! Component: 200 - total flux cleaned = -0.000148069 Jy ! Total flux subtracted in 200 components = -0.000148069 Jy ! Clean residual min=-0.003274 max=0.003125 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.263186 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.263186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124515Jy sigma=0.000668 ! Fit after self-cal, rms=0.124513Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124513Jy sigma=0.000668 ! Fit after self-cal, rms=0.125458Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.115 mas, bpa=-7.046 degrees ! Estimated noise=1104.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000835238 Jy ! Component: 100 - total flux cleaned = -0.00101794 Jy ! Component: 150 - total flux cleaned = -0.0011135 Jy ! Component: 200 - total flux cleaned = -0.00120233 Jy ! Total flux subtracted in 200 components = -0.00120233 Jy ! Clean residual min=-0.003386 max=0.002984 Jy/beam ! Clean residual mean=-0.000007 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.261984 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.261984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125438Jy sigma=0.000667 ! Fit after self-cal, rms=0.125446Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119862 Jy ! Component: 100 - total flux cleaned = -0.000146033 Jy ! Component: 150 - total flux cleaned = -0.000145464 Jy ! Component: 200 - total flux cleaned = -0.000168733 Jy ! Total flux subtracted in 200 components = -0.000168733 Jy ! Clean residual min=-0.003383 max=0.002962 Jy/beam ! Clean residual mean=-0.000007 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.261815 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.261815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125435Jy sigma=0.000667 ! Fit after self-cal, rms=0.125433Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125433Jy sigma=0.000667 ! Fit after self-cal, rms=0.125914Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=19.65 mas, bpa=-0.8747 degrees ! Estimated noise=1364.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000434359 Jy ! Component: 100 - total flux cleaned = -0.000490618 Jy ! Component: 150 - total flux cleaned = -0.000541724 Jy ! Component: 200 - total flux cleaned = -0.00058606 Jy ! Total flux subtracted in 200 components = -0.00058606 Jy ! Clean residual min=-0.003617 max=0.003611 Jy/beam ! Clean residual mean=-0.000016 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.261229 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 134 components and 0.261229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125903Jy sigma=0.000667 ! Fit after self-cal, rms=0.125906Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78054e-05 Jy ! Component: 100 - total flux cleaned = -8.71033e-05 Jy ! Component: 150 - total flux cleaned = -0.000105788 Jy ! Component: 200 - total flux cleaned = -0.000106343 Jy ! Total flux subtracted in 200 components = -0.000106343 Jy ! Clean residual min=-0.003600 max=0.003596 Jy/beam ! Clean residual mean=-0.000016 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.261123 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 0.261123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125902Jy sigma=0.000667 ! Fit after self-cal, rms=0.125898Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.113 mas, bpa=-7.015 degrees ! Estimated noise=1105.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.113 at -7.015 degrees (North through East) ! Clean map min=-0.003438 max=0.22651 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.567 mas, bmaj=6.805 mas, bpa=-9.489 degrees ! Estimated noise=1911.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18125 Jy ! Component: 100 - total flux cleaned = 0.221427 Jy ! Component: 150 - total flux cleaned = 0.236564 Jy ! Component: 200 - total flux cleaned = 0.245278 Jy ! Total flux subtracted in 200 components = 0.245278 Jy ! Clean residual min=-0.005514 max=0.004981 Jy/beam ! Clean residual mean=-0.000014 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.245278 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.245278 Jy ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.113 mas, bpa=-7.015 degrees ! Estimated noise=1105.