! Started logfile: J2024-3253_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:03 2019 obs J2024-3253_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2024-3253_S_2017_01_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.773926 visibilities/baseline/integration-bin. ! Found source: J2024-3253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2024-3253_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.738203Jy sigma=0.003677 ! Fit after self-cal, rms=0.708792Jy sigma=0.003509 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=14.84 mas, bpa=8.685 degrees ! Estimated noise=2160.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253437 Jy ! Component: 100 - total flux cleaned = 0.330829 Jy ! Total flux subtracted in 100 components = 0.330829 Jy ! Clean residual min=-0.029262 max=0.041479 Jy/beam ! Clean residual mean=0.000033 rms=0.008764 Jy/beam ! Combined flux in latest and established models = 0.330829 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.330829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196243Jy sigma=0.000977 ! Fit after self-cal, rms=0.196268Jy sigma=0.000976 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=16.94 mas, bpa=8.537 degrees ! Estimated noise=1393.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408662 Jy ! Component: 100 - total flux cleaned = 0.0600565 Jy ! Component: 150 - total flux cleaned = 0.0647068 Jy ! Component: 200 - total flux cleaned = 0.0654305 Jy ! Total flux subtracted in 200 components = 0.0654305 Jy ! Clean residual min=-0.025155 max=0.036503 Jy/beam ! Clean residual mean=-0.000010 rms=0.010157 Jy/beam ! Combined flux in latest and established models = 0.39626 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.39626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192688Jy sigma=0.000906 ! Fit after self-cal, rms=0.192730Jy sigma=0.000906 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.77 HN 1.16 KP 0.92 ! LA 0.85 MK 1.00* NL 0.84 OV 0.91 ! PT 2.13 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.81 HN 1.18 KP 0.88 ! LA 0.82 MK 1.00* NL 0.94 OV 0.95 ! PT 2.14 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.36 FD 0.83 HN 1.15 KP 0.91 ! LA 0.85 MK 1.00* NL 0.90 OV 0.87 ! PT 2.23 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.87 HN 1.20 KP 1.07 ! LA 0.88 MK 1.00* NL 1.00* OV 0.91 ! PT 2.30 SC 0.86 ! ! ! Fit before self-cal, rms=0.192730Jy sigma=0.000906 ! Fit after self-cal, rms=0.238198Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=16.99 mas, bpa=8.949 degrees ! Estimated noise=1380.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331429 Jy ! Component: 100 - total flux cleaned = 0.000118629 Jy ! Component: 150 - total flux cleaned = 0.000129363 Jy ! Component: 200 - total flux cleaned = 0.000134663 Jy ! Total flux subtracted in 200 components = 0.000134663 Jy ! Clean residual min=-0.010785 max=0.014145 Jy/beam ! Clean residual mean=0.000018 rms=0.003434 Jy/beam ! Combined flux in latest and established models = 0.396395 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.396395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237866Jy sigma=0.000702 ! Fit after self-cal, rms=0.240044Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240044Jy sigma=0.000701 ! Fit after self-cal, rms=0.239880Jy sigma=0.000701 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=16.93 mas, bpa=8.983 degrees ! Estimated noise=1371.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000672239 Jy ! Component: 100 - total flux cleaned = -0.000937665 Jy ! Component: 150 - total flux cleaned = -0.000934739 Jy ! Component: 200 - total flux cleaned = -0.0010386 Jy ! Total flux subtracted in 200 components = -0.0010386 Jy ! Clean residual min=-0.010276 max=0.013684 Jy/beam ! Clean residual mean=0.000020 rms=0.003373 Jy/beam ! Combined flux in latest and established models = 0.395356 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.395356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239712Jy sigma=0.000700 ! Fit after self-cal, rms=0.239726Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211311 Jy ! Component: 100 - total flux cleaned = -0.000496747 Jy ! Component: 150 - total flux cleaned = -0.00067922 Jy ! Component: 200 - total flux cleaned = -0.000943983 Jy ! Total flux subtracted in 200 components = -0.000943983 Jy ! Clean residual min=-0.010312 max=0.013601 Jy/beam ! Clean residual mean=0.000020 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 0.394412 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.394412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239645Jy sigma=0.000699 ! Fit after self-cal, rms=0.239640Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239640Jy sigma=0.000699 ! Fit after self-cal, rms=0.267461Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=16.83 mas, bpa=8.975 degrees ! Estimated noise=1365.