! Started logfile: J2023-0123_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:21:57 2019 obs J2023-0123_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2023-0123_S_2017_01_16_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.774828 visibilities/baseline/integration-bin. ! Found source: J2023-0123 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2023-0123_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.942396Jy sigma=0.006946 ! Fit after self-cal, rms=0.924705Jy sigma=0.006870 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=9.163 mas, bpa=17.42 degrees ! Estimated noise=1163.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673711 Jy ! Component: 100 - total flux cleaned = 0.0821171 Jy ! Total flux subtracted in 100 components = 0.0821171 Jy ! Clean residual min=-0.003718 max=0.004353 Jy/beam ! Clean residual mean=0.000002 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.0821171 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0821171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156931Jy sigma=0.000661 ! Fit after self-cal, rms=0.156834Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.17 mas, bmaj=10.19 mas, bpa=16.61 degrees ! Estimated noise=807.154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360157 Jy ! Component: 100 - total flux cleaned = 0.00542683 Jy ! Component: 150 - total flux cleaned = 0.00645324 Jy ! Component: 200 - total flux cleaned = 0.00654319 Jy ! Total flux subtracted in 200 components = 0.00654319 Jy ! Clean residual min=-0.002540 max=0.002384 Jy/beam ! Clean residual mean=-0.000008 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.0886603 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.0886603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156668Jy sigma=0.000660 ! Fit after self-cal, rms=0.156690Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.98 KP 1.01 ! LA 1.06 MK 1.00* NL 0.87 OV 0.96 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.98 KP 0.99 ! LA 0.97 MK 1.00* NL 1.02 OV 1.05 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.04 HN 1.01 KP 1.06 ! LA 1.05 MK 1.00* NL 1.00 OV 0.93 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.98 KP 1.08 ! LA 0.91 MK 1.00* NL 1.00* OV 0.98 ! PT 1.04 SC 0.92 ! ! ! Fit before self-cal, rms=0.156690Jy sigma=0.000660 ! Fit after self-cal, rms=0.152369Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=10.17 mas, bpa=16.31 degrees ! Estimated noise=811.517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.86616e-05 Jy ! Component: 100 - total flux cleaned = 0.00014238 Jy ! Component: 150 - total flux cleaned = 0.000116121 Jy ! Component: 200 - total flux cleaned = 0.000116503 Jy ! Total flux subtracted in 200 components = 0.000116503 Jy ! Clean residual min=-0.002114 max=0.002083 Jy/beam ! Clean residual mean=-0.000007 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0887768 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0887768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152331Jy sigma=0.000659 ! Fit after self-cal, rms=0.152304Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152304Jy sigma=0.000659 ! Fit after self-cal, rms=0.121996Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=10.16 mas, bpa=16.31 degrees ! Estimated noise=814.814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223025 Jy ! Component: 100 - total flux cleaned = 0.000370358 Jy ! Component: 150 - total flux cleaned = 0.000409638 Jy ! Component: 200 - total flux cleaned = 0.000426152 Jy ! Total flux subtracted in 200 components = 0.000426152 Jy ! Clean residual min=-0.001820 max=0.001821 Jy/beam ! Clean residual mean=-0.000001 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0892029 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0892029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121972Jy sigma=0.000657 ! Fit after self-cal, rms=0.121795Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.40727e-05 Jy ! Component: 100 - total flux cleaned = -6.56031e-05 Jy ! Component: 150 - total flux cleaned = -5.1964e-05 Jy ! Component: 200 - total flux cleaned = -7.66195e-05 Jy ! Total flux subtracted in 200 components = -7.66195e-05 Jy ! Clean residual min=-0.001849 max=0.001835 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0891263 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0891263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121784Jy sigma=0.000657 ! Fit after self-cal, rms=0.121784Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121784Jy sigma=0.000657 ! Fit after self-cal, rms=0.110200Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.177 mas, bmaj=10.15 mas, bpa=16.24 degrees ! Estimated noise=815.