! Started logfile: J2024+0027_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:29 2019 obs J2024+0027_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2024+0027_S_2017_05_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.886265 visibilities/baseline/integration-bin. ! Found source: J2024+0027 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 22972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2024+0027_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 85 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 744 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887075Jy sigma=0.027234 ! Fit after self-cal, rms=0.870146Jy sigma=0.027178 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=6.625 mas, bpa=-2.99 degrees ! Estimated noise=797.719 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785538 Jy ! Component: 100 - total flux cleaned = 0.097165 Jy ! Total flux subtracted in 100 components = 0.097165 Jy ! Clean residual min=-0.012311 max=0.021361 Jy/beam ! Clean residual mean=0.000007 rms=0.003709 Jy/beam ! Combined flux in latest and established models = 0.097165 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.097165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115544Jy sigma=0.002482 ! Fit after self-cal, rms=0.115485Jy sigma=0.002479 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.111 mas, bmaj=7.627 mas, bpa=-4.793 degrees ! Estimated noise=476.521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, 45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226625 Jy ! Component: 100 - total flux cleaned = 0.032874 Jy ! Component: 150 - total flux cleaned = 0.0356924 Jy ! Component: 200 - total flux cleaned = 0.0368755 Jy ! Total flux subtracted in 200 components = 0.0368755 Jy ! Clean residual min=-0.009468 max=0.017832 Jy/beam ! Clean residual mean=0.000002 rms=0.002849 Jy/beam ! Combined flux in latest and established models = 0.134041 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.134041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113889Jy sigma=0.002033 ! Fit after self-cal, rms=0.113186Jy sigma=0.002030 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.80 HN 0.89 KP 0.88 ! LA 0.90 MK 0.86 NL 0.85 OV 0.97 ! PT 0.98 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 12.41 FD 0.87 HN 0.96 KP 0.88 ! LA 0.87 MK 15.85 NL 0.96 OV 1.02 ! PT 0.96 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.86 HN 0.95 KP 0.86 ! LA 0.90 MK 0.90 NL 0.93 OV 0.95 ! PT 0.96 SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 10.32 HN 0.82 KP 1.00* ! LA 0.78 MK 1.06 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.113186Jy sigma=0.002030 ! Fit after self-cal, rms=1.162742Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.388 mas, bmaj=8.183 mas, bpa=-1.213 degrees ! Estimated noise=571.241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423829 Jy ! Component: 100 - total flux cleaned = 0.00287224 Jy ! Component: 150 - total flux cleaned = 0.00231267 Jy ! Component: 200 - total flux cleaned = 0.00231139 Jy ! Total flux subtracted in 200 components = 0.00231139 Jy ! Clean residual min=-0.005408 max=0.008062 Jy/beam ! Clean residual mean=-0.000001 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 0.136352 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.136352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.159948Jy sigma=0.000768 ! Fit after self-cal, rms=1.160586Jy sigma=0.000756 ! Inverting map ! Added new window around map position (5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235241 Jy ! Component: 100 - total flux cleaned = 0.00234865 Jy ! Component: 150 - total flux cleaned = 0.00235456 Jy ! Component: 200 - total flux cleaned = 0.0026665 Jy ! Total flux subtracted in 200 components = 0.0026665 Jy ! Clean residual min=-0.004546 max=0.004647 Jy/beam ! Clean residual mean=-0.000001 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.139018 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.139018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.159486Jy sigma=0.000757 ! Fit after self-cal, rms=1.159468Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.159468Jy sigma=0.000756 ! Fit after self-cal, rms=2.698903Jy sigma=0.000713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=8.239 mas, bpa=-0.3604 degrees ! Estimated noise=597.