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566847 Jy ! Component: 100 - total flux cleaned = 0.000279082 Jy ! Component: 150 - total flux cleaned = 0.000229718 Jy ! Component: 200 - total flux cleaned = 0.000182395 Jy ! Total flux subtracted in 200 components = 0.000182395 Jy ! Clean residual min=-0.006190 max=0.010890 Jy/beam ! Clean residual mean=-0.000004 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.394594 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.394594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267424Jy sigma=0.000674 ! Fit after self-cal, rms=0.267523Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976095 Jy ! Component: 100 - total flux cleaned = 0.0146763 Jy ! Component: 150 - total flux cleaned = 0.0159911 Jy ! Component: 200 - total flux cleaned = 0.0162619 Jy ! Total flux subtracted in 200 components = 0.0162619 Jy ! Clean residual min=-0.005330 max=0.008446 Jy/beam ! Clean residual mean=0.000013 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.410856 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.410856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267024Jy sigma=0.000669 ! Fit after self-cal, rms=0.267005Jy sigma=0.000668 ! Inverting map ! Added new window around map position (33, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081958 Jy ! Component: 100 - total flux cleaned = 0.0106933 Jy ! Component: 150 - total flux cleaned = 0.0116256 Jy ! Component: 200 - total flux cleaned = 0.0125157 Jy ! Total flux subtracted in 200 components = 0.0125157 Jy ! Clean residual min=-0.004578 max=0.005266 Jy/beam ! Clean residual mean=0.000002 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 0.423372 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 129 components and 0.423372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266681Jy sigma=0.000665 ! Fit after self-cal, rms=0.266634Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266634Jy sigma=0.000665 ! Fit after self-cal, rms=0.263305Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.017 mas, bmaj=24.13 mas, bpa=-0.2509 degrees ! Estimated noise=1625.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058026 Jy ! Component: 100 - total flux cleaned = 0.00927357 Jy ! Component: 150 - total flux cleaned = 0.0110406 Jy ! Component: 200 - total flux cleaned = 0.0115216 Jy ! Total flux subtracted in 200 components = 0.0115216 Jy ! Clean residual min=-0.004589 max=0.005742 Jy/beam ! Clean residual mean=-0.000000 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.434894 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 183 components and 0.434894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263200Jy sigma=0.000663 ! Fit after self-cal, rms=0.263161Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217952 Jy ! Component: 100 - total flux cleaned = 0.00242375 Jy ! Component: 150 - total flux cleaned = 0.00247858 Jy ! Component: 200 - total flux cleaned = 0.00238444 Jy ! Total flux subtracted in 200 components = 0.00238444 Jy ! Clean residual min=-0.004528 max=0.005643 Jy/beam ! Clean residual mean=-0.000000 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.437278 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 225 components and 0.437278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263130Jy sigma=0.000663 ! Fit after self-cal, rms=0.263135Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=16.84 mas, bpa=9.022 degrees ! Estimated noise=1356.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 16.84 at 9.022 degrees (North through East) ! Clean map min=-0.0046524 max=0.33751 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=15.02 mas, bpa=9.189 degrees ! Estimated noise=2020.