! Started logfile: J2022-4038_S_2017_10_21_pus_uvs.log on Sat May 11 21:05:41 2019 obs J2022-4038_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2022-4038_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.574713 visibilities/baseline/integration-bin. ! Found source: J2022-4038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9600 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2022-4038_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 619 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.863454Jy sigma=0.005645 ! Fit after self-cal, rms=0.819509Jy sigma=0.005358 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=16.14 mas, bpa=-26.22 degrees ! Estimated noise=1962.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.127024 Jy ! Component: 100 - total flux cleaned = 0.17266 Jy ! Total flux subtracted in 100 components = 0.17266 Jy ! Clean residual min=-0.013584 max=0.023522 Jy/beam ! Clean residual mean=-0.000503 rms=0.004739 Jy/beam ! Combined flux in latest and established models = 0.17266 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.17266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135268Jy sigma=0.000825 ! Fit after self-cal, rms=0.135098Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=19.53 mas, bpa=-25.86 degrees ! Estimated noise=1329.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.041769 Jy ! Component: 100 - total flux cleaned = 0.0636889 Jy ! Component: 150 - total flux cleaned = 0.0765399 Jy ! Component: 200 - total flux cleaned = 0.0842604 Jy ! Total flux subtracted in 200 components = 0.0842604 Jy ! Clean residual min=-0.006877 max=0.007659 Jy/beam ! Clean residual mean=-0.000166 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.25692 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 115 components and 0.25692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121573Jy sigma=0.000734 ! Fit after self-cal, rms=0.121433Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.08 ! LA 0.99 MK 1.02 NL 1.00* OV 1.00 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.00* KP 1.03 ! LA 0.97 MK 1.02 NL 1.15 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.00* KP 1.04 ! LA 0.75 MK 1.03 NL 1.28 OV 0.93 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.00* KP 1.00* ! LA 1.02 MK 1.02 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Fit before self-cal, rms=0.121433Jy sigma=0.000733 ! Fit after self-cal, rms=0.120361Jy sigma=0.000720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=19.85 mas, bpa=-26.18 degrees ! Estimated noise=1342.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305447 Jy ! Component: 100 - total flux cleaned = -0.000388095 Jy ! Component: 150 - total flux cleaned = -0.000316971 Jy ! Component: 200 - total flux cleaned = -0.000318147 Jy ! Total flux subtracted in 200 components = -0.000318147 Jy ! Clean residual min=-0.005162 max=0.004600 Jy/beam ! Clean residual mean=0.000009 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.256602 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.256602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120242Jy sigma=0.000720 ! Fit after self-cal, rms=0.120302Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120302Jy sigma=0.000719 ! Fit after self-cal, rms=0.120723Jy sigma=0.000719 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=19.85 mas, bpa=-26.2 degrees ! Estimated noise=1340.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000658452 Jy ! Component: 100 - total flux cleaned = -0.000658654 Jy ! Component: 150 - total flux cleaned = -0.000603304 Jy ! Component: 200 - total flux cleaned = -0.000606403 Jy ! Total flux subtracted in 200 components = -0.000606403 Jy ! Clean residual min=-0.005177 max=0.004370 Jy/beam ! Clean residual mean=0.000009 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.255996 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.255996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120657Jy sigma=0.000719 ! Fit after self-cal, rms=0.120660Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150019 Jy ! Component: 100 - total flux cleaned = -0.000150423 Jy ! Component: 150 - total flux cleaned = -0.000108461 Jy ! Component: 