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309499 Jy ! Component: 100 - total flux cleaned = 0.00191711 Jy ! Component: 150 - total flux cleaned = 0.00124012 Jy ! Component: 200 - total flux cleaned = 0.00108809 Jy ! Total flux subtracted in 200 components = 0.00108809 Jy ! Clean residual min=-0.004290 max=0.003763 Jy/beam ! Clean residual mean=-0.000005 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.140107 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.140107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.697767Jy sigma=0.000714 ! Fit after self-cal, rms=2.697753Jy sigma=0.000712 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210495 Jy ! Component: 100 - total flux cleaned = -8.75701e-05 Jy ! Component: 150 - total flux cleaned = 3.42873e-05 Jy ! Component: 200 - total flux cleaned = 0.000146108 Jy ! Total flux subtracted in 200 components = 0.000146108 Jy ! Clean residual min=-0.004187 max=0.003635 Jy/beam ! Clean residual mean=-0.000005 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.140253 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 83 components and 0.140253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.697315Jy sigma=0.000713 ! Fit after self-cal, rms=2.697297Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.697297Jy sigma=0.000712 ! Fit after self-cal, rms=0.879940Jy sigma=0.000694 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.391 mas, bmaj=8.235 mas, bpa=-0.6695 degrees ! Estimated noise=611.359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154348 Jy ! Component: 100 - total flux cleaned = 0.00221293 Jy ! Component: 150 - total flux cleaned = 0.00266197 Jy ! Component: 200 - total flux cleaned = 0.00285733 Jy ! Total flux subtracted in 200 components = 0.00285733 Jy ! Clean residual min=-0.003505 max=0.003321 Jy/beam ! Clean residual mean=-0.000005 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.14311 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.14311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.879006Jy sigma=0.000694 ! Fit after self-cal, rms=0.879012Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016077 Jy ! Component: 100 - total flux cleaned = -0.000162821 Jy ! Component: 150 - total flux cleaned = -8.9338e-05 Jy ! Component: 200 - total flux cleaned = -1.93294e-05 Jy ! Total flux subtracted in 200 components = -1.93294e-05 Jy ! Clean residual min=-0.003130 max=0.003084 Jy/beam ! Clean residual mean=-0.000005 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.143091 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.143091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.878591Jy sigma=0.000694 ! Fit after self-cal, rms=0.878592Jy sigma=0.000694 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.878592Jy sigma=0.000694 ! Fit after self-cal, rms=0.952510Jy sigma=0.000693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=13.5 mas, bpa=-2.654 degrees ! Estimated noise=751.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312331 Jy ! Component: 100 - total flux cleaned = 0.00340947 Jy ! Component: 150 - total flux cleaned = 0.00356776 Jy ! Component: 200 - total flux cleaned = 0.00350325 Jy ! Total flux subtracted in 200 components = 0.00350325 Jy ! Clean residual min=-0.003043 max=0.003028 Jy/beam ! Clean residual mean=-0.000010 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.146594 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 0.146594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952151Jy sigma=0.000693 ! Fit after self-cal, rms=0.952150Jy sigma=0.000693 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238104 Jy ! Component: 100 - total flux cleaned = 0.00011702 Jy ! Component: 150 - total flux cleaned = 6.51334e-06 Jy ! Component: 200 - total flux cleaned = -9.36286e-05 Jy ! Total flux subtracted in 200 components = -9.36286e-05 Jy ! Clean residual min=-0.002792 max=0.002865 Jy/beam ! Clean residual mean=-0.000010 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.1465 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 0.1465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.952038Jy sigma=0.000693 ! Fit after self-cal, rms=0.952038Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=8.259 mas, bpa=-0.7563 degrees ! Estimated noise=627.911 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 8.259 at -0.7563 degrees (North through East) ! Clean map min=-0.003723 max=0.13218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=6.961 mas, bpa=-0.1385 degrees ! Estimated noise=1045.