! Started logfile: J2025+0316_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:34 2019 obs J2025+0316_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2025+0316_S_2017_05_27_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.961446 visibilities/baseline/integration-bin. ! Found source: J2025+0316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2025+0316_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 451 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.703527Jy sigma=0.042828 ! Fit after self-cal, rms=0.695915Jy sigma=0.042633 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=7.561 mas, bpa=-6.67 degrees ! Estimated noise=531.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126725 Jy ! Component: 100 - total flux cleaned = 0.166351 Jy ! Total flux subtracted in 100 components = 0.166351 Jy ! Clean residual min=-0.051817 max=0.063238 Jy/beam ! Clean residual mean=-0.000129 rms=0.018904 Jy/beam ! Combined flux in latest and established models = 0.166351 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.166351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228801Jy sigma=0.006549 ! Fit after self-cal, rms=0.228673Jy sigma=0.006548 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=7.688 mas, bpa=-2.577 degrees ! Estimated noise=433.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364687 Jy ! Component: 100 - total flux cleaned = 0.0539232 Jy ! Component: 150 - total flux cleaned = 0.0553342 Jy ! Component: 200 - total flux cleaned = 0.055722 Jy ! Total flux subtracted in 200 components = 0.055722 Jy ! Clean residual min=-0.053655 max=0.062975 Jy/beam ! Clean residual mean=-0.000419 rms=0.016319 Jy/beam ! Combined flux in latest and established models = 0.222073 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.222073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209458Jy sigma=0.007550 ! Fit after self-cal, rms=0.209221Jy sigma=0.007550 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.62 HN 0.81 KP 0.75 ! LA 0.73 MK 0.95 NL 0.69 OV 0.73 ! PT 0.78 SC 0.72 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 18.30 FD 0.66 HN 0.87 KP 0.73 ! LA 0.71 MK 0.97 NL 0.80 OV 0.75 ! PT 0.77 SC 0.74 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 3.72 FD 0.68 HN 0.86 KP 0.75 ! LA 0.74 MK 1.00 NL 0.77 OV 0.68 ! PT 0.76 SC 0.75 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.77 HN 0.92 KP 1.00* ! LA 36.17 MK 1.21 NL 1.00* OV 1.00* ! PT 0.79 SC 1.00* ! ! ! Fit before self-cal, rms=0.209221Jy sigma=0.007550 ! Fit after self-cal, rms=1.755251Jy sigma=0.001138 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=8.261 mas, bpa=-0.2913 degrees ! Estimated noise=503.416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915551 Jy ! Component: 100 - total flux cleaned = 0.0069496 Jy ! Component: 150 - total flux cleaned = 0.00513977 Jy ! Component: 200 - total flux cleaned = 0.00464885 Jy ! Total flux subtracted in 200 components = 0.00464885 Jy ! Clean residual min=-0.012370 max=0.009074 Jy/beam ! Clean residual mean=-0.000040 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 0.226722 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.226722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.749654Jy sigma=0.001132 ! Fit after self-cal, rms=1.750108Jy sigma=0.001115 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.750108Jy sigma=0.001115 ! Fit after self-cal, rms=1.353731Jy sigma=0.000798 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=8.096 mas, bpa=-1.074 degrees ! Estimated noise=495.859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447564 Jy ! Component: 100 - total flux cleaned = 0.00428112 Jy ! Component: 150 - total flux cleaned = 0.00411813 Jy ! Component: 200 - total flux cleaned = 0.00398849 Jy ! Total flux subtracted in 200 components = 0.00398849 Jy ! Clean residual min=-0.004574 max=0.004565 Jy/beam ! Clean residual mean=0.000017 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.23071 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.23071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353172Jy sigma=0.000793 ! Fit after self-cal, rms=1.353166Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242449 