200 - total flux cleaned = -0.000108072 Jy ! Total flux subtracted in 200 components = -0.000108072 Jy ! Clean residual min=-0.005178 max=0.004199 Jy/beam ! Clean residual mean=0.000008 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.255888 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 0.255888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120623Jy sigma=0.000719 ! Fit after self-cal, rms=0.120611Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120611Jy sigma=0.000719 ! Fit after self-cal, rms=0.121796Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=19.95 mas, bpa=-26.25 degrees ! Estimated noise=1342.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000415687 Jy ! Component: 100 - total flux cleaned = -0.000415844 Jy ! Component: 150 - total flux cleaned = -0.000454862 Jy ! Component: 200 - total flux cleaned = -0.000490813 Jy ! Total flux subtracted in 200 components = -0.000490813 Jy ! Clean residual min=-0.004596 max=0.004247 Jy/beam ! Clean residual mean=0.000020 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.255397 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 161 components and 0.255397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121761Jy sigma=0.000717 ! Fit after self-cal, rms=0.121798Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.93595e-05 Jy ! Component: 100 - total flux cleaned = -8.48218e-05 Jy ! Component: 150 - total flux cleaned = -0.00011865 Jy ! Component: 200 - total flux cleaned = -0.000181159 Jy ! Total flux subtracted in 200 components = -0.000181159 Jy ! Clean residual min=-0.004592 max=0.004204 Jy/beam ! Clean residual mean=0.000019 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.255216 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 166 components and 0.255216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121778Jy sigma=0.000717 ! Fit after self-cal, rms=0.121769Jy sigma=0.000717 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121769Jy sigma=0.000717 ! Fit after self-cal, rms=0.122108Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.74 mas, bmaj=38.8 mas, bpa=-12.27 degrees ! Estimated noise=1607.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398849 Jy ! Component: 100 - total flux cleaned = -0.000397195 Jy ! Component: 150 - total flux cleaned = -0.000425222 Jy ! Component: 200 - total flux cleaned = -0.000426632 Jy ! Total flux subtracted in 200 components = -0.000426632 Jy ! Clean residual min=-0.003955 max=0.004939 Jy/beam ! Clean residual mean=0.000035 rms=0.001487 Jy/beam ! Combined flux in latest and established models = 0.254789 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 174 components and 0.254789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122094Jy sigma=0.000716 ! Fit after self-cal, rms=0.122094Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92345e-05 Jy ! Component: 100 - total flux cleaned = 4.66503e-06 Jy ! Component: 150 - total flux cleaned = 5.84233e-06 Jy ! Component: 200 - total flux cleaned = 6.85691e-06 Jy ! Total flux subtracted in 200 components = 6.85691e-06 Jy ! Clean residual min=-0.003882 max=0.004878 Jy/beam ! Clean residual mean=0.000035 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.254796 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 181 components and 0.254796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122088Jy sigma=0.000716 ! Fit after self-cal, rms=0.122082Jy sigma=0.000716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=20 mas, bpa=-26.22 degrees ! Estimated noise=1344.64 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 20 at -26.22 degrees (North through East) ! Clean map min=-0.0046716 max=0.16968 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=16.48 mas, bpa=-26.62 degrees ! Estimated noise=2108.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129492 Jy ! Component: 100 - total flux cleaned = 0.176271 Jy ! Component: 150 - total flux cleaned = 0.203507 Jy ! Component: 200 - total flux cleaned = 0.221053 Jy ! Total flux subtracted in 200 components = 0.221053 Jy ! Clean residual min=-0.008523 max=0.009920 Jy/beam ! Clean residual mean=-0.000161 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 0.221053 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.221053 Jy ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=20 mas, bpa=-26.22 degrees ! Estimated noise=1344.