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103356 Jy ! Component: 100 - total flux cleaned = 0.127801 Jy ! Component: 150 - total flux cleaned = 0.138356 Jy ! Component: 200 - total flux cleaned = 0.140013 Jy ! Total flux subtracted in 200 components = 0.140013 Jy ! Clean residual min=-0.005179 max=0.004321 Jy/beam ! Clean residual mean=-0.000002 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.140013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.140013 Jy ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=8.259 mas, bpa=-0.7563 degrees ! Estimated noise=627.911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255697 Jy ! Component: 100 - total flux cleaned = 0.00303908 Jy ! Component: 150 - total flux cleaned = 0.00332555 Jy ! Component: 200 - total flux cleaned = 0.00358566 Jy ! Total flux subtracted in 200 components = 0.00358566 Jy ! Clean residual min=-0.004356 max=0.003594 Jy/beam ! Clean residual mean=-0.000004 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.143599 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.143599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=13.5 mas, bpa=-2.654 degrees ! Estimated noise=751.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193117 Jy ! Component: 100 - total flux cleaned = 0.00239586 Jy ! Component: 150 - total flux cleaned = 0.00260418 Jy ! Component: 200 - total flux cleaned = 0.0026587 Jy ! Total flux subtracted in 200 components = 0.0026587 Jy ! Clean residual min=-0.002736 max=0.002912 Jy/beam ! Clean residual mean=-0.000009 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.146257 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.76395e-05 Jy ! Component: 100 - total flux cleaned = 2.93047e-06 Jy ! Component: 150 - total flux cleaned = -3.66966e-05 Jy ! Component: 200 - total flux cleaned = -3.57586e-05 Jy ! Total flux subtracted in 200 components = -3.57586e-05 Jy ! Clean residual min=-0.002652 max=0.002786 Jy/beam ! Clean residual mean=-0.000010 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.146222 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 0.146222 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=8.259 mas, bpa=-0.7563 degrees ! Estimated noise=627.911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.93979e-05 Jy ! Component: 100 - total flux cleaned = -0.00031927 Jy ! Component: 150 - total flux cleaned = -0.00022004 Jy ! Component: 200 - total flux cleaned = -0.000221649 Jy ! Total flux subtracted in 200 components = -0.000221649 Jy ! Clean residual min=-0.003541 max=0.002856 Jy/beam ! Clean residual mean=-0.000005 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.146 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.951735Jy sigma=0.000694 ! Fit after self-cal, rms=0.951734Jy sigma=0.000694 wmodel J2024+0027_S_2017_05_27_pus_map.mod ! Writing 79 model components to file: J2024+0027_S_2017_05_27_pus_map.mod wobs J2024+0027_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2024+0027_S_2017_05_27_pus_uvs.fits wwins J2024+0027_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J2024+0027_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151791 Jy ! Component: 100 - total flux cleaned = -0.0021586 Jy ! Component: 150 - total flux cleaned = -0.00296656 Jy ! Component: 200 - total flux cleaned = -0.00349803 Jy ! Component: 250 - total flux cleaned = -0.00396468 Jy ! Component: 300 - total flux cleaned = -0.00437337 Jy ! Component: 350 - total flux cleaned = -0.00481617 Jy ! Component: 400 - total flux cleaned = -0.00529128 Jy ! Component: 450 - total flux cleaned = -0.00567189 Jy ! Component: 500 - total flux cleaned = -0.00608667 Jy ! Component: 550 - total flux cleaned = -0.0065354 Jy ! Component: 600 - total flux cleaned = -0.00681637 Jy ! Component: 650 - total flux cleaned = -0.00709284 Jy ! Component: 700 - total flux cleaned = -0.00736588 Jy ! Component: 750 - total flux cleaned = -0.00767408 Jy ! Component: 800 - total flux cleaned = -0.00790196 Jy ! Component: 850 - total flux cleaned = -0.00790172 Jy ! Component: 900 - total flux cleaned = -0.00808744 Jy ! Component: 950 - total flux cleaned = -0.0082351 Jy ! Component: 1000 - total flux cleaned = -0.00838133 Jy ! Component: 1050 - total