! Started logfile: J2015+4628_S_2017_10_09_pus_uvs.log on Sun May 12 13:19:50 2019 obs J2015+4628_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2015+4628_S_2017_10_09_pus_uva.fits ! AN table 1: 299 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.72055 visibilities/baseline/integration-bin. ! Found source: J2015+4628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 31024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2015+4628_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 511 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 870 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 505 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1952 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998377Jy sigma=0.009046 ! Fit after self-cal, rms=0.957898Jy sigma=0.008706 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=4.632 mas, bpa=-23.28 degrees ! Estimated noise=1305.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333247 Jy ! Component: 100 - total flux cleaned = 0.0408284 Jy ! Total flux subtracted in 100 components = 0.0408284 Jy ! Clean residual min=-0.003828 max=0.004283 Jy/beam ! Clean residual mean=0.000001 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.0408284 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0408284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079714Jy sigma=0.000639 ! Fit after self-cal, rms=0.078508Jy sigma=0.000627 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=5.852 mas, bpa=-16.61 degrees ! Estimated noise=566.798 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550958 Jy ! Component: 100 - total flux cleaned = 0.00847663 Jy ! Component: 150 - total flux cleaned = 0.0102837 Jy ! Component: 200 - total flux cleaned = 0.0113889 Jy ! Total flux subtracted in 200 components = 0.0113889 Jy ! Clean residual min=-0.002879 max=0.004040 Jy/beam ! Clean residual mean=0.000006 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.0522173 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 27 components and 0.0522173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077994Jy sigma=0.000624 ! Fit after self-cal, rms=0.077914Jy sigma=0.000624 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.24 HN 1.08 KP 1.02 ! LA 1.00 MK 1.07 NL 0.85 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.21 HN 1.07 KP 0.92 ! LA 0.95 MK 1.08 NL 1.00* OV 1.00* ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.15 HN 0.99 KP 0.84 ! LA 0.83 MK 1.10 NL 0.92 OV 1.00* ! PT 1.01 ! ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 0.92 KP 1.00* ! LA 0.61 MK 0.71 NL 1.00* OV 1.00* ! PT 0.90 ! ! ! Fit before self-cal, rms=0.077914Jy sigma=0.000624 ! Fit after self-cal, rms=0.074329Jy sigma=0.000622 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.179 mas, bmaj=5.974 mas, bpa=-14.32 degrees ! Estimated noise=575.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763386 Jy ! Component: 100 - total flux cleaned = 0.000862656 Jy ! Component: 150 - total flux cleaned = 0.000896227 Jy ! Component: 200 - total flux cleaned = 0.000942395 Jy ! Total flux subtracted in 200 components = 0.000942395 Jy ! Clean residual min=-0.002445 max=0.003721 Jy/beam ! Clean residual mean=-0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.0531597 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 31 components and 0.0531597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074319Jy sigma=0.000622 ! Fit after self-cal, rms=0.074155Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074155Jy sigma=0.000620 ! Fit after self-cal, rms=0.073566Jy sigma=0.000619 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=5.975 mas, bpa=-13.6 degrees ! Estimated noise=574.338 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552014 Jy ! Component: 100 - total flux cleaned = 0.000609997 Jy ! Component: 150 - total flux cleaned = 0.000641 Jy ! Component: 200 - total flux cleaned = 0.000668274 Jy ! Total flux subtracted in 200 components = 0.000668274 Jy ! Clean residual min=-0.002020 max=0.003265 Jy/beam ! Clean residual mean=0.000012 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.053828 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.053828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073558Jy sigma=0.000619 ! Fit after self-cal, rms=0.073631Jy sigma=0.000618 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, -20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286889 Jy ! Component: 100 - total flux cleaned = 0.00428292 Jy ! Component: 150 - total flux cleaned = 0.00470759 Jy ! Component: 200 - total flux cleaned = 0.00483716 Jy ! Total flux subtracted in 200 components = 0.00483716 Jy ! Clean residual min=-0.001807 max=0.002580 Jy/beam ! Clean residual mean=0.000005 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0586651 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.0586651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073521Jy sigma=0.000617 ! Fit after self-cal, rms=0.073438Jy sigma=0.000616 ! Inverting map ! Added new window around map position (-14, 20). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253953 Jy ! Component: 100 - total flux cleaned = 0.00406349 Jy ! Component: 150 - total flux cleaned = 0.00520477 Jy ! Component: 200 - total flux cleaned = 0.00596234 Jy ! Total flux subtracted in 200 components = 0.00596234 Jy ! Clean residual min=-0.001764 max=0.001505 Jy/beam ! Clean residual mean=0.000005 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0646275 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 78 components and 0.0646275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073340Jy sigma=0.000615 ! Fit after self-cal, rms=0.073270Jy sigma=0.000615 ! Inverting map ! Added new window around map position (-32, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187362 Jy ! Component: 100 - total flux cleaned = 0.00303274 Jy ! Component: 150 - total flux cleaned = 0.00347663 Jy ! Component: 200 - total flux cleaned = 0.00376858 Jy ! Total flux subtracted in 200 components = 0.00376858 Jy ! Clean residual min=-0.001631 max=0.001533 Jy/beam ! Clean residual mean=0.000006 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.0683961 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.068396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073208Jy sigma=0.000615 ! Fit after self-cal, rms=0.073134Jy sigma=0.000614 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073134Jy sigma=0.000614 ! Fit after self-cal, rms=0.071546Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=5.976 mas, bpa=-12.55 degrees ! Estimated noise=565.823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148821 Jy ! Component: 100 - total flux cleaned = 0.00248706 Jy ! Component: 150 - total flux cleaned = 0.00313715 Jy ! Component: 200 - total flux cleaned = 0.00340084 Jy ! Total flux subtracted in 200 components = 0.00340084 Jy ! Clean residual min=-0.001455 max=0.001216 Jy/beam ! Clean residual mean=0.000005 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0717969 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 0.0717969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071507Jy sigma=0.000614 ! Fit after self-cal, rms=0.071416Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102699 Jy ! Component: 100 - total flux cleaned = 0.00135994 Jy ! Component: 150 - total flux cleaned = 0.00146486 Jy ! Component: 200 - total flux cleaned = 0.00151351 Jy ! Total flux subtracted in 200 components = 0.00151351 Jy ! Clean residual min=-0.001503 max=0.001246 Jy/beam ! Clean residual mean=0.000006 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0733104 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 123 components and 0.0733104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071392Jy sigma=0.000613 ! Fit after self-cal, rms=0.071360Jy sigma=0.000613 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071360Jy sigma=0.000613 ! Fit after self-cal, rms=0.070745Jy sigma=0.000613 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.195 mas, bmaj=9.394 mas, bpa=4.847 degrees ! Estimated noise=678.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119587 Jy ! Component: 100 - total flux cleaned = 0.00193474 Jy ! Component: 150 - total flux cleaned = 0.00212128 Jy ! Component: 200 - total flux cleaned = 0.00230962 Jy ! Total flux subtracted in 200 components = 0.00230962 Jy ! Clean residual min=-0.001505 max=0.001354 Jy/beam ! Clean residual mean=0.000009 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.07562 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.07562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070728Jy sigma=0.000613 ! Fit after self-cal, rms=0.070712Jy sigma=0.000613 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000505277 Jy ! Component: 100 - total flux cleaned = 0.000630238 Jy ! Component: 150 - total flux cleaned = 0.000720533 Jy ! Component: 200 - total flux cleaned = 0.000781456 Jy ! Total flux subtracted in 200 components = 0.000781456 Jy ! Clean residual min=-0.001462 max=0.001316 Jy/beam ! Clean residual mean=0.000010 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0764014 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 153 components and 0.0764015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070702Jy sigma=0.000613 ! Fit after self-cal, rms=0.070695Jy sigma=0.000613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=5.982 mas, bpa=-12.04 degrees ! Estimated noise=562.087 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 5.982 at -12.04 degrees (North through East) ! Clean map min=-0.0015588 max=0.044424 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=4.72 mas, bpa=-14.67 degrees ! Estimated noise=1311.