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2363 Jy ! Component: 100 - total flux cleaned = 0.305838 Jy ! Component: 150 - total flux cleaned = 0.345448 Jy ! Component: 200 - total flux cleaned = 0.368415 Jy ! Total flux subtracted in 200 components = 0.368415 Jy ! Clean residual min=-0.008229 max=0.011484 Jy/beam ! Clean residual mean=0.000006 rms=0.002503 Jy/beam ! Combined flux in latest and established models = 0.368415 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.368415 Jy ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=16.84 mas, bpa=9.022 degrees ! Estimated noise=1356.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182411 Jy ! Component: 100 - total flux cleaned = 0.0308667 Jy ! Component: 150 - total flux cleaned = 0.0404354 Jy ! Component: 200 - total flux cleaned = 0.047942 Jy ! Total flux subtracted in 200 components = 0.047942 Jy ! Clean residual min=-0.005626 max=0.006347 Jy/beam ! Clean residual mean=-0.000001 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.416357 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 49 components and 0.416357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.017 mas, bmaj=24.13 mas, bpa=-0.2509 degrees ! Estimated noise=1625.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00896238 Jy ! Component: 100 - total flux cleaned = 0.0152527 Jy ! Component: 150 - total flux cleaned = 0.0199993 Jy ! Component: 200 - total flux cleaned = 0.022703 Jy ! Total flux subtracted in 200 components = 0.022703 Jy ! Clean residual min=-0.005773 max=0.005866 Jy/beam ! Clean residual mean=0.000008 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.43906 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050485 Jy ! Component: 100 - total flux cleaned = 0.00118384 Jy ! Component: 150 - total flux cleaned = 0.00148732 Jy ! Component: 200 - total flux cleaned = 0.00177404 Jy ! Total flux subtracted in 200 components = 0.00177404 Jy ! Clean residual min=-0.005433 max=0.005828 Jy/beam ! Clean residual mean=0.000006 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.440834 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 130 components and 0.440834 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=16.84 mas, bpa=9.022 degrees ! Estimated noise=1356.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.97003e-05 Jy ! Component: 100 - total flux cleaned = 0.000344482 Jy ! Component: 150 - total flux cleaned = 0.000523486 Jy ! Component: 200 - total flux cleaned = 0.000764734 Jy ! Total flux subtracted in 200 components = 0.000764734 Jy ! Clean residual min=-0.004722 max=0.004728 Jy/beam ! Clean residual mean=0.000003 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.441599 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 152 components and 0.441599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263193Jy sigma=0.000664 ! Fit after self-cal, rms=0.263187Jy sigma=0.000663 wmodel J2024-3253_S_2017_01_16_pus_map.mod ! Writing 152 model components to file: J2024-3253_S_2017_01_16_pus_map.mod wobs J2024-3253_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2024-3253_S_2017_01_16_pus_uvs.fits wwins J2024-3253_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J2024-3253_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219105 Jy ! Component: 100 - total flux cleaned = 0.000909855 Jy ! Component: 150 - total flux cleaned = 0.00142114 Jy ! Component: 200 - total flux cleaned = 0.00172207 Jy ! Component: 250 - total flux cleaned = 0.0018377 Jy ! Component: 300 - total flux cleaned = 0.0018925 Jy ! Component: 350 - total flux cleaned = 0.00178568 Jy ! Component: 400 - total flux cleaned = 0.001734 Jy ! Component: 450 - total flux cleaned = 0.00183228 Jy ! Component: 500 - total flux cleaned = 0.00178429 Jy ! Component: 550 - total flux cleaned = 0.0016462 Jy ! Component: 600 - total flux cleaned = 0.00169268 Jy ! Component: 650 - total flux cleaned = 0.00191513 Jy ! Component: 700 - total flux cleaned = 0.00208929 Jy ! Component: 750 - total flux cleaned = 0.00230246 Jy ! Component: 800 - total flux cleaned = 0.00247014 Jy ! Component: 850 - total flux cleaned = 0.00275614 Jy ! Component: 900 - total flux cleaned = 0.00271531 Jy ! Component: 950 - total flux cleaned = 0.00283273 Jy ! Component: 1000 - total flux cleaned = 0.00290932 Jy ! Component: 1050 - total flux cleaned = 0.00294763 Jy ! Component: 1100 - total flux cleaned = 0.00298591 Jy ! Component: 