Jy ! Component: 100 - total flux cleaned = -0.000342105 Jy ! Component: 150 - total flux cleaned = -0.000346309 Jy ! Component: 200 - total flux cleaned = -0.000505316 Jy ! Total flux subtracted in 200 components = -0.000505316 Jy ! Clean residual min=-0.004725 max=0.004139 Jy/beam ! Clean residual mean=0.000016 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.230205 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.230205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353059Jy sigma=0.000791 ! Fit after self-cal, rms=1.353062Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.353062Jy sigma=0.000791 ! Fit after self-cal, rms=0.356587Jy sigma=0.000740 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.437 mas, bmaj=8.084 mas, bpa=-1.78 degrees ! Estimated noise=498.061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018899 Jy ! Component: 100 - total flux cleaned = 0.00189226 Jy ! Component: 150 - total flux cleaned = 0.00210127 Jy ! Component: 200 - total flux cleaned = 0.00218429 Jy ! Total flux subtracted in 200 components = 0.00218429 Jy ! Clean residual min=-0.003023 max=0.003210 Jy/beam ! Clean residual mean=0.000005 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.232389 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.232389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355665Jy sigma=0.000738 ! Fit after self-cal, rms=0.355653Jy sigma=0.000738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166919 Jy ! Component: 100 - total flux cleaned = 3.07993e-05 Jy ! Component: 150 - total flux cleaned = -9.23148e-05 Jy ! Component: 200 - total flux cleaned = -0.000149535 Jy ! Total flux subtracted in 200 components = -0.000149535 Jy ! Clean residual min=-0.003102 max=0.003039 Jy/beam ! Clean residual mean=0.000005 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.23224 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.23224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355342Jy sigma=0.000738 ! Fit after self-cal, rms=0.355341Jy sigma=0.000738 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355341Jy sigma=0.000738 ! Fit after self-cal, rms=0.374432Jy sigma=0.000735 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=12.52 mas, bpa=-1.993 degrees ! Estimated noise=597.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284781 Jy ! Component: 100 - total flux cleaned = 0.00275265 Jy ! Component: 150 - total flux cleaned = 0.00257465 Jy ! Component: 200 - total flux cleaned = 0.0024205 Jy ! Total flux subtracted in 200 components = 0.0024205 Jy ! Clean residual min=-0.003372 max=0.002733 Jy/beam ! Clean residual mean=0.000007 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.23466 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.23466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373638Jy sigma=0.000736 ! Fit after self-cal, rms=0.373636Jy sigma=0.000736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.66023e-05 Jy ! Component: 100 - total flux cleaned = -0.00013327 Jy ! Component: 150 - total flux cleaned = -0.000229256 Jy ! Component: 200 - total flux cleaned = -0.000313053 Jy ! Total flux subtracted in 200 components = -0.000313053 Jy ! Clean residual min=-0.003351 max=0.002840 Jy/beam ! Clean residual mean=0.000007 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.234347 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.234347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373286Jy sigma=0.000738 ! Fit after self-cal, rms=0.373285Jy sigma=0.000738 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=8.085 mas, bpa=-2.327 degrees ! Estimated noise=501.499 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 8.085 at -2.327 degrees (North through East) ! Clean map min=-0.0031435 max=0.20425 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.282 mas, bpa=-3.717 degrees ! Estimated noise=636.032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152268 Jy ! Component: 100 - total flux cleaned = 0.201003 Jy ! Component: 150 - total flux cleaned = 0.222887 Jy ! Component: 200 - total flux cleaned = 0.233325 Jy ! Total flux subtracted in 200 components = 0.233325 Jy ! Clean residual min=-0.003495 max=0.004724 Jy/beam ! Clean residual mean=0.000002 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.233325 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.233325 Jy ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=8.085 mas, bpa=-2.327 degrees ! Estimated noise=501.