! Started logfile: J2022-4038_S_2017_08_05_pus_uvs.log on Thu May 9 19:37:53 2019 obs J2022-4038_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2022-4038_S_2017_08_05_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.456232 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2022-4038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 9444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2022-4038_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 470 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 823 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878495Jy sigma=0.005657 ! Fit after self-cal, rms=0.836195Jy sigma=0.005389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.22 mas, bmaj=6.241 mas, bpa=-4.048 degrees ! Estimated noise=2776.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120898 Jy ! Component: 100 - total flux cleaned = 0.156365 Jy ! Total flux subtracted in 100 components = 0.156365 Jy ! Clean residual min=-0.014209 max=0.024477 Jy/beam ! Clean residual mean=-0.000121 rms=0.004503 Jy/beam ! Combined flux in latest and established models = 0.156365 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.156365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114921Jy sigma=0.000724 ! Fit after self-cal, rms=0.114869Jy sigma=0.000723 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=7.184 mas, bpa=-2.819 degrees ! Estimated noise=1345.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341281 Jy ! Component: 100 - total flux cleaned = 0.052102 Jy ! Component: 150 - total flux cleaned = 0.0627659 Jy ! Component: 200 - total flux cleaned = 0.069252 Jy ! Total flux subtracted in 200 components = 0.069252 Jy ! Clean residual min=-0.006698 max=0.009383 Jy/beam ! Clean residual mean=-0.000025 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 0.225617 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.225617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104575Jy sigma=0.000656 ! Fit after self-cal, rms=0.104112Jy sigma=0.000652 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.99 ! LA 0.96 MK 0.98 NL 1.00* OV 1.07 ! PT 0.98 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 0.99 ! LA 0.95 MK 0.98 NL 1.00* OV 1.11 ! PT 0.94 SC 1.06 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.81 ! LA 1.00* MK 1.02 NL 1.00* OV 1.01 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 327 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.104112Jy sigma=0.000652 ! Fit after self-cal, rms=0.101593Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.738 mas, bmaj=7.244 mas, bpa=-1.355 degrees ! Estimated noise=1360.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665626 Jy ! Component: 100 - total flux cleaned = 0.00787849 Jy ! Component: 150 - total flux cleaned = 0.00780021 Jy ! Component: 200 - total flux cleaned = 0.00786711 Jy ! Total flux subtracted in 200 components = 0.00786711 Jy ! Clean residual min=-0.004589 max=0.005183 Jy/beam ! Clean residual mean=0.000043 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.233484 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.233484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101157Jy sigma=0.000647 ! Fit after self-cal, rms=0.101118Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101118Jy sigma=0.000647 ! Fit after self-cal, rms=0.100084Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=7.226 mas, bpa=-1.357 degrees ! Estimated noise=1351.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258709 Jy ! Component: 100 - total flux cleaned = 0.0028958 Jy ! Component: 150 - total flux cleaned = 0.00289094 Jy ! Component: 200 - total flux cleaned = 0.0029248 Jy ! Total flux subtracted in 200 components = 0.0029248 Jy ! Clean residual min=-0.003735 max=0.004526 Jy/beam ! Clean residual mean=0.000021 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.236409 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.236409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100007Jy sigma=0.000645 ! Fit after self-cal, rms=0.099993Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-103, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349865 Jy ! Component: 100 - total flux cleaned = 