! Started logfile: J2021+0515_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:25 2019 obs J2021+0515_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2021+0515_S_2017_05_27_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.956085 visibilities/baseline/integration-bin. ! Found source: J2021+0515 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2021+0515_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 49 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 443 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.622602Jy sigma=0.008362 ! Fit after self-cal, rms=0.601240Jy sigma=0.008278 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.075 mas, bpa=-5.016 degrees ! Estimated noise=971.725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.319839 Jy ! Component: 100 - total flux cleaned = 0.389835 Jy ! Total flux subtracted in 100 components = 0.389835 Jy ! Clean residual min=-0.018635 max=0.021308 Jy/beam ! Clean residual mean=-0.000008 rms=0.005165 Jy/beam ! Combined flux in latest and established models = 0.389835 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.389835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284344Jy sigma=0.002676 ! Fit after self-cal, rms=0.284344Jy sigma=0.002676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.959 mas, bpa=-3.63 degrees ! Estimated noise=778.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246354 Jy ! Component: 100 - total flux cleaned = 0.0359723 Jy ! Component: 150 - total flux cleaned = 0.0379376 Jy ! Component: 200 - total flux cleaned = 0.0383535 Jy ! Total flux subtracted in 200 components = 0.0383535 Jy ! Clean residual min=-0.018301 max=0.017025 Jy/beam ! Clean residual mean=0.000017 rms=0.004482 Jy/beam ! Combined flux in latest and established models = 0.428188 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.428188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278203Jy sigma=0.002851 ! Fit after self-cal, rms=0.278210Jy sigma=0.002851 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.87 HN 0.99 KP 0.99 ! LA 0.97 MK 0.97 NL 0.87 OV 1.00 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.92 HN 1.04 KP 0.96 ! LA 0.93 MK 0.98 NL 1.01 OV 1.02 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.44 FD 0.94 HN 1.02 KP 0.97 ! LA 0.99 MK 0.99 NL 0.98 OV 0.93 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 10.99 HN 0.98 KP 1.00* ! LA 1.14 MK 1.42 NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.278210Jy sigma=0.002851 ! Fit after self-cal, rms=1.005356Jy sigma=0.001091 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.337 mas, bmaj=8.052 mas, bpa=-3.545 degrees ! Estimated noise=826.232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205535 Jy ! Component: 100 - total flux cleaned = 0.0197792 Jy ! Component: 150 - total flux cleaned = 0.0191405 Jy ! Component: 200 - total flux cleaned = 0.0188855 Jy ! Total flux subtracted in 200 components = 0.0188855 Jy ! Clean residual min=-0.012743 max=0.013740 Jy/beam ! Clean residual mean=-0.000009 rms=0.003220 Jy/beam ! Combined flux in latest and established models = 0.447074 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.447074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.999600Jy sigma=0.001108 ! Fit after self-cal, rms=0.999923Jy sigma=0.001107 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.999923Jy sigma=0.001107 ! Fit after self-cal, rms=0.737402Jy sigma=0.000826 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=8.074 mas, bpa=-3.659 degrees ! Estimated noise=845.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107164 Jy ! Component: 100 - total flux cleaned = 0.0103791 Jy ! Component: 150 - total flux cleaned = 0.00995228 Jy ! Component: 200 - total flux cleaned = 0.00983419 Jy ! Total flux subtracted in 200 components = 0.00983419 Jy ! Clean residual min=-0.008400 max=0.006386 Jy/beam ! Clean residual mean=-0.000006 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.456908 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.456908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735660Jy sigma=0.000830 ! Fit after self-cal, rms=0.735701Jy sigma=0.000829 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109534 