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791962 Jy ! Component: 100 - total flux cleaned = 0.0123598 Jy ! Component: 150 - total flux cleaned = 0.0146239 Jy ! Component: 200 - total flux cleaned = 0.015275 Jy ! Total flux subtracted in 200 components = 0.015275 Jy ! Clean residual min=-0.003557 max=0.002840 Jy/beam ! Clean residual mean=-0.000014 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.260553 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.260553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=19.65 mas, bpa=-0.8747 degrees ! Estimated noise=1364.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466866 Jy ! Component: 100 - total flux cleaned = 0.000610495 Jy ! Component: 150 - total flux cleaned = 0.000558998 Jy ! Component: 200 - total flux cleaned = 0.000515801 Jy ! Total flux subtracted in 200 components = 0.000515801 Jy ! Clean residual min=-0.003713 max=0.003465 Jy/beam ! Clean residual mean=-0.000021 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.261069 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.78641e-05 Jy ! Component: 100 - total flux cleaned = -7.09146e-05 Jy ! Component: 150 - total flux cleaned = -0.000101312 Jy ! Component: 200 - total flux cleaned = -0.000130103 Jy ! Total flux subtracted in 200 components = -0.000130103 Jy ! Clean residual min=-0.003644 max=0.003510 Jy/beam ! Clean residual mean=-0.000019 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.260939 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 67 components and 0.260939 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.159 mas, bmaj=8.113 mas, bpa=-7.015 degrees ! Estimated noise=1105.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213198 Jy ! Component: 100 - total flux cleaned = -0.000212124 Jy ! Component: 150 - total flux cleaned = -0.000211958 Jy ! Component: 200 - total flux cleaned = -0.000211546 Jy ! Total flux subtracted in 200 components = -0.000211546 Jy ! Clean residual min=-0.003239 max=0.002698 Jy/beam ! Clean residual mean=-0.000010 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.260728 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.260727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125933Jy sigma=0.000667 ! Fit after self-cal, rms=0.125918Jy sigma=0.000667 wmodel J2025-2845_S_2017_02_24_pus_map.mod ! Writing 78 model components to file: J2025-2845_S_2017_02_24_pus_map.mod wobs J2025-2845_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2025-2845_S_2017_02_24_pus_uvs.fits wwins J2025-2845_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J2025-2845_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000688972 Jy ! Component: 100 - total flux cleaned = -0.0010792 Jy ! Component: 150 - total flux cleaned = -0.00117054 Jy ! Component: 200 - total flux cleaned = -0.00130177 Jy ! Component: 250 - total flux cleaned = -0.00151226 Jy ! Component: 300 - total flux cleaned = -0.0015518 Jy ! Component: 350 - total flux cleaned = -0.00163058 Jy ! Component: 400 - total flux cleaned = -0.00178618 Jy ! Component: 450 - total flux cleaned = -0.00201437 Jy ! Component: 500 - total flux cleaned = -0.00216346 Jy ! Component: 550 - total flux cleaned = -0.00241869 Jy ! Component: 600 - total flux cleaned = -0.00263225 Jy ! Component: 650 - total flux cleaned = -0.00270243 Jy ! Component: 700 - total flux cleaned = -0.00294203 Jy ! Component: 750 - total flux cleaned = -0.00307608 Jy ! Component: 800 - total flux cleaned = -0.00324078 Jy ! Component: 850 - total flux cleaned = -0.00346693 Jy ! Component: 900 - total flux cleaned = -0.00352999 Jy ! Component: 950 - total flux cleaned = -0.00362362 Jy ! Component: 1000 - total flux cleaned = -0.0036237 Jy ! Component: 1050 - total flux cleaned = -0.00374513 Jy ! Component: 1100 - total flux cleaned = -0.00386515 Jy ! Component: 1150 - total flux cleaned = -0.00392453 Jy ! Component: 1200 - total flux cleaned = -0.00395374 Jy ! Component: 1250 - total flux cleaned = -0.00395384 Jy ! Component: 1300 - total flux cleaned = -0.00403927 Jy ! Component: 1350 - total flux