flux cleaned = -0.0084534 Jy ! Component: 1100 - total flux cleaned = -0.00863289 Jy ! Component: 1150 - total flux cleaned = -0.0087392 Jy ! Component: 1200 - total flux cleaned = -0.00884509 Jy ! Component: 1250 - total flux cleaned = -0.0089497 Jy ! Component: 1300 - total flux cleaned = -0.00915783 Jy ! Component: 1350 - total flux cleaned = -0.00922662 Jy ! Component: 1400 - total flux cleaned = -0.00946619 Jy ! Component: 1450 - total flux cleaned = -0.00953424 Jy ! Component: 1500 - total flux cleaned = -0.00970298 Jy ! Component: 1550 - total flux cleaned = -0.00980313 Jy ! Component: 1600 - total flux cleaned = -0.00996929 Jy ! Component: 1650 - total flux cleaned = -0.0101012 Jy ! Component: 1700 - total flux cleaned = -0.0101341 Jy ! Component: 1750 - total flux cleaned = -0.0102646 Jy ! Component: 1800 - total flux cleaned = -0.0103294 Jy ! Component: 1850 - total flux cleaned = -0.0104584 Jy ! Component: 1900 - total flux cleaned = -0.0106184 Jy ! Component: 1950 - total flux cleaned = -0.0106504 Jy ! Component: 2000 - total flux cleaned = -0.010777 Jy ! Component: 2050 - total flux cleaned = -0.0108086 Jy ! Component: 2100 - total flux cleaned = -0.0109653 Jy ! Component: 2150 - total flux cleaned = -0.0109962 Jy ! Component: 2200 - total flux cleaned = -0.0110273 Jy ! Component: 2250 - total flux cleaned = -0.0111201 Jy ! Component: 2300 - total flux cleaned = -0.0112124 Jy ! Component: 2350 - total flux cleaned = -0.0113347 Jy ! Component: 2400 - total flux cleaned = -0.0113346 Jy ! Component: 2450 - total flux cleaned = -0.0113951 Jy ! Component: 2500 - total flux cleaned = -0.0115459 Jy ! Component: 2550 - total flux cleaned = -0.011606 Jy ! Component: 2600 - total flux cleaned = -0.011546 Jy ! Component: 2650 - total flux cleaned = -0.011665 Jy ! Component: 2700 - total flux cleaned = -0.0116948 Jy ! Component: 2750 - total flux cleaned = -0.0118128 Jy ! Component: 2800 - total flux cleaned = -0.0118128 Jy ! Component: 2850 - total flux cleaned = -0.0119589 Jy ! Component: 2900 - total flux cleaned = -0.0119588 Jy ! Component: 2950 - total flux cleaned = -0.0120459 Jy ! Component: 3000 - total flux cleaned = -0.0120748 Jy ! Component: 3050 - total flux cleaned = -0.0121611 Jy ! Component: 3100 - total flux cleaned = -0.0123044 Jy ! Component: 3150 - total flux cleaned = -0.0122473 Jy ! Component: 3200 - total flux cleaned = -0.0123612 Jy ! Component: 3250 - total flux cleaned = -0.0124747 Jy ! Component: 3300 - total flux cleaned = -0.0125593 Jy ! Component: 3350 - total flux cleaned = -0.012475 Jy ! Component: 3400 - total flux cleaned = -0.0125311 Jy ! Component: 3450 - total flux cleaned = -0.0125312 Jy ! Component: 3500 - total flux cleaned = -0.0126149 Jy ! Component: 3550 - total flux cleaned = -0.0126149 Jy ! Component: 3600 - total flux cleaned = -0.0126704 Jy ! Component: 3650 - total flux cleaned = -0.0128359 Jy ! Component: 3700 - total flux cleaned = -0.0127809 Jy ! Component: 3750 - total flux cleaned = -0.012863 Jy ! Component: 3800 - total flux cleaned = -0.0127811 Jy ! Component: 3850 - total flux cleaned = -0.012863 Jy ! Component: 3900 - total flux cleaned = -0.0129714 Jy ! Component: 3950 - total flux cleaned = -0.0129715 Jy ! Component: 4000 - total flux cleaned = -0.0130524 Jy ! Component: 4050 - total flux cleaned = -0.0131061 Jy ! Total flux subtracted in 4096 components = -0.0132133 Jy ! Clean residual min=-0.001710 max=0.001503 Jy/beam ! Clean residual mean=-0.000005 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.132787 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 359 components and 0.132787 Jy ![Exited script file: muppet] wmap "J2024+0027_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 8.259 at -0.7563 degrees (North through East) ! Clean map min=-0.0032177 max=0.13456 Jy/beam ! Writing clean map to FITS file: J2024+0027_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134561 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000508775 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.1343 1.1343 2.2686 4.5372 9.0744 18.1488 36.2976 72.5952 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.387 x 8.259 at -0.7563 degrees (North through East) ! Clean map min=-0.0032177 max=0.13456 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2024+0027_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:34 2019