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162018 Jy ! Component: 100 - total flux cleaned = 0.0245488 Jy ! Component: 150 - total flux cleaned = 0.0291873 Jy ! Component: 200 - total flux cleaned = 0.0318126 Jy ! Total flux subtracted in 200 components = 0.0318126 Jy ! Clean residual min=-0.004645 max=0.004692 Jy/beam ! Clean residual mean=0.000007 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.252865 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 109 components and 0.252865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.74 mas, bmaj=38.8 mas, bpa=-12.27 degrees ! Estimated noise=1607.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169571 Jy ! Component: 100 - total flux cleaned = 0.00182839 Jy ! Component: 150 - total flux cleaned = 0.00195359 Jy ! Component: 200 - total flux cleaned = 0.00207274 Jy ! Total flux subtracted in 200 components = 0.00207274 Jy ! Clean residual min=-0.004077 max=0.005455 Jy/beam ! Clean residual mean=0.000035 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.254938 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148399 Jy ! Component: 100 - total flux cleaned = 0.000218842 Jy ! Component: 150 - total flux cleaned = 0.000320556 Jy ! Component: 200 - total flux cleaned = 0.000418087 Jy ! Total flux subtracted in 200 components = 0.000418087 Jy ! Clean residual min=-0.004012 max=0.005176 Jy/beam ! Clean residual mean=0.000040 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 0.255356 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 138 components and 0.255356 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.439 mas, bmaj=20 mas, bpa=-26.22 degrees ! Estimated noise=1344.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.41763e-05 Jy ! Component: 100 - total flux cleaned = 6.39805e-05 Jy ! Component: 150 - total flux cleaned = 6.54432e-05 Jy ! Component: 200 - total flux cleaned = 6.62137e-05 Jy ! Total flux subtracted in 200 components = 6.62137e-05 Jy ! Clean residual min=-0.004347 max=0.004048 Jy/beam ! Clean residual mean=0.000024 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.255423 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 153 components and 0.255423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122098Jy sigma=0.000716 ! Fit after self-cal, rms=0.122061Jy sigma=0.000716 wmodel J2022-4038_S_2017_10_21_pus_map.mod ! Writing 153 model components to file: J2022-4038_S_2017_10_21_pus_map.mod wobs J2022-4038_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2022-4038_S_2017_10_21_pus_uvs.fits wwins J2022-4038_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J2022-4038_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000799531 Jy ! Component: 100 - total flux cleaned = -0.000938298 Jy ! Component: 150 - total flux cleaned = -0.000938223 Jy ! Component: 200 - total flux cleaned = -0.000879226 Jy ! Component: 250 - total flux cleaned = -0.000490834 Jy ! Component: 300 - total flux cleaned = -7.01558e-05 Jy ! Component: 350 - total flux cleaned = 0.000480286 Jy ! Component: 400 - total flux cleaned = 0.00105449 Jy ! Component: 450 - total flux cleaned = 0.00160539 Jy ! Component: 500 - total flux cleaned = 0.00209042 Jy ! Component: 550 - total flux cleaned = 0.00238823 Jy ! Component: 600 - total flux cleaned = 0.00275649 Jy ! Component: 650 - total flux cleaned = 0.00314989 Jy ! Component: 700 - total flux cleaned = 0.00326405 Jy ! Component: 750 - total flux cleaned = 0.00348599 Jy ! Component: 800 - total flux cleaned = 0.00355726 Jy ! Component: 850 - total flux cleaned = 0.00366387 Jy ! Component: 900 - total flux cleaned = 0.0037675 Jy ! Component: 950 - total flux cleaned = 0.00403218 Jy ! Component: 1000 - total flux cleaned = 0.00409569 Jy ! Component: 1050 - total flux cleaned = 0.00422089 Jy ! Component: 1100 - total flux cleaned = 0.00437458 Jy ! Component: 1150 - total flux cleaned = 0.00455439 Jy ! Component: 1200 - total flux cleaned = 0.00464188 Jy ! Component: 1250 - total flux cleaned = 0.00478397 