0.00394495 Jy ! Component: 150 - total flux cleaned = 0.00436585 Jy ! Component: 200 - total flux cleaned = 0.00468803 Jy ! Total flux subtracted in 200 components = 0.00468803 Jy ! Clean residual min=-0.003633 max=0.003419 Jy/beam ! Clean residual mean=0.000001 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.241097 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 109 components and 0.241097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099851Jy sigma=0.000644 ! Fit after self-cal, rms=0.099839Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099839Jy sigma=0.000644 ! Fit after self-cal, rms=0.099226Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=7.227 mas, bpa=-1.349 degrees ! Estimated noise=1344.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016188 Jy ! Component: 100 - total flux cleaned = 0.0022051 Jy ! Component: 150 - total flux cleaned = 0.00243127 Jy ! Component: 200 - total flux cleaned = 0.00256884 Jy ! Total flux subtracted in 200 components = 0.00256884 Jy ! Clean residual min=-0.003269 max=0.002925 Jy/beam ! Clean residual mean=-0.000011 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.243666 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.243666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099190Jy sigma=0.000644 ! Fit after self-cal, rms=0.099183Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467767 Jy ! Component: 100 - total flux cleaned = 0.000530856 Jy ! Component: 150 - total flux cleaned = 0.000561453 Jy ! Component: 200 - total flux cleaned = 0.0005616 Jy ! Total flux subtracted in 200 components = 0.0005616 Jy ! Clean residual min=-0.003234 max=0.002908 Jy/beam ! Clean residual mean=-0.000011 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.244227 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 0.244227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099166Jy sigma=0.000644 ! Fit after self-cal, rms=0.099165Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099165Jy sigma=0.000643 ! Fit after self-cal, rms=0.099038Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.744 mas, bmaj=26.48 mas, bpa=0.5186 degrees ! Estimated noise=1868.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501095 Jy ! Component: 100 - total flux cleaned = 0.000580007 Jy ! Component: 150 - total flux cleaned = 0.000583446 Jy ! Component: 200 - total flux cleaned = 0.000624187 Jy ! Total flux subtracted in 200 components = 0.000624187 Jy ! Clean residual min=-0.002743 max=0.003048 Jy/beam ! Clean residual mean=-0.000024 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.244851 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 0.244851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099032Jy sigma=0.000643 ! Fit after self-cal, rms=0.099028Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124203 Jy ! Component: 100 - total flux cleaned = 0.00014342 Jy ! Component: 150 - total flux cleaned = 0.000162082 Jy ! Component: 200 - total flux cleaned = 0.000195755 Jy ! Total flux subtracted in 200 components = 0.000195755 Jy ! Clean residual min=-0.002778 max=0.003064 Jy/beam ! Clean residual mean=-0.000022 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.245047 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 149 components and 0.245047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099026Jy sigma=0.000643 ! Fit after self-cal, rms=0.099025Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=7.229 mas, bpa=-1.344 degrees ! Estimated noise=1342.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.725 x 7.229 at -1.344 degrees (North through East) ! Clean map min=-0.0031095 max=0.15622 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.238 mas, bmaj=6.224 mas, bpa=-2.846 degrees ! Estimated noise=2685.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118375 Jy ! Component: 100 - total flux cleaned = 0.156416 Jy ! Component: 150 - total flux cleaned = 0.179764 Jy ! Component: 200 - total flux cleaned = 0.196243 Jy ! Total flux subtracted in 200 components = 0.196243 Jy ! Clean residual min=-0.009059 max=0.010327 Jy/beam ! Clean residual mean=-0.000052 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 0.196243 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.196243 Jy ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=7.229 mas, bpa=-1.344 degrees ! Estimated noise=1342.