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000115591 Jy ! Component: 100 - total flux cleaned = -0.000130214 Jy ! Component: 150 - total flux cleaned = -0.000129453 Jy ! Component: 200 - total flux cleaned = -0.000140474 Jy ! Total flux subtracted in 200 components = -0.000140474 Jy ! Clean residual min=-0.001835 max=0.001807 Jy/beam ! Clean residual mean=-0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0889858 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0889858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110191Jy sigma=0.000656 ! Fit after self-cal, rms=0.110057Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.21694e-05 Jy ! Component: 100 - total flux cleaned = 9.0897e-06 Jy ! Component: 150 - total flux cleaned = -1.26369e-05 Jy ! Component: 200 - total flux cleaned = -2.26169e-05 Jy ! Total flux subtracted in 200 components = -2.26169e-05 Jy ! Clean residual min=-0.001844 max=0.001785 Jy/beam ! Clean residual mean=-0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0889632 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0889632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110050Jy sigma=0.000656 ! Fit after self-cal, rms=0.110051Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110051Jy sigma=0.000656 ! Fit after self-cal, rms=0.109425Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=12.78 mas, bpa=6.523 degrees ! Estimated noise=952.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000411822 Jy ! Component: 100 - total flux cleaned = -0.000486253 Jy ! Component: 150 - total flux cleaned = -0.000550198 Jy ! Component: 200 - total flux cleaned = -0.000595235 Jy ! Total flux subtracted in 200 components = -0.000595235 Jy ! Clean residual min=-0.001717 max=0.001853 Jy/beam ! Clean residual mean=0.000001 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0883679 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.0883679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109426Jy sigma=0.000656 ! Fit after self-cal, rms=0.109399Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.44732e-05 Jy ! Component: 100 - total flux cleaned = -0.000135002 Jy ! Component: 150 - total flux cleaned = -0.000171038 Jy ! Component: 200 - total flux cleaned = -0.000203398 Jy ! Total flux subtracted in 200 components = -0.000203398 Jy ! Clean residual min=-0.001725 max=0.001855 Jy/beam ! Clean residual mean=0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0881645 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0881645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109399Jy sigma=0.000656 ! Fit after self-cal, rms=0.109399Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.178 mas, bmaj=10.15 mas, bpa=16.18 degrees ! Estimated noise=816.472 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.178 x 10.15 at 16.18 degrees (North through East) ! Clean map min=-0.0017946 max=0.086564 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=9.138 mas, bpa=16.91 degrees ! Estimated noise=1162.