! Started logfile: J2024-3253_S_2017_01_21_pus_uvs.log on Sun May 5 16:02:27 2019 obs J2024-3253_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2024-3253_S_2017_01_21_pus_uva.fits ! AN table 1: 38 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.746345 visibilities/baseline/integration-bin. ! Found source: J2024-3253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2024-3253_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758770Jy sigma=0.003272 ! Fit after self-cal, rms=0.725058Jy sigma=0.003097 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.261 mas, bmaj=6.758 mas, bpa=-16.62 degrees ! Estimated noise=3904.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232276 Jy ! Component: 100 - total flux cleaned = 0.309916 Jy ! Total flux subtracted in 100 components = 0.309916 Jy ! Clean residual min=-0.027384 max=0.047254 Jy/beam ! Clean residual mean=-0.000040 rms=0.010204 Jy/beam ! Combined flux in latest and established models = 0.309916 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.309916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203499Jy sigma=0.000835 ! Fit after self-cal, rms=0.203376Jy sigma=0.000834 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=7.415 mas, bpa=-14.07 degrees ! Estimated noise=2735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593379 Jy ! Component: 100 - total flux cleaned = 0.0921871 Jy ! Component: 150 - total flux cleaned = 0.112316 Jy ! Component: 200 - total flux cleaned = 0.124758 Jy ! Total flux subtracted in 200 components = 0.124758 Jy ! Clean residual min=-0.024118 max=0.039565 Jy/beam ! Clean residual mean=-0.000033 rms=0.008889 Jy/beam ! Combined flux in latest and established models = 0.434674 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.434674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190727Jy sigma=0.000721 ! Fit after self-cal, rms=0.190649Jy sigma=0.000719 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.11 LA 0.97 ! MK 0.95 NL 0.88 OV 1.66 PT 0.92 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.15 LA 0.95 ! MK 0.98 NL 0.87 OV 1.56 PT 0.89 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.09 LA 0.92 ! MK 1.04 NL 0.91 OV 1.43 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.15 LA 1.02 ! MK 1.16 NL 1.00* OV 1.49 PT 0.91 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.190649Jy sigma=0.000719 ! Fit after self-cal, rms=0.226063Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.706 mas, bmaj=7.407 mas, bpa=-14.1 degrees ! Estimated noise=2732.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000441142 Jy ! Component: 100 - total flux cleaned = -0.000908761 Jy ! Component: 150 - total flux cleaned = -0.00132923 Jy ! Component: 200 - total flux cleaned = -0.0017106 Jy ! Total flux subtracted in 200 components = -0.0017106 Jy ! Clean residual min=-0.015671 max=0.019046 Jy/beam ! Clean residual mean=-0.000010 rms=0.004044 Jy/beam ! Combined flux in latest and established models = 0.432963 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.432963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225817Jy sigma=0.000665 ! Fit after self-cal, rms=0.226848Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226848Jy sigma=0.000664 ! Fit after self-cal, rms=0.228330Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=7.397 mas, bpa=-14.08 degrees ! Estimated noise=2729.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110241 Jy ! Component: 100 - total flux cleaned = -0.0013251 Jy ! Component: 150 - total flux cleaned = -0.00154484 Jy ! Component: 200 - total flux cleaned = -0.00185388 Jy ! Total flux subtracted in 200 components = -0.00185388 Jy ! Clean residual min=-0.015426 max=0.018655 Jy/beam ! Clean residual mean=-0.000011 rms=0.003953 Jy/beam ! Combined flux in latest and established models = 0.431109 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.431109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228135Jy sigma=0.000663 ! Fit after self-cal, rms=0.228193Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49.5, -113.