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00380089 Jy ! Component: 100 - total flux cleaned = 0.00380831 Jy ! Component: 150 - total flux cleaned = 0.00370979 Jy ! Component: 200 - total flux cleaned = 0.00347923 Jy ! Total flux subtracted in 200 components = 0.00347923 Jy ! Clean residual min=-0.003188 max=0.002637 Jy/beam ! Clean residual mean=0.000005 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.236804 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 20 components and 0.236804 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=12.52 mas, bpa=-1.993 degrees ! Estimated noise=597.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114449 Jy ! Component: 100 - total flux cleaned = -0.00132316 Jy ! Component: 150 - total flux cleaned = -0.00147291 Jy ! Component: 200 - total flux cleaned = -0.00155813 Jy ! Total flux subtracted in 200 components = -0.00155813 Jy ! Clean residual min=-0.003380 max=0.002798 Jy/beam ! Clean residual mean=0.000008 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.235246 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.4089e-05 Jy ! Component: 100 - total flux cleaned = -0.00013836 Jy ! Component: 150 - total flux cleaned = -0.000168244 Jy ! Component: 200 - total flux cleaned = -0.00022013 Jy ! Total flux subtracted in 200 components = -0.00022013 Jy ! Clean residual min=-0.003381 max=0.002872 Jy/beam ! Clean residual mean=0.000007 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.235026 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.235026 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=8.085 mas, bpa=-2.327 degrees ! Estimated noise=501.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808162 Jy ! Component: 100 - total flux cleaned = 0.000809982 Jy ! Component: 150 - total flux cleaned = 0.000772291 Jy ! Component: 200 - total flux cleaned = 0.000738182 Jy ! Total flux subtracted in 200 components = 0.000738182 Jy ! Clean residual min=-0.003214 max=0.002769 Jy/beam ! Clean residual mean=0.000005 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.235764 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.235764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373059Jy sigma=0.000736 ! Fit after self-cal, rms=0.373052Jy sigma=0.000736 wmodel J2025+0316_S_2017_05_27_pus_map.mod ! Writing 55 model components to file: J2025+0316_S_2017_05_27_pus_map.mod wobs J2025+0316_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2025+0316_S_2017_05_27_pus_uvs.fits wwins J2025+0316_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J2025+0316_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132932 Jy ! Component: 100 - total flux cleaned = -0.00226286 Jy ! Component: 150 - total flux cleaned = -0.00308859 Jy ! Component: 200 - total flux cleaned = -0.00382595 Jy ! Component: 250 - total flux cleaned = -0.00436105 Jy ! Component: 300 - total flux cleaned = -0.00496799 Jy ! Component: 350 - total flux cleaned = -0.0055178 Jy ! Component: 400 - total flux cleaned = -0.0060142 Jy ! Component: 450 - total flux cleaned = -0.00633908 Jy ! Component: 500 - total flux cleaned = -0.0066194 Jy ! Component: 550 - total flux cleaned = -0.00693448 Jy ! Component: 600 - total flux cleaned = -0.00712856 Jy ! Component: 650 - total flux cleaned = -0.00732035 Jy ! Component: 700 - total flux cleaned = -0.00739639 Jy ! Component: 750 - total flux cleaned = -0.00747158 Jy ! Component: 800 - total flux cleaned = -0.00765734 Jy ! Component: 850 - total flux cleaned = -0.00765713 Jy ! Component: 900 - total flux cleaned = -0.00773011 Jy ! Component: 950 - total flux cleaned = -0.00780242 Jy ! Component: 1000 - total flux cleaned = -0.00787392 Jy ! Component: 1050 - total flux cleaned = -0.00794484 Jy ! Component: 1100 - total flux cleaned = -0.00798025 Jy ! Component: 1150 - total flux cleaned = -0.00804996 Jy ! Component: 1200 - total flux cleaned = -0.00815377 Jy ! Component: 1250 - total flux cleaned = -0.00822228 Jy ! Component: 1300 - total flux cleaned = -0.00825656 Jy ! Component: 1350 - total flux cleaned = -0.00835814 Jy ! Component: 1400 - total flux cleaned = -0.00845883 Jy ! Component: 1450 - total flux cleaned = -0.0085255 Jy ! Component: 1500 - total flux cleaned = -0.00849248 Jy ! Component: 1550 - total flux cleaned = -0.00852524 Jy ! Component: 1600 - total flux cleaned = -0.00852547 Jy ! Component: 1650 - total flux cleaned = -0.00862272 Jy ! Component: 1700 - total flux cleaned = -0.00859053 Jy ! Component: 1750 - total flux cleaned = -0.00865465 Jy ! Component: 1800 - total flux cleaned = -0.00862258 Jy ! Component: 1850 - total flux cleaned = -0.00871748 Jy ! Component: 1900 - total flux cleaned = -0.00868587 Jy ! Component: 1950 - total flux cleaned = -0.00865446 Jy ! Component: 2000 - total flux cleaned = -0.00868553 Jy ! Component: 2050 - total flux cleaned = -0.00862372 Jy ! Component: 2100 - total flux cleaned = -0.00871611 Jy ! Component: 2150 - total flux cleaned = -0.00868542 Jy ! Component: 2200 - total flux cleaned = -0.00868558 Jy ! Component: 2250 - total flux cleaned = -0.0086553 Jy ! Component: 2300 - total flux cleaned = -0.00871557 Jy ! Component: 2350 - total flux cleaned = -0.00865568 Jy ! Component: 2400 - total flux cleaned = -0.00874506 Jy ! Component: 2450 - total flux cleaned = -0.00874503 Jy ! Component: 2500 - total flux cleaned = -0.00871573 Jy ! Component: 2550 - total flux cleaned = -0.00874498 Jy ! Component: 2600 - total flux cleaned = -0.0087741 Jy ! Component: 2650 - total flux cleaned = -0.00874522 Jy ! Component: 2700 - total flux cleaned = -0.00877429 Jy ! Component: 2750 - total flux cleaned = -0.00883177 Jy ! Component: 2800 - total flux cleaned = -0.00880304 Jy ! Component: 2850 - total flux cleaned = -0.00880307 Jy ! Component: 2900 - total flux cleaned = -0.00883139 Jy ! Component: 2950 - total flux cleaned = -0.00885955 Jy ! Component: 3000 - total flux cleaned = -0.00888772 Jy ! Component: 3050 - total flux cleaned = -0.0089156 Jy ! Component: 3100 - total flux cleaned = -0.00899918 Jy ! Component: 3150 - total flux cleaned = -0.00897159 Jy ! Component: 3200 - total flux cleaned = -0.00902695 Jy ! Component: 3250 - total flux cleaned = -0.00908193 Jy ! Component: 3300 - total flux cleaned = -0.00905458 Jy ! Component: 3350 - total flux cleaned = -0.00908189 Jy ! Component: 3400 - total flux cleaned = -0.00913628 Jy ! Component: 3450 - total flux cleaned = -0.00921744 Jy ! Component: 3500 - total flux cleaned = -0.0092173 Jy ! Component: 3550 - total flux cleaned = -0.00935149 Jy ! Component: 3600 - total flux cleaned = -0.00935131 Jy ! Component: 3650 - total flux cleaned = -0.00932481 Jy ! Component: 3700 - total flux cleaned = -0.0093513 Jy ! Component: 3750 - total flux cleaned = -0.00940415 Jy ! Component: 3800 - total flux cleaned = -0.0094567 Jy ! Component: 3850 - total flux cleaned = -0.00950909 Jy ! Component: 3900 - total flux cleaned = -0.00953512 Jy ! Component: 3950 - total flux cleaned = -0.00958729 Jy ! Component: 4000 - total flux cleaned = -0.00963922 Jy ! Component: 4050 - total flux cleaned = -0.00969098 Jy ! Total flux subtracted in 4096 components = -0.00974243 Jy ! Clean residual min=-0.001638 max=0.001594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.226021 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 326 components and 0.226021 Jy ![Exited script file: muppet] wmap "J2025+0316_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 8.085 at -2.327 degrees (North through East) ! Clean map min=-0.0028767 max=0.20562 Jy/beam ! Writing clean map to FITS file: J2025+0316_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.20562 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000494103 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.720898 0.720898 1.4418 2.88359 5.76718 11.5344 23.0687 46.1375 92.2749 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.405 x 8.085 at -2.327 degrees (North through East) ! Clean map min=-0.0028767 max=0.20562 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2025+0316_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:38 2019