Jy ! Component: 100 - total flux cleaned = -0.000405217 Jy ! Component: 150 - total flux cleaned = -0.000591046 Jy ! Component: 200 - total flux cleaned = -0.00076674 Jy ! Total flux subtracted in 200 components = -0.00076674 Jy ! Clean residual min=-0.008253 max=0.006362 Jy/beam ! Clean residual mean=-0.000007 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.456141 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.456141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735493Jy sigma=0.000829 ! Fit after self-cal, rms=0.735494Jy sigma=0.000829 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.735494Jy sigma=0.000829 ! Fit after self-cal, rms=0.737733Jy sigma=0.000805 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.339 mas, bmaj=8.078 mas, bpa=-3.79 degrees ! Estimated noise=859.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00745287 Jy ! Component: 100 - total flux cleaned = 0.00974908 Jy ! Component: 150 - total flux cleaned = 0.0096804 Jy ! Component: 200 - total flux cleaned = 0.00954072 Jy ! Total flux subtracted in 200 components = 0.00954072 Jy ! Clean residual min=-0.006143 max=0.005275 Jy/beam ! Clean residual mean=-0.000009 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.465682 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.465682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736780Jy sigma=0.000807 ! Fit after self-cal, rms=0.736777Jy sigma=0.000807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.48454e-06 Jy ! Component: 100 - total flux cleaned = -0.000118847 Jy ! Component: 150 - total flux cleaned = -0.000239926 Jy ! Component: 200 - total flux cleaned = -0.000296545 Jy ! Total flux subtracted in 200 components = -0.000296545 Jy ! Clean residual min=-0.006063 max=0.005238 Jy/beam ! Clean residual mean=-0.000009 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.465385 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.465385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736693Jy sigma=0.000808 ! Fit after self-cal, rms=0.736693Jy sigma=0.000808 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.736693Jy sigma=0.000808 ! Fit after self-cal, rms=0.753058Jy sigma=0.000805 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=12.45 mas, bpa=-4.216 degrees ! Estimated noise=1064.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766173 Jy ! Component: 100 - total flux cleaned = 0.00754418 Jy ! Component: 150 - total flux cleaned = 0.0071781 Jy ! Component: 200 - total flux cleaned = 0.00696352 Jy ! Total flux subtracted in 200 components = 0.00696352 Jy ! Clean residual min=-0.008456 max=0.007376 Jy/beam ! Clean residual mean=-0.000025 rms=0.002305 Jy/beam ! Combined flux in latest and established models = 0.472349 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.472349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.752048Jy sigma=0.000808 ! Fit after self-cal, rms=0.752052Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221706 Jy ! Component: 100 - total flux cleaned = -0.000384151 Jy ! Component: 150 - total flux cleaned = -0.000529753 Jy ! Component: 200 - total flux cleaned = -0.000660483 Jy ! Total flux subtracted in 200 components = -0.000660483 Jy ! Clean residual min=-0.008281 max=0.007419 Jy/beam ! Clean residual mean=-0.000026 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.471688 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.471688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.751969Jy sigma=0.000810 ! Fit after self-cal, rms=0.751969Jy sigma=0.000810 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=8.085 mas, bpa=-3.909 degrees ! Estimated noise=875.481 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 8.085 at -3.909 degrees (North through East) ! Clean map min=-0.012934 max=0.47872 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=7.183 mas, bpa=-5.022 degrees ! Estimated noise=1097.