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155941 Jy ! Component: 100 - total flux cleaned = 0.0198834 Jy ! Component: 150 - total flux cleaned = 0.0227316 Jy ! Component: 200 - total flux cleaned = 0.0250912 Jy ! Total flux subtracted in 200 components = 0.0250912 Jy ! Clean residual min=-0.012043 max=0.009719 Jy/beam ! Clean residual mean=-0.000007 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 0.4562 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 79 components and 0.4562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227231Jy sigma=0.000655 ! Fit after self-cal, rms=0.227044Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227044Jy sigma=0.000655 ! Fit after self-cal, rms=0.228117Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=7.387 mas, bpa=-13.92 degrees ! Estimated noise=2713.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031839 Jy ! Component: 100 - total flux cleaned = 0.00472753 Jy ! Component: 150 - total flux cleaned = 0.00600295 Jy ! Component: 200 - total flux cleaned = 0.0069886 Jy ! Total flux subtracted in 200 components = 0.0069886 Jy ! Clean residual min=-0.009566 max=0.009976 Jy/beam ! Clean residual mean=0.000002 rms=0.002356 Jy/beam ! Combined flux in latest and established models = 0.463189 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.463189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227982Jy sigma=0.000653 ! Fit after self-cal, rms=0.227994Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23, 92.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861693 Jy ! Component: 100 - total flux cleaned = 0.0125676 Jy ! Component: 150 - total flux cleaned = 0.0149928 Jy ! Component: 200 - total flux cleaned = 0.0169831 Jy ! Total flux subtracted in 200 components = 0.0169831 Jy ! Clean residual min=-0.009087 max=0.007540 Jy/beam ! Clean residual mean=-0.000006 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 0.480172 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 114 components and 0.480172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227484Jy sigma=0.000651 ! Fit after self-cal, rms=0.227524Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227524Jy sigma=0.000651 ! Fit after self-cal, rms=0.230233Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.856 mas, bmaj=17.8 mas, bpa=-2.942 degrees ! Estimated noise=3779.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295977 Jy ! Component: 100 - total flux cleaned = 0.00504407 Jy ! Component: 150 - total flux cleaned = 0.00565568 Jy ! Component: 200 - total flux cleaned = 0.00612909 Jy ! Total flux subtracted in 200 components = 0.00612909 Jy ! Clean residual min=-0.009843 max=0.008130 Jy/beam ! Clean residual mean=-0.000017 rms=0.002725 Jy/beam ! Combined flux in latest and established models = 0.486301 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 131 components and 0.486301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230143Jy sigma=0.000650 ! Fit after self-cal, rms=0.230159Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.64539e-05 Jy ! Component: 100 - total flux cleaned = 8.89355e-05 Jy ! Component: 150 - total flux cleaned = 0.000334844 Jy ! Component: 200 - total flux cleaned = 0.00065107 Jy ! Total flux subtracted in 200 components = 0.00065107 Jy ! Clean residual min=-0.009270 max=0.007710 Jy/beam ! Clean residual mean=-0.000017 rms=0.002619 Jy/beam ! Combined flux in latest and established models = 0.486952 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 143 components and 0.486952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230142Jy sigma=0.000650 ! Fit after self-cal, rms=0.230111Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.381 mas, bpa=-13.78 degrees ! Estimated noise=2709.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.717 x 7.381 at -13.78 degrees (North through East) ! Clean map min=-0.0088463 max=0.29609 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.296 mas, bmaj=6.683 mas, bpa=-16.5 degrees ! Estimated noise=3911.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231474 Jy ! Component: 100 - total flux cleaned = 0.306766 Jy ! Component: 150 - total flux cleaned = 0.350802 Jy ! Component: 200 - total flux cleaned = 0.378463 Jy ! Total flux subtracted in 200 components = 0.378463 Jy ! Clean residual min=-0.015978 max=0.017734 Jy/beam ! Clean residual mean=-0.000014 rms=0.004704 Jy/beam ! Combined flux in latest and established models = 0.378463 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.378463 Jy ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.381 mas, bpa=-13.78 degrees ! Estimated noise=2709.