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162031 Jy ! Component: 100 - total flux cleaned = 0.0249227 Jy ! Component: 150 - total flux cleaned = 0.0309905 Jy ! Component: 200 - total flux cleaned = 0.0354694 Jy ! Total flux subtracted in 200 components = 0.0354694 Jy ! Clean residual min=-0.003924 max=0.003367 Jy/beam ! Clean residual mean=-0.000015 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.231713 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 86 components and 0.231713 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.744 mas, bmaj=26.48 mas, bpa=0.5186 degrees ! Estimated noise=1868.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00558504 Jy ! Component: 100 - total flux cleaned = 0.00894046 Jy ! Component: 150 - total flux cleaned = 0.0110414 Jy ! Component: 200 - total flux cleaned = 0.0123948 Jy ! Total flux subtracted in 200 components = 0.0123948 Jy ! Clean residual min=-0.002589 max=0.003233 Jy/beam ! Clean residual mean=-0.000022 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.244108 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398191 Jy ! Component: 100 - total flux cleaned = 0.000502524 Jy ! Component: 150 - total flux cleaned = 0.000564036 Jy ! Component: 200 - total flux cleaned = 0.00065073 Jy ! Total flux subtracted in 200 components = 0.00065073 Jy ! Clean residual min=-0.002528 max=0.003252 Jy/beam ! Clean residual mean=-0.000020 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.244758 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.244758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=7.229 mas, bpa=-1.344 degrees ! Estimated noise=1342.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304576 Jy ! Component: 100 - total flux cleaned = -0.000367982 Jy ! Component: 150 - total flux cleaned = -0.00030884 Jy ! Component: 200 - total flux cleaned = -0.000153555 Jy ! Total flux subtracted in 200 components = -0.000153555 Jy ! Clean residual min=-0.003433 max=0.003355 Jy/beam ! Clean residual mean=-0.000008 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.244605 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.244605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099127Jy sigma=0.000644 ! Fit after self-cal, rms=0.099102Jy sigma=0.000644 wmodel J2022-4038_S_2017_08_05_pus_map.mod ! Writing 133 model components to file: J2022-4038_S_2017_08_05_pus_map.mod wobs J2022-4038_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2022-4038_S_2017_08_05_pus_uvs.fits wwins J2022-4038_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J2022-4038_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143423 Jy ! Component: 100 - total flux cleaned = -0.000298012 Jy ! Component: 150 - total flux cleaned = -0.000687172 Jy ! Component: 200 - total flux cleaned = -0.00091723 Jy ! Component: 250 - total flux cleaned = -0.00113487 Jy ! Component: 300 - total flux cleaned = -0.00113538 Jy ! Component: 350 - total flux cleaned = -0.00113459 Jy ! Component: 400 - total flux cleaned = -0.00102133 Jy ! Component: 450 - total flux cleaned = -0.000875784 Jy ! Component: 500 - total flux cleaned = -0.000596512 Jy ! Component: 550 - total flux cleaned = -0.0003952 Jy ! Component: 600 - total flux cleaned = -0.000297286 Jy ! Component: 650 - total flux cleaned = -0.000140423 Jy ! Component: 700 - total flux cleaned = -0.000170968 Jy ! Component: 750 - total flux cleaned = -5.2954e-05 Jy ! Component: 800 - total flux cleaned = 4.32972e-06 Jy ! Component: 850 - total flux cleaned = 0.000143654 Jy ! Component: 900 - total flux cleaned = 0.000224149 Jy ! Component: 950 - total flux cleaned = 0.000355172 Jy ! Component: 1000 - total flux cleaned = 0.000431461 Jy ! Component: 1050 - total flux cleaned = 0.000531451 Jy ! Component: 1100 - total flux cleaned = 0.00060485 Jy ! Component: 1150 - total flux cleaned = 0.000676131 Jy ! Component: 1200 - total flux cleaned = 0.000745699 Jy ! Component: 1250 - total flux cleaned = 0.000768323 Jy ! Component: 1300 - total flux cleaned = 0.000723387 Jy ! Component: 1350 - total flux cleaned = 0.000789414 Jy ! Component: 1400 - total flux cleaned = 0.000767602 Jy ! Component: 1450 - total flux cleaned = 0.000831659 Jy ! Component: 1500 - total flux cleaned = 0.000852901 Jy ! Component: 1550 - total flux cleaned = 0.000853013 Jy ! Component: 1600 - total flux cleaned = 0.000853155 Jy ! Component: 1650 - total flux cleaned = 0.000872864 Jy ! Component: 1700 - total flux cleaned = 0.000814673 Jy ! Component: 1750 - total flux cleaned = 0.000891246 Jy ! Component: 1800 - total flux cleaned = 0.000872465 Jy ! Component: 1850 - total flux cleaned = 0.000891146 Jy ! Component: 1900 - total flux cleaned = 0.000909614 Jy ! Component: 1950 - total flux cleaned = 0.00090958 Jy ! Component: 2000 - total flux cleaned = 0.000873518 Jy ! Component: 2050 - total flux cleaned = 0.000820553 Jy ! Component: 2100 - total flux cleaned = 0.000768272 Jy ! Component: 2150 - total flux cleaned = 0.000716574 Jy ! Component: 2200 - total flux cleaned = 0.000631156 Jy ! Component: 2250 - total flux cleaned = 0.000563948 Jy ! Component: 2300 - total flux cleaned = 0.000513922 Jy ! Component: 2350 - total flux cleaned = 0.000447733 Jy ! Component: 2400 - total flux cleaned = 0.000349819 Jy ! Component: 2450 - total flux cleaned = 0.000317487 Jy ! Component: 2500 - total flux cleaned = 0.000253604 Jy ! Component: 2550 - total flux cleaned = 0.000190247 Jy ! Component: 2600 - total flux cleaned = 8.04811e-05 Jy ! Component: 2650 - total flux cleaned = -2.85238e-05 Jy ! Component: 2700 - total flux cleaned = -0.00010541 Jy ! Component: 2750 - total flux cleaned = -0.000181996 Jy ! Component: 2800 - total flux cleaned = -0.000273025 Jy ! Component: 2850 - total flux cleaned = -0.000378433 Jy ! Component: 2900 - total flux cleaned = -0.000452968 Jy ! Component: 2950 - total flux cleaned = -0.000512252 Jy ! Component: 3000 - total flux cleaned = -0.000556243 Jy ! Component: 3050 - total flux cleaned = -0.000585416 Jy ! Component: 3100 - total flux cleaned = -0.000614524 Jy ! Component: 3150 - total flux cleaned = -0.000643574 Jy ! Component: 3200 - total flux cleaned = -0.000729563 Jy ! Component: 3250 - total flux cleaned = -0.000814853 Jy ! Component: 3300 - total flux cleaned = -0.000843146 Jy ! Component: 3350 - total flux cleaned = -0.000871259 Jy ! Component: 3400 - total flux cleaned = -0.000941143 Jy ! Component: 3450 - total flux cleaned = -0.000982856 Jy ! Component: 3500 - total flux cleaned = -0.00101054 Jy ! Component: 3550 - total flux cleaned = -0.00105181 Jy ! Component: 3600 - total flux cleaned = -0.00110655 Jy ! Component: 3650 - total flux cleaned = -0.00112019 Jy ! Component: 3700 - total flux cleaned = -0.00113368 Jy ! Component: 3750 - total flux cleaned = -0.00117423 Jy ! Component: 3800 - total flux cleaned = -0.00120111 Jy ! Component: 3850 - total flux cleaned = -0.00124123 Jy ! Component: 3900 - total flux cleaned = -0.00129458 Jy ! Component: 3950 - total flux cleaned = -0.00129457 Jy ! Component: 4000 - total flux cleaned = -0.00134765 Jy ! Component: 4050 - total flux cleaned = -0.0013741 Jy ! Total flux subtracted in 4096 components = -0.00142688 Jy ! Clean residual min=-0.000837 max=0.000801 Jy/beam ! Clean residual mean=-0.000008 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.243178 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 381 components and 0.243178 Jy ![Exited script file: muppet] wmap "J2022-4038_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.725 x 7.229 at -1.344 degrees (North through East) ! Clean map min=-0.0021743 max=0.15099 Jy/beam ! Writing clean map to FITS file: J2022-4038_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15099 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226242 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.449518 0.449518 0.899036 1.79807 3.59614 7.19229 14.3846 28.7692 57.5383 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.15 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.725 x 7.229 at -1.344 degrees (North through East) ! Clean map min=-0.0021743 max=0.15099 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2022-4038_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:37:58 2019