! Started logfile: J2016-2708_S_2017_02_19_pus_uvs.log on Sat May 4 18:57:55 2019 obs J2016-2708_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2016-2708_S_2017_02_19_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.665481 visibilities/baseline/integration-bin. ! Found source: J2016-2708 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 8984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2016-2708_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 387 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.874723Jy sigma=0.005493 ! Fit after self-cal, rms=0.851114Jy sigma=0.005349 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=8.27 mas, bpa=4.242 degrees ! Estimated noise=2104.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114681 Jy ! Component: 100 - total flux cleaned = 0.140936 Jy ! Total flux subtracted in 100 components = 0.140936 Jy ! Clean residual min=-0.012283 max=0.018639 Jy/beam ! Clean residual mean=0.000046 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 0.140936 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.140936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125114Jy sigma=0.000709 ! Fit after self-cal, rms=0.125082Jy sigma=0.000709 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.209 mas, bmaj=9.144 mas, bpa=4.055 degrees ! Estimated noise=1334.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158555 Jy ! Component: 100 - total flux cleaned = 0.0236535 Jy ! Component: 150 - total flux cleaned = 0.0278837 Jy ! Component: 200 - total flux cleaned = 0.0303005 Jy ! Total flux subtracted in 200 components = 0.0303005 Jy ! Clean residual min=-0.010111 max=0.013169 Jy/beam ! Clean residual mean=0.000055 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 0.171236 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.171236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122687Jy sigma=0.000699 ! Fit after self-cal, rms=0.122660Jy sigma=0.000698 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.93 HN 1.41 KP 1.00 ! LA 0.96 MK 1.09 NL 0.93 OV 1.07 ! PT 1.00* SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.46 KP 1.00 ! LA 0.93 MK 1.05 NL 1.09 OV 1.08 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 1.42 KP 0.85 ! LA 0.73 MK 1.08 NL 1.24 OV 0.99 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.87 KP 1.00* ! LA 0.72 MK 1.09 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.122660Jy sigma=0.000698 ! Fit after self-cal, rms=0.124635Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=9.173 mas, bpa=5.541 degrees ! Estimated noise=1348.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 18.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00743279 Jy ! Component: 100 - total flux cleaned = 0.00828201 Jy ! Component: 150 - total flux cleaned = 0.00794109 Jy ! Component: 200 - total flux cleaned = 0.00778844 Jy ! Total flux subtracted in 200 components = 0.00778844 Jy ! Clean residual min=-0.007632 max=0.007510 Jy/beam ! Clean residual mean=-0.000023 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.179025 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.179025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123459Jy sigma=0.000672 ! Fit after self-cal, rms=0.123555Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123555Jy sigma=0.000670 ! Fit after self-cal, rms=0.146090Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=9.286 mas, bpa=5.166 degrees ! Estimated noise=1364.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276877 Jy ! Component: 100 - total flux cleaned = 0.00327042 Jy ! Component: 150 - total flux cleaned = 0.00361043 Jy ! Component: 200 - total flux cleaned = 0.00373745 Jy ! Total flux subtracted in 200 components = 0.00373745 Jy ! Clean residual min=-0.003167 max=0.003633 Jy/beam ! Clean residual mean=-0.000013 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.182762 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.182762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146023Jy sigma=0.000657 ! Fit after self-cal, rms=0.146322Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-121.5, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032821 Jy ! Component: 100 - total flux cleaned = 0.0039005 Jy ! Component: 150 - total flux cleaned = 0.0041538 Jy ! Component: 200 - total flux cleaned = 0.00442856 Jy ! Total flux subtracted in 200 components = 0.00442856 Jy ! Clean residual min=-0.003092 max=0.002885 Jy/beam ! Clean residual mean=-0.000009 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.187191 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.187191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146215Jy sigma=0.000656 ! Fit after self-cal, rms=0.146198Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146198Jy sigma=0.000656 ! Fit after self-cal, rms=0.147909Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=9.28 mas, bpa=5.11 degrees ! Estimated noise=1362.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011739 Jy ! Component: 100 - total flux cleaned = 0.00150254 Jy ! Component: 150 - total flux cleaned = 0.00184124 Jy ! Component: 200 - total flux cleaned = 0.00197282 Jy ! Total flux subtracted in 200 components = 0.00197282 Jy ! Clean residual min=-0.003015 max=0.002870 Jy/beam ! Clean residual mean=-0.000007 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.189164 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 108 components and 0.189164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147861Jy sigma=0.000656 ! Fit after self-cal, rms=0.147870Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423452 Jy ! Component: 100 - total flux cleaned = 0.00050675 Jy ! Component: 150 - total flux cleaned = 0.000621944 Jy ! Component: 200 - total flux cleaned = 0.000731951 Jy ! Total flux subtracted in 200 components = 0.000731951 Jy ! Clean residual min=-0.002921 max=0.002834 Jy/beam ! Clean residual mean=-0.000008 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.189896 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.189896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147841Jy sigma=0.000655 ! Fit after self-cal, rms=0.147839Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147839Jy sigma=0.000655 ! Fit after self-cal, rms=0.147734Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.531 mas, bmaj=17.21 mas, bpa=5.237 degrees ! Estimated noise=1708.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02201e-05 Jy ! Component: 100 - total flux cleaned = 0.000126877 Jy ! Component: 150 - total flux cleaned = 0.000176359 Jy ! Component: 200 - total flux cleaned = 0.000220147 Jy ! Total flux subtracted in 200 components = 0.000220147 Jy ! Clean residual min=-0.002404 max=0.002501 Jy/beam ! Clean residual mean=-0.000014 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.190116 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.190116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147723Jy sigma=0.000655 ! Fit after self-cal, rms=0.147724Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.9246e-05 Jy ! Component: 100 - total flux cleaned = 3.28339e-05 Jy ! Component: 150 - total flux cleaned = -1.56982e-05 Jy ! Component: 200 - total flux cleaned = -6.25525e-05 Jy ! Total flux subtracted in 200 components = -6.25525e-05 Jy ! Clean residual min=-0.002407 max=0.002481 Jy/beam ! Clean residual mean=-0.000014 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.190053 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 140 components and 0.190053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147718Jy sigma=0.000655 ! Fit after self-cal, rms=0.147718Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=9.276 mas, bpa=5.078 degrees ! Estimated noise=1362.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 9.276 at 5.078 degrees (North through East) ! Clean map min=-0.0028655 max=0.15083 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=8.357 mas, bpa=5.43 degrees ! Estimated noise=2232.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.121231 Jy ! Component: 100 - total flux cleaned = 0.148646 Jy ! Component: 150 - total flux cleaned = 0.160161 Jy ! Component: 200 - total flux cleaned = 0.167354 Jy ! Total flux subtracted in 200 components = 0.167354 Jy ! Clean residual min=-0.004599 max=0.004696 Jy/beam ! Clean residual mean=0.000009 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.167354 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.167354 Jy ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=9.276 mas, bpa=5.078 degrees ! Estimated noise=1362.