Jy ! Component: 1300 - total flux cleaned = 0.00495072 Jy ! Component: 1350 - total flux cleaned = 0.00508726 Jy ! Component: 1400 - total flux cleaned = 0.00527415 Jy ! Component: 1450 - total flux cleaned = 0.00548278 Jy ! Component: 1500 - total flux cleaned = 0.00553377 Jy ! Component: 1550 - total flux cleaned = 0.00553362 Jy ! Component: 1600 - total flux cleaned = 0.00555828 Jy ! Component: 1650 - total flux cleaned = 0.00553423 Jy ! Component: 1700 - total flux cleaned = 0.00553395 Jy ! Component: 1750 - total flux cleaned = 0.00546248 Jy ! Component: 1800 - total flux cleaned = 0.00534582 Jy ! Component: 1850 - total flux cleaned = 0.00527698 Jy ! Component: 1900 - total flux cleaned = 0.00514043 Jy ! Component: 1950 - total flux cleaned = 0.0050286 Jy ! Component: 2000 - total flux cleaned = 0.00491749 Jy ! Component: 2050 - total flux cleaned = 0.00474177 Jy ! Component: 2100 - total flux cleaned = 0.00461147 Jy ! Component: 2150 - total flux cleaned = 0.00446097 Jy ! Component: 2200 - total flux cleaned = 0.00431195 Jy ! Component: 2250 - total flux cleaned = 0.00416441 Jy ! Component: 2300 - total flux cleaned = 0.00395578 Jy ! Component: 2350 - total flux cleaned = 0.00385263 Jy ! Component: 2400 - total flux cleaned = 0.00372971 Jy ! Component: 2450 - total flux cleaned = 0.00360775 Jy ! Component: 2500 - total flux cleaned = 0.00344662 Jy ! Component: 2550 - total flux cleaned = 0.00328702 Jy ! Component: 2600 - total flux cleaned = 0.00316832 Jy ! Component: 2650 - total flux cleaned = 0.00307009 Jy ! Component: 2700 - total flux cleaned = 0.00291394 Jy ! Component: 2750 - total flux cleaned = 0.00279775 Jy ! Component: 2800 - total flux cleaned = 0.00258665 Jy ! Component: 2850 - total flux cleaned = 0.00247251 Jy ! Component: 2900 - total flux cleaned = 0.00235914 Jy ! Component: 2950 - total flux cleaned = 0.00222777 Jy ! Component: 3000 - total flux cleaned = 0.00209728 Jy ! Component: 3050 - total flux cleaned = 0.00198625 Jy ! Component: 3100 - total flux cleaned = 0.00183933 Jy ! Component: 3150 - total flux cleaned = 0.00171162 Jy ! Component: 3200 - total flux cleaned = 0.00163902 Jy ! Component: 3250 - total flux cleaned = 0.00151301 Jy ! Component: 3300 - total flux cleaned = 0.00135216 Jy ! Component: 3350 - total flux cleaned = 0.00126349 Jy ! Component: 3400 - total flux cleaned = 0.00117511 Jy ! Component: 3450 - total flux cleaned = 0.0010173 Jy ! Component: 3500 - total flux cleaned = 0.000912854 Jy ! Component: 3550 - total flux cleaned = 0.000791799 Jy ! Component: 3600 - total flux cleaned = 0.000722947 Jy ! Component: 3650 - total flux cleaned = 0.000620211 Jy ! Component: 3700 - total flux cleaned = 0.00048395 Jy ! Component: 3750 - total flux cleaned = 0.000348513 Jy ! Component: 3800 - total flux cleaned = 0.000314785 Jy ! Component: 3850 - total flux cleaned = 0.00013017 Jy ! Component: 3900 - total flux cleaned = 8.00188e-05 Jy ! Component: 3950 - total flux cleaned = -5.31456e-05 Jy ! Component: 4000 - total flux cleaned = -0.000136005 Jy ! Component: 4050 - total flux cleaned = -0.000284427 Jy ! Total flux subtracted in 4096 components = -0.000350025 Jy ! Clean residual min=-0.000916 max=0.000850 Jy/beam ! Clean residual mean=0.000001 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.255073 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 421 components and 0.255073 Jy ![Exited script file: muppet] wmap "J2022-4038_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 20 at -26.22 degrees (North through East) ! Clean map min=-0.0031398 max=0.17305 Jy/beam ! Writing clean map to FITS file: J2022-4038_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.173049 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000306558 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.531452 0.531452 1.0629 2.12581 4.25162 8.50323 17.0065 34.0129 68.0258 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.173 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.439 x 20 at -26.22 degrees (North through East) ! Clean map min=-0.0031398 max=0.17305 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2022-4038_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:05:46 2019