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033495 Jy ! Component: 100 - total flux cleaned = 0.0432103 Jy ! Component: 150 - total flux cleaned = 0.0493878 Jy ! Component: 200 - total flux cleaned = 0.0536172 Jy ! Total flux subtracted in 200 components = 0.0536172 Jy ! Clean residual min=-0.003930 max=0.004207 Jy/beam ! Clean residual mean=0.000003 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0536172 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0536172 Jy ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=5.982 mas, bpa=-12.04 degrees ! Estimated noise=562.087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431506 Jy ! Component: 100 - total flux cleaned = 0.00746845 Jy ! Component: 150 - total flux cleaned = 0.0100493 Jy ! Component: 200 - total flux cleaned = 0.01223 Jy ! Total flux subtracted in 200 components = 0.01223 Jy ! Clean residual min=-0.002249 max=0.002271 Jy/beam ! Clean residual mean=0.000009 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0658472 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 49 components and 0.0658471 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.195 mas, bmaj=9.394 mas, bpa=4.847 degrees ! Estimated noise=678.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284803 Jy ! Component: 100 - total flux cleaned = 0.00489044 Jy ! Component: 150 - total flux cleaned = 0.00646953 Jy ! Component: 200 - total flux cleaned = 0.00730246 Jy ! Total flux subtracted in 200 components = 0.00730246 Jy ! Clean residual min=-0.001975 max=0.001830 Jy/beam ! Clean residual mean=0.000013 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0731496 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583852 Jy ! Component: 100 - total flux cleaned = 0.00109474 Jy ! Component: 150 - total flux cleaned = 0.00140856 Jy ! Component: 200 - total flux cleaned = 0.00169198 Jy ! Total flux subtracted in 200 components = 0.00169198 Jy ! Clean residual min=-0.001702 max=0.001462 Jy/beam ! Clean residual mean=0.000011 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0748416 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 83 components and 0.0748416 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=5.982 mas, bpa=-12.04 degrees ! Estimated noise=562.087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117265 Jy ! Component: 100 - total flux cleaned = 0.00034467 Jy ! Component: 150 - total flux cleaned = 0.000513922 Jy ! Component: 200 - total flux cleaned = 0.000667516 Jy ! Total flux subtracted in 200 components = 0.000667516 Jy ! Clean residual min=-0.001393 max=0.001250 Jy/beam ! Clean residual mean=0.000005 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0755091 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 99 components and 0.0755091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070709Jy sigma=0.000613 ! Fit after self-cal, rms=0.070679Jy sigma=0.000613 wmodel J2015+4628_S_2017_10_09_pus_map.mod ! Writing 99 model components to file: J2015+4628_S_2017_10_09_pus_map.mod wobs J2015+4628_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2015+4628_S_2017_10_09_pus_uvs.fits wwins J2015+4628_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J2015+4628_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000494332 Jy ! Component: 100 - total flux cleaned = -0.000497164 Jy ! Component: 150 - total flux cleaned = -0.000496064 Jy ! Component: 200 - total flux cleaned = -0.000456139 Jy ! Component: 250 - total flux cleaned = -0.000437528 Jy ! Component: 300 - total flux cleaned = -0.000382818 Jy ! Component: 350 - total flux cleaned = -0.000382343 Jy ! Component: 400 - total flux cleaned = -0.00038253 Jy ! Component: 450 - total flux cleaned = -0.000366621 Jy ! Component: 500 - total flux cleaned = -0.000319004 Jy ! Component: 550 - total flux cleaned = -0.000273464 Jy ! Component: 600 - total flux cleaned = -0.000332998 Jy ! Component: 650 - total flux cleaned = -0.000303259 Jy ! Component: 700 - total flux cleaned = -0.000274547 Jy ! Component: 750 - total flux cleaned = -0.000232861 Jy ! Component: 800 - total flux cleaned = -0.000151658 Jy ! Component: 850 - total flux cleaned = -0.00012506 Jy ! Component: 900 - total flux cleaned = -9.9259e-05 Jy ! Component: 950 - total flux cleaned = -8.6598e-05 Jy ! Component: 1000 - total flux cleaned = -4.90087e-05 Jy ! Component: 1050 - total flux cleaned = -1.19781e-05 Jy ! Component: 1100 - total flux cleaned = 1.23677e-05 Jy ! Component: 1150 - total flux cleaned = 9.60812e-05 Jy ! Component: 1200 - total flux cleaned = 8.42221e-05 Jy ! Component: 1250 - total flux cleaned = 0.000130663 Jy ! Component: 1300 - total flux cleaned = 0.000176288 Jy ! Component: 1350 - total flux cleaned = 0.000176183 Jy ! Component: 1400 - total flux cleaned = 0.000187339 Jy ! Component: 1450 - total flux cleaned = 0.000198372 Jy ! Component: 1500 - total flux cleaned = 0.000209176 Jy ! Component: 1550 - total flux cleaned = 0.00021984 Jy ! Component: 1600 - total flux cleaned = 0.000251644 Jy ! Component: 1650 - total flux cleaned = 0.000220344 Jy ! Component: 1700 - total flux cleaned = 0.000210139 Jy ! Component: 1750 - total flux cleaned = 0.0001898 Jy ! Component: 1800 - total flux cleaned = 0.000179709 Jy ! Component: 1850 - total flux cleaned = 0.000159783 Jy ! Component: 1900 - total flux cleaned = 0.000159762 Jy ! Component: 1950 - total flux cleaned = 0.000140134 Jy ! Component: 2000 - total flux cleaned = 0.000101357 Jy ! Component: 2050 - total flux cleaned = 0.00010153 Jy ! Component: 2100 - total flux cleaned = 0.000101603 Jy ! Component: 2150 - total flux cleaned = 0.00011104 Jy ! Component: 2200 - total flux cleaned = 0.000110998 Jy ! Component: 2250 - total flux cleaned = 0.000120271 Jy ! Component: 2300 - total flux cleaned = 0.00011109 Jy ! Component: 2350 - total flux cleaned = 0.000111115 Jy ! Component: 2400 - total flux cleaned = 0.000138306 Jy ! Component: 2450 - total flux cleaned = 0.00012033 Jy ! Component: 2500 - total flux cleaned = 0.000147108 Jy ! Component: 2550 - total flux cleaned = 0.00012944 Jy ! Component: 2600 - total flux cleaned = 0.000146955 Jy ! Component: 2650 - total flux cleaned = 0.000155749 Jy ! Component: 2700 - total flux cleaned = 0.000198811 Jy ! Component: 2750 - total flux cleaned = 0.000207394 Jy ! Component: 2800 - total flux cleaned = 0.000232811 Jy ! Component: 2850 - total flux cleaned = 0.000258104 Jy ! Component: 2900 - total flux cleaned = 0.000308167 Jy ! Component: 2950 - total flux cleaned = 0.000316423 Jy ! Component: 3000 - total flux cleaned = 0.000341062 Jy ! Component: 3050 - total flux cleaned = 0.000390198 Jy ! Component: 3100 - total flux cleaned = 0.000398348 Jy ! Component: 3150 - total flux cleaned = 0.000414549 Jy ! Component: 3200 - total flux cleaned = 0.000446613 Jy ! Component: 3250 - total flux cleaned = 0.000462469 Jy ! Component: 3300 - total flux cleaned = 0.000494023 Jy ! Component: 3350 - total flux cleaned = 0.000517581 Jy ! Component: 3400 - total flux cleaned = 0.000548812 Jy ! Component: 3450 - total flux cleaned = 0.000572015 Jy ! Component: 3500 - total flux cleaned = 0.000556652 Jy ! Component: 3550 - total flux cleaned = 0.000579604 Jy ! Component: 3600 - total flux cleaned = 0.000587258 Jy ! Component: 3650 - total flux cleaned = 0.000602381 Jy ! Component: 3700 - total flux cleaned = 0.000647491 Jy ! Component: 3750 - total flux cleaned = 0.000662346 Jy ! Component: 3800 - total flux cleaned = 0.000662384 Jy ! Component: 3850 - total flux cleaned = 0.000691845 Jy ! Component: 3900 - total flux cleaned = 0.000691794 Jy ! Component: 3950 - total flux cleaned = 0.000684482 Jy ! Component: 4000 - total flux cleaned = 0.000677236 Jy ! Component: 4050 - total flux cleaned = 0.00069889 Jy ! Total flux subtracted in 4096 components = 0.000677356 Jy ! Clean residual min=-0.000394 max=0.000490 Jy/beam ! Clean residual mean=0.000002 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.0761865 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 358 components and 0.0761865 Jy ![Exited script file: muppet] wmap "J2015+4628_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 5.982 at -12.04 degrees (North through East) ! Clean map min=-0.0013045 max=0.044556 Jy/beam ! Writing clean map to FITS file: J2015+4628_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0445555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126546 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.852057 0.852057 1.70411 3.40823 6.81646 13.6329 27.2658 54.5317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.044 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 5.982 at -12.04 degrees (North through East) ! Clean map min=-0.0013045 max=0.044556 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2015+4628_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:19:56 2019