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598115 Jy ! Component: 100 - total flux cleaned = 0.0102386 Jy ! Component: 150 - total flux cleaned = 0.0135707 Jy ! Component: 200 - total flux cleaned = 0.0161025 Jy ! Total flux subtracted in 200 components = 0.0161025 Jy ! Clean residual min=-0.003305 max=0.002991 Jy/beam ! Clean residual mean=0.000000 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.183456 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 68 components and 0.183456 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.531 mas, bmaj=17.21 mas, bpa=5.237 degrees ! Estimated noise=1708.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270889 Jy ! Component: 100 - total flux cleaned = 0.00418959 Jy ! Component: 150 - total flux cleaned = 0.00504464 Jy ! Component: 200 - total flux cleaned = 0.00564758 Jy ! Total flux subtracted in 200 components = 0.00564758 Jy ! Clean residual min=-0.002573 max=0.002363 Jy/beam ! Clean residual mean=-0.000010 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.189104 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293251 Jy ! Component: 100 - total flux cleaned = 0.000579914 Jy ! Component: 150 - total flux cleaned = 0.000663918 Jy ! Component: 200 - total flux cleaned = 0.000715771 Jy ! Total flux subtracted in 200 components = 0.000715771 Jy ! Clean residual min=-0.002512 max=0.002293 Jy/beam ! Clean residual mean=-0.000011 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.189819 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 108 components and 0.18982 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=9.276 mas, bpa=5.078 degrees ! Estimated noise=1362.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491241 Jy ! Component: 100 - total flux cleaned = -0.000486036 Jy ! Component: 150 - total flux cleaned = -0.000489196 Jy ! Component: 200 - total flux cleaned = -0.000377323 Jy ! Total flux subtracted in 200 components = -0.000377323 Jy ! Clean residual min=-0.002956 max=0.002870 Jy/beam ! Clean residual mean=-0.000005 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.189442 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.189442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147766Jy sigma=0.000656 ! Fit after self-cal, rms=0.147738Jy sigma=0.000656 wmodel J2016-2708_S_2017_02_19_pus_map.mod ! Writing 125 model components to file: J2016-2708_S_2017_02_19_pus_map.mod wobs J2016-2708_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2016-2708_S_2017_02_19_pus_uvs.fits wwins J2016-2708_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J2016-2708_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000545082 Jy ! Component: 100 - total flux cleaned = -0.000782686 Jy ! Component: 150 - total flux cleaned = -0.00100596 Jy ! Component: 200 - total flux cleaned = -0.00134218 Jy ! Component: 250 - total flux cleaned = -0.00162115 Jy ! Component: 300 - total flux cleaned = -0.00185086 Jy ! Component: 350 - total flux cleaned = -0.00218308 Jy ! Component: 400 - total flux cleaned = -0.00250425 Jy ! Component: 450 - total flux cleaned = -0.00278217 Jy ! Component: 500 - total flux cleaned = -0.00301973 Jy ! Component: 550 - total flux cleaned = -0.0032837 Jy ! Component: 600 - total flux cleaned = -0.00344511 Jy ! Component: 650 - total flux cleaned = -0.00357152 Jy ! Component: 700 - total flux cleaned = -0.00369523 Jy ! Component: 750 - total flux cleaned = -0.00384814 Jy ! Component: 800 - total flux cleaned = -0.00399722 Jy ! Component: 850 - total flux cleaned = -0.00405579 Jy ! Component: 900 - total flux cleaned = -0.00414207 Jy ! Component: 950 - total flux cleaned = -0.00425512 Jy ! Component: 1000 - total flux cleaned = -0.0044223 Jy ! Component: 1050 - total flux cleaned = -0.00447765 Jy ! Component: 1100 - total flux cleaned = -0.0046394 Jy ! Component: 1150 - total flux cleaned = -0.00479799 Jy ! Component: 1200 - total flux cleaned = -0.00477139 Jy ! Component: 1250 - total flux cleaned = -0.00490091 Jy ! Component: 1300 - total flux cleaned = -0.00502844 Jy ! Component: 1350 - total flux cleaned = -0.0051287 Jy ! Component: 1400 - total flux cleaned = -0.00530225 Jy ! Component: 1450 - total flux cleaned = -0.00527765 Jy ! Component: 1500 - total flux cleaned = -0.00539917 Jy ! Component: 1550 - total flux cleaned = -0.00559009 Jy ! Component: 1600 - total flux cleaned = -0.00563705 Jy ! Component: 1650 - total flux cleaned = -0.00575367 Jy ! Component: 1700 - total flux cleaned = -0.00584556 Jy ! Component: 1750 - total flux cleaned = -0.0059822 Jy ! Component: 1800 - total flux cleaned = -0.00609409 Jy ! Component: 1850 - total flux cleaned = -0.00613844 Jy ! Component: 1900 - total flux cleaned = -0.00624828 Jy ! Component: 1950 - total flux cleaned = -0.00637827 Jy ! Component: 2000 - total flux cleaned = -0.00646402 Jy ! Component: 2050 - total flux cleaned = -0.00657035 Jy ! Component: 2100 - total flux cleaned = -0.00671749 Jy ! Component: 2150 - total flux cleaned = -0.00675899 Jy ! Component: 2200 - total flux cleaned = -0.00684184 Jy ! Component: 2250 - total flux cleaned = -0.00694417 Jy ! Component: 2300 - total flux cleaned = -0.00704521 Jy ! Component: 2350 - total flux cleaned = -0.0070452 Jy ! Component: 2400 - total flux cleaned = -0.00712468 Jy ! Component: 2450 - total flux cleaned = -0.0071639 Jy ! Component: 2500 - total flux cleaned = -0.00720323 Jy ! Component: 2550 - total flux cleaned = -0.00726109 Jy ! Component: 2600 - total flux cleaned = -0.00729924 Jy ! Component: 2650 - total flux cleaned = -0.00733715 Jy ! Component: 2700 - total flux cleaned = -0.00739363 Jy ! Component: 2750 - total flux cleaned = -0.00746836 Jy ! Component: 2800 - total flux cleaned = -0.00746835 Jy ! Component: 2850 - total flux cleaned = -0.00754169 Jy ! Component: 2900 - total flux cleaned = -0.0076145 Jy ! Component: 2950 - total flux cleaned = -0.00765064 Jy ! Component: 3000 - total flux cleaned = -0.0077226 Jy ! Component: 3050 - total flux cleaned = -0.00770469 Jy ! Component: 3100 - total flux cleaned = -0.00772248 Jy ! Component: 3150 - total flux cleaned = -0.00782791 Jy ! Component: 3200 - total flux cleaned = -0.00784535 Jy ! Component: 3250 - total flux cleaned = -0.00788015 Jy ! Component: 3300 - total flux cleaned = -0.00793198 Jy ! Component: 3350 - total flux cleaned = -0.00796593 Jy ! Component: 3400 - total flux cleaned = -0.00799984 Jy ! Component: 3450 - total flux cleaned = -0.00798303 Jy ! Component: 3500 - total flux cleaned = -0.00801688 Jy ! Component: 3550 - total flux cleaned = -0.00803358 Jy ! Component: 3600 - total flux cleaned = -0.00805023 Jy ! Component: 3650 - total flux cleaned = -0.00805029 Jy ! Component: 3700 - total flux cleaned = -0.00806671 Jy ! Component: 3750 - total flux cleaned = -0.00808304 Jy ! Component: 3800 - total flux cleaned = -0.00811523 Jy ! Component: 3850 - total flux cleaned = -0.00811507 Jy ! Component: 3900 - total flux cleaned = -0.00813095 Jy ! Component: 3950 - total flux cleaned = -0.00814678 Jy ! Component: 4000 - total flux cleaned = -0.00808328 Jy ! Component: 4050 - total flux cleaned = -0.00811474 Jy ! Total flux subtracted in 4096 components = -0.00820871 Jy ! Clean residual min=-0.000948 max=0.000949 Jy/beam ! Clean residual mean=0.000003 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.181233 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 437 components and 0.181233 Jy ![Exited script file: muppet] wmap "J2016-2708_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 9.276 at 5.078 degrees (North through East) ! Clean map min=-0.0022809 max=0.15237 Jy/beam ! Writing clean map to FITS file: J2016-2708_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15237 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000285892 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.56289 0.56289 1.12578 2.25156 4.50312 9.00623 18.0125 36.0249 72.0499 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.152 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.283 x 9.276 at 5.078 degrees (North through East) ! Clean map min=-0.0022809 max=0.15237 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2016-2708_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:58:00 2019