cleaned = -0.00406736 Jy ! Component: 1400 - total flux cleaned = -0.00409486 Jy ! Component: 1450 - total flux cleaned = -0.0041497 Jy ! Component: 1500 - total flux cleaned = -0.00423034 Jy ! Component: 1550 - total flux cleaned = -0.00417627 Jy ! Component: 1600 - total flux cleaned = -0.00428156 Jy ! Component: 1650 - total flux cleaned = -0.00430732 Jy ! Component: 1700 - total flux cleaned = -0.00438471 Jy ! Component: 1750 - total flux cleaned = -0.00443575 Jy ! Component: 1800 - total flux cleaned = -0.0044608 Jy ! Component: 1850 - total flux cleaned = -0.00458583 Jy ! Component: 1900 - total flux cleaned = -0.00456126 Jy ! Component: 1950 - total flux cleaned = -0.00461013 Jy ! Component: 2000 - total flux cleaned = -0.00465849 Jy ! Component: 2050 - total flux cleaned = -0.00475441 Jy ! Component: 2100 - total flux cleaned = -0.00473066 Jy ! Component: 2150 - total flux cleaned = -0.00484775 Jy ! Component: 2200 - total flux cleaned = -0.00484771 Jy ! Component: 2250 - total flux cleaned = -0.00498507 Jy ! Component: 2300 - total flux cleaned = -0.00498526 Jy ! Component: 2350 - total flux cleaned = -0.00503082 Jy ! Component: 2400 - total flux cleaned = -0.00518696 Jy ! Component: 2450 - total flux cleaned = -0.0052972 Jy ! Component: 2500 - total flux cleaned = -0.0052753 Jy ! Component: 2550 - total flux cleaned = -0.00540538 Jy ! Component: 2600 - total flux cleaned = -0.00540573 Jy ! Component: 2650 - total flux cleaned = -0.00542687 Jy ! Component: 2700 - total flux cleaned = -0.0055532 Jy ! Component: 2750 - total flux cleaned = -0.00553224 Jy ! Component: 2800 - total flux cleaned = -0.00555306 Jy ! Component: 2850 - total flux cleaned = -0.00557358 Jy ! Component: 2900 - total flux cleaned = -0.00565488 Jy ! Component: 2950 - total flux cleaned = -0.0056749 Jy ! Component: 3000 - total flux cleaned = -0.00565486 Jy ! Component: 3050 - total flux cleaned = -0.00563496 Jy ! Component: 3100 - total flux cleaned = -0.00571386 Jy ! Component: 3150 - total flux cleaned = -0.00563566 Jy ! Component: 3200 - total flux cleaned = -0.00573283 Jy ! Component: 3250 - total flux cleaned = -0.00565545 Jy ! Component: 3300 - total flux cleaned = -0.00565543 Jy ! Component: 3350 - total flux cleaned = -0.0056554 Jy ! Component: 3400 - total flux cleaned = -0.00556107 Jy ! Component: 3450 - total flux cleaned = -0.00557986 Jy ! Component: 3500 - total flux cleaned = -0.00550548 Jy ! Component: 3550 - total flux cleaned = -0.00543156 Jy ! Component: 3600 - total flux cleaned = -0.00541343 Jy ! Component: 3650 - total flux cleaned = -0.00539525 Jy ! Component: 3700 - total flux cleaned = -0.00543125 Jy ! Component: 3750 - total flux cleaned = -0.00534146 Jy ! Component: 3800 - total flux cleaned = -0.00532347 Jy ! Component: 3850 - total flux cleaned = -0.00527048 Jy ! Component: 3900 - total flux cleaned = -0.00523559 Jy ! Component: 3950 - total flux cleaned = -0.00520074 Jy ! Component: 4000 - total flux cleaned = -0.00513145 Jy ! Component: 4050 - total flux cleaned = -0.00516594 Jy ! Total flux subtracted in 4096 components = -0.0050805 Jy ! Clean residual min=-0.000851 max=0.000907 Jy/beam ! Clean residual mean=-0.000002 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.255647 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 363 components and 0.255647 Jy ![Exited script file: muppet] wmap "J2025-2845_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.113 at -7.015 degrees (North through East) ! Clean map min=-0.0021228 max=0.22894 Jy/beam ! Writing clean map to FITS file: J2025-2845_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228936 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000308916 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.404806 0.404806 0.809612 1.61922 3.23845 6.47689 12.9538 25.9076 51.8151 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.228 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.159 x 8.113 at -7.015 degrees (North through East) ! Clean map min=-0.0021228 max=0.22894 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2025-2845_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:34:47 2019