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.361114 Jy ! Component: 100 - total flux cleaned = 0.440149 Jy ! Component: 150 - total flux cleaned = 0.46468 Jy ! Component: 200 - total flux cleaned = 0.473062 Jy ! Total flux subtracted in 200 components = 0.473062 Jy ! Clean residual min=-0.010036 max=0.006376 Jy/beam ! Clean residual mean=-0.000005 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.473062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.473062 Jy ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=8.085 mas, bpa=-3.909 degrees ! Estimated noise=875.481 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304265 Jy ! Component: 100 - total flux cleaned = 0.00279354 Jy ! Component: 150 - total flux cleaned = 0.00257315 Jy ! Component: 200 - total flux cleaned = 0.00239529 Jy ! Total flux subtracted in 200 components = 0.00239529 Jy ! Clean residual min=-0.007594 max=0.005649 Jy/beam ! Clean residual mean=-0.000010 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.475457 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.475457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=12.45 mas, bpa=-4.216 degrees ! Estimated noise=1064.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148497 Jy ! Component: 100 - total flux cleaned = -0.000380834 Jy ! Component: 150 - total flux cleaned = -0.000987159 Jy ! Component: 200 - total flux cleaned = -0.00137915 Jy ! Total flux subtracted in 200 components = -0.00137915 Jy ! Clean residual min=-0.008549 max=0.007311 Jy/beam ! Clean residual mean=-0.000023 rms=0.002319 Jy/beam ! Combined flux in latest and established models = 0.474078 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000229059 Jy ! Component: 100 - total flux cleaned = -0.000529166 Jy ! Component: 150 - total flux cleaned = -0.000708734 Jy ! Component: 200 - total flux cleaned = -0.000868533 Jy ! Total flux subtracted in 200 components = -0.000868533 Jy ! Clean residual min=-0.008310 max=0.007349 Jy/beam ! Clean residual mean=-0.000024 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.47321 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.47321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=8.085 mas, bpa=-3.909 degrees ! Estimated noise=875.481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223833 Jy ! Component: 100 - total flux cleaned = 0.00224735 Jy ! Component: 150 - total flux cleaned = 0.00216975 Jy ! Component: 200 - total flux cleaned = 0.00203312 Jy ! Total flux subtracted in 200 components = 0.00203312 Jy ! Clean residual min=-0.006411 max=0.005336 Jy/beam ! Clean residual mean=-0.000010 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 0.475243 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.475243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.751855Jy sigma=0.000810 ! Fit after self-cal, rms=0.751858Jy sigma=0.000810 wmodel J2021+0515_S_2017_05_27_pus_map.mod ! Writing 56 model components to file: J2021+0515_S_2017_05_27_pus_map.mod wobs J2021+0515_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2021+0515_S_2017_05_27_pus_uvs.fits wwins J2021+0515_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J2021+0515_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286739 Jy ! Component: 100 - total flux cleaned = -0.00508544 Jy ! Component: 150 - total flux cleaned = -0.00659595 Jy ! Component: 200 - total flux cleaned = -0.00756354 Jy ! Component: 250 - total flux cleaned = -0.00840361 Jy ! Component: 300 - total flux cleaned = -0.00903969 Jy ! Component: 350 - total flux cleaned = -0.00975032 Jy ! Component: 400 - total flux cleaned = -0.0106172 Jy ! Component: 450 - total flux cleaned = -0.011297 Jy ! Component: 500 - total flux cleaned = -0.0120477 Jy ! Component: 550 - total flux cleaned = -0.0127031 Jy ! Component: 600 - total flux cleaned = -0.013187 Jy ! Component: 650 - total flux cleaned = -0.0135056 Jy ! Component: 700 - total flux cleaned = -0.0138195 Jy ! Component: 750 - total flux cleaned = -0.0141281 Jy ! Component: 800 - total flux cleaned = -0.014433 Jy ! Component: 850 - total flux cleaned = -0.0148852 Jy ! Component: 900 - total flux cleaned = -0.0151089 Jy ! Component: 950 - total flux cleaned = -0.0152561 Jy ! Component: 1000 - total flux cleaned = -0.015475 Jy ! Component: 1050 - total flux cleaned = -0.0154757 Jy ! Component: 1100 - total flux cleaned = -0.0155472 Jy ! Component: 1150 - total flux cleaned = -0.0156166 Jy ! Component: 1200 - total flux cleaned = -0.0154078 Jy ! Component: 1250 - total