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0675969 Jy ! Component: 100 - total flux cleaned = 0.0824812 Jy ! Component: 150 - total flux cleaned = 0.0847542 Jy ! Component: 200 - total flux cleaned = 0.085723 Jy ! Total flux subtracted in 200 components = 0.085723 Jy ! Clean residual min=-0.003083 max=0.002638 Jy/beam ! Clean residual mean=0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.085723 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.085723 Jy ! Inverting map and beam ! Estimated beam: bmin=4.178 mas, bmaj=10.15 mas, bpa=16.18 degrees ! Estimated noise=816.472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175605 Jy ! Component: 100 - total flux cleaned = 0.002277 Jy ! Component: 150 - total flux cleaned = 0.00249302 Jy ! Component: 200 - total flux cleaned = 0.00263947 Jy ! Total flux subtracted in 200 components = 0.00263947 Jy ! Clean residual min=-0.001890 max=0.001831 Jy/beam ! Clean residual mean=-0.000000 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0883625 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.0883625 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=12.78 mas, bpa=6.523 degrees ! Estimated noise=952.898 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270344 Jy ! Component: 100 - total flux cleaned = -0.00024792 Jy ! Component: 150 - total flux cleaned = -0.000257161 Jy ! Component: 200 - total flux cleaned = -0.000282642 Jy ! Total flux subtracted in 200 components = -0.000282642 Jy ! Clean residual min=-0.001708 max=0.001849 Jy/beam ! Clean residual mean=0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.0880798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57238e-05 Jy ! Component: 100 - total flux cleaned = -3.76113e-05 Jy ! Component: 150 - total flux cleaned = -5.8255e-05 Jy ! Component: 200 - total flux cleaned = -7.10705e-05 Jy ! Total flux subtracted in 200 components = -7.10705e-05 Jy ! Clean residual min=-0.001716 max=0.001851 Jy/beam ! Clean residual mean=0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0880088 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.0880088 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.178 mas, bmaj=10.15 mas, bpa=16.18 degrees ! Estimated noise=816.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221187 Jy ! Component: 100 - total flux cleaned = 0.000293543 Jy ! Component: 150 - total flux cleaned = 0.000356233 Jy ! Component: 200 - total flux cleaned = 0.00041374 Jy ! Total flux subtracted in 200 components = 0.00041374 Jy ! Clean residual min=-0.001853 max=0.001838 Jy/beam ! Clean residual mean=-0.000000 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0884225 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0884225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109418Jy sigma=0.000656 ! Fit after self-cal, rms=0.109405Jy sigma=0.000656 wmodel J2023-0123_S_2017_01_16_pus_map.mod ! Writing 61 model components to file: J2023-0123_S_2017_01_16_pus_map.mod wobs J2023-0123_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2023-0123_S_2017_01_16_pus_uvs.fits wwins J2023-0123_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2023-0123_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.68874e-05 Jy ! Component: 100 - total flux cleaned = 0.000128535 Jy ! Component: 150 - total flux cleaned = 9.85086e-05 Jy ! Component: 200 - total flux cleaned = 0.000216469 Jy ! Component: 250 - total flux cleaned = 0.000159244 Jy ! Component: 300 - total flux cleaned = 0.000131877 Jy ! Component: 350 - total flux cleaned = 0.00018575 Jy ! Component: 400 - total flux cleaned = 0.000185019 Jy ! Component: 450 - total flux cleaned = 0.000211112 Jy ! Component: 500 - total flux cleaned = 0.000211113 Jy ! Component: 550 - total flux cleaned = 0.00028739 Jy ! Component: 600 - total flux cleaned = 0.000361794 Jy ! Component: 650 - total flux cleaned = 0.000337818 Jy ! Component: 700 - total flux cleaned = 0.000433868 Jy ! Component: 750 - total flux cleaned = 0.000527889 Jy ! Component: 800 - total flux cleaned = 0.000550871 Jy ! Component: 850 - total flux cleaned = 0.000573407 Jy ! Component: 900 - total flux cleaned = 0.000528216 Jy ! Component: 950 - total flux cleaned = 0.000640264 Jy ! Component: 1000 - total flux cleaned = 0.00068417 Jy ! Component: 1050 - total flux cleaned = 0.00068423 Jy ! Component: 1100 - total flux cleaned = 0.000749048 Jy ! Component: 1150 - total flux cleaned = 0.000791557 Jy ! Component: 1200 - total flux cleaned = 0.000770654 Jy ! Component: 1250 - total flux cleaned = 0.0008954 Jy ! Component: 1300 - total flux cleaned = 0.000895684 Jy ! Component: 1350 - total flux cleaned = 0.000976861 Jy ! Component: 1400 - total flux cleaned = 0.00099696 Jy ! Component: 1450 - total flux cleaned = 0.000997164 Jy ! Component: 1500 - total flux cleaned = 0.0010368 Jy ! Component: 1550 - total flux cleaned = 0.00101721 Jy ! Component: 1600 - total flux cleaned = 0.00109481 Jy ! Component: 1650 - total flux cleaned = 0.00119071 Jy ! Component: 1700 - total flux cleaned = 0.00115229 Jy ! Component: 1750 - total flux cleaned = 0.00117108 Jy ! Component: 1800 - total flux cleaned = 0.0012083 Jy ! Component: 1850 - total flux cleaned = 0.0011894 Jy ! Component: 1900 - total flux cleaned = 0.00117078 Jy ! Component: 1950 - total flux cleaned = 0.00122534 Jy ! Component: 2000 - total flux cleaned = 0.00118935 Jy ! Component: 2050 - total flux cleaned = 0.00129677 Jy ! Component: 2100 - total flux cleaned = 0.0012966 Jy ! Component: 2150 - total flux cleaned = 0.00127892 Jy ! Component: 2200 - total flux cleaned = 0.00127898 Jy ! Component: 2250 - total flux cleaned = 0.00127917 Jy ! Component: 2300 - total flux cleaned = 0.00126206 Jy ! Component: 2350 - total flux cleaned = 0.00124533 Jy ! Component: 2400 - total flux cleaned = 0.0012794 Jy ! Component: 2450 - total flux cleaned = 0.00134684 Jy ! Component: 2500 - total flux cleaned = 0.00136354 Jy ! Component: 2550 - total flux cleaned = 0.00136322 Jy ! Component: 2600 - total flux cleaned = 0.00134687 Jy ! Component: 2650 - total flux cleaned = 0.00134696 Jy ! Component: 2700 - total flux cleaned = 0.00139562 Jy ! Component: 2750 - total flux cleaned = 0.00141182 Jy ! Component: 2800 - total flux cleaned = 0.00137984 Jy ! Component: 2850 - total flux cleaned = 0.00144349 Jy ! Component: 2900 - total flux cleaned = 0.00145921 Jy ! Component: 2950 - total flux cleaned = 0.00145928 Jy ! Component: 3000 - total flux cleaned = 0.00144352 Jy ! Component: 3050 - total flux cleaned = 0.00149008 Jy ! Component: 3100 - total flux cleaned = 0.00144374 Jy ! Component: 3150 - total flux cleaned = 0.00148979 Jy ! Component: 3200 - total flux cleaned = 0.00142879 Jy ! Component: 3250 - total flux cleaned = 0.00148931 Jy ! Component: 3300 - total flux cleaned = 0.00147436 Jy ! Component: 3350 - total flux cleaned = 0.00154891 Jy ! Component: 3400 - total flux cleaned = 0.00148959 Jy ! Component: 3450 - total flux cleaned = 0.00150426 Jy ! Component: 3500 - total flux cleaned = 0.00151899 Jy ! Component: 3550 - total flux cleaned = 0.00147522 Jy ! Component: 3600 - total flux cleaned = 0.00143178 Jy ! Component: 3650 - total flux cleaned = 0.00144627 Jy ! Component: 3700 - total flux cleaned = 0.00137459 Jy ! Component: 3750 - total flux cleaned = 0.00137463 Jy ! Component: 3800 - total flux cleaned = 0.00131813 Jy ! Component: 3850 - total flux cleaned = 0.00133233 Jy ! Component: 3900 - total flux cleaned = 0.0013042 Jy ! Component: 3950 - total flux cleaned = 0.00135984 Jy ! Component: 4000 - total flux cleaned = 0.00129061 Jy ! Component: 4050 - total flux cleaned = 0.00129063 Jy ! Total flux subtracted in 4096 components = 0.00127687 Jy ! Clean residual min=-0.000775 max=0.000826 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0896994 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 363 components and 0.0896994 Jy ![Exited script file: muppet] wmap "J2023-0123_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.178 x 10.15 at 16.18 degrees (North through East) ! Clean map min=-0.0015162 max=0.086481 Jy/beam ! Writing clean map to FITS file: J2023-0123_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0864814 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266499 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.924474 0.924474 1.84895 3.69789 7.39579 14.7916 29.5832 59.1663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.178 x 10.15 at 16.18 degrees (North through East) ! Clean map min=-0.0015162 max=0.086481 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2023-0123_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:03 2019