1150 - total flux cleaned = 0.00294884 Jy ! Component: 1200 - total flux cleaned = 0.00302118 Jy ! Component: 1250 - total flux cleaned = 0.00298543 Jy ! Component: 1300 - total flux cleaned = 0.00298579 Jy ! Component: 1350 - total flux cleaned = 0.00302168 Jy ! Component: 1400 - total flux cleaned = 0.00319427 Jy ! Component: 1450 - total flux cleaned = 0.003058 Jy ! Component: 1500 - total flux cleaned = 0.00309209 Jy ! Component: 1550 - total flux cleaned = 0.00305898 Jy ! Component: 1600 - total flux cleaned = 0.00292737 Jy ! Component: 1650 - total flux cleaned = 0.00286209 Jy ! Component: 1700 - total flux cleaned = 0.00282965 Jy ! Component: 1750 - total flux cleaned = 0.00260658 Jy ! Component: 1800 - total flux cleaned = 0.0026072 Jy ! Component: 1850 - total flux cleaned = 0.00260693 Jy ! Component: 1900 - total flux cleaned = 0.00266864 Jy ! Component: 1950 - total flux cleaned = 0.00251507 Jy ! Component: 2000 - total flux cleaned = 0.00254569 Jy ! Component: 2050 - total flux cleaned = 0.00254596 Jy ! Component: 2100 - total flux cleaned = 0.00254574 Jy ! Component: 2150 - total flux cleaned = 0.00248654 Jy ! Component: 2200 - total flux cleaned = 0.00254503 Jy ! Component: 2250 - total flux cleaned = 0.00254466 Jy ! Component: 2300 - total flux cleaned = 0.00248674 Jy ! Component: 2350 - total flux cleaned = 0.00251561 Jy ! Component: 2400 - total flux cleaned = 0.00260069 Jy ! Component: 2450 - total flux cleaned = 0.00260108 Jy ! Component: 2500 - total flux cleaned = 0.00274098 Jy ! Component: 2550 - total flux cleaned = 0.00268568 Jy ! Component: 2600 - total flux cleaned = 0.0028232 Jy ! Component: 2650 - total flux cleaned = 0.00279554 Jy ! Component: 2700 - total flux cleaned = 0.00285007 Jy ! Component: 2750 - total flux cleaned = 0.00293079 Jy ! Component: 2800 - total flux cleaned = 0.00298423 Jy ! Component: 2850 - total flux cleaned = 0.00306366 Jy ! Component: 2900 - total flux cleaned = 0.00314267 Jy ! Component: 2950 - total flux cleaned = 0.00306412 Jy ! Component: 3000 - total flux cleaned = 0.0031682 Jy ! Component: 3050 - total flux cleaned = 0.00319393 Jy ! Component: 3100 - total flux cleaned = 0.00324509 Jy ! Component: 3150 - total flux cleaned = 0.00329561 Jy ! Component: 3200 - total flux cleaned = 0.00334613 Jy ! Component: 3250 - total flux cleaned = 0.00329605 Jy ! Component: 3300 - total flux cleaned = 0.00337049 Jy ! Component: 3350 - total flux cleaned = 0.00341978 Jy ! Component: 3400 - total flux cleaned = 0.00349366 Jy ! Component: 3450 - total flux cleaned = 0.00346907 Jy ! Component: 3500 - total flux cleaned = 0.00351758 Jy ! Component: 3550 - total flux cleaned = 0.00359016 Jy ! Component: 3600 - total flux cleaned = 0.00359006 Jy ! Component: 3650 - total flux cleaned = 0.00366128 Jy ! Component: 3700 - total flux cleaned = 0.00368478 Jy ! Component: 3750 - total flux cleaned = 0.00373211 Jy ! Component: 3800 - total flux cleaned = 0.00384864 Jy ! Component: 3850 - total flux cleaned = 0.00387155 Jy ! Component: 3900 - total flux cleaned = 0.00387133 Jy ! Component: 3950 - total flux cleaned = 0.00387138 Jy ! Component: 4000 - total flux cleaned = 0.00396287 Jy ! Component: 4050 - total flux cleaned = 0.00391767 Jy ! Total flux subtracted in 4096 components = 0.00400805 Jy ! Clean residual min=-0.001230 max=0.001239 Jy/beam ! Clean residual mean=-0.000004 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.445607 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 456 components and 0.445607 Jy ![Exited script file: muppet] wmap "J2024-3253_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 16.84 at 9.022 degrees (North through East) ! Clean map min=-0.0036471 max=0.33054 Jy/beam ! Writing clean map to FITS file: J2024-3253_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.33054 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00044698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.405682 0.405682 0.811363 1.62273 3.24545 6.49091 12.9818 25.9636 51.9273 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.33 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.771 x 16.84 at 9.022 degrees (North through East) ! Clean map min=-0.0036471 max=0.33054 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2024-3253_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:08 2019