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224761 Jy ! Component: 100 - total flux cleaned = 0.0374149 Jy ! Component: 150 - total flux cleaned = 0.0487449 Jy ! Component: 200 - total flux cleaned = 0.0560829 Jy ! Total flux subtracted in 200 components = 0.0560829 Jy ! Clean residual min=-0.011612 max=0.010273 Jy/beam ! Clean residual mean=-0.000014 rms=0.002870 Jy/beam ! Combined flux in latest and established models = 0.434545 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 33 components and 0.434545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.856 mas, bmaj=17.8 mas, bpa=-2.942 degrees ! Estimated noise=3779.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012668 Jy ! Component: 100 - total flux cleaned = 0.0207554 Jy ! Component: 150 - total flux cleaned = 0.0267342 Jy ! Component: 200 - total flux cleaned = 0.0305576 Jy ! Total flux subtracted in 200 components = 0.0305576 Jy ! Clean residual min=-0.012540 max=0.009530 Jy/beam ! Clean residual mean=-0.000021 rms=0.003535 Jy/beam ! Combined flux in latest and established models = 0.465103 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242792 Jy ! Component: 100 - total flux cleaned = 0.00443044 Jy ! Component: 150 - total flux cleaned = 0.00611652 Jy ! Component: 200 - total flux cleaned = 0.0072113 Jy ! Total flux subtracted in 200 components = 0.0072113 Jy ! Clean residual min=-0.011161 max=0.008786 Jy/beam ! Clean residual mean=-0.000020 rms=0.003115 Jy/beam ! Combined flux in latest and established models = 0.472314 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 83 components and 0.472314 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.717 mas, bmaj=7.381 mas, bpa=-13.78 degrees ! Estimated noise=2709.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018368 Jy ! Component: 100 - total flux cleaned = -0.000701681 Jy ! Component: 150 - total flux cleaned = 0.000278007 Jy ! Component: 200 - total flux cleaned = 0.00127794 Jy ! Total flux subtracted in 200 components = 0.00127794 Jy ! Clean residual min=-0.008524 max=0.007881 Jy/beam ! Clean residual mean=-0.000009 rms=0.001840 Jy/beam ! Combined flux in latest and established models = 0.473592 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.473592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230165Jy sigma=0.000651 ! Fit after self-cal, rms=0.230020Jy sigma=0.000651 wmodel J2024-3253_S_2017_01_21_pus_map.mod ! Writing 105 model components to file: J2024-3253_S_2017_01_21_pus_map.mod wobs J2024-3253_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2024-3253_S_2017_01_21_pus_uvs.fits wwins J2024-3253_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J2024-3253_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000965202 Jy ! Component: 100 - total flux cleaned = -0.00108366 Jy ! Component: 150 - total flux cleaned = -0.00129092 Jy ! Component: 200 - total flux cleaned = -0.00101503 Jy ! Component: 250 - total flux cleaned = -0.000748521 Jy ! Component: 300 - total flux cleaned = -0.000324382 Jy ! Component: 350 - total flux cleaned = 0.000158555 Jy ! Component: 400 - total flux cleaned = 0.000314105 Jy ! Component: 450 - total flux cleaned = 0.000538026 Jy ! Component: 500 - total flux cleaned = 0.000391576 Jy ! Component: 550 - total flux cleaned = 0.000251551 Jy ! Component: 600 - total flux cleaned = 0.000117832 Jy ! Component: 650 - total flux cleaned = 0.000118773 Jy ! Component: 700 - total flux cleaned = -8.88115e-06 Jy ! Component: 750 - total flux cleaned = -0.000194799 Jy ! Component: 800 - total flux cleaned = -0.000435137 Jy ! Component: 850 - total flux cleaned = -0.00061266 Jy ! Component: 900 - total flux cleaned = -0.000787475 Jy ! Component: 950 - total flux cleaned = -0.000957746 Jy ! Component: 1000 - total flux cleaned = -0.00117762 Jy ! Component: 1050 - total flux cleaned = -0.00144688 Jy ! Component: 1100 - total flux cleaned = -0.00160468 Jy ! Component: 1150 - total flux cleaned = -0.00165641 Jy ! Component: 1200 - total flux cleaned = -0.00186119 Jy ! Component: 1250 - total flux cleaned = -0.00196081 