flux cleaned = -0.0154075 Jy ! Component: 1300 - total flux cleaned = -0.0154752 Jy ! Component: 1350 - total flux cleaned = -0.0153397 Jy ! Component: 1400 - total flux cleaned = -0.0154058 Jy ! Component: 1450 - total flux cleaned = -0.0152718 Jy ! Component: 1500 - total flux cleaned = -0.0152716 Jy ! Component: 1550 - total flux cleaned = -0.0152058 Jy ! Component: 1600 - total flux cleaned = -0.0152059 Jy ! Component: 1650 - total flux cleaned = -0.0150137 Jy ! Component: 1700 - total flux cleaned = -0.0150775 Jy ! Component: 1750 - total flux cleaned = -0.0149513 Jy ! Component: 1800 - total flux cleaned = -0.0150763 Jy ! Component: 1850 - total flux cleaned = -0.0149515 Jy ! Component: 1900 - total flux cleaned = -0.0150744 Jy ! Component: 1950 - total flux cleaned = -0.0150747 Jy ! Component: 2000 - total flux cleaned = -0.0148928 Jy ! Component: 2050 - total flux cleaned = -0.0150138 Jy ! Component: 2100 - total flux cleaned = -0.0150142 Jy ! Component: 2150 - total flux cleaned = -0.0151929 Jy ! Component: 2200 - total flux cleaned = -0.0151931 Jy ! Component: 2250 - total flux cleaned = -0.015252 Jy ! Component: 2300 - total flux cleaned = -0.0153684 Jy ! Component: 2350 - total flux cleaned = -0.0152523 Jy ! Component: 2400 - total flux cleaned = -0.0151368 Jy ! Component: 2450 - total flux cleaned = -0.0152518 Jy ! Component: 2500 - total flux cleaned = -0.0151379 Jy ! Component: 2550 - total flux cleaned = -0.0151382 Jy ! Component: 2600 - total flux cleaned = -0.0150817 Jy ! Component: 2650 - total flux cleaned = -0.0150255 Jy ! Component: 2700 - total flux cleaned = -0.0149695 Jy ! Component: 2750 - total flux cleaned = -0.0148033 Jy ! Component: 2800 - total flux cleaned = -0.0146381 Jy ! Component: 2850 - total flux cleaned = -0.0147482 Jy ! Component: 2900 - total flux cleaned = -0.0145834 Jy ! Component: 2950 - total flux cleaned = -0.0144748 Jy ! Component: 3000 - total flux cleaned = -0.0143663 Jy ! Component: 3050 - total flux cleaned = -0.0143124 Jy ! Component: 3100 - total flux cleaned = -0.0139906 Jy ! Component: 3150 - total flux cleaned = -0.0139906 Jy ! Component: 3200 - total flux cleaned = -0.0138309 Jy ! Component: 3250 - total flux cleaned = -0.0136722 Jy ! Component: 3300 - total flux cleaned = -0.0134617 Jy ! Component: 3350 - total flux cleaned = -0.0132525 Jy ! Component: 3400 - total flux cleaned = -0.0132528 Jy ! Component: 3450 - total flux cleaned = -0.0130448 Jy ! Component: 3500 - total flux cleaned = -0.0129933 Jy ! Component: 3550 - total flux cleaned = -0.012839 Jy ! Component: 3600 - total flux cleaned = -0.0126855 Jy ! Component: 3650 - total flux cleaned = -0.0124301 Jy ! Component: 3700 - total flux cleaned = -0.0123286 Jy ! Component: 3750 - total flux cleaned = -0.0122779 Jy ! Component: 3800 - total flux cleaned = -0.0120262 Jy ! Component: 3850 - total flux cleaned = -0.0121763 Jy ! Component: 3900 - total flux cleaned = -0.0120264 Jy ! Component: 3950 - total flux cleaned = -0.0119271 Jy ! Component: 4000 - total flux cleaned = -0.0117287 Jy ! Component: 4050 - total flux cleaned = -0.011531 Jy ! Total flux subtracted in 4096 components = -0.0113342 Jy ! Clean residual min=-0.003081 max=0.003105 Jy/beam ! Clean residual mean=-0.000001 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.463908 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 376 components and 0.463908 Jy ![Exited script file: muppet] wmap "J2021+0515_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 8.085 at -3.909 degrees (North through East) ! Clean map min=-0.011358 max=0.47889 Jy/beam ! Writing clean map to FITS file: J2021+0515_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.478886 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000967407 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.606036 0.606036 1.21207 2.42414 4.84829 9.69657 19.3931 38.7863 77.5726 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.478 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.333 x 8.085 at -3.909 degrees (North through East) ! Clean map min=-0.011358 max=0.47889 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2021+0515_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:29 2019