Jy ! Component: 1300 - total flux cleaned = -0.00210899 Jy ! Component: 1350 - total flux cleaned = -0.00220589 Jy ! Component: 1400 - total flux cleaned = -0.00220577 Jy ! Component: 1450 - total flux cleaned = -0.00234664 Jy ! Component: 1500 - total flux cleaned = -0.00243955 Jy ! Component: 1550 - total flux cleaned = -0.00257704 Jy ! Component: 1600 - total flux cleaned = -0.00280333 Jy ! Component: 1650 - total flux cleaned = -0.00302719 Jy ! Component: 1700 - total flux cleaned = -0.00320421 Jy ! Component: 1750 - total flux cleaned = -0.00342344 Jy ! Component: 1800 - total flux cleaned = -0.00359686 Jy ! Component: 1850 - total flux cleaned = -0.00385418 Jy ! Component: 1900 - total flux cleaned = -0.00398143 Jy ! Component: 1950 - total flux cleaned = -0.0041499 Jy ! Component: 2000 - total flux cleaned = -0.00423333 Jy ! Component: 2050 - total flux cleaned = -0.00444038 Jy ! Component: 2100 - total flux cleaned = -0.00448131 Jy ! Component: 2150 - total flux cleaned = -0.00452195 Jy ! Component: 2200 - total flux cleaned = -0.00464311 Jy ! Component: 2250 - total flux cleaned = -0.00472343 Jy ! Component: 2300 - total flux cleaned = -0.00484321 Jy ! Component: 2350 - total flux cleaned = -0.00480355 Jy ! Component: 2400 - total flux cleaned = -0.00476419 Jy ! Component: 2450 - total flux cleaned = -0.00484341 Jy ! Component: 2500 - total flux cleaned = -0.00496136 Jy ! Component: 2550 - total flux cleaned = -0.00496127 Jy ! Component: 2600 - total flux cleaned = -0.00511826 Jy ! Component: 2650 - total flux cleaned = -0.00507914 Jy ! Component: 2700 - total flux cleaned = -0.0052356 Jy ! Component: 2750 - total flux cleaned = -0.00535301 Jy ! Component: 2800 - total flux cleaned = -0.00543098 Jy ! Component: 2850 - total flux cleaned = -0.00554799 Jy ! Component: 2900 - total flux cleaned = -0.00562602 Jy ! Component: 2950 - total flux cleaned = -0.00566524 Jy ! Component: 3000 - total flux cleaned = -0.00574334 Jy ! Component: 3050 - total flux cleaned = -0.00586006 Jy ! Component: 3100 - total flux cleaned = -0.00597714 Jy ! Component: 3150 - total flux cleaned = -0.00613347 Jy ! Component: 3200 - total flux cleaned = -0.00628985 Jy ! Component: 3250 - total flux cleaned = -0.00640724 Jy ! Component: 3300 - total flux cleaned = -0.00652473 Jy ! Component: 3350 - total flux cleaned = -0.00664248 Jy ! Component: 3400 - total flux cleaned = -0.00672107 Jy ! Component: 3450 - total flux cleaned = -0.00679985 Jy ! Component: 3500 - total flux cleaned = -0.00691854 Jy ! Component: 3550 - total flux cleaned = -0.00695838 Jy ! Component: 3600 - total flux cleaned = -0.00703772 Jy ! Component: 3650 - total flux cleaned = -0.00715755 Jy ! Component: 3700 - total flux cleaned = -0.00731746 Jy ! Component: 3750 - total flux cleaned = -0.00735781 Jy ! Component: 3800 - total flux cleaned = -0.00743881 Jy ! Component: 3850 - total flux cleaned = -0.00756006 Jy ! Component: 3900 - total flux cleaned = -0.00776296 Jy ! Component: 3950 - total flux cleaned = -0.00784498 Jy ! Component: 4000 - total flux cleaned = -0.00788593 Jy ! Component: 4050 - total flux cleaned = -0.00800962 Jy ! Total flux subtracted in 4096 components = -0.00817504 Jy ! Clean residual min=-0.002460 max=0.002408 Jy/beam ! Clean residual mean=-0.000000 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.465417 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 314 components and 0.465417 Jy ![Exited script file: muppet] wmap "J2024-3253_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.717 x 7.381 at -13.78 degrees (North through East) ! Clean map min=-0.0051242 max=0.29947 Jy/beam ! Writing clean map to FITS file: J2024-3253_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.299474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000704756 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.705994 0.705994 1.41199 2.82398 5.64795 11.2959 22.5918 45.1836 90.3673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.299 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.717 x 7.381 at -13.78 degrees (North through East) ! Clean map min=-0.0